Islamic University of Technology
A subsidiary organ of Organisation of Islamic Cooperation(OIC)

Publications

2025 (89)

Afroza Akter, A. K. Azad*, ABM Shahadat Hossain, Salma Parvin, "Numerical methods for option valuation: A bibliometric review of current trends to future directions", Social Sciences & Humanities Open, Elsevier Publication, Vol. 12, Page. 101785, 2025, [Indexed in Scopus (Cite Score 4.3), SJR Q1]. https://doi.org/10.1016/j.ssaho.2025.101785

Salma Parvin, Md Mazidul Islam, A. K. Azad, Afroza Akter, "Coupled Heat Transfer Inside a Thick‐Walled Structure With an Inner Open Cavity: A Numerical Approach", Engineering Reports, John Wiley & Sons, Inc Publisher, Vol. 7(7), Page e70314, 2025. [Indexed in ESCI (IF:2 in 2024), Scopus (Cite Score 4.1), SJR Q2]. https://doi.org/10.1002/eng2.70314

RM Ziaur, MN Hudha, M Al-Amin, A K Azad*, MF Karim, Md Nasir Uddin, MM Rahman, MJH Munshi, "Artificial Neural Network Prediction on MHD Conjugate Heat Transfer within a Prismatic Chamber Consisting of CNT-Al2O3/H2O Hybrid Nanofluid" Iran J Sci Technol Trans Mech Eng, Springer Nature Publisher, [Indexed in ESCI (IF:1.7 in 2024), Scopus (Cite Score 3.4), SJR Q2].https://doi.org/10.1007/s40997-025-00893-z

Salma Parvin, Raita Rahman, Thonoya Arobi, Afroza Akter, A K Azad*, "Numerical Analysis on Burn Injury of Human Skin Exposed to Varying Flash Fire Conditions", Engineering Reports, John Wiley & Sons, Inc Publisher, Vol. 7(7), Page e70278, 2025. [Indexed in ESCI (IF:2 in 2024), Scopus (Cite Score 4.1), SJR Q2]. https://doi.org/10.1002/eng2.70278

R. M. Ziaur, M. H. Surovy, M. Al-Amin, A. K. Azad*, M. K. Das, M. S. R. Chowdhury, M. M. Rahman, “Optimizing heat transfer in circular heat exchanger with hybrid nanofluid using response surface methodology”, Thermal Science and Engineering Progress, Elsevier publication, June 2025, Vol. 64, P. 103766. [Indexed in SCIE (IF:5.4 in 2024), Scopus (Cite Score 7.3), SJR Q1] https://doi.org/10.1016/j.tsep.2025.103766

S. Parvin, M. M. Rahman, R. Nasrin, A. Akter, A. K. Azad, “Finite element modeling of receiver tube of a parabolic trough solar concentrator: performance analysis”, Journal of Physics: Conference Series, IOP publication, June 2025, Vol. 3042(1), 012028, ICAPM 2025, Tokyo, Japan. [Indexed in Scopus (Cite Score 0.44), SJR Q4]. https://doi.org/10.1088/1742-6596/3042/1/012028

Khadiza Begum, A. K. Azad, Salma Parvin, “MHD combined convection in a lid-driven cavity with a heat-conducting solid using nanofluid”, AIP Conference Proceedings, American Institute of Physics (AIP) publication, April 2025, Vol. 3307(1), 020008, DUET, Bangladesh. [Indexed in Scopus (Cite Score 0.5)]. https://doi.org/10.1063/5.0271925

Highly Effective Removal of Moxifloxacin from Aqueous Solutions Using Graphene Oxide Functionalized with Sodium Dodecyl Sulfate, ACS Sustainable Resource Management, Md Humayun Kabir, Md Jalil Miah, Abdul Kader Mohiuddin, Md Sanwar Hossain, Bushra Parvin Upoma, Md Aftab Ali Shaikh, Md Yeasin Pabel, Fahima Mojumder, Rashed Mahmud, Nazmul Islam Tanvir, Sabina Yasmin, https://doi.org/10.1021/acssusresmgt.4c00296

Mechanical and Production Engineering

Md Maruf Ahmed, M Monjurul Ehsan, “Design and performance Assessment of Straight, Zigzag, and airfoil fin configurations in 100 kW supercritical CO2 PCHE for enhanced Pre-Cooler application”, Energy Conversion and Management X (2025) 101248 Impact factor-8.8, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174525003800

Azmain Rashid Raiyan, Sami Uzzaman, M. Monjurul Ehsan, Yasin Khan, “Energy, exergy, exergoeconomic (3E) analyses and ANN-based multi-objective optimization of novel vortex tube and turbo-expander enhanced transcritical CO2 cogeneration cycles”, Energy Conversion and Management 345 (2025) 120385 Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890425009094

Azmain Rashid Raiyan, M Muhtasim Uzzaman, M Monjurul Ehsan, Yasin Khan, “Exergoeconomic assessment of a novel ejector recompression absorption cycle integrated with flash tank enhanced compression refrigeration cycle: ANN assisted genetic algorithm optimization”, Energy Conversion and Management X (2025) 101208 Impact factor-8.8, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S259017452500340X

Tarif Shahriar, Mohammad Muhtasim Mashfy, "Exploring Biogas Production from Fallen Leaves through Co- Digestion Methods," IUT JOURNAL OF ENGINEERING AND TECHNOLOGY (JET), Special issue (IUT-ICCET), Vol. 19 No. 3 (2025), Page-959-967. https://jet.iutoic-dhaka.edu/index.php/jet

Exploring the barriers to decarbonizing the transportation system: A pathway to a cleaner future in emerging economies

Imrul Kayes, Mahdi Hafiz Nabil, M. Monjurul Ehsan, M. Ahsan Habib, Yasin Khan, “Advanced exergy analysis and machine learning based multi-objective optimization of a modified triple cascade refrigeration system for enhanced performance”, Applied Thermal Engineering (2025) 126661. Impact factor-6.1, Cite Score-11.3, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S1359431125012530

Azmain Rashid Raiyan, Samiuzzaman, Yasin Khan, M Monjurul Ehsan, Md Rezwanul Karim, Sefat Mahmud Siddique, “Exergoeconomic Analysis and Multi Objective Optimization of a Nuclear Driven Integrated Cooling and Power Cycle using Response Surface Regression Modeling Coupled with Genetic Algorithm”, Energy Conversion and Management 337 (2025) 119836 Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890425003590

Shakhawat Hossain Sarker, Md Sameeul Amin, Nurul Abrar, M. Monjurul Ehsan, Yasin Khan, “Sustainable Solar Dish Based CSP-Fossil Operated Hybrid Power Plant with Thermal Energy Storage Utilizing Triple Extraction Steam and Organic Rankine Cycles”, Energy Conversion and Management X (2025) 101084 Impact factor-8.8, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174525002168

I. Kayes, M. H. Nabil, M. M. Ehsan, M. A. Habib, and Y. Khan, “Advanced exergy analysis and machine learning based multi-objective optimization of a modified triple cascade refrigeration system for enhanced performance,” Appl Therm Eng, vol. 274, p. 126661, Sep. 2025, doi: 10.1016/j.applthermaleng.2025.126661.

Fatima Tasneem Mohsin , Nazmul Hossain , Tamzeed Ahmed Alvy , Tasnuva Sharmin , Md Azazul Haque, Mohammad Muhtasim Mashfy , Mohammed Mousa , Mohammad Nasim “Exploring the limitations and unlocking the potential of sodium-ion battery cathodes”, Materials Today Energy, Volume 50, June 2025, 101868. Cite Score-15.1, Impact factor- 9 SJR rank-Q-1 https://doi.org/10.1016/j.mtener.2025.101868 https://www.sciencedirect.com/science/article/pii/S2468606925000760#da0010

RA Rinik, AA Bhuiyan, MR Karim, Enhancement of heat transfer using elliptical twisted inner pipe with convergent conical ring turbulator for turbulent flow in double pipe heat exchanger, International Journal of Thermal Sciences, Volume 210, April 2025, Ref. 109558, https://doi.org/10.1016/j.ijthermalsci.2024.109558 (Impact Factor: 4.9, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Tausif Elahi Khan, Sakibul Haque Sakib, Nazmus Sakib, Tanvir Hossain, M Monjurul Ehsan, Yasin Khan, “Multi-Objective Optimization of a Cascaded Supercritical CO2 Brayton Cycle with Ejector-Enhanced Transcritical CO2 and Flash Tank Absorption Refrigeration Cycles” Energy Conversion and Management X (2025) 100988 Impact factor-8.8, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174525001205

F. T. Mohsin, N. Hossain, T. A. Alvy, T. Sharmin, M. A. Haque, M. M. Mashfy, M. Mousa, M. Nasim, Exploring the Limitations and Unlocking the Potential of Sodium-Ion Battery Cathodes, Materials Today Energy, 101868 (2025). doi.org/10.1016/j.mtener.2025.101868.

Md Maruf Ahmed, Salim Sadman Bishal, M Monjurul Ehsan, Yasin Khan, “Multi-effect distillation with novel liquid vapor ejector utilizing the waste heat from intercoolers of a single mixed refrigerant cycle for natural gas liquefaction”, Cleaner Energy Systems, Volume 10, June 2025, 100182, Cite Score-3.1. https://www.sciencedirect.com/science/article/pii/S2772783125000147

Md Maruf Ahmed, Salim Sadman Bishal, M Monjurul Ehsan, Yasin Khan, “Multi-effect distillation with novel liquid vapor ejector utilizing the waste heat from intercoolers of a single mixed refrigerant cycle for natural gas liquefaction”, Cleaner Energy Systems, Volume 10, June 2025, 100182, Cite Score-3.1. https://www.sciencedirect.com/science/article/pii/S2772783125000147

Sefat Mahmud Siddique, M. Muhtasim Uzzaman, M. Monjurul Ehsan, Yasin Khan, “Thermal analysis of a novel configuration of double effect absorption system cascaded with ejector and injection enhanced compression refrigeration cycle”, Energy Conversion and Management 326 (2025) 119435 Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890424013761

Hamim, H. R., Hasan, T., Shahriar, F., Chowdhury, S. R., Rahman, Md. A., Nasim, M., & Habib, M. A. (2025). Basalt-silk fiber reinforced PLA composites: Effect of graphene fillers and stacking sequence. In Composites Part C: Open Access (Vol. 16, p. 100564). Elsevier BV. https://doi.org/10.1016/j.jcomc.2025.100564

H. R. Hamim, T. Hasan, F. Shahriar, S. R. Chowdhury, M. A. Rahman, M. Nasim, M. A. Habib, Basalt-Silk Fiber Reinforced PLA Composites: Effect of Graphene Fillers and Stacking Sequence, Composites Part C: Open Access, 16: 100564 (2025). doi.org/10.1016/j.jcomc.2025.100564

Chowdhury Sadid Alam, Vahid Karami, M. Shafiqur Rahman, 2024, “Thermo-Mechanical Response of High-Entropy Aluminum Alloy in the Additive Friction Stir Deposition Process”, Additive Manufacturing Letters, January 2025, 12, p. 100263

Sefat Mahmud Siddique, M. Muhtasim Uzzaman, M. Monjurul Ehsan, Yasin Khan, “Thermal analysis of a novel configuration of double effect absorption system cascaded with ejector and injection enhanced compression refrigeration cycle”, Energy Conversion and Management 326 (2025) 119435 Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890424013761

Tausif Elahi Khan, Masruf Zaman, M Monjurul Ehsan, Yasin Khan, “Thermal analysis of a main compression intercooling supercritical CO2 cycle cascaded with flash tank enhanced compression-absorption refrigeration cycle”, Energy Conversion and Management X (2025) 100868 Impact factor-8.8, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174524003465

Tausif Elahi Khan, Masruf Zaman, M Monjurul Ehsan, Yasin Khan, “Thermal analysis of a main compression intercooling supercritical CO2 cycle cascaded with flash tank enhanced compression-absorption refrigeration cycle”, Energy Conversion and Management X (2025) 100868 Impact factor-8.8, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174524003465

Electrical and Electronic Engineering

Md. Ikrama Hossain, Tasnia Nafs, Sakif Yeaser, Asif Newaz, "Multi-Year Dataset on Daily Electricity Demand, Generation, Load Shedding, and External Conditions in Bangladesh," Data in Brief, 2025, 112014, ISSN 2352-3409, https://doi.org/10.1016/j.dib.2025.112014

Rahman MdS, Rimi MM. Optimal positioning of 5G base stations in different cellular networks: An adaptive moth flame optimization based approach. Intelligent Decision Technologies. 2025. doi:10.1177/18724981251357181

A. Zeesan, A. Fahim, M. M. Ahmed, S. Chowdhury and A. Newaz, "Analysis of Pre-trained CNN Models in MRI-Based Brain Tumor Detection," 2024 27th International Conference on Computer and Information Technology (ICCIT), Cox's Bazar, Bangladesh, 2024, pp. 867-872, doi: 10.1109/ICCIT64611.2024.11022162.

Md Sanowar Hosen, Md Rezaul Hoque Khan, Mohammad Rakibul Islam, Nafiz Imtiaz Bin Hamid, Atiqul Alam Chowdhury, Md. Dara Abdus Satter, Md. Rezwanul Ahsan, Mhamud Hasan Mim, Naimur Rahman, Sidrat Muntaha Nur Pranto, "Square-shaped SPR-PCF for prostate cancer detection: A new dimension in bio-sensing", in Sensing and Bio-Sensing Research, May 2025. DOI: https://doi.org/10.1016/j.sbsr.2025.100802

Rahman, Md Samiur, Mohammad Tawhid Kawser, and Maisha Mahbub Rimi. "Secrecy rate enhancement in MIMO Networks in the presence of MIMO-capable eavesdropper using a hybrid optimization approach." Physical Communication (2025): 102701. https://doi.org/10.1016/j.phycom.2025.102701

"High-performance demultiplexer-based lab-on-bio-chip sensor leveraging silicon photonics for point-of-care detection of hemoglobin and blood calcium ion levels", (Optics Express, Q1). DOI: https://doi.org/10.1364/OE.554834

M. M. Ananda, Muhammad, F. Sohel and S. T. Nushin, “Optimizing Floating Photovoltaic System Design: A Multi-objective Approach for Environmental and Economic Sustainability’ presented at the 3rd International Conference on Integrated Circuits and Communication Systems (ICICACS), Bangalore, India, Feb 21-22, 2025.

"High-performance demultiplexer-based lab-on-bio-chip sensor leveraging silicon photonics for point-of-care detection of hemoglobin and blood calcium ion levels", (Optics Express, Q1, Impact factor: 3.2). DOI: https://doi.org/10.1364/OE.554834

Apon, H. J., Ahmed, A., Adib, A. U., & Ahshan, R. (2025). Integrated planning of emission reduction based unit commitment and generation dispatch solution for Sustainable Power System. Electric Power Systems Research, 244, 111535. https://doi.org/10.1016/j.epsr.2025.111535

Sheikh Montasir Mahbub, Abdullah Al Mahmud Nafiz, Rakibul Hasan Sagor, Advanced refractive index sensing through ultra-short pulse compression in hollow core photonic crystal fiber, Materials Today Electronics, Volume 11, 2025, 100137, ISSN 2772-9494, https://doi.org/10.1016/j.mtelec.2025.100137.

N. Ahmed, M.F. Adnan, A. Shafiullah, H.J. Parash, Md.S. Rahman, I.C. Akib, G. Sarowar, "Digitize-HCD: A dataset for digitization of handwritten circuit diagrams," Data in Brief, vol. 59, p. 111315, Apr. 2025, doi: 10.1016/j.dib.2025.111315

"Advancing optomechanical sensing: Novel CMOS-compatible plasmonic pressure sensor with Silicon-Insulator-Silicon waveguide configuration", (Optics Communications, Q2, Impact factor: 2.2). DOI: https://doi.org/10.1016/j.optcom.2025.131495

Hossain, S., Arika, A. M., Fahim, I. N., Uddin, J., Ahmed, A., Apon, H. J., & Hoque, M. A. (2025). Enhancing solar panel performance: A machine learning approach to dust detection and automated water sprinkle-based cleaning strategy. Solar Energy, 287, 113240. https://doi.org/10.1016/j.solener.2025.113240

Technical and Vocational Education

Adamu, I., Khan, M. S. H., & Hasan, M. (2025, 30 July-1 Aug. 2025). Engineering Students’ Experience on Project-Based Learning: A phenomenographic investigation. 2025 10th International STEM Education Conference (iSTEM-Ed), Pattaya, Thailand.

Salele, N., Hossain, K. M. S., & and Hasan, M. Exploring conceptions of electromagnetic wave propagation among microwave engineering students: a phenomenographic study. European Journal of Engineering Education, 1-22. https://doi.org/10.1080/03043797.2025.2521330

Salele, N., Khan, M. S. H., Hasan, M., & Ali, S. (2025). Advancing Four-Tier Diagnostic Assessments: A Novel Approach to Mapping Engineering Students’ Conceptual Understanding in Microwave Engineering Course. IEEE Access.

Khan, M. S. H., & Hasan, M. (2025). Blended Learning Designs for Student-Centered Teaching: Twenty-First-Century Skills Development in Technical Education. In P. K. Misra, S. Mishra, & S. Panda (Eds.), Case Studies on Blended Learning in Higher Education: Design, Development, and Delivery (pp. 139-156). Springer Nature Singapore. https://doi.org/10.1007/978-981-96-0722-8_8

Usman, A., Hasan, M., & Nurul Alam, M. (2025). Factors influencing student migration to Bangladesh: Mediating effect of host country support and moderating effect of geographical location and gender. Social sciences & humanities open, 11, 101272. https://doi.org/https://doi.org/10.1016/j.ssaho.2024.101272

Computer Science and Engineering

S. R. Raiyan and M. H. Kabir, “SCReedSolo: A Secure and Robust LSB Image Steganography Framework with Randomized Symmetric Encryption and Reed-Solomon Coding,” in 8th Asian Conference on Pattern Recognition (ACPR 2025), November 2025. [Accepted]

S. Ahmed, M. B. Hasan, T. Ahmed, and M. H. Kabir, “DExNet: Combining Observations of Domain Adapted Critics for Leaf Disease Classification with Limited Data,” in 8th Asian Conference on Pattern Recognition (ACPR 2025), November 2025. [Accepted]

Nafisa Sadaf Hriti, Karishma Shaer, Farhan M Nafis Momin, Md. Kamrul Hasan, Hasan Mahmud, "Autism Classification using Visual and Behavioral Data ", International Journal of Engineering and Technology (JET), IUT, Vol. 19, No. 3 , Pages 968-977, 2025.

A. F. Ashrafi and M. H. Kabir, ‘An Enhanced Graph Convolutional Network using Chebyshev Spectral Graph and Graph Attention for Autism Spectrum Disorder Classification,” in 6th International Conference on Electrical, Communication and Computer Engineering (ICECCE), Turkey, August 2025. [Accepted]

Syed Fateen Navid Haider, Tafsir Md. Rubaiyat Rahman, Mohsina Tabassum Rifa, Kaniz Fatema, Md. Ridwan Kabir, Hasan Mahmud, Md. Kamrul Hasan, "Autism Detection Using Webcam-Based Gaze Tracking", International Journal of Engineering and Technology (JET), IUT, Vol. 19, No. 3 , Pages 723-731, 2025.

Sk Nahid Sanwar, Tansif Anzar, Md. Tariquzzaman, Md. Kamrul Hasan, Hasan Mahmud, "An Attention-Based ALBERT Model for Mental Health Studies", International Journal of Engineering and Technology (JET), IUT, Vol. 19, No. 3 , Pages 681-694, 2025.

Syed Rifat Raiyan and Md. Hasanul Kabir. 2025. SCReedSolo: A Secure and Robust LSB Image Steganography Framework with Randomized Symmetric Encryption and Reed-Solomon Coding. Proceedings of the 8th Asian Conference on Pattern Recognition, Gold Coast, Queensland, Australia. International Association for Pattern Recognition. DOI: 10.48550/arXiv.2503.12368

Syed Rifat Raiyan, Zibran Zarif Amio, and Sabbir Ahmed. 2025. HaSPeR: An Image Repository for Hand Shadow Puppet Recognition. In Proceedings of the IEEE/CVF International Conference on Computer Vision (ICCV) Workshops (WCCA Oral), Honolulu, Hawaii, United States of America (USA). Institute of Electrical and Electronics Engineers (IEEE). DOI: 10.48550/arXiv.2408.10360

CASL-W60: A Word-Level Dataset for Central African Sign Language Recognition. Data in Brief. doi: https://doi.org/10.1016/j.dib.2025.111790. https://authors.elsevier.com/sd/article/S2352-3409(25)00517-7

An Attention-Based ALBERT Model for Mental Health Studies. 1st IUT- ICCET Gazipur, Dhaka, Bangladesh, 25-27 April 2025

Autism Classification using Visual and Behavioral Data. 1st IUT- ICCET Gazipur, Dhaka, Bangladesh, 25-27 April 2025

Autism Detection with Technology-driven Gaze Tracking. 1st IUT- ICCET Gazipur, Dhaka, Bangladesh, 25-27 April 2025

Mwaka Lucky, Njayou Youssouf, Hasan Mahmud, Md Kamrul Hasan, "CASL-W60: A word-level dataset for central African sign language recognition", Data in Brief, Volume 61, 2025, 111790, ISSN 2352-3409, https://doi.org/10.1016/j.dib.2025.111790. (https://www.sciencedirect.com/science/article/pii/S2352340925005177) [Web of Science/ESCI/Scopus, IF: 1.4] [Q3: Multidisciplinary, Computer Science]

Sk Nahid Sanwar, Tansif Anzar, Md. Tariquzzaman, Md. Kamrul Hasan, and Hasan Mahmud*, "An Attention-Based ALBERT Model for Mental Health Studies", 1st IUT International Conference on Core Engineering and Technology (IUT-ICCET), 25-27 April 2025, Islamic University of Technology (IUT), Gazipur, Dhaka, Bangladesh.

Nafisa Sadaf Hriti, Karishma Shaer, Farhan M Nafis Momin, Md. Kamrul Hasan, and Hasan Mahmud*, "Autism Classification using Visual and Behavioral Data", 1st IUT International Conference on Core Engineering and Technology (IUT-ICCET), 25-27 April 2025, Islamic University of Technology (IUT), Gazipur, Dhaka, Bangladesh.

Syed Fateen Navid Haider, Tafsir Md. Rubaiyat Rahman, Mohsina Tabassum Rifa, Kaniz Fatema, Md. Ridwan Kabir, Dr. Hasan Mahmud*, Dr. Md. Kamrul Hasan*, "Autism Detection with Technology-driven Gaze Tracking", 1st IUT International Conference on Core Engineering and Technology (IUT-ICCET), 25-27 April 2025, Islamic University of Technology (IUT), Gazipur, Dhaka, Bangladesh.

Husne Ara Rubaiyeat, Hasan Mahmud, Ahsan Habib, Md Kamrul Hasan, "BdSLW60: A Word-Level Bangla Sign Language Dataset". Multimedia Tools and Appcliations, Springer Nature, 14 April 2025, https://doi.org/10.1007/s11042-025-20792-4 [Web of Science/SCIE/Scopus, IF: 3.0] [Q1: Computer Science, Media Technology]

BdSLW60: A Word-Level Bangla Sign Language Dataset. Multimedia Tools and Applications. DOI: 10.1007/s11042-025-20792-4. Preprint link: https://rdcu.be/ehJ97

Tarannum Shaila Zaman et al. "Gender Dynamics in Software Engineering: Insights from Research on Concurrency Bug Reproduction". Southeast Conference, pp 643-648. 2025

Afsana Mimi et al., "Personal Thermal Assessment Using Feature Reduction and Machine Learning Techniques". Activity, Behavior, and Healthcare Computing, pp 179-188. 2025

Nazmus Sakib, G. M. Shahariar, Md. Mohsinul Kabir, Md. Kamrul Hasan, Hasan Mahmud, "Towards automated recipe genre classification using semi-supervised learning". PLOS ONE 20(1): e0317697. https://doi.org/10.1371/journal.pone.0317697, 28 January 2025 [Web of Science/SCIE/Scopus, IF: 3.752] [Q1: Multidisciplinary, Computer Science]

Towards automated recipe genre classification using semi-supervised learning. PLOS one. doi: https://doi.org/10.1371/journal.pone.0317697

Civil & Environmental Engineering

Determinants of Active Transport in Emerging Megacities: A Bayesian Belief Network Framework for Sustainable Mobility Solutions

Kabir, M. E., Khan, M. R., Hasanuzzaman, M., Hossain, M., Rifaat, S. M. Understanding the Causes Behind Horn Usage Of Private Car Drivers Near Hospitals. Paper published in the Proceedings of 1st International Conference on Core Engineering andTechnology (IUT-ICCET 2024), 25-27 April 2025, IUT.

Hassan, M. I. S., Ayon, A. K. M., Hossain, M., Basunia, A., Rifaat, S. M. (2024). A Study of Vehicle-Pedestrian Jaywalking Interactions at Median Road Locations in Dhaka City, Bangladesh: Using YOLOV8 and Image Processing Techniques. Paper published in the Proceedings of 7th International Conference on Advances in Civil Engineering (ICACE2024), 12-14 December 2024, CUET, Chattogram, Bangladesh.

Khatun, R., Aditya, M. T., Rifaat, S.M., Mahmud, R. (2025). A quantitative analysis of assessing passengers’ satisfaction level of inter-city train services in Bangladesh. Case Studies on Transport Policy, Volume 21, 101477. https://doi.org/10.1016/j.cstp.2025.101477 (Scopus Indexed Journal-Q2)

Basunia, A., Hossain Anchal, T., Tasnim, J., Ahmed, N., Zannat Mahzabeen, T., Rifaat, S. M. (2025). Exploring Factors Influencing Jaywalking to Promote Safe and Active Travel to School Among Dhaka City Adolescent Students. Journal of Road Safety, 36(2), 47–62. https://doi.org/10.33492/JRS-D-25-1-2470690 (Scopus Indexed Journal-Q3)

Sadeek, S. N., Rahman, M. H., Rifaat, S. M. (2025).Understanding pedestrian bridge usage considering perception and socio-demographic characteristics of the road users in Dhaka city. Transportation Research Interdisciplinary Perspectives, Vol. 31. 101384. https://doi.org/10.1016/j.trip.2025.101384 (Scopus Indexed Journal-Q1)

Rahman, M. H., Rifaat, S. M., Sadeek, S. N., Wang, D. (2024). Gated Ensemble of Spatio-temporal Mixture of Experts for Multi-task Learning in Ride-hailing System. Multimodal Transportation, Vol. 3, Issue 4, 100166. https://doi.org/10.1016/j.multra.2024.100166 (SCOPUS Indexed Journal-Q1)

Gender Difference in Active Transport Uptake in Context of a Developing Megacity

Business and Technology Management

Shohan, S.H., Bitto, A.K., Biplob, K.B.M.B., Ullah, M.A., Azad, M.A.K., Masum, A.K.M., “Price Prediction in Cryptocurrencies: Evaluating the Efficacy of a Hybrid LSTM-SRNN Model”, Presented at the 16th International Conference on Computing, Communication and Networking Technologies (ICCCNT), IIT - Indore, Madhya Pradesh, India, July 6 - 11, 2025,

Akhter, H., Rupa, R. A., Sultana, A., Nasrin, F., Saif, A. N. M., & Hossain, M. N. (2025). Gravitating Towards Blockchain in Sustainable Higher Education: A Hybrid SEM-ANN Technique. Discover Sustainability, Springer [Wos (IF-3), Scopus (CiteScore: 2.6), Q1].

Kumar, N., Korsakiene, R., & Hossain, M. N. (2025). The nexus between AI-oriented leadership and non-technical employees’ AI-driven innovation engagement. In The transformative power of artificial intelligence in learning and development. Apple Academic Press, CRC Press, Taylor & Francis Group.[Scopus]

Abir, J.N., Masum, A.K.M., Gunasekaran, A., Chowdhury M.A.F., Azad, M.A.K., "Navigating the Blockchain Frontier: A DEMATEL-Based Analysis of Adoption Challenges in Business." 10th International Conference on Information and Communication Technology for Intelligent Systems, 23 - 24 May 2025, New York, USA,

Hossain M.N. (Corresponding Author), Imdadullah Hidayat-ur-Rehman, Abul Bashar Bhuiyan, Hamdan Mohd Salleh (2025). "Evaluating the Influence of IT Governance, Fintech Adoption, and Financial Literacy on Sustainable Performance". Journal of Studies in Economics and Finance. CABS, ABDC, ESCI, Scopus (Q1). WoS (2.3), Cite Score (4.7). DOI: 10.1108/SEF-10-2024-0672.

Azad, M.A.K., Akhter, T., Saona, P., Mosqueira, P. and Ahmad, N. (2025), "Corporate governance, national culture and bank performance: evidence from MENA countries", International Journal of Islamic and Middle Eastern Finance and Management, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/IMEFM-04-2024-0185 [Indexed in SSCI (IF 2.9), Scopus (Cite Score 5.4), ABDC (Rating B), CABS in level 1]

Penella, D. A. B., Schmitz, F. R., Tan, Y., Antunes, J., Wanke, P., M Julkar Naeen Abir, S., and Abul Kalam Azad, M. (2025). Strategic fit of potential M.As between dual banks and conventional banks: Does Islamic banking matter? Research in International Business and Finance, 77 (First Isue) 102876. doi:https://doi.org/10.1016/j.ribaf.2025.102876 [Indexed in SSCI (IF 6.3), Scopus (Cite Score 11.9), ABDC (Rating B), CABS in level 2]

Hidayat-ur-Rehman, Imdadullah; Hossain, M. N.(Corresponding Author), A.B. Bhuiyan, N.Zulkifli (2025)."Towards a Comprehensive Understanding of m-Wallet Adoption: The Significance of User Perceptions and Financial Autonomy", . International Journal of Innovation Science (ESCI, CABS, EI), IF (4.1), Citescore (7), Q1. DOI: 10.1108/IJIS-06-2024-0181.

2024 (164)

R. M. Ziaur, A. K. Azad, M. M. Rahman, "Sensitivity study on convective heat transfer in a driven cavity with star-shaped obstacle and hybrid nanofluid using response surface methodology", Heliyon, Elsevier, Vol. 10(17), Pag. e37440, 2024. https://doi.org/10.1016/j.heliyon.2024.e37440

M. N. Hudha, Md. Jahid Hasan, T. Bairagi, A. K. Azad, M. M. Rahman, "Artificial Neural Network analysis on the effect of mixed convection in triangular-shaped geometry using water-based Al2O3 nanofluids", PloS one (Public Library of Science), Vol. 19(9), Pag. e0304826, 2024. https://doi.org/10.1371/journal.pone.0304826.t006

R. M. Ziaur, A. K. Azad, Md. Nasir Uddin, M. M. Rahman, M. F. Karim"Artificial neural network prediction on free convection in a triangular chamber with a v-shaped corrugated bottom wall filled with nanofluids", Engineering Science and Technology, an International Journal, Elsevier, Vol. 57, Pag. 101824, 2024. https://doi.org/10.1016/j.jestch.2024.101824

M. Rafid, A. K. Azad, S.M. Prottoy, S. Alam, M. Rahman, Md. Jalil Miah, Muhammad Sajjad Hossain, M.M. Rahman, "Augmentation of heat exchanger performance with hybrid nanofluids: Identifying research gaps and future indications - A review", International Communications in Heat and Mass Transfer (ELSEVIER), Vol. 155, June 2024, 107537. https://doi.org/10.1016/j.icheatmasstransfer.2024.107537

Quantification and source apportionment of atmospheric trace gases over Dhaka, Bangladesh, Journal of Atmospheric Chemistry, 1. A.T.M. Mustafa Kamal, Md. Safiqul Islam, Shahid Uz Zaman, Md. Jalil Miah, Tanvir Ahmed, Sirajul Hoque, Abdus Salam, 81, 4 (2024). https://doi.org/10.1007/s10874-024-09457-y

T. Bairagi, Md. Jahid Hasan, M.N. Hudha, A. K. Azad, M.M. Rahman, "Artificial neural network (ANN) analysis on thermophysical properties of magnetohydrodynamics flow with radiation in an arc-shaped enclosure with a rotating cylinder", Heliyon (Elsevier), Vol. 10(7), e28609. https://doi.org/10.1016/j.heliyon.2024.e28609

A. K. Azad, Salma Parvin, Tahiya Hossain, "Performance evaluation of nanofluid-based photovoltaic thermal (PVT) system with regression analysis", Heliyon (Elsevier), Vol. 10, e29252. https://doi.org/10.1016/j.heliyon.2024.e29252

Md Jahid Hasan, A. K. Azad, Rumman Hossain, MM Rahman, MF Karim, "Analysis of mixed convection under radiation and magnetohydrodynamics utilizing Kerosene-CNT nanofluid in a lid-driven cavity", International Journal of Thermofluids, Elsevier publication, Vol. 21, 100528, 2024. https://doi.org/10.1016/j.ijft.2023.100528

Mechanical and Production Engineering

M Maharof, Z Jamaludin, S Mohammad, A Rashid, S Ahmed, L Abdullah, 2024. Super Twisting Sliding Mode Controller For Precise Ball Screw Driven XY Positioning Milling Table. Journal of Advanced Manufacturing Technology (JAMT) 18 (3).

Tasnuva Sharmin, Nazmul Hossain, Fatima Tasneem Mohsin, Md Azazul Haque, Mohammad Muhtasim Mashfy, Tamzeed Ahmed Alvy,Mohammad Nasim, “Advancements in cutting-edge materials for sodium-ion battery anodes: A comprehensive review”, Materials Today Chemistry,Volume 42, December 2024, 102407. Cite Score-8.8, Impact factor- 6.7 SJR rank-Q-1 https://doi.org/10.1016/j.mtchem.2024.102407 https://www.sciencedirect.com/science/article/pii/S2468519424005135?via%3Dihub

MS Hossain, MAI Rahat, MSH Khan, S Shajid, S Salehin, MR Karim, Techno-economic assessment of various concentrating solar power (CSP) technologies for large-scale sustainable power generation in Bangladesh, Energy Conversion and Management, Volume 321, 2024, Ref. 119079, https://doi.org/10.1016/j.enconman.2024.119079 (Impact Factor: 9.9, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

M Kamruzzaman, DK Bhattacharjya, E Alam, MR Karim, B Nath, KS Hattawi, MK Islam, Thermochemical and physical characterization of agricultural biomass for sustainable energy in Bangladesh, Energy Reports, Volume 12, 2024, Pages 5758-5768, https://doi.org/10.1016/j.egyr.2024.11.059 (Impact Factor: 4.7, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

T. Sharmin, N. Hossain, F. T. Mohsin, M. A. Haque, M. M. Mashfy, T. A. Alvy, M. Nasim, Advancements in cutting-edge materials for sodium-ion battery anodes: A comprehensive review, Materials Today Chemistry, 42: 102407 (2024). doi.org/10.1016/j.mtchem.2024.102407

Ahmed, RU, Nabi, I, Alam, CS, Chen, Y, & Rahman, MS. "A Framework for Surface Scanning to Additive Repairing Using Point Cloud Data and Surface Reconstruction Algorithms." Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition. Volume 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging. Portland, Oregon, USA. November 17–21, 2024. V010T13A006. ASME.

Alam, CS, Abid, A, Ahmed, RU, & Rahman, MS. "Fracture Analysis of Additive Friction-Stir Deposited Non-Ferrous and Ferrous Alloys." Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition. Volume 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging. Portland, Oregon, USA. November 17–21, 2024. V010T13A027. ASME.

Abid, A, Sharifi, H, Alam, CS, Ahmed, RU, Sarker, P, Wick, C, & Rahman, MS. "Flexural and Tensile Properties of Cu-Ni-Cr Alloy Processed by Solid-State Additive Manufacturing." Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition. Volume 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging. Portland, Oregon, USA. November 17–21, 2024. V010T13A028. ASME.

Ahmed, RU, Dowell, E, Alam, CS, & Rahman, MS. "Design and Development of a Desktop 3D Printer for Conformal Additive Manufacturing." Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition. Volume 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging. Portland, Oregon, USA. November 17–21, 2024. V010T13A020. ASME.

In-depth Analysis of Motorcycle Accidents in Bangladesh: Understanding Injury Patterns in a Low- to Middle-Income Country, Late-breaking oral only presentation, AAAM’s 68th Annual Scientific Conference, 2024, Seoul, South Korea.

Urmee, S.A. and Hossain, M. (2024), A Quantified Analysis of Lean First Then Automate for a Synergetic Effect. Engineering Reports e13047. Available at: https://doi.org/10.1002/eng2.13047

Foyez Ahmad,Fardin Mahatab,Sajjad Mahmud, Monjurul Ehsan, “Comprehensive Analysis of a Hybrid Solar Assisted Supercritical CO2 Reheat Recompression Brayton Cycle for Enhanced Performance”. International Journal of Thermofluids (2024) 100926 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724003665

RA Hamid, SH Husni, T Ito, S Maidin, M Maharof, 2024. Effect of Filament Pre-Drying on the Microstructure and Porosity of 3D Printed PLA. Journal of Advanced Research in Micro and Nano Engineering 24 (1), 85-94.

Aziz, M., Islam, M.A., Karim, M.R. et al. Effect of triangular pits on the mechanical behavior of 2D MoTe2: a molecular dynamics study. Journal of Molecular Modelling, Vol. 30, Article. 391 (2024). https://doi.org/10.1007/s00894-024-06180-z, (Impact Factor: 2.1, Springer, Q2 Ranked, ISI/Scopus Indexed Journal)

M. Nasim, S. Spadoni, P. G. Pavan, V. Brasco, U. Galvanetto, Helmets with lattice liners can mitigate traumatic brain injury from impacts, Journal of Biomechanics; 176: 112362 (2024). doi.org/10.1016/j.jbiomech.2024.112362

Kasim, M. S., Yusof, S. N. A., Mat Rasul, R., Awang, R., Abd Rahman, Z., Mohamed, S. B., Sahroni, T. R., & Patwari, M. A. U. (2024). Design and Optimization of LPG Safety Cap using Finite Element Method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 191–199. https://doi.org/10.37934/araset.54.2.191199

Hossain, M. Naem, Muhammad Mahmood Hasan, M. Ahsan Habib, Fatin Bin Ferdous, and Sazid Rahman. "Assessing economic viability and environmental impact of solar-powered EV charging station in Gazipur, Bangladesh: A case study." Solar Compass 12 (2024): 100091, CiteScore - 5.7, SJR Rank - Q2.

J. Tasnim, M. Nasim, K.A. Aftab, F. Aktar, M. Hossain, Comparison of motorcycle accident data between low- or middle-income and high-income countries, IRCOBI conference, 2024, Stockholm, Sweden.

Khandaker Nomana, Usman Alib, Yongbo Lib, Shun Wangb, Anayet U. Patwari, Anil Kumard, ‘A novel nonlinear dynamic measure for early detection of bearing fault using weighted squared envelope based symbolic Lempel-Ziv complexity”- IEEE Transactions on Instrumentation and Measurement PP(99):1-1, DOI: 10.1109/TIM.2024.3463030

Rizvi Arefin Rinik, Naimul Islam, M Monjurul Ehsan, Yasin Khan, “Design of Gravity Assisted Heat Exchanger and its Application on Enhanced Waste Heat Recuperation Utilizing Organic Rankine and LNG System” International Journal of Thermofluids (2024) 100822 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724002635

Rizvi Arefin Rinik, Naimul Islam, M Monjurul Ehsan, Yasin Khan, “Design of Gravity Assisted Heat Exchanger and its Application on Enhanced Waste Heat Recuperation Utilizing Organic Rankine and LNG System” International Journal of Thermofluids (2024) 100822 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724002635

M. Shafiqur Rahman, Chowdhury Sadid Alam, M.K.H. Pulok, Congyuan Zeng, Uttam K. Chakravarty, 2024, “An Investigation of Tensile, Fatigue, and Fracture Behavior of 3D-Printed Polymers”, ASME Journal of Engineering Materials and Technology, January 2025, 147(1), p. 011001.

Fairooz Nanzeeba, Tajwar A. Baigh, Afrida Kabir, Yasin Khan, M. Monjurul Ehsan, “Genetic Algorithm-based Optimization of Combined Supercritical CO2 Power and Flash-Tank Enhanced Transcritical CO2 Refrigeration Cycle for Shipboard Waste Heat Recuperation”, Energy Reports, Elsevier (2024) Impact factor-4.7, Cite Score-8.2, SJR rank-Q-2 https://www.sciencedirect.com/science/article/pii/S2352484724004840

Tajwar A. Baigh, Mostofa J. Saif, Ashraf Mustakim, Fairooz Nanzeeba, Yasin Khan, M. Monjurul Ehsan, “Enhancing Thermodynamic Performance with an Advanced Combined Power and Refrigeration cycle with Dual LNG Cold Energy Utilization” Heliyon, CellPress, Elsevier. Impact Factor-4, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2405844024117793

Fairooz Nanzeeba, Tajwar A. Baigh, Afrida Kabir, Yasin Khan, M. Monjurul Ehsan, “Genetic Algorithm-based Optimization of Combined Supercritical CO2 Power and Flash-Tank Enhanced Transcritical CO2 Refrigeration Cycle for Shipboard Waste Heat Recuperation”, Energy Reports, Elsevier (2024) Impact factor-4.7, Cite Score-8.2, SJR rank-Q-2 https://www.sciencedirect.com/science/article/pii/S2352484724004840

Yasin Khan, S M Naqib Ul Islam, M Monjurul Ehsan, “Performance Evaluation of Novel Advanced Recompression Absorption Refrigeration Systems Equipped with Ejector and Vapor Injection Technology”, (2023): 102773. Impact factor-5.1, Cite Score-7.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2451904924003913

Md.N. Mia, M. Abdullah, A. Das, F.T. Mahmood, M.N. Hasan, Mixed convective heat transfer in a square cavity filled with power-law fluids under active flow modulation, Heat Transfer n/a (2024). https://doi.org/https://doi.org/10.1002/htj.23143.

Tajwar A. Baigh, Mostofa J. Saif, Ashraf Mustakim, Fairooz Nanzeeba, Yasin Khan, M. Monjurul Ehsan, “Enhancing Thermodynamic Performance with an Advanced Combined Power and Refrigeration cycle with Dual LNG Cold Energy Utilization” Heliyon, CellPress, Elsevier. Impact Factor-4, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2405844024117793

Anayet U Patwari, Wasib Ul Navid, Rahman Maruf Morshed, Sakib Showkhin, Shah Alam Bhuiyan “Improvement of drilled holes quality by voice-activated ultrasonic vibration assisted drilling process of different orientation” Published under licence by IOP Publishing Journal of Physics: Conference Series, Volume 2762, The International Symposium on Structural Dynamics of Aerospace 09/09/2023 - 10/09/2023 Xi'an, China Citation Anayet U Patwari et al 2024 J. Phys.: Conf. Ser. 2762 012027 DOI 10.1088/1742-6596/2762/1/012027

Shah Alam Bhuiyan, Anayet U Patwari, Wasib Ul Navid, Rahman Maruf Morshed, Sakib Showkhin, “Development of a mathematical model for the prediction of drill quality in voice-activated ultrasonic vibration assisted drilling process” Journal of Physics: Conference Series, Volume 2762, The International Symposium on Structural Dynamics of Aerospace 09/09/2023 - 10/09/2023 Xi'an, China Citation Shah Alam Bhuiyan et al 2024 J. Phys.: Conf. Ser. 2762 012043 DOI 10.1088/1742-6596/2762/1/012043

Nuhash, Mashrur Muntasir; Firoz, Mahmudul; Bhuiyan, Arafat Ahmed; Karim, Md. Rezwanul; Numerical Analysis of Extended Annular Jet Impingement for Sustainable Solar Air Heater (June 9, 2024). Available at SSRN: https://ssrn.com/abstract=4858854 or http://dx.doi.org/10.2139/ssrn.4858854

Yasin Khan, S M Naqib Ul Islam, M Monjurul Ehsan, “Performance Evaluation of Novel Advanced Recompression Absorption Refrigeration Systems Equipped with Ejector and Vapor Injection Technology”, (2023): 102773. Impact factor-5.1, Cite Score-7.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2451904924003913

Imrul Kayes, Raditun E. Ratul, Abyaz Abid, Fawaz Bukht Majmader, Yasin Khan, M Monjurul Ehsan. “Multi-Objective Optimization and 4E (Energy, Exergy, Economy, Environmental Impact) Analysis of a Triple Cascade Refrigeration System”. Heliyon, CellPress, Elsevier. Impact Factor-4, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2405844024076862

Khaled, Md Mainuddin, Tahiya Hossain, Wasib Ul Navid, Md Gias Kamal, M. Monjurul Ehsan, Yasin Khan, and Muhammad Mahmood Hasan. "Thermal analysis and dynamic attributes of a sustainable CSP-fossil hybrid power plant utilizing organic Rankine cycles for enhanced plant performance." International Journal of Thermofluids 22 (2024): 100696. https://doi.org/10.1016/j.ijft.2024.100696, CiteScore - 10.1, SJR Rank - Q1.

F.T. Mahmood, T.S. Chowdhury, M.N. Hasan, Fluid-structure interaction induced mixed convection characteristics in a lid-driven square cavity with non-Newtonian power law fluids, International Jour- nal of Thermofluids 22 (2024) 100687. https://doi.org/https://doi.org/10.1016/j.ijft.2024.100687.

Md Mainuddin Khaled, Tahiya Hossain, Wasib Ul Navid, Md Gias Kamal, M Monjurul Ehsan, Yasin Khan, Muhammad Mahmood Hasan. “Thermal Analysis and Dynamic Attributes of a Sustainable CSP-Fossil Hybrid Power Plant Utilizing Organic Rankine Cycles for Enhanced Plant Performance”. International Journal of Thermofluids (2024) 100696 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724001381

M.S. Nahin, M.S.U. Qaum, A.S. Chowdhury, T.I. Siam, F.T. Mahmood, M.N. Hasan, Mixed con- vection characteristics in a long horizontal lid-driven channel with periodically distributed local flow modulators, Heat Transfer (2024). https://doi.org/https://doi.org/10.1002/htj.23071.

Asif Iqbal Turja, Ishtiak Ahmed Khan, Sabbir Rahman, Ashraf Mustakim, Mohammad Ishraq Hossain, M Monjurul Ehsan, Yasin Khan. “Machine Learning-Based Multi-Objective Optimization and Thermal Assessment of Supercritical CO2 Rankine Cycles for Gas Turbine Waste Heat Recovery” Energy and AI 15 (2024) 100372 Cite Score-11.8, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666546824000387

Rifat Ahamed, Musfequs Salehin, M Monjurul Ehsan, “Thermal-hydraulic performance and flow phenomenon evaluation of a curved trapezoidal corrugated channel with E-shaped baffles implementing hybrid nanofluid” Heliyon, CellPress, Elsevier. Impact Factor-4, SJR rank-Q-1 https://www.cell.com/action/showPdf?pii=S2405-8440%2824%2904729-7

Imrul Kayes, Raditun E. Ratul, Abyaz Abid, Fawaz Bukht Majmader, Yasin Khan, M Monjurul Ehsan. “Multi-Objective Optimization and 4E (Energy, Exergy, Economy, Environmental Impact) Analysis of a Triple Cascade Refrigeration System”. Heliyon, CellPress, Elsevier. Impact Factor-4, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2405844024076862

Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study Journal: Composites Science and Technology, Volume 251, 2024 DOI: https://doi.org/10.1016/j.compscitech.2024.110578 Details: ISSN: 0266-3538

Anayet U Patwari, Arman Hossain, Irteza Maroof, Fahim Mahmud,” An Innovative approach at assess the potentiality of using activated carbon and rice husk ash in primary cells, Malaysian Journal of Composite Science and Manufacturing, Volume 13, Issue 1, March 2024, pp55,66. doi.org: 10.37934/mjcsm.13.1.5567

S M Naqib Ul Islam, Ashraf Mustakim, Rifat Ahamed, Musfequs Salehin, M Monjurul Ehsan, “Advanced Thermo-Hydraulic Assessment of Helical Pipes with Different Shapes of Jackets Using Single-Phase and Hybrid Nanofluids” International Journal of Thermofluids (2024) 100628 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724000703

Yasin Khan, S M Naqib-Ul-Islam, Md Walid Faruque, M Monjurul Ehsan, “Advanced Cascaded Recompression Absorption System Equipped with Ejector and Vapor-Injection Enhanced Vapor Compression Refrigeration System: ANN Based Multi-Objective Optimization” Thermal Science and Engineering Progress (March 2024): 102485. Impact factor-4.56, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S2451904924001033

Md Mainuddin Khaled, Tahiya Hossain, Wasib Ul Navid, Md Gias Kamal, M Monjurul Ehsan, Yasin Khan, Muhammad Mahmood Hasan. “Thermal Analysis and Dynamic Attributes of a Sustainable CSP-Fossil Hybrid Power Plant Utilizing Organic Rankine Cycles for Enhanced Plant Performance”. International Journal of Thermofluids (2024) 100696 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724001381

ASM Redwan Haider, Ahmad Fatehi Ali Mohammed Hezam, Md Akibul Islam, Yeasir Arafat, Mohammad Tanvirul Ferdaous, Sayedus Salehin, Md Rezwanul Karim, Temperature-dependent failure of atomically thin MoTe2, Journal of Molecular Modeling (2024), Vol. 30, Issue 2, Page 86, https://doi.org/10.1007/s00894-024-05883-7, (Impact Factor: 2.1, Springer, Q2 Ranked, Scopus Indexed Journal)

Sifat Abdul Bari, Mohtasim Fuad, Kazi Fahad Labib, M Monjurul Ehsan, Yasin Khan, Muhammad Mahmood Hasan, “Enhancement of thermal power plant performance through solar-assisted feed water heaters: An innovative repowering approach” Energy Conversion and Management: X (2024) 100550 https://doi.org/10.1016/j.ecmx.2024.100550, CiteScore - 8.8, Impact Factor - 7.1, SJR rank - Q1.

Sifat Abdul Bari, Mohtasim Fuad, Kazi Fahad Labib, M Monjurul Ehsan, Yasin Khan, Muhammad Mahmood Hasan, “Enhancement of thermal power plant performance through solar-assisted feed water heaters: An innovative repowering approach” Energy Conversion and Management: X (February, 2024) 100550 Impact Factor-6.3, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S259017452400028X

Sifat Abdul Bari, Mohtasim Fuad, Kazi Fahad Labib, M Monjurul Ehsan, Yasin Khan, Muhammad Mahmood Hasan, “Enhancement of thermal power plant performance through solar-assisted feed water heaters: An innovative repowering approach” Energy Conversion and Management: X (2024) 100550 Impact Factor-6.3, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S259017452400028X

Yasin Khan, S M Naqib-Ul-Islam, Md Walid Faruque, M Monjurul Ehsan, “Advanced Cascaded Recompression Absorption System Equipped with Ejector and Vapor-Injection Enhanced Vapor Compression Refrigeration System: ANN Based Multi-Objective Optimization” Thermal Science and Engineering Progress (2023): 101745. Impact factor-4.56, Cite Score-7.1, SJR rank-Q-1

Radif Uddin Ahmed, Chowdhury Sadid Alam, M Shafiqur Rahman, 2023, “Application of Machine Learning in Process Analysis of the Friction-Stir Welding Technique”, Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition, New Orleans, USA, Oct 29-Nov 2, 2023.

Asif Iqbal Turja, Ishtiak Ahmed Khan, Sabbir Rahman, Ashraf Mustakim, Mohammad Ishraq Hossain, M Monjurul Ehsan, Yasin Khan. “Machine Learning-Based Multi-Objective Optimization and Thermal Assessment of Supercritical CO2 Rankine Cycles for Gas Turbine Waste Heat Recovery” Energy and AI 15 (2024) 100372 Cite Score-11.8, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666546824000387

MM Nuhash, MR Karim, AA Bhuiyan, The impact of tube bundle layout on the thermal and fluidic behaviour of liquid lead–bismuth eutectic in a helical-coiled once-through steam generator, Heliyon (2024), Vol.10, Issue 2, https://doi.org/10.1016/j.heliyon.2024.e24149 (Impact Factor: 3.4, Cell Press, Q1 Ranked, Scopus Indexed Journal)

Asif Iqbal Turja, Khandekar Nazmus Sadat, Md Mahmudul Hasan, Yasin Khan, Md Monjurul Ehsan, “Waste Heat Recuperation in Advanced Supercritical CO2 Power Cycles with Organic Rankine Cycle Integration & Optimization Using Machine Learning Methods” International Journal of Thermofluids (2024) 100612 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724000545

Ashraf Mustakim, SM Naqib Ul Islam, Rifat Ahamed, Musfequs Salehin, M Monjurul Ehsan, “Numerical Assessment of Advanced Thermo-Hydrodynamic Characteristics of Nanofluid inside a Helically Featured Straight Pipe” International Journal of Thermofluids (2024) 100591 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724000338

Iqbal, M., Morshed, S., Iqbal, S. & Rashid, A., Study on Working Conditions of a Selected Garments Factory in Bangladesh during Covid 19 situation, Journal of Mechanical Engineering, ME Division, IEB, pp 18-27, Vol: ME 51, No 1, June 2022.

Asif Iqbal Turja, Md Mahmudul Hasan, M Monjurul Ehsan, Yasin Khan. “Multi-Objective Performance Optimization & Thermodynamic Analysis of Solar Powered Supercritical CO2 Power Cycles Using Machine Learning Methods & Genetic Algorithm” Energy and AI 15 (2024) 100327 Cite Score-11.8, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S266654682300099X

Asif Iqbal Turja, Khandekar Nazmus Sadat, Md Mahmudul Hasan, Yasin Khan, Md Monjurul Ehsan, “Waste Heat Recuperation in Advanced Supercritical CO2 Power Cycles with Organic Rankine Cycle Integration & Optimization Using Machine Learning Methods” International Journal of Thermofluids (2024) Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202724000545

Electrical and Electronic Engineering

S. Islam, A. Zeesan, N. Ahmed and A. Shafiullah, "A Novel Approach for Arrhythmia Detection from Electrocardiogram Signal using cGAN-Markov Chain and Hybrid Recurrent Neural Networks," 2024 27th International Conference on Computer and Information Technology (ICCIT), Cox's Bazar, Bangladesh, 2024, pp. 3659-3664, doi: 10.1109/ICCIT64611.2024.11022586

"Advancing optomechanical sensing: Novel CMOS-compatible plasmonic pressure sensor with Silicon-Insulator-Silicon waveguide configuration", (Optics Communications). DOI: https://doi.org/10.1016/j.optcom.2025.131495

Nafiz I. B. Hamid, Mohammad T. Kawser, M. A. Khan, “Selection of Overlay and Underlay Modes for Vehicular Users in LTE V2X Using Layering in a Cell”, Wireless Personal Communications, vol. 139, no. 1, pp. 679-698, November 2024. DOI: https://doi.org/10.1007/s11277-024-11642-x

Nafiz Imtiaz Bin Hamid, Mohammad T. Kawser, Md Asifuzzaman Khan, “Selection of Overlay and Underlay Modes for Vehicular Users in LTE V2X Using Layering in a Cell” in Wireless Personal Communications, November 2024. DOI: https://doi.org/10.1007/s11277-024-11642-x

M. S. Rahman and M. T. Kawser, "Hybrid PSOCSA-Driven Power Allocation for Capacity and Spectral Efficiency Optimization in Spatially Correlated MIMO Systems," 2024 International Conference on Electrical, Communication and Computer Engineering (ICECCE), Kuala Lumpur, Malaysia, 2024, pp. 1-6, doi: 10.1109/ICECCE63537.2024.10823517.

M. S. Rahman, Mohammad T. Kawser, “Hybrid PSOCSA-Driven Power Allocation for Capacity and Spectral Efficiency Optimization in Spatially Correlated MIMO Systems”, International Conference on Electrical, Communication and Computer Engineering (ICECCE), Kuala Lumpur, Malaysia, October 30-31, 2024. DOI: 10.1109/ICECCE63537.2024.10823517

Nafiz Imtiaz Bin Hamid, Mohammad Rakibul Islam, Md Rezaul Hoque Khan, Khandoker Md Abu Talha, A. N. M. Iftekher, “High Birefringent Slotted Core Slotted Cladding Porous Core PCF for THz Waveguide” in Optics Communications, Volume 574 (2025), 131120. DOI: https://doi.org/10.1016/j.optcom.2024.131120

S. M. Mahbub, A. A. M. Nafiz, A. A. Protiva, M. Tamim, and R. Rahad, “Ultra-short pulse: A comprehensive way of sensing pure solvents through hollow core photonic crystal fiber sensor,” Opt Mater (Amst), vol. 156, p. 116028, 2024, doi: https://doi.org/10.1016/j.optmat.2024.116028.

Asif Newaz, Abdullah Taharat, Md Sakibul Islam, Khairum Islam, A.G.M. Fuad Hasan Akanda, An ML-based decision support system for reliable diagnosis of ovarian cancer by leveraging explainable AI, Informatics in Medicine Unlocked, Volume 49, 2024, 101553, ISSN 2352-9148, https://doi.org/10.1016/j.imu.2024.101553.

"An ML-based decision support system for reliable diagnosis of ovarian cancer by leveraging explainable AI", (Informatics in Medicine Unlocked, Q2, Impact factor: 4.2). DOI: https://doi.org/10.1016/j.imu.2024.101553

M Hasan, A Siddika, N I B Hamid, M S H Khan, “Integrating Variation Theory and Cognitive Theory in Engineering Classrooms: Effect on Student Achievement”, 52nd Annual Conference of the European Society for Engineering Education (SEFI 2024), Lausanne, Switzerland.

M. S. H. Rifat and M. Jahangir Alam, "Exploring the Potential of Lead-Free Perovskite/ Kesterite Double Absorber Structure With Diverse Transport Layer Materials to Enhance Tandem Solar Cell Performance," in IEEE Access, vol. 12, pp. 85115-85133, 2024, doi: 10.1109/ACCESS.2024.3415110.

A. Ali, M. M. Ahmed, A. A. N. Zeesan, H. J. Apon and M. Shadman Abid, “African Vulture Optimization Algorithm for Simultaneous Placement and Sizing of Shunt Capacitors in Radial Distribution System,” 2024 12th International Conference on Smart Grid (icSmartGrid), Setubal, Portugal, 2024, pp. 406-411, doi: 10.1109/icSmartGrid61824.2024.10578123.

A. U. R. Adib, W. B. I. Rashid, M. A. R. Jahin and H. J. Apon, “Hybrid GWOPSO Algorithm Based Load Scheduling Approach for PV Integrated Households,” 2024 12th International Conference on Smart Grid (icSmartGrid), Setubal, Portugal, 2024, pp. 400-405, doi: 10.1109/icSmartGrid61824.2024.10578286.

M. S. Mohosheu, M. A. al Noman, A. Newaz, Al-Amin and T. Jabid, "A Comprehensive Evaluation of Sampling Techniques in Addressing Class Imbalance Across Diverse Datasets," 2024 6th International Conference on Electrical Engineering and Information & Communication Technology (ICEEICT), Dhaka, Bangladesh, 2024, pp. 1008-1013, doi: 10.1109/ICEEICT62016.2024.10534464.

A. Newaz, M. S. Mohosheu, M. A. A. Noman and T. Jabid, "iBRF: Improved Balanced Random Forest Classifier," 2024 35th Conference of Open Innovations Association (FRUCT), Tampere, Finland, 2024, pp. 501-508, doi: 10.23919/FRUCT61870.2024.10516372.

S. M. Mahbub, M. H. M. Shamim and R. H. Sagor, "Gas Detection Utilizing Soliton Effect Pulse Compression in a Hollow Core Photonic Crystal Fiber," 2024 6th International Conference on Electrical Engineering and Information & Communication Technology (ICEEICT), Dhaka, Bangladesh, 2024, pp. 308-312, doi: 10.1109/ICEEICT62016.2024.10534440.

A. Rahnuma, A. Enam, M. A. Billah, M. O. Faruque and S. M. Mahbub, "Design and Analysis of a Novel Triangular Nano-Plasmonic Coupler with an Enhanced Coupling Efficiency," 2024 6th International Conference on Electrical Engineering and Information & Communication Technology (ICEEICT), Dhaka, Bangladesh, 2024, pp. 119-124, doi: 10.1109/ICEEICT62016.2024.10534402.

Abid, Md. S., Apon, H. J., Hossain, S., Ahmed, A., Ahshan, R., & Lipu, M. S. H. (2024). A novel multi-objective optimization based multi-agent deep reinforcement learning approach for Microgrid Resources Planning. Applied Energy, 353, 122029. https://doi.org/10.1016/j.apenergy.2023.122029

Technical and Vocational Education

Al Mamun, M. A., & Lawrie, G. (2024). Cognitive presence in learner–content interaction process: The role of scaffolding in online self-regulated learning environments. Journal of Computers in Education. https://doi.org/10.1007/s40692-023-00279-7

Umar, M., & Hasan, M. (2024). Predicting students’ satisfaction with academic services at a multicultural engineering university in Bangladesh: A multiple regression analysis. PloS one, 19(9), e0309223. https://doi.org/10.1371/journal.pone.0309223

Asag, M. A., Al Mamun, M. A., & Hasan, M. (2024, December 1-4). Engineering Students’ Adoption of Generative AI: The Role of Social Influence and Cognitive Processes. Australasian Society for Computers in Learning in Tertiary Education (ASCILITE) Conference 2024, University of Melbourne, Australia. https://doi.org/10.14742/apubs.2024.1217

Jaiteh, J., Hasan, M., Karim, A., Al Mamun, M. A., & Khan, M. S. H. (2024, December 1-4). Students' perceptions of using artificial intelligence in tertiary education: A phenomenographic study. Australasian Society for Computers in Learning in Tertiary Education (ASCILITE) Conference 2024, University of Melbourne, Australia. https://doi.org/10.14742/apubs.2024.1233

Rufai, A. A., Khan, M. S. H., & Hasan, M. (2024). An exploration of pedagogical approaches in teaching artificial intelligence courses: Experience from undergraduates students of Bangladesh. Social Sciences & Humanities Open, 10, 101075

Jaiteh, J., Hasan, M., Karim, A., Al Mamun, M. A., & Khan, M. S. H. (2024). Students' perceptions of using artificial intelligence in tertiary education: A phenomenographic study. ASCILITE Publications, 506-511. https://doi.org/10.14742/apubs.2024.1233

Asag, M. A., Al Mamun, M. A., & Hasan, M. (2024). Engineering Students’ Adoption of Generative AI: The Role of Social Influence and Cognitive Processes. ASCILITE Publications, 483-489. https://doi.org/10.14742/apubs.2024.1217

Hasan, M. (2024, November 02). Transforming Teacher Development with Artificial Intelligence (AI): A Global Perspective International Conference - Artificial Intelligence and Future Education, Soochow University, Suzhou, China.

Jaiteh, J., Hasan, M., Karim, A., Al Mamun, M. A., & Khan, M. S. H. (2024). Students' perceptions of using artificial intelligence in tertiary education: A phenomenographic study. In T. Cochrane, V. Narayan, E. Bone, C. Deneen, M. Saligari, K. Tregloan, & R. Vanderburg (Eds.), Navigating the Terrain: Emerging frontiers in learning spaces, pedagogies, and technologies. Proceedings ASCILITE 2024 (pp. 506-511)

Hasan, M., Siddika, A., Hamid, N. I. B., & Khan, S. H. (2024). Integrating Variation Theory and Cognitive Theory in Engineering Classrooms: Effect on Student Achievement 52st Annual Conference of the European Society for Engineering Education (SEFI), EPFL in Lausanne, Switzerland. https://dx.doi.org/10.5281/zenodo.14254726

Hasan, M., Siddika, A., Hamid, N., & Khan, M. S. H. (2024). Integrating Variation Theory and Cognitive Theory In Engineering Classrooms: Effect On Student Achievement. Proceedings of the 52nd Annual Conference of SEFI, Lausanne, Switzerland

Rufai, A. A., Hossain Khan, M. S., & Hasan, M. (2024). An exploration of pedagogical approaches in teaching artificial intelligence courses: Experience from undergraduates students of Bangladesh. Social sciences & humanities open, 10, 101075. https://doi.org/https://doi.org/10.1016/j.ssaho.2024.101075

Sadam, N. Y. S., & Al Mamun, M. A. (2024). Polytechnic students’ perceived satisfaction of using technology in the learning process: The context of Bangladesh TVET. Heliyon, 10(16), e35977. https://doi.org/10.1016/j.heliyon.2024.e35977

Shamim, M.R.H, Jeng, M.A., Ash Malick, Raihan M.A. (2024). University teachers’ perceptions of ICT-based teaching to construct knowledge for effective classroom interaction in the context of TPACK model. Heliyon, ELSEVIER, Scopus: Q1.

Hasan, M., Khan, M. S. H., & Ahmed, A. K. M. F. (2024). Application of variation theory in STEM education: A comprehensive guideline for STEM teachers. MethodsX, 12, 102500. https://doi.org/https://doi.org/10.1016/j.mex.2023.102500

Hasan, M., & Nasser, N. M. N. (2024, 9-10 Feb). What Predicts Students' Achievement in an English Language Course: Attendance or Engagement? 2nd TESOL BD International Conference 2024, Dhaka, Bangladesh.

Hasan, M., Lodge, J. M., Karim, A., & Khan, M. S. H. (2024). Exploring Students’ Conceptions of Project-Based Learning: Implications for Improving Engineering Pedagogy. IEEE Transactions on Education.

Badjie, O., Velankar, Y., & Al Mamun, M. A. (2024). Investigating How Students Perceive Assessment in the Context of Engineering Education. Connecting Research-Policy-Practice for Transforming Engineering Education, 100–108. https://doi.org/10.52202/073963-0013

Chowdhury, M. U. R., Mahamud, T., Sarker, M. S., & Al Mamun, M. A. (2024). Towards resilient infrastructure: Assessing steel–concrete composite and RCC structures in Bangladesh. Discover Civil Engineering, 1(1), 1-20. https://doi.org/10.1007/s44290-024-00121-8

Shamim, M. R. H., Jeng, A. M., & Raihan, M. A. (2024). University teachers’ perceptions of ICT-based teaching to construct knowledge for effective classroom interaction in the context of TPACK model. Heliyon, 10(8). https://www.cell.com/heliyon/fulltext/S2405-8440(24)04608-5

Hasan, M., M. S. H. Khan, & Ahmed, A. F. (2024) Application of variation theory in STEM education: A comprehensive guideline for STEM teachers. MethodsX, 12, p. 102500.

Hasan, M., Lodge, J. M., Karim, A., & Khan, M. S. H. (2024). Exploring Students’ Conceptions of Project-Based Learning: Implications for Improving Engineering Pedagogy. IEEE Transactions on Education, 67(2), 234-244. https://doi.org/10.1109/TE.2023.3348523

Computer Science and Engineering

Ajwad Abrar, Farzana Tabassum and Sabbir Ahmed, "Performance Evaluation of Large Language Models in Bangla Consumer Health Query Summarization," 2024 27th International Conference on Computer and Information Technology (ICCIT), Cox's Bazar, Bangladesh, 2024, pp. 2748-2753, doi: 10.1109/ICCIT64611.2024.11022034.

F. -t. -Z. Sananda and S. Ahmed, "Investigating the Impact of Developer Proficiency on Bug-Fixing Efficiency and Accuracy," 2024 8th International Conference on Information Technology (InCIT), Chonburi, Thailand, 2024, pp. 427-432, doi: 10.1109/InCIT63192.2024.10810579.

M. Ahamed, R. B. Kabir, T. T. Dipto, M. Al Mushabbir, S. Ahmed and M. H. Kabir, "Performance Analysis of Few-Shot Learning Approaches for Bangla Handwritten Character and Digit Recognition," in 6th International Conference on Sustainable Technologies for Industry 5.0 (STI), Bangladesh, December 2024, pp. 1-6.

Md Fahim, Fariha Tanjim Shifat, Fabiha Haider, Deeparghya Dutta Barua, MD Sakib Ul Rahman Sourove, Md Farhan Ishmam, and Md Farhad Alam Bhuiyan. 2024. BanglaTLit: A Benchmark Dataset for Back-Transliteration of Romanized Bangla. In Findings of the Association for Computational Linguistics: EMNLP 2024, pages 14656–14672, Miami, Florida, USA. Association for Computational Linguistics.

Tanjila Alam Sathi, Rafsan Jany, Razia Zaman Ela, AKM Azad, Salem Ali Alyami, Md Azam Hossain, Iqram Hussain,“An interpretable electrocardiogram-based model for predicting arrhythmia and ischemia in cardiovascular disease”, Results in Engineering, Volume 24, 2024,103381,ISSN 2590-1230.https://doi.org/10.1016/j.rineng.2024.103381.(Q1)

T. Tajrin and M. H. Kabir, “Underwater Image Enhancement Based on Adaptive Color Balance and Contrast Optimization with Minimum Information Loss,” in International Conference on Machine Intelligence and Emerging Technologies (MIET), November 2024, pp 523–534.

Barua, D.D., Sourove, M.S.U.R., Ishmam, M.F., Haider, F., Shifat, F.T., Fahim, M. and Alam, M.F., 2024. ChitroJera: A Regionally Relevant Visual Question Answering Dataset for Bangla. arXiv preprint arXiv:2410.14991. (https://arxiv.org/2410.14991)

Haider, F., Shifat, F.T., Ishmam, M.F., Barua, D.D., Sourove, M.S.U.R., Fahim, M., & Alam, M.F., 2024. BANTH: A Multi-label Hate Speech Detection Dataset for Transliterated Bangla. arXiv. https://arxiv.org/abs/2410.13281.

Al Imran, A. and Ishmam, M.F., FourierKAN outperforms MLP on Text Classification Head Fine-tuning. In NeurIPS 2024 Workshop on Fine-Tuning in Modern Machine Learning: Principles and Scalability (Accepted).

Mohsinul Kabir, Faria Binte Kader, Nafisa Hossain Nujat, Tasmia Binte Sogir, Fatin Abrar Shams, Hasan Mahmud & Kamrul Hasan, "Unveiling Depression on Social Media: Active Learning with Human-in-the-Loop Labeling for Mental Health Data Annotation and Analysis", In: Rapp, A., Di Caro, L., Meziane, F., Sugumaran, V. (eds) Natural Language Processing and Information Systems. NLDB 2024. Lecture Notes in Computer Science, vol 14762. Springer, Cham. https://doi.org/10.1007/978-3-031-70239-6_6

Saadat, A., Asad, N.I., & Ishmam, M.F., 2024. Contextual Breach: Assessing the Robustness of Transformer-based QA Models. arXiv PrePrint. https://arxiv.org/abs/2409.10997

S. Ivan, T. Ahmed, S. Ahmed and M. H. Kabir, "A Vision-Language Multimodal Framework for Detecting Hate Speech in Memes," 2024 IEEE Canadian Conference on Electrical and Computer Engineering (CCECE), Kingston, ON, Canada, 2024, pp. 464-468, doi: 10.1109/CCECE59415.2024.10667078.

Shifat, F.T., Haider, F., Sourove, M.S.U.R., Barua, D.D., Ishmam, M.F., Fahim, M. and Bhuiyan, F.A., 2024. Penta-nlp at EXIST 2024 Task 1–3: Sexism Identification, Source Intention, Sexism Categorization In Tweets. Working Notes of CLEF. (https://ceur-ws.org/Vol-3740/paper-114.pdf)

Barua, D.D., Sourove, M.S.U.R., Haider, F., Shifat, F.T., Ishmam, M.F., Fahim, M. and Bhuiyan, F.A., 2024. Penta ML at EXIST 2024: Tagging Sexism in Online Multimodal Content With Attention-enhanced Modal Context. Working Notes of CLEF. (https://ceur-ws.org/Vol-3740/paper-90.pdf)

Alam, S., Ishmam, M.F., Alvee, N.H., Siddique, M.S., Hossain, M.A. & Kamal, A.R.M., 2024. BnSentMix: A Diverse Bengali-English Code-Mixed Dataset for Sentiment Analysis. arXiv PrePrint. https://arxiv.org/abs/2408.08964

T. Ahmed, M. B. Hasan, S. Ahmed and M. H. Kabir, "ExE-Net: Explainable Ensemble Network for Potato Leaf Disease Classification," in IEEE Canadian Conference on Electrical and Computer Engineering (CCECE), Canada, August 2024, pp. 335-339.

S. Ivan, T. Ahmed, S. Ahmed and M. H. Kabir, "A Vision-Language Multimodal Framework for Detecting Hate Speech in Memes," in IEEE Canadian Conference on Electrical and Computer Engineering (CCECE), August 2024, pp 464-468.

Unveiling Depression on Social Media: Active Learning with Human-in-the-Loop Labeling for Mental Health Data Annotation and Analysis. NLDB 2024, June 25-26-27, 2024, in Turin, Italy (Accepeted)

Kushol, Rafsanjany, Sanjay Kalra, and Yee-Hong Yang. "DeepDSMRI: Deep Domain Shift Analyzer for MRI." In Annual Conference on Medical Image Understanding and Analysis, pp. 81-95. Cham: Springer Nature Switzerland, 2024.

Ishmam, M.F., Tashdeed, I., Saadat, T.A., Ashmafee, M.H., Kamal, D.A.R.M. and Hossain, D.M.A., 2024. Visual Robustness Benchmark for Visual Question Answering (VQA). (https://arxiv.org/abs/2407.03386)

Md Golam Rasul et al. "Future prediction for nurse care activities using deep learning based multi-label classification". Human Activity and Behavior Analysis, pp. 377-387. 2024

Mohammad Sabik Irbaz et al. "Predicting user-specific future activities using LSTM-based multi-label classification. "Human Activity and Behavior Analysis, pp. 301-310. 2024

F Hussain , MA Khan, M Moniruzzaman, MM Alam, MS. Hossen Efficient Power Control and Resource Allocation for LTE-D2D Communication: A Multi-Objective Optimization Approach. IEEE Access.

F. Hussain, M. A. M. Khan, M. Moniruzzaman, M. M. Alam and M. S. Hossen, "Efficient Power Control and Resource Allocation for LTE-D2D Communication: A Multi-Objective Optimization Approach," in IEEE Access, vol. 12, pp. 61467-61483, 2024, doi: 10.1109/ACCESS.2024.3394249.

Z. Sultana, M. N. Islam and M. H. Kabir, "A Hybrid Deep Learning Framework for Estimating Human 3D Pose from 2D Joint Positions," in International Conference on Advances in Computing, Communication, Electrical, and Smart Systems (iCACCESS), March 2024, pp. 1–6.

Maksuda Islam et al. "The Integrity of Source Code Commenting: Benchmark Dataset and Empirical Analysis". International Journal of Computer Vision & Signal Processing, 14(1), pp 78-88, 2024.

Md. Farhan Ishmam, Md. Sakib Hossain Shovon, M.F. Mridha, Nilanjan Dey, From image to language: A critical analysis of Visual Question Answering (VQA) approaches, challenges, and opportunities, Information Fusion, 2024, 102270, ISSN 1566-2535, https://doi.org/10.1016/j.inffus.2024.102270. (https://www.sciencedirect.com/science/article/pii/S1566253524000484)

R. S. M. Wahidur, I. Tashdeed, M. Kaur and H. -N. Lee, "Enhancing Zero-Shot Crypto Sentiment With Fine-Tuned Language Model and Prompt Engineering," in IEEE Access, vol. 12, pp. 10146-10159, 2024, doi: 10.1109/ACCESS.2024.3350638.

Ahmed, T., Ivan, S., Munir, A., & Ahmed, S. (2024). Decoding depression: Analyzing social network insights for depression severity assessment with transformers and explainable AI. Natural Language Processing Journal, 7, 100079.

Civil & Environmental Engineering

Basunia, A., Alam, M. A. M., Bhuiyan, M. R. H., & Badhon, F.A. (2024). Transportation Mobility During COVID-19: A Systematic Review and Bibliometric Analysis. Digital Transportation and Safety. 10.48130/dts-0024-0015

Funded Project on "Exploring women’s emotional and behavioral adaptability in public transportation through the application of computer vision"

Rifaat, S. M. Chowdhury, T.,Tay, R. and Amin, M. (2024). An Exploratory Study on Ready Made Garment Workers’ Road Safety Risk Perception. AIP Conf. Proc. 3245, 030002 (2024) https://doi.org/10.1063/5.0231962. Proceedings of the 1 st International Conference on Innovations in Engineering, Science and Technology for Sustainable Development, The Maldives National University, Male’, Maldives.

Rahman, M. D., Abrar, M. and Rifaat, S. M. (2024). Linear regression coupled Wasserstein generative adversarial network for direct demand modeling of ride-hailing trips in Chicago and Austin. Transportation Letters. https://doi.org/10.1080/19427867.2024.2372944. (SCOPUS-Q2 and Web of Science Indexed Journal)

Rahman, M.H., Rifaat, S. M., Sadeek, S. N.,Abrar, M., Wang, D. (2024).Gated Ensemble of Spatio-temporal Mixture of Experts for Multi-task Learning in Ride-hailing System. Paper presented in 103rd Annual Meeting of the Transportation Research Board (TRB)At: Washington, D.C., January 7-11, 2024.

Rashid, T., Banna, H.A., Wazkuruni, M., Ahmed, A. and Rifaat, S. M.(2024). Passengers’ perception of Waterway Safety: A Bayesian Belief Network Approach in the Dhaka-Barishal Route. Proceedings of the 7th International Conference on Civil Engineering for Sustainable Development (ICCESD 2024), 7~9 February 2024, KUET, Khulna, Bangladesh

Basunia, A. , T. H. Anchal, T. H., , Mahzabeen, T. Z. , Ahmed, N., Rifaat, S. M.(2023). A Study on the Road Crossing Behavior of High School & College Students in Dhaka City. Proceedings of International Conference on Planning, Architecture and Civil Engineering, 12-14 October, 2023, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh.

Hossain, M., Rahman, P. M. T. Yousuf, T., Ahmed, N., Rifaat, S.M.(2023). Safety Perception of Pedestrians at Level Crossings in Bangladesh. Proceedings of International Conference on Planning, Architecture and Civil Engineering, 12-14 October, 2023, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh.

Rashid. T., Banna, H. A., Wazkuruni, M., Ahmed, N., Rifaat, S. M. (2023). Assessment of Perceived Service Quality of Launch Services in Dhaka-Barishal Route. Proceedings of International Conference on Planning, Architecture and Civil Engineering, 12-14 October, 2023, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh.

Rashid, S. M. R., Hossain, I., Tabbassum, A., Ahmed, N. and Rifaat, S. M. (2023). Analysis of Jaywalking Behavior among University Students of Bangladesh. Proceedings of International Conference on Planning, Architecture and Civil Engineering, 12-14 October, 2023, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh.

Mahmud, N., Ibrahim, K. B. M., Anik, M. A. H., Sheonty, S. R., & Habib, M. A. (2024). Examining Travel Mode Preference for the COVID-19 Post-Vaccination Period: Insights from Dhaka, Bangladesh. Case Studies on Transport Policy, 16, 101208.

Sushil K Das, Amimul Ahsan, Md Habibur Rahman Bejoy Khan, Abdullah Gokhan Yilmaz, Shakil Ahmed, Monzur Imteaz, Muhammad Atiq Ur Rehman Tariq, Md Shafiquzzaman, Anne WM Ng, Nadhir Al-Ansari (2024). Calibration, validation and uncertainty analysis of a SWAT water quality model. Appl Water Sci 14, 86 (2024). https://doi.org/10.1007/s13201-024-02138-x

Umama, M. A., Zahid, C. Z. B., Sarder, N., Joy, J. A., & Ifty, I. I. (2024). Temperature and humidity effects on salt crystallization in burnt clay bricks. Results in Materials, 100541. DOI: https://doi.org/10.1016/j.rinma.2024.100541

More LATEST publications can be found here – www.scopus.com/authid/detail.url?authorId=36008141300 - http://scholar.google.com.my/citations?user=Key57iYAAAAJ&hl=en - http://orcid.org/0000-0002-0015-6123

Business and Technology Management

Mim, A. I., & Azad, M. A. K. (2025). Communication Technology and Innovation: Trends, Opportunities, and Challenges. Impact of Digitalization on Communication Dynamics, 59-76. http://doi:10.4018/979-8-3693-3579-6.ch003

M. K. Amzad Chy, A. K. Muhammad Masum, M. S. Alam, M. A. K. Azad, M. M. Hassan and T. Bhuiyan, "Deep Learning-Based Stock Price Prediction: A Comprehensive Approach Using Bi-LSTM," 2024 4th International Conference on Ubiquitous Computing and Intelli- gent Information Systems (ICUIS), Gobichettipalayam, India, 2024, pp. 805-810, IEEE, doi: 10.1109/ICUIS64676.2024.10866126.

Zhang H., Hossain M.N., Kong Z., Kumar N (2024)."Understanding the Success Factors of MOOCs' Retention Intention: A Necessary Condition Analysis". Journal of PLOS ONE, San Francisco, California, US. SSCI (Q1).

Mohiuddin, K., Wang, X., Shorm, M. E.Jafar, M,G.R. Uddin, M. S. X.(2024).”A Bibliometric analysis: Mapping the evolution of maritime supply chain research trends across academic tides”. Operations and Supply Chain Management 17(2). https://doi.org/10.31387/oscm0570421.[Web of Science/ESCI/Scopus,Q2, IF-2.4, ABDCC]

Mohiuddin, K., Ahmed, S., Uddin, M. S. (Corresponding Author) Mi, J.,Wang, X.(2024). ”Emissions estimation of offshore fishing vessel: Evidence from real-time voyage data”. Environment, Development and Sustainability. https://doi.org/10.1007/s10668-024-04967-x.[Web of Science/SSCI/Scopus,Q1, IF-4.9]

Antunes, J., Wanke, P., Azad, M. A. K., Tan, Y., Faria, J. R., & Mamede, A. (2024). Estimating Japanese bank performance: Stochastic entropic analysis on the basis of ideal solutions. Expert Systems with Applications, 242, 122762. https://doi.org/10.1016/j.eswa.2023.122762 [Indexed in SSCI (IF 8.665), Scopus (Cite Score 12.2), ABDC (Rating C), CABS in level 1]

NERPS Conference 2024 in Japan.

Azad, M. A. K., Ifti, M. H., Novera, C. N., Huynh, A. N. Q., & Döngül, E. S. (2024). Promoting Pro-Environmental Behavior in Policymaking: A Text-Mining Approach for Literature Review. Evaluation Review, 48(2), 370-398. https://doi.org/10.1177/0193841X231176869 [Indexed in SSCI (IF 0.9), Scopus (Cite Score 1.6), ABDC (Rating B), CABS in level 3]

Hidayat-ur-Rehman, Imdadullah, Hossain,M.N (2024). The Impacts of Fintech Adoption, Green Finance and Competitiveness on Banks’ Sustainable Performance: Digital Transformation as Moderator. Asia-Pacific Journal of Business Administration. Emerald publishing limited. ESCI, Scopus (Q2). DOI: 10.1108/APJBA-10-2023-0497.

Tahmid, T., Shafiq, S. B., Yousuf, M., & Azad, M. A. K. (2024, February). Are women gold-dust for Asian banks? Examining the impact of gender diversity on Asian banks' performance and risk. Paper presented at the 10th Annual Conference of Economic Forum of Entrepreneurship & International Business

Shafiq, S. B., Tahmid, T., Yousuf, M., & Azad, M. A. K. (2024). Is the sky bluer than before? Examining firm stability in Europe. International Journal of Markets and Business Systems, 5(1), 26-42.

2023 (270)

1. Abdullah Al Rakib, Md. Jalil Miah, Md. Shahabuddin, Removal of Methylene Blue dye by Fish Scale Activated Carbon (AC) from Aqueous Solution, International Conference on the Role of Science and Technology towards 4IR, Faculty of Science, University of Rajshahi, Bangladesh, Presentation No: ID314 (Oral), 2023, October, 5 – 6.

3. Most. Khadiza Khatun, Md Rehan Alam, Md Jalil Miah, Md. Shahabuddin, Ummey Rayhan, Removal of Toxic Congo Red (CR) Dye by Sugarcane Bagasse Nanocellulose-TiO2 Nanoparticles Composite from Aqueous Solution, International Conference on Sustainable Engineering Development (ICSED-2023), DUET, Gazipur, Bangladesh, Presentation No: Chem. Eng. 17 (14 June, Oral), 2023, June, 13-14.

2. Abdullah Al Rakib, Md. Jalil Miah, Md. Zubayer Hasan, Md. Shahabuddin, Removal of Toxic Methylene Blue from Aqueous Solution by Using High Performance Fish Scale Activated Carbon, International Conference on Sustainable Engineering Development (ICSED-2023), DUET, Gazipur, Bangladesh, Presentation No: Chem. Eng. 02 (14 June, Oral). 2023, June, 13 – 14.

F Sharmin, and M A Basith, “Exploring the differences between sillenite and perovskite phases of bismuth ferrite nanostructures”, presented (oral) at the 1st International Dhaka Science Conference for Women (IWC 2023), Dhaka, Bangladesh, 15-16 February 2023

4. Md Jalil Miah, Md. Shahabuddin, Ken-ichi Iimura; Characterization of the Films of Oxa[9]helicene Derivatives and their Photoelectrochemical Properties, 1st International Conference on Nano-bio and Advanced Materials Engineering (NAME 2023), Cox’s Bazar, Bangladesh. Presentation No: NEN-O-03 (Oral), 2023, January, 7-8.

Tahia Hossain, Raita Rahman, A. K. Azad, M. M. Uddin, “Predicting Death from Heart Disease: A Comparative Analysis of Machine Learning Algorithms”, 26th International Conference on Computer and Information Technology (ICCIT) [IEEE Conference ID: 60459], 21, 13 – 15 December 2023, Cox's bazar, Bangladesh

Mechanical and Production Engineering

A. Rashid, T.H. Nakib, T. Shahriar, M. A. Habib, and M. Hasanuzzaman, Energy and Economic Analysis of an Ocean Thermal Energy Conversion Plant for Bangladesh: A Case Study, Ocean Engineering, Vol. 293, Art. 116625 (2024) .

M. Alam, I. Kayes, A. Hasan, T. Shahriar, and M. A. Habib, Exploring SAARC’s Ocean Energy Potential: Current Status and Future Policies, Energy Reports, Vol. 11, pp. 754–778 (2024) .

Jamaludin, A Sudianto, N Mat Seman, A Othman, M Maharof, SH Yahaya, AU Patwari, 2023. Performance Analysis of a CAD/CAM-MATLAB/Simulink Interpreter in Milling Machine Application. Journal of Advanced Manufacturing Technology, 17(3).

AF Azmin, S Shamsuddin, SH Kamat, MM Ali, M Maharof, H Yussof, 2023. Evaluating Kansei Emotion Responses in Human-Robot Interaction With Low-Cost Robots in Educational Setting. Journal of Advanced Manufacturing Technology, 17(3).

Asif Iqbal Turja, Md Mahmudul Hasan, M Monjurul Ehsan, Yasin Khan. “Multi-Objective Performance Optimization & Thermodynamic Analysis of Solar Powered Supercritical CO2 Power Cycles Using Machine Learning Methods & Genetic Algorithm” Energy and AI 15 (2024) 100327 Cite Score-11.8, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S266654682300099X

Masud Rana, Mashrur Muntasir Nuhash, Arafat A. Bhuiyan, A CFD modelling for optimizing geometry parameters for improved performance using clean energy geothermal ground-to-air tunnel heat exchangers, Case Studies in Thermal Engineering, Article Number:103867 (2023). Quartile: Q1, Impact Factor: 6.8

Salim Sadman Bishal, Ahmed Imtiaz Anando, Dewan Fahim Faysal, M. Monjurul Ehsan. “Performance Evaluation of a Novel Multigeneration Plant of Cooling, Power, and Seawater Desalination Using Supercritical CO2 Partial Cooling, ME-TVC Desalination, and Absorption Refrigeration Cycles” Energy Conversion and Management: X 20 (2023) 100485 Impact factor-6.3, Cite Score-5.9, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174523001411

Md Ashiqur Rahman, Md Rezwanul Karim, M Monjurul Ehsan. “Solar energy harvesting from evacuated flat plate collector: Design, thermo-economic analysis, and off design performance”, Results in Engineering, Volume 20 (2023): 101461, https://www.sciencedirect.com/science/article/pii/S2590123023005881 (Impact Factor: 5.0, Elsevier, Q1 Ranked, Scopus Indexed Journal)

Abyaz Abid, A. K. Azad and Arafat A. Bhuiyan, Optimizing radiation performance of plasma based hybrid bioconvective nanofluids integrated Magneto-hydrodynamic (MHD) micropump for tertiary level radiative oncology, Scientific Reports, vol 13, Article number: 18452 (2023) Quartile: Q1, Impact Factor: 4.22,

Shah Alam, Anayet U Patwari [2023] “Effect of Vibration on Mechanical Properties in Sand Casting Process Using Organic” Journal of Advanced Research in Applied mechanics, volume 111, Issue 1, (1-8).

M. H. Nabil, Y. Khan, M. W. Faruque, and M. M. Ehsan, “Thermo-Economic Assessment of Advanced Triple Cascade Refrigeration System Incorporating a Flash Tank and Suction Line Heat Exchanger,” Energy Convers Manag, vol. 295, p. 117630, Nov. 2023, doi: 10.1016/j.enconman.2023.117630.

Mahdi Hafiz Nabil, Yasin Khan, Md Walid Faruque, M Monjurul Ehsan. “Thermo-Economic Assessment of Advanced Triple Cascade Refrigeration System Incorporating a Flash Tank and Suction Line Heat Exchanger”, Energy Conversion and Management 295 (2023): 117630. Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S0196890423009767

MA Rahman, RRM Salahuddin, S Salehin, MR Karim, Techno-economic and environmental feasibility analysis of solar industrial process heating systems in textile industries of Bangladesh, International Journal of Thermofluids, Volume 20 (2023), 100459, https://doi.org/10.1016/j.ijft.2023.100459 (Cite Score: 9.2, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Asif Iqbal Turja, Khandekar Nazmus Sadat, Yasin Khan, M Monjurul Ehsan. “Cascading the Transcritical CO2 and Organic Rankine Cycles with Supercritical CO2 Cycles for Waste Heat Recovery”, International Journal of Thermofluids (2023) 100508. Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723002239

Asif Iqbal Turja, Khandekar Nazmus Sadat, Yasin Khan, M Monjurul Ehsan. “Cascading the Transcritical CO2 and Organic Rankine Cycles with Supercritical CO2 Cycles for Waste Heat Recovery”, International Journal of Thermofluids (2023) 100508. Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723002239

Shah Alam, Anayet U Patwari [2023] “Effect of Vibration on Mechanical Properties in Sand Casting Process Using Organic” Journal of Advanced Research in Applied mechanics, volume 111, Issue 1, (1-8).

Anayet U Patwari, Wasib Ul Navid, Rahman Maruf Morshed, Sakib Showkhin, Shah Alam Bhuiyan “Improvement of drilled holes quality by voice-activated ultrasonic vibration assisted drilling process of different orientation” 1st international conference on Aerospace Structural dynamics (ICASD) held on Sep 15 to September 17 in Xi’an, China

Shah Alam Bhuiyan, Anayet U Patwari, Wasib Ul Navid, Rahman Maruf Morshed, Sakib Showkhin, “Development of a mathematical model for the prediction of drill quality in voice-activated ultrasonic vibration assisted drilling process” 1st international conference on Aerospace Structural dynamics (ICASD) held on Sep 15 to September 17 in Xi’an, China

Md Ashiqur Rahman, Md Rezwanul Karim, M Monjurul Ehsan. “Solar energy harvesting from evacuated flat plate collector: Design, thermo-economic analysis, and off design performance”, Results in Engineering 20 (2023): 101461. Cite Score-4.5, Impact factor-5, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590123023005881

Baigh, T. A., Nanzeeba, F., Hamim, H. R., & Habib, M. A. (2023). A comprehensive study on the effect of hybridization and stacking sequence in fabricating cotton-blended jute and pineapple leaf fibre biocomposites. In Heliyon (Vol. 9, Issue 9, p. e19792). Elsevier BV. https://doi.org/10.1016/j.heliyon.2023.e19792

Mahdi Hafiz Nabil, Yasin Khan, Md Walid Faruque, M Monjurul Ehsan. “Thermo-Economic Assessment of Advanced Triple Cascade Refrigeration System Incorporating a Flash Tank and Suction Line Heat Exchanger”, Energy Conversion and Management 295 (2023): 117630. Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S0196890423009767

Foyez Ahmad, Sajjad Mahmud, M Monjurul Ehsan, Musfequs Salehin. “Numerical Assessment of Nanofluids in Corrugated Minichannels: Flow Phenomenon and Advanced Thermo-Hydrodynamic Analysis”. International Journal of Thermofluids 20 (2023) 100426 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723001647

Yasin Khan, Md Walid Faruque, Mahdi Hafiz Nabil, M Monjurul Ehsan. “Ejector and Vapor Injection Enhanced Novel Compression-Absorption Cascade Refrigeration Systems: A Thermodynamic Parametric and Refrigerant Analysis”, Energy Conversion and Management 289 (2023): 117190. Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S0196890423005368

Y. Khan, M. W. Faruque, M. H. Nabil, and M. M. Ehsan, “Ejector and Vapor Injection Enhanced Novel Compression-Absorption Cascade Refrigeration Systems: A Thermodynamic Parametric and Refrigerant Analysis,” Energy Convers Manag, vol. 289, p. 117190, Aug. 2023, doi: 10.1016/j.enconman.2023.117190.

Mashrur Muntasir Nuhash, Md Ibthisum Alam, Ananta Zihad, Md Jahid Hasan, Fei Duan, Arafat A. Bhuiyan, Md.Rezwanul Karim, Enhancing energy harvesting performance of a flat plate solar collector through integrated carbon-based and metal-based nanofluids, International Journal of Thermofluids, In Press, Journal Pre-proof, 101276, 2023. Quartile: Q1, Impact Factor: 5.0, DOI: https://doi.org/10.1016/j.rineng.2023.101276

Mitin Mubarrat, Mohammad Muhtasim Mashfy, Talat Farhan, M Monjurul Ehsan, “Research Advancement and Potential Prospects of Thermal Energy Storage in Concentrated Solar Power Application”, International Journal of Thermofluids (2023): 100431.Volume 20. Cite Score-9.2, SJR rank-Q-1 https://doi.org/10.1016/j.ijft.2023.100431 https://www.sciencedirect.com/science/article/pii/S2666202723001477

Shoaib Hasan, Minhazul Alam, Afsana Akter, Imtiaz Uddin, Mainuddin Khaled and Hamidur Rahman, “Biogas production from cafeteria waste by anaerobic digestion” BIO Web Conf., Volume 62, 03001, pg-9, 2023, https://doi.org/10.1051/bioconf/20236203001

Mainuddin Khaled, Gias Kamal, Kawsar Ahmed Porosh, Mohammad Muhtasim Mashfy and Hamidur Rahman, “Experimental approach of producing biogas from fallen leaves with co-digestion” BIO Web Conf., Volume 62, 03003, pg-8, 2023, https://doi.org/10.1051/bioconf/20236203003

S. A. Urmee, & M. M. Hossain, “Lean Manufacturing is a Prerequisite for Automation, A Quantified Study”, 1st IUT International Conference on Mechanical, Materials and Production Engineering (IUT-ICMMPE), Gazipur, Dhaka, July 21-22, 2023.

Anayet U Patwari, Arman Hossain, Irteza Maroof, Fahim Mahmud, ”An Innovative approach at assess the potentiality of using activated carbon and rice husk ash in primary cells, paper ID 203, International conference on Mechanical, Materials and Production Engineering (ICMMPE), Dhaka, Bangladesh, 21-22 July 2023

Z. Jamaludin, A. Sudianto, N. Mat Seman, A. Othman,. M. Maharof, L. Abdullaah, A U Patwari, ”Tracking performance Analysis of a CAM-Matlab/Simulink interpreter for milling machine application, paper ID 145, International conference on Mechanical, Materials and Production Engineering (ICMMPE), Dhaka, Bangladesh, 21-22 July 2023

Mitin Mubarrat, Mohammad Muhtasim Mashfy, Talat Farhan, M Monjurul Ehsan. “Research Advancement and Potential Prospects of Thermal Energy Storage in Concentrated Solar Power Application”. International Journal of Thermofluids 20 (2023) 100426 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723001477

Shoaib Hasan, Minhazul Alam, Afsana Akter, Imtiaz Uddin, Mainuddin Khaled and Hamidur Rahman, “Biogas production from cafeteria waste by anaerobic digestion” presented 2023 5th International Conference on Environment, Resources and Energy Engineering, June 15-17, 2023 | Bangkok, Thailand.

Md. Ibthisum Alam, Mashrur Muntasir Nuhash, Ananta Zihad, Taher Hasan Nakib, M Monjurul Ehsan, “Conventional and Emerging CSP Technologies and Design Modifications: Research Status and Recent Advancements”, International Journal of Thermofluids (2023): 100406. Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723001234

Ahmed Imtiaz Anando, M Monjurul Ehsan, Md. Rezwanul Karim, Arafat A Bhuiyan, Md. Ahiduzzaman, Azharul Karim, “Thermochemical Pretreatments to Improve the Fuel Properties of Rice Husk: A Review”, Renewable Energy, (2023):118917. Impact factor-8.63, Cite Score-16.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S0960148123008236

Yasin Khan, Md Walid Faruque, Mahdi Hafiz Nabil, M Monjurul Ehsan. “Ejector and Vapor Injection Enhanced Novel Compression-Absorption Cascade Refrigeration Systems: A Thermodynamic Parametric and Refrigerant Analysis”, Energy Conversion and Management 289 (2023): 117190. Impact factor-11.53, Cite Score-19.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S0196890423005368

Hasan, Muhammad Mahmood, Md Ehsanul Haque, Mohammad Tosif Nur Zahin, M. M. Islam, Mohammad Ahsan Habib, and M. Hasanuzzaman. "A Comparative Analysis of Energy Consumption and GHG Emission by the Private Vehicles of Different Fuel Types in Dhaka, Bangladesh." Energy Nexus (2023): 100222. https://doi.org/10.1016/j.nexus.2023.100222, CiteScore - 7.7, Impact Factor - 8, SJR rank - Q1.

MM Nuhash, MI Alam, A Zihad, MJ Hasan, F Duan, AA Bhuiyan, MR Karim, Enhancing energy harvesting performance of a flat plate solar collector through integrated carbon-based and metal-based nanofluids, Results in Engineering, Vol. 19 (2023) 101276, https://doi.org/10.1016/j.rineng.2023.101276 (Impact Factor: 5.0, Elsevier, Q1 Ranked, Scopus Indexed Journal)

AI Anando, MM Ehsan, MR Karim, AA Bhuiyan, M Ahiduzzaman, A Karim, Thermochemical pretreatments to improve the fuel properties of rice husk: A review, Renewable Energy, Volume 215, 2023, 118917, https://doi.org/10.1016/j.renene.2023.118917 (Impact Factor: 8.7, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Mainuddin Khaled, Gias Kamal, Kawsar Ahmed Porosh, Mohammad Muhtasim Mashfy and Hamidur Rahman, “Experimental approach of producing biogas from fallen leaves with co-digestion” BIO Web Conf., Volume 62, 03003, pg-8, 2023, https://doi.org/10.1051/bioconf/20236203003

Md. Jahid Hasan, Arafat A. Bhuiyan, Thermo-hydrodynamic characteristics and entropy generation in a tube heat exchanger using multiple head ribbed geometries, South African Journal of Chemical Engineering, In Press, Journal Pre-proof, 2023. Quartile: Q1, Cite Score: 6.9, DOI: https://doi.org/10.1016/j.sajce.2023.06.009

Abrar Sobhan Chowdhury, M Monjurul Ehsan. “A Critical Overview of Working Fluids in Organic Rankine, Supercritical Rankine, and Supercritical Brayton Cycles Under Various Heat Grade Sources”. International Journal of Thermofluids 20 (2023) 100426 Cite Score-9.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723001428

AI Anando, MM Ehsan, MR Karim, Arafat A. Bhuiyan, M Ahiduzzaman, A Karim, Thermochemical pretreatments to improve the fuel properties of rice husk: A review, Journal of Renewable Energy, Vol. 215, 118917, 2023. Quartile: Q1, Impact Factor: 8.7, DOI: https://doi.org/10.1016/j.renene.2023.118917

Enhancement of viscoelastic property of MABS processed by melt compounding and injection molding Journal: Journal of Applied Polymer Science, Volume 140, Issue 2, 2023 DOI: https://doi.org/10.1002/app.53309

F Hossain, MJ Hasan, MZ Sarkar, MR Karim, AA Bhuiyan, Prediction of carbon capture and sequestration (CCS) technology in a 125 MW tangentially coal-fired subcritical thermal power plant for retrofitting in Bangladesh, Results in Engineering, Vol. 18 (2023) 101159, https://doi.org/10.1016/j.rineng.2023.101159 (Impact Factor: 5.0, Elsevier, Q1 Ranked, Scopus Indexed Journal)

Enhancing vibration damping properties of MABS/VDT blends using SEBS-g-MAH as a compatibilizer Journal: Journal of Polymer Research, Volume 30, Issue 12, 2023 DOI: https://doi.org/10.1007/s10965-023-03819-y Details: ISSN: 1022-9760

Raditun E. Ratul, Farid Ahmed, Syed Alam, Md. Rezwanul Karim, Arafat A. Bhuiyan, Numerical study of turbulent flow and heat transfer in a novel design of serpentine channel coupled with D-shaped jaggedness using hybrid nanofluid, Alexandria Engineering Journal, Volume 68, Pages 647-663, 1 April 2023. Q1, Impact Factor: 6.626, DOI: https://doi.org/10.1016/j.aej.2023.01.061

RE Ratul, F Ahmed, S Alam, MR Karim, AA Bhuiyan, Numerical study of turbulent flow and heat transfer in a novel design of serpentine channel coupled with D-shaped jaggedness using hybrid nanofluid, Alexandria Engineering Journal (2023), Vol. 68, pp. 647-663. https://doi.org/10.1016/j.aej.2023.01.061 (Impact Factor: 6.8, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Mainuddin Khaled, Gias Kamal, Kawsar Ahmed Porosh, Mohammad Muhtasim Mashfy and Hamidur Rahman, “Experimental approach of producing biogas from fallen leaves with co-digestion” presented 2023 5th International Conference on Environment, Resources and Energy Engineering, June 15-17, 2023 | Bangkok, Thailand.

Noman K, Li Y, Wen G, Patwari AU, Wang S. Continuous monitoring of rolling element bearing health by nonlinear weighted squared envelope-based fuzzy entropy. Structural Health Monitoring. 2023;. doi:10.1177/14759217231163090

Nasimul Ehsan Chowdhury, Md. Faysal Hossain, Md. Mashud Karim, M. Rafiqul Islam, Arafat A. Bhuiyan, Numerical Investigation for Mitigation of Cavitation in High-Speed Marine Propeller Using Mass Injection Approach, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, March, 2023. Q2, IF: DOI: 10.1007/s40997-023-00636-y

M. W. Faruque, Y. Khan, M. H. Nabil, and M. M. Ehsan, “Parametric analysis and optimization of a novel cascade compression-absorption refrigeration system integrated with a flash tank and a reheater,” Results in Engineering, vol. 17, 2023, doi: 10.1016/j.rineng.2023.101008.

Tasnuva Sharmin, Nazia Rodoshi Khan, Md. Saleh Akram, M Monjurul Ehsan. “A State-of-the-art Review on for Geothermal Energy Extraction, Utilization, and Improvement Strategies: Conventional, Hybridized, and Enhanced Geothermal Systems”. International Journal of Thermofluids (2023): Cite Score-6.6, SJR rank-Q-1

Md Walid Faruque, Yasin Khan, Mahdi Hafiz Nabil, M Monjurul Ehsan. “Parametric Analysis and Optimization of a Novel Cascade Compression-Absorption Refrigeration System Integrated with a Flash Tank and a Reheater”. Results in Engineering (2023): Cite Score-3.9, SJR rank-Q-1

Taspia Shawkat Chowdhury, Fatima Tasneem Mohsin, Morium Mannan Tonni, Mita Noor Hasan Mita, M Monjurul Ehsan. “A Critical Review on Gas Turbine Cooling Performance and Failure Analysis of Turbine Blades”. International Journal of Thermofluids (2023): Cite Score-6.6, SJR rank-Q-1

Md Walid Faruque, Yasin Khan, Mahdi Hafiz Nabil, M Monjurul Ehsan. “Parametric Analysis and Optimization of a Novel Cascade Compression-Absorption Refrigeration System Integrated with a Flash Tank and a Reheater”. Results in Engineering (2023): Cite Score-3.9, SJR rank-Q-1

MS Hossain, MAI Rahat, MSH Khan, S Salehin, MR Karim, Solar-driven Dish Stirling System for sustainable power generation in Bangladesh: A case study in Cox’s Bazar, Heliyon (2023), Vol. 9, Issue 3. https://doi.org/10.1016/j.heliyon.2023.e14322 (Impact Factor: 4.0, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

M. Walid Faruque, Y. Khan, M. Hafiz Nabil, M. Monjurul Ehsan, and A. Karim, “Thermal Performance Evaluation of a Novel Ejector-Injection Cascade Refrigeration System,” Thermal Science and Engineering Progress, vol. 39, p. 101745, Mar. 2023, doi: 10.1016/j.tsep.2023.101745.

Md Maruf Ahmed, M. Monjurul Ehsan. “Design and Off-Design Performance Analysis of a Zigzag Channeled Pre-cooler for Indirect Cooling System of Supercritical CO2 Recompression Cycle incorporated with a Flow-Bypass System”. Applied Thermal Engineering (2023): Impact factor-6.46, Cite Score-10.7, SJR rank-Q-1

Faruque, Md Walid, Yasin Khan, Mahdi Hafiz Nabil, M. Monjurul Ehsan, and Azharul Karim. "Thermal Performance Evaluation of a Novel Ejector-Injection Cascade Refrigeration System." Thermal Science and Engineering Progress (2023): 101745. Impact factor-4.56, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S2451904923000987

M. Nasim, U. Galvanetto, Muscle activity on head-first compression responses of a finite element neck model, Forces in Mechanics; 10: 100163 (2023). doi.org/10.1016/j.finmec.2022.100163

Farzad Hossain, Md. Jahid Hossain, Md Zakaria Sarkar, Md. Rezwanul Karim, Arafat A. Bhuiyan, Prediction of carbon capture and sequestration (CCS) technology in a 125 MW tangentially coal-fired subcritical thermal power plant for retrofitting in Bangladesh, Results in Engineering, In Press, Journal Pre-Proof, 101159, 2023. Quartile: Q2, Impact Factor: 5.0, DOI: https://doi.org/10.1016/j.rineng.2023.101159

Electrical and Electronic Engineering

R. H. Ratul, M. Tasnim, Hwang-Cheng Wang, R. H. Badhon, Mohammad T. Kawser, “The Potential Impact of a High-Frequency Telecommunication Network on Cognitive Functions: A Review”, Foundations, ISSN 2673-9321, vol. 4, no. 1, pp. 14-31, December 2023. DOI:10.3390/foundations4010003

M. S. H. Rifat and M. Jahangir Alam, "Device Modeling and Optimization of Lead-Free Perovskite/Kesterite Tandem solar cell using SCAPS-1D simulation", Energy Conference 2023: National and Global issues, 14-15 December 2023, BUET, Dhaka, Bangladesh.

"Survival Analysis of Breast Cancer Patients: A Population-Based Study from SEER", (IEEE), DOI: 10.1109/ICECET58911.2023.10389236

A. U. R. Adib, W. B. I. Rashid, M. A. R. Jahin, H. J. Apon and M. S. Abid, "A Novel Time of Use Tariff Scheme Using Artificial Hummingbird Algorithm for Demand Side Management of a Residential City in Bangladesh," 2023 7th International Symposium on Innovative Approaches in Smart Technologies (ISAS), Istanbul, Turkiye, 2023, pp. 1-7, doi:10.1109/ISAS60782.2023.10391414.

M. S. Rahman, A. I. Keats, M. A. Kabir, A. Newaz and M. M. Islam, "Survival Analysis of Breast Cancer Patients: A Population-Based Study from SEER," 2023 International Conference on Electrical, Computer and Energy Technologies (ICECET), Cape Town, South Africa, 2023, pp. 1-6, doi: 10.1109/ICECET58911.2023.10389236.

M. T. R. Tamim, S. S. Aslam, F. Sohel, A. Ahmed, H. J. Apon and M. S. Abid, “Optimum Sizing and Placement of Solar/Wind/Biogas Generating Units Using Dandelion Optimizer,” 2023 International Symposium on Fundamentals of Electrical Engineering (ISFEE), Bucharest, Romania, 2023, pp. 1 6, doi: 10.1109/ISFEE60884.2023.10637228.

Muhammad, Md Fokhrul Islam, R. Saidur, ''A mini-review on Techno-Economic Assessment of Hydrogen Production to Achieve Sustainable Development Goals", International Conference on Advanced Materials & Sustainable Energy Technologies 2023 (AMSET2023), 30th – 31st October 2023 | Malaysia

Bah, Haruna A. and Ceesay, Modou Lamin and Muhammad, Techno-Economic Feasibility Study on Hybrid Renewable Energy for Electricity and Hydrogen Production. Available at http://dx.doi.org/10.2139/ssrn.4613902

A. Ali et al., "Power System Harmonics Estimation: A new optimization technique-based implementation with African Vulture Optimization Algorithm based Least Square Method," 2023 First International Conference on Advances in Electrical, Electronics and Computational Intelligence (ICAEECI), Tiruchengode, India, 2023, pp. 1-7, doi: 10.1109/ICAEECI58247.2023.10370852.

A. Ali, M. Ahmed, H. J. Apon, M. S. Rahman, A. Ahsan, S. T. Prapti, and A. Ahmed, “Power system harmonics estimation: A new optimization technique-based implementation with African vulture optimization algorithm based least square method,” in 2023 First International Conference on Advances in Electrical, Electronics and Computational Intelligence (ICAEECI), pp. 1–7, 2023, doi: 10.1109/icaeeci58247.2023.10370852.

Newaz, A., Mohosheu, M. S., & Al Noman, A. (2023). Predicting complications of myocardial infarction within several hours of hospitalization using data mining techniques. Informatics in Medicine Unlocked, 101361. https://doi.org/10.1016/j.imu.2023.101361

R. H. Ratul, M. Iqbal, Jen-Yi Pan, M. M. Deen, Mohammad T. Kawser, M. M. Billah, “Performance Comparison between VoLTE and non-VoLTE Voice Calls during Mobility in Commercial Deployment: A Drive Test-Based Analysis”, International Conference on Electrical Engineering, Computer Science and Informatics (EECSI), pp. 446-452, Palembang, Indonesia, September 20-21, 2023. DOI: 10.1109/EECSI59885.2023.10295903

"Oxidation-resistant nanosensor: A label free, on-chip sensing approach of protein concentration, salinity, tissue classification", (Results in Physics, Q2, Impact factor: 5.3 ). Doi: https://doi.org/10.1016/j.rinp.2023.106956

M. S. Sadid, A. Alavi, M. Rafique, M. A. Farhad, Mohammad T. Kawser, “Performance Comparison of DPS in NOMA for Different MIMO Antenna Configurations”, International Conference on Computer and Communication Engineering (ICCCE), Kuala Lumpur, Malaysia, August 15-16, 2023. DOI: 10.1109/ICCCE58854.2023.10246043

Md Rezaul Hoque Khan, Md Sanowar Hosen, Atiqul Alam Chowdhury, Mohammad Rakibul Islam, Fahim Faisal, Mirza Muntasir Nishat, Nafiz Imtiaz Bin Hamid, "Silicate-glass based photonic crystal fiber for rapid petro-chemical sensing: Design and analysis", Sensing and Bio-Sensing Research, 2023, 100579. https://doi.org/10.1016/j.sbsr.2023.100579

A. Newaz, M. O. Faruque, R. A. Mahmud, R. H. Sagor and M. Z. M. Khan, "Machine Learning Enabled Multimode Fiber Specklegram Sensors: A Review," in IEEE Sensors Journal, doi: 10.1109/JSEN.2023.3298169.

Abid, Md. S., Apon, H. J., Nafi, I. M., Ahmed, A., Ahshan, R. (2023). Multi-Objective Architecture for Strategic Integration of Distributed Energy Resources and Battery Storage System in Microgrids. Journal of Energy Storage, 72, 108276. https://doi.org/https://doi.org/10.1016/j.est.2023.108276

"ZrN-based Plasmonic Sensor: A Promising Alternative to Traditional Noble Metal-based Sensors for CMOS-Compatible and Tunable Optical Properties”, (Optics Express, Q1, H-index: 297, ranked 1 in the world according to eigenfactor in optics category ) Doi: https://doi.org/10.1364/OE.494550

“Plasmonic Sensor for Rapid Detection of Water Adulteration in Honey and Quantitative Measurement of Lactose Concentration in Solution”, (Results in Physics, Q2 ,Impact factor: 5.3).

S. M. Hussain, E.R. Das, A. Islam, A. Ghosh, N.S.B Shakhawat, A. A. Mahmood and A. R. Jowel, “Development of a Bengali Speech-based Emotion Analysis System” in International Conference on Advances in Electronics, Communication, Computing and Intelligent Information Systems (ICAECIS-2023), 07 July 2023 (pp. 156- 162). IEEE. doi: 10.1109/ICAECIS58353.2023.10170417

R. H. Ratul, S. M. Zaman, H. A. Chowdhury, M. Z. H. Sagor, Mohammad T. Kawser, M. M. Nishat, “Atmospheric Influence on the Path Loss at High Frequencies for Deployment of 5G Cellular Communication Networks”, International Conference on Computing Communication and Networking Technologies (ICCCNT), Delhi, India, July 6-8, 2023. DOI: https://doi.org/10.48550/arXiv.2306.01894

M. K. Mahadi, S. R Abir, A. M Moon, M.A.N Islam, M.M Nishat et al., "Machine Learning Assisted Decision Support System for Prediction of Prostrate Cancer," 2023 20th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON), Nakhon Phanom, 2023, IEEE, Thailand.

R. T. B. Bari, T. Rahman, M. J. Punny, M. M. Mian, F. Faisal and M. M. Nishat, "Investigation of the Impact of AC Harmonics on Lead Acid Battery Degradation," 2023 IEEE IAS Global Conference on Emerging Technologies (GlobConET), 2023, pp. 1-5, London, United Kingdom, IEEE

Ratul, I.J., Nishat, M.M., Faisal, F., Sultana, S., Ahmed, A. and Al Mamun, M.A., 2023. Analyzing perceived psychological and social stress of university students: A machine learning approach. Heliyon, p.e17307. (Q1, SCIE, IF: 3.77)

Zareen Mustafa, Mohammad Rakibul Islam, Md. Aminul Islam, Nafiz Imtiaz Bin Hamid, "Topas-based octa-circular cladding and rectangular porous core photonic crystal fibre for terahertz waveguide"- IET Optoelectronics. 17(5), 202-213 (2023). https://doi.org/10.1049/ote2.12093

J Jang, JH Cheon, KIM Junyeong, LEE Suhui, C Yuanfeng, MM Billah, "Driving circuit and display including the same" US Patent 11,663,978

M. S. H. Rifat et al., "Application of Binary Slime Mould Algorithm for Solving Unit Commitment Problem," in IEEE Access, vol. 11, pp. 45279-45300, 2023, doi: 10.1109/ACCESS.2023.3273928.

Khan, M.R.H.; Chowdhury, A.A.; Islam, M.R.; Hosen, M.S.; Mim, M.H.; Nishat, M.M. Wave-Shaped Microstructure Cancer Detection Sensor in Terahertz Band: Design and Analysis. Appl. Sci. 2023, 13, 5784. https://doi.org/10.3390/app13095784

“Plasmonic Refractive Index Sensing in the Early Diagnosis of Diabetes, Anemia, and Cancer: An Exploration of Biological Biomarkers”, (Results in Physics, Q2, Impact factor: 5.3 ). Doi: https://doi.org/10.1016/j.rinp.2023.106478

“Fuel Classification and Adulteration Detection Using a Highly Sensitive Plasmonic Sensor”, (Sensing and Bio-Sensing Research, Q2, Impact factor: 5.3). Doi: https://doi.org/10.1016/j.sbsr.2023.100560

Dual Peak Double Resonance Sensing Using a Dual Plasmonic Material PCF-SPR Sensor doi: 10.1007/s11468-023-01829-6

Orka, N.A., Muhaimin, S.S., Shahi, M.N.S. and Ahmed, A., 2022. An Enhanced Gradient Based Optimized Controller for Load Frequency Control of a Two Area Automatic Generation Control System. In Engineering Applications of Modern Metaheuristics (pp. 79-107). Cham: Springer International Publishing.

Abdussami, M.R., Ahmed, A. and Sakib, T.H., 2023. A novel approach for optimal energy resources mixing in nuclear-renewable microgrids using probabilistic energy modelling method. Energy Conversion and Management, 282, p.116862.

Tasnim Ahmed, Ahnaf Munir, Sabbir Ahmed, Md. Bakhtiar Hasan, Md. Taslim Reza, and Md. Hasanul Kabir (9-12 March, 2023). "Structure-Enhanced Translation from PET to CT Modality with Paired GANs." 6th International Conference on Machine Vision and Applications (ICMVA), 2023 Singapore

S. Priyadarshi, M. M. Billah, T. B. Lim, S. S. Urmi, and J. Jang. Reduced Dynamic Gate Pulse Stress Instability in Dual Gate a-InGaZnO Thin Film Transistors, IEEE Electron Device Letters 44(3), 428-431, 2023. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

"A numerical analysis of a highly sensitive hexagonal plasmonic refractive index sensor”, (Optics Communications, Q2, H-index: 147 ). Doi: https://doi.org/10.1016/j.optcom.2022.129205

Mohammad T. Kawser, Kazi M. A. Hassan, Md. A. Haque, Sakif Ahmed, Mohammad R. Akram, “Quick Handover in 5G for High Speed Railways and Highways Using Forward Handover and PN Sequence Detection”, International Journal of Electronics and Telecommunications, vol. 69, no. 1, pp. 147-153, February 2023. DOI: 10.24425/ijet.2023.144344 2023.

Md. Taslim Reza, Nchouwat Ndumgouo Ibrahim Moubarak, Mohammad Rakibul Islam, Muhammad Rezaul Hoque Khan, Mirza Muntasir Nishat (). "Optimization of breast cancer ablation volume by ultrasonic pressure field characterization", Sensing and Bio-Sensing Research, Volume-39, Article ID-100553, February 2023

Abid, M. S., Apon, H. J., Alavi, A., Hossain, M. A., & Abid, F. (2022). Mitigating the effect of electric vehicle integration in distribution grid using slime mould algorithm. Alexandria Engineering Journal. https://doi.org/10.1016/j.aej.2022.09.022

Rahman, M., Islam, M.R., Siraz, S. et al. A high crosstalk modified D-shaped single-polarization filter for S and U band optical communication. Opt Quant Electron 55, 276 (2023). https://doi.org/10.1007/s11082-023-04542-0

Reza, M. T., Moubarak, N. N. I., Islam, M. R., Khan, M. R. H., & Nishat, M. M. (2023). Optimization of breast cancer ablation volume by ultrasonic pressure field characterization. Sensing and Bio-Sensing Research, 39, 100553.

Anjum, T., Khan, A.B. and Muhammad (2022). Towards sustainable energy technologies at a COVID-19 hospital in Dhaka, Bangladesh. International Journal of Renewable Energy Resources, Publisher: UMPEDAC Center, University of Malaya. https://vmis.um.edu.my/index.php/IJRER/article/view/36406. Dec 6, 2022, vol:12 No:02

S. S. Urmi, M. M. Billah, S. Priyadarshi, J. Bae, B. Jung, S. Lee, K. Kim, J. Shin, S. Choi, J. Lim, T. Kang, C. Lee, and J. Jang. Highly Robust Flexible Poly-Si Thin Film Transistor Under Mechanical Strain With Split Active Layer for Foldable Active Matrix Organic Light Emitting Diode Display. IEEE Electron Device Letters 44(1), 80-83, 2023. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

A. J. Mahmud, M. H. Mithun, M. A. Khan, F. Faisal, M. M. Nishat and M. A. Hoque, "Optimal Control and Performance Enhancement of DC-DC Bidirectional SEPIC Converter," 2022 IEEE 13th Annual Ubiquitous Computing, Electronics & Mobile Communication Conference (UEMCON), pp. 0437-0443, IEEE, New York, USA

Technical and Vocational Education

Khan, M. S. H., Salele, N., Hasan, M., Alam, F., & Mugigayi, F. (2023). “Students’ Level of Awareness, and Readiness” - Does It Matter in Implementing Outcome Based Education in Engineering Education? 5th International Conference on Engineering Education and Innovation (ICEEI 2023), Bali Island, Indonesia.

Khan, M. S. H. Salele, N., Hasan, M., Alam, F. & Fahadi, M. (2023). ‘Students’ Level of Awareness, and Readiness” - Does It Matter in Implementing Outcome Based Education in Engineering Education? Paper presented at 6th International Conference on Engineering Education and Innovation (ICEEI 2023), Bali, Indonesia, 16-18, December 2023

Badjie, O., Al Mamun, M. A., Ekuban, C. A. A., & Velankar, Y. (2023). Exploring Assessment Practices in Engineering Education: Validation of the Student Perception of Assessment Questionnaire. 2023 IEEE 11th Region 10 Humanitarian Technology Conference (R10-HTC), 254–259. https://doi.org/10.1109/R10-HTC57504.2023.10461910

S. S. Shimu, M. Maurer, and F.A. Haolader. TVET is Under-Resourced and Held in Low Regard: Teachers’ Perceptions of TVET in Bangladesh. Submitted to the Journal of Education + Training in October 2023 (under review).

Khan, M. S. H., Salele, N., Hasan, M., & Abdou, B. O. (2023). Factors affecting student readiness towards OBE implementation in engineering education: Evidence from a developing country. Heliyon, 9 (10), (SSCI + Scopus Indexed): Impact Factor of 4.00

M.N. Hossain and F.A. Haolader. Environment-Friendly (Green) and Safety Practices, and Skills Supply and Demand Gap in Refrigeration and Air-Conditioning Servicing Sector: Case of Bangladesh. Submitted to Heliyon, a multidisciplinary journal, in Nov 2023. (under review).

M. Maurer, F.A. Haolader, S.S. Shimu. VET for all: Assessing the case of Bangladesh. International Journal of Educational Development. Volume 101, June 2023. https://doi.org/10.1016/j.ijedudev.2023.102819.

F.A. Haolader and S.S. Shimu. ‘A Comparison of National Qualifications Frameworks and Recognition, Validation, and Accreditation Mechanism of Informal learning in VET among Selected Countries.’ Submitted to Springer International Publishing, Germany. (in press).

Khan, M. S. H., Salele, N., Hasan, M., & Abdou, B. O. (2023). Factors affecting student readiness towards OBE implementation in engineering education: Evidence from a developing country. Heliyon, 9(10), e20905. https://doi.org/https://doi.org/10.1016/j.heliyon.2023.e20905

F.A. Haolader and N. Hossain. The Relations of TVET Curricula to Skills Required for Refrigeration and Air-conditioning Servicing Technicians in Bangladesh. Presented at Thai-German TVET Conference on Research Cooperation in Southeast Asia 2023, held in Bangkok, Thailand on 25-26 September 2023.

Khan, M. S. H. (2023). Exploring the Benefits of Skills Acquisition for Poverty Eradication in Bangladesh during 4IR: What VET system of Bangladesh needs to learn Paper presented at the Thai-German TVET Conference on Research Cooperation in Southeast Asia 2023, Bangkok, Thailand, 25-26 September 2023.

M.A. Habib, M.A. Zinnah, M. Wahiduzzaman, M. Tariq Ahsan, M.S. Malak, M.K. Islam, S. Ahsan, D. Hossain, M.A. Salam, M.S.H. Khan et al. (2023). Impact of Gender-Inclusive Pedagogies for strengthening Student’s sense of belonging: A cross-country study of Bangladesh, Bhutan, Nepal, Timor- Leste and Vietnam, Paper presented at 44th Annual Conference of the International School Psychology Association (ISPA) 05 -08 July, 2023, Bologna, Italy (Page 252)

Ratul, I. J., Nishat, M. M., Faisal, F., Sultana, S., Ahmed, A., & Al Mamun, M. A. (2023). Analyzing Perceived Psychological and Social Stress of University Students: A Machine Learning Approach. Heliyon, 9(6), e17307. https://doi.org/10.1016/j.heliyon.2023.e17307

Arnob, M. S. H., Arham, M. A., Islam, R., Nawar, N., Hasan, S. M., Saif, N. B., Arpon, A. I., & Al Mamun, M. A. (2023). Scientific mapping of the research in microbial and chemical contamination of potable water in Bangladesh: A review of literature. Environmental Science and Pollution Research, 30(31), 76421–76436. https://doi.org/10.1007/s11356-023-27853-x

Hasan, S. M., Arpon, A. I., Arnob, M. S. H., Saif, N. B., Nawar, N., Arham, M. A., Islam, R., & Al Mamun, M. A. (2023). Mapping the optimization of groundwater abstraction research: A bibliometric review in the context of South Asian region. Heliyon, 9(6), e17528. https://doi.org/10.1016/j.heliyon.2023.e17528

F.A. Haolader. Designing, Developing and Delivering TVET Courses in Blended Learning/ E-Learning Approach: Sharing Experience from Germany and Bangladesh. Presented at the foundation training for BCS Technical Teachers organised by BIAM Foundation, Bangladesh, April, 2023.

Khalid, M., Khan, M. S. H., & Gregory, S. (2023). Contextual variation on teachers’ conceptions of ICT-enhanced teaching in engineering education. Heliyon, 25 (3), (SSCI Journal) Impact Factor: 3.87

Malak, M.S., Ahsan, M.T., Habib, M.A., Wahiduzzaman, M., & Khan, M. S. H. (2023). Change in Secondary School Teachers' Self-efficacy as an impact of Gender and Inclusive Pedagogies in Bangladesh, Paper presented at 4th International conference on Islamic Education, organized by ITTISHAL & Asian Centre for Inclusive Education (ACIE), 01 February, 2023, Bali, Indonesia (Page 55-56).

S. I. Shakeel, F.A. Haolader and Sharifa Sultana (2023). Exploring dimensions of blended learning readiness: Validation of scale and assessing blended learning readiness in the context of TVET Bangladesh. Heliyon 9(2):e12766. January 2023. DOI: 10.1016/j.heliyon.2022.e12766.

F. A. Haolader, M. Sharfuddin, O. Ahmed, M. Maniruzzaman, M. A. Hosen, P.S. Chowdhury and M. Mustafa. F.U. Ahmed (Eds.) Electrical Maintenance Work- 2. Publisher: National Education Program and Text Book Board Bangladesh. 2022.

F. A. Haolader, M. Maniruzzaman, M. A. Hosen, M. Sharfuddin, O. Ahmed, P.S. Chowdhury and M. Mustafa. F.U. Ahmed (Eds.) Electrical Maintenance Work- 1. Publisher: National Education Program and Text Book Board Bangladesh. 2022.

Al Mamun, M. A., & Lawrie, G. (2023). Student-content interactions: Exploring behavioural engagement with self-regulated inquiry-based online learning modules. Smart Learning Environments, 10(1), 1–31. https://doi.org/10.1186/S40561-022-00221-X

Shakeel, S. I., Al Mamun, M. A., & Haolader, M. F. A. (2023). Instructional design with ADDIE and rapid prototyping for blended learning: validation and its acceptance in the context of TVET Bangladesh. Education and Information Technologies, 28(6), 7601–7630. https://doi.org/10.1007/s10639-022-11471-0

Computer Science and Engineering

Md. Tariquzzaman, Md Wasif Kader, Audwit Anam, Naimul Haque, Mohsinul Kabir, Hasan Mahmud, and Md Kamrul Hasan. 2023. the_linguists at BLP-2023 Task 1: A Novel Informal Bangla Fasttext Embedding for Violence Inciting Text Detection. In Proceedings of the First Workshop on Bangla Language Processing (BLP-2023), EMNLP 2023, pages 214–219, Singapore. Association for Computational Linguistics, https://doi.org/10.18653/v1/2023.banglalp-1.26 [Best Paper award]

Dialog Generation with Conversational Agent in Task-Oriented Context using a Transformer Architecture (ICCIT) [DOI: 10.1109/ICCIT60459.2023.10441070]

Faysal Petouo, Yaya Arafat, Mueeze Mushabbir, Dr. Kamrul Hasan and Hasan Mahmud, " Dialog Generation with Conversational Agent in Task-Oriented Context using a Transformer Architecture", 26th International Conference on Computer and Information Technology (ICCIT), 13-15 December, 2023, Cox's Bazar, Bangladesh. https://doi.org/10.1109/ICCIT60459.2023.10441070

M. S. Islam, I. Hussain, M. M. Rahman, S. J. Park, and M. A. Hossain, “Explainable artificial intelligence model for stroke prediction using eeg signal”, Sensors, vol. 22, no. 24, 2022, issn: 1424-8220, (SCIE)

S. Aziz, N. H. Arif, S. Ahbab, S. Ahmed, T. Ahmed and M. H. Kabir, "Improved Speech Emotion Recognition in Bengali Language using Deep Learning," in 26th International Conference on Computer and Information Technology (ICCIT), December 2023, pp. 1–6.

M. H. Rafi, M. Ratul Mahjabin, M. S. Rahman, M. H. Kabir and S. Ahmed, "A Critical Analysis of Deep Learning Applications in Crop Pest Classification: Promising Pathways and Limitations," in 26th International Conference on Computer and Information Technology (ICCIT), December 2023, pp. 1-6.

Alvi Khan, Fida Kamal, Nuzhat Nower, Tasnim Ahmed, Sabbir Ahmed, and Tareque Chowdhury. "NERvous About My Health: Constructing a Bengali Medical Named Entity Recognition Dataset." EMNLP Findings (2023), ACL, Singapore

Ridwan Mahbub, Ifrad Khan, Samiha Anuva, Md Shihab Shahriar, Md Tahmid Rahman Laskar, and Sabbir Ahmed. "Unveiling the Essence of Poetry: Introducing a Comprehensive Dataset and Benchmark for Poem Summarization." EMNLP Main (2023), ACL, Singapore

Alvi Khan, Fida Kamal, Mohammad Abrar Chowdhury, Tasnim Ahmed, Md Tahmid Rahman Laskar, and Sabbir Ahmed. "BanglaCHQ-Summ: An Abstractive Summarization Dataset for Medical Queries in Bangla Conversational Speech." EMNLP BLP workshop (2023), ACL, Singapore

Ramisha Baki, Afnan Mumu, Riyadil Zannat, Mouneeta Rahman, Hasan Mahmud, and Muhammad Nazrul Islam, Usability Analysis of Augmented Reality-Based Learning Applications for Kids: Insights from SUS and Heuristic Evaluation. In: Martins, N., Brandão, D. (eds) Advances in Design and Digital Communication IV. DIGICOM 2023. Springer Series in Design and Innovation , vol 35. Springer, Cham. https://doi.org/10.1007/978-3-031-47281-7_10

Faysal Petouo, Yaya Arafat, Mueeze Mushabbir, Dr. Kamrul Hasan and Hasan Mahmud, " Dialog Generation with Conversational Agent in Task-Oriented Context using a Transformer Architecture", 26th International Conference on Computer and Information Technology (ICCIT), 13-15 December 2023, Cox’s Bazar, Bangladesh.

T. Tajwar, M. Rahman, T. A. Chowdhury, S. Ahmed, M. Farazi and M. H. Kabir, "Improving Zero-Shot Semantic Segmentation using Dynamic Kernels," in International Conference on Digital Image Computing: Techniques and Applications (DICTA), December 2023, pp. 395--402.

Tauseef Tajwar, Muftiqur Rahman, Taukir Azam Chowdhury, Sabbir Ahmed, Moshiur Farazi, and Md Hasanul Kabir. "Improving Zero-Shot Semantic Segmentation using Dynamic Kernels." In DICTA (2023), IEEE, Australia.

Kuan, Li-Hao, Pedram Parnianpour, Rafsanjany Kushol, Neeraj Kumar, Tanushka Anand, Sanjay Kalra, and Russell Greiner. "Accurate personalized survival prediction for amyotrophic lateral sclerosis patients." Scientific Reports 13, no. 1 (2023): 20713.

S M Rayeed, Sidratul Tamzida Tuba, Hasan Mahmud, Mumtahin Habib Ullah Mazumder, Saddam Hossain Mukta, Kamrul Hasan, "BdSL47: A complete depth-based Bangla sign alphabet and digit dataset", Data in Brief, Volume 51, 2023, 109799, ISSN 2352-3409, https://doi.org/10.1016/j.dib.2023.109799. (https://www.sciencedirect.com/science/article/pii/S2352340923008612) [Web of Science/ESCI/Scopus, IF: 1.4] [Q2: Multidisciplinary, Computer Science]

Maliha Noushin Raida, Zannatun Naim Sristy, Nawshin Ulfat, Sheikh Moonwara Anjum Monisha, Md. Jubair Ibna Mostafa, and Md. Nazmul Haque. “A study on classifying stack overflow questions based on difficulty by utilizing contextual features” in Journal of Systems and Software, Volume: 208:111884, 2024. Elsevier

A Novel Informal Bangla Fasttext Model for Violence Inciting Text Detection. EMNLP 2023 Workshop BLP. (Best Paper)

Mohammad Ridwan Kabir, Hasan Mahmud, Md. Kamrul Hasan, "Acceptability of a head-mounted assistive mouse controller for people with upper limb disability: An empirical study using the technology acceptance model". PLoS ONE 18(10): e0293608. https://doi.org/10.1371/journal.pone.0293608, 31 October 2023 [Web of Science/SCIE/Scopus, IF: 3.752] [Q1: Multidisciplinary, Computer Science]

M. R. Kabir, H. Mahmud, and M. K. Hasan, "Acceptability of a head-mounted assistive mouse controller for people with upper limb disability: An empirical study using the technology acceptance model," in PLOS ONE, vol. 18(10), e0293608, 2023, doi: 10.1371/journal.pone.0293608.

Mohammad Ridwan Kabir, Hasan Mahmud, Md Kamrul Hasan. Acceptability of a head-mounted assistive mouse controller for people with upper limb disability: an empirical study using the technology acceptance model. PLoS One. 2023; 18(10).

A. A. Arnab, K. Ma, A. A. Shuvro and H. Leung, "Comparison of 4G LTE and 5G NR in UAV Networks: A Simu5G-Based Performance Evaluation," 2023 IEEE 9th World Forum on Internet of Things (WF-IoT), Aveiro, Portugal, 2023, pp. 1-6, doi: 10.1109/WF-IoT58464.2023.10539559.

A. A. Arnab, A. A. Shuvro, K. Ma and H. Leung, "A Deep Learning Approach for a QoS Prediction System in Cellular Networks," 2023 IEEE 9th World Forum on Internet of Things (WF-IoT), Aveiro, Portugal, 2023, pp. 1-6, doi: 10.1109/WF-IoT58464.2023.10539507.

Kushol, Rafsanjany, Richard Frayne, Simon J. Graham, Alan H. Wilman, Sanjay Kalra, and Yee-Hong Yang. "Domain adaptation of MRI scanners as an alternative to MRI harmonization." In MICCAI Workshop on Domain Adaptation and Representation Transfer, pp. 1-11. Cham: Springer Nature Switzerland, 2023.

Kushol, Rafsanjany, Pedram Parnianpour, Alan H. Wilman, Sanjay Kalra, and Yee-Hong Yang. "Effects of MRI scanner manufacturers in classification tasks with deep learning models." Scientific Reports 13, no. 1 (2023): 16791.

Huo, Dong, Abbas Masoumzadeh, Rafsanjany Kushol, and Yee-Hong Yang. "Blind Image Deconvolution Using Variational Deep Image Prior." IEEE Transactions on Pattern Analysis and Machine Intelligence (2023).

Asaduzzaman Herok, and Sabbir Ahmed. "Cotton Leaf Disease Identification Using Transfer Learning." 2nd ICICT4SD (2023), IEEE, Dhaka, Bangladesh

Rafid Haque, ABM Ashikur Rahman, and Sabbir Ahmed. "Data-Driven Analysis and Forecasting of COVID-19 Third Wave in SAARC Countries." 2nd ICICT4SD (2023), IEEE, Dhaka, Bangladesh

Kushol, Rafsanjany, Alan H. Wilman, Sanjay Kalra, and Yee-Hong Yang. "DSMRI: Domain Shift Analyzer for Multi-Center MRI Datasets." Diagnostics 13, no. 18 (2023): 2947.

Kushol, Rafsanjany, Collin C. Luk, Avyarthana Dey, Michael Benatar, Hannah Briemberg, Annie Dionne, Nicolas Dupré et al. "SF2Former: Amyotrophic lateral sclerosis identification from multi-center MRI data using spatial and frequency fusion transformer." Computerized Medical Imaging and Graphics 108 (2023): 102279.

Nowshin Tabassum, Tasfia Tabassum, Fardin Saad, Tahiya Sultana Safa, Hasan Mahmud, Md. Kamrul Hasan, "Exploring the English Accent-independent Features for Speech Emotion Recognition using Filter and Wrapper-based Methods for Feature Selection", Interspeech 2023, 20-24 August, Dublin, Ireland.

Nowshin Tabassum, Tasfia Tabassum, Fardin Saad, Tahiya Sultana Safa, Hasan Mahmud, Md. Kamrul Hasan. Exploring the English Accent-independent Features for Speech Emotion Recognition using Filter and Wrapper-based Methods for Feature Selection. Interspeech 2023, Dublin, Ireland.

Afsana Mimi, Md. Golam Rasul, Tanjila Alam Sathi, Lutfun Nahar Lota,"Personal Thermal Assessment using Feature Reduction and Machine Learning Techniques", at 5th International Conference on Activity and Behavior Computing, Kaiserslautern, Germany,2025.http://dx.doi.org/10.1201/9781032648422-13

Maliha Noushin Raida, Zannatun Naim Sristy, Nawshin Ulfat, Sheikh Moonwara Anjum Monisha, Md. Jubair Ibna Mostafa, Md. Nazmul Haque, “A Study on Classifying Stack Overflow Questions based on Difficulty by Utilizing Contextual Features”, Journal of Systems and Software (2023)

Sabbir Ahmed, "Classification of Plant Disease from Leaf Images Using Few-Shot Learning." PhD diss., Department of Computer Science and Engineering (CSE), Islamic University of Technology (IUT), Board Bazar, Gazipur, Bangladesh, 2022. [MSc Thesis]

Zubair Rahman Tusar, Sadat Bin Sharfuddin, Muhtasim Abid, Md. Nazmul Haque, and Md. Jubair Ibna Mostafa. “Effectiveness of data augmentation and ensembling using transformer-based models for sentiment analysis: Software engineering perspective”. in Proceedings of the 18th International Conference on Software Technologies, (ICSOFT), Rome, Italy, July 10-12, pages 438–447 2023. SciTePress

Mohsinul Kabir*, Obayed Bin Mahfuz*, Syed Rifat Raiyan*, Hasan Mahmud, and Md Kamrul Hasan. 2023. BanglaBook: A Large-scale Bangla Dataset for Sentiment Analysis from Book Reviews. In Findings of the Association for Computational Linguistics: ACL 2023, pages 1237–1247, Toronto, Canada. Association for Computational Linguistics. DOI: 10.18653/v1/2023.findings-acl.80

Syed Rifat Raiyan, Md Nafis Faiyaz, Shah Md. Jawad Kabir, Mohsinul Kabir, Hasan Mahmud, and Md Kamrul Hasan. 2023. Math Word Problem Solving by Generating Linguistic Variants of Problem Statements. In Proceedings of the 61st Annual Meeting of the Association for Computational Linguistics (Volume 4: Student Research Workshop), pages 362–378, Toronto, Canada. Association for Computational Linguistics. DOI: 10.18653/v1/2023.acl-srw.49

Mohsinul Kabir, Obayed Bin Mahfuz, Syed Rifat Raiyan, Hasan Mahmud, and Md Kamrul Hasan. 2023. BanglaBook: A Large-scale Bangla Dataset for Sentiment Analysis from Book Reviews. In Findings of the Association for Computational Linguistics: ACL 2023, pages 1237–1247, Toronto, Canada. Association for Computational Linguistics.

Syed Rifat Raiyan, Md Nafis Faiyaz, Shah Md. Jawad Kabir, Mohsinul Kabir, Hasan Mahmud, and Md Kamrul Hasan. 2023. Math Word Problem Solving by Generating Linguistic Variants of Problem Statements. In Proceedings of the 61st Annual Meeting of the Association for Computational Linguistics (Volume 4: Student Research Workshop), pages 362–378, Toronto, Canada. Association for Computational Linguistics.

Faria Binte Kader, Nafisa Hossain Nujat, Tasmia Binte Sogir, Mohsinul Kabir, Hasan Mahmud, and Md Kamrul Hasan. 2023. “When Words Fail, Emojis Prevail”: A Novel Architecture for Generating Sarcastic Sentences With Emoji Using Valence Reversal and Semantic Incongruity. In Proceedings of the 61st Annual Meeting of the Association for Computational Linguistics (Volume 4: Student Research Workshop), pages 334–351, Toronto, Canada. Association for Computational Linguistics.

Abdullah Al Jobair, Suzad Mohammad, Zahin Raidah Maisha, Md. Jubair Ibna Mostafa, and Md. Nazmul Haque. “The ugly side of stack overflow: An in-depth exploration of the social dynamics of new users’ engagement and community perception of them” in Communications in Computer and Information Science book series (CCIS, volume 1829), pages 243–265, Cham, 2023. Springer

Faria Binte Kader, Nafisa Hossain Nujat, Tasmia Binte Sogir, Mohsinul Kabir, Hasan Mahmud, Md Kamrul Hasan . “When Words Fail, Emojis Prevail”: A Novel Architecture for Generating Sarcastic Sentences With Emoji Using Valence Reversal and Semantic Incongruity. Proceedings of the 61st Annual Meeting of the Association for Computational Linguistics (Volume 4: Student Research Workshop) Pages 334-351.

Md Bakhtiar Hasan, Tasnim Ahmed, Sabbir Ahmed, and Md Hasanul Kabir. "GaitGCN++: Improving GCN-based gait recognition with part-wise attention and DropGraph." Journal of King Saud University-Computer and Information Sciences 35, no. 7 (2023): 101641.

M. M. Rahman, M. S. Islam, M. T. R. Laskar, M. A. Hossain, and A. R. M. Kamal, “Multihop Factual Claim Verification Using Natural Language Prompts”, https://caiac.pubpub.org/pub/ex7vouwq, Canadian Artificial Intelligence Association (CAIAC), Jun. 2023.

M.B. Hasan, T. Ahmed, S. Ahmed, and M. H. Kabir, "GaitGCN++: Improving GCN-based gait recognition with part-wise attention and DropGraph," Journal of King Saud University - Computer and Information Sciences, vol. 35, No. 7, pp, 1-19, July 2023. [SCIE]

Syed Rifat Raiyan, Md Nafis Faiyaz, Shah Md. Jawad Kabir, Mohsinul Kabir, Hasan Mahmud, Md Kamrul Hasan. Math Word Problem Solving by Generating Linguistic Variants of Problem Statements. Proceedings of the 61st Annual Meeting of the Association for Computational Linguistics (Volume 4: Student Research Workshop), Pages 362–378

A.M. Khan, A.Ashrafee, F.S. Khan, M.B. Hasan and M.H.Kabir, "AttResDU-Net: Medical Image Segmentation Using Attention-Based Residual Double U-Net," in International Joint Conference on Neural Networks (IJCNN), June 2023, pp 1-8.

Mohsinul Kabir, Obayed Bin Mahfuz, Syed Rifat Raiyan, Hasan Mahmud, and Md Kamrul Hasan. 2023. BanglaBook: A Large-scale Bangla Dataset for Sentiment Analysis from Book Reviews. In Findings of the Association for Computational Linguistics: ACL 2023, pages 1237–1247, Toronto, Canada. Association for Computational Linguistics.

M. Batin, M. Islam, M. M. Hasan, A. Azad, S. A. Alyami, M. A. Hossain, and S. J. Miklavcic, “Wheat- spikenet: An improved wheat spike segmentation model for accurate estimation from field imaging”, Frontiers in Plant Science, vol. 14, 1226190 (SCIE, Q1)

I. Hussain, R. Jany, R. Boyer, A. Azad, S. A. Alyami, S. J. Park, M. M. Hasan, and M. A. Hossain, “An explainable eeg-based human activity recognition model using machine-learning approach and lime”, Sensors, vol. 23, no. 17, 2023, issn: 1424-8220, (SCIE)

Syed Rifat Raiyan, Md Nafis Faiyaz, Shah Md. Jawad Kabir. 2023. Variational Mathematical Reasoning: Enhancing Math Word Problem Solvers with Linguistic Variants and Disentangled Attention. Department of Computer Science and Engineering (CSE), Islamic University of Technology, Board Bazar, Gazipur-1704, Dhaka, Bangladesh. URI: 103.82.172.44:8080/xmlui/handle/123456789/2092

A. A. Shuvro, M. S. Khan, M. Rahman, F. Hussain, M. Moniruzzaman and M. S. Hossen, "Transformer Based Traffic Flow Forecasting in SDN-VANET," in IEEE Access, vol. 11, pp. 41816-41826, 2023, doi: 10.1109/ACCESS.2023.3270889.

A. A. Shuvro, M. S. Khan, M. Rahman, F. Hussain, M. Moniruzzaman and M. S. Hossen, "Transformer Based Traffic Flow Forecasting in SDN-VANET," in IEEE Access, vol. 11, pp. 41816-41826, 2023, doi: 10.1109/ACCESS.2023.3270889.

Hasnain Karim Rabib, Mostafa Galib, Takia Mosharref Nobo, Tanjila Alam Sathi,Mohammed Saidul Islam, Abu Raihan Mostofa Kamal,Md Azam Hossain,"Gender-based Cyberbullying Detection for Under-resourced Bangla Language", 2022, at 12th International Conference on Electrical and Computer Engineering (ICECE), Dhaka, Bangladesh, 2022. https://doi.org/10.1109/ICECE57408.2022.10088574

M. M. Hasan, M. A. Hossain, N. Alotaibi, F. A. John, and A. AKM, “Binocular rivalry impact on macroblock-loss error concealment for stereoscopic 3d video transmission”, Sensors, 2023, issn: 1424-8220, (SCIE).

Tasnim Ahmed, Ahnaf Munir, Sabbir Ahmed, Md. Bakhtiar Hasan, Md. Taslim Reza, Md. Hasanul Kabir, "StructureEnhanced Translation from PET to CT Modality with Paired GANs", 6𝑡ℎ ICMVA (2023), Singapore.

A. M. Khan, A. Ashrafee, R. Sayera, S. Ivan and S. Ahmed, "Rethinking Cooking State Recognition with Vision Transformers," 2022 25th International Conference on Computer and Information Technology (ICCIT), Cox's Bazar, Bangladesh, 2022, pp. 170-175, doi: 10.1109/ICCIT57492.2022.10055869.

F. T. Lisa, M. Zarif Hossain, S. N. Mou, S. Ivan and M. H. Kabir, "Land Cover and Land Use Detection using Semi-Supervised Learning," 2022 25th International Conference on Computer and Information Technology (ICCIT), Cox's Bazar, Bangladesh, 2022, pp. 164-169, doi: 10.1109/ICCIT57492.2022.10055591.

S. Ahmed, M.B. Hasan, T. Ahmed, M.R.K. Sony and M. H. Kabir, "Less is More: Lighter and Faster Deep Neural Architecture for Tomato Leaf Disease Classification," IEEE Access, vol. 10, pp. 68868-68884, 2022. [SCIE]

A.B.M. Rahman, M.B. Hasan, S. Ahmed, T. Ahmed, M.H. Ashmafee, M.R. Kabir and M. H. Kabir, "Two Decades of Bengali Handwritten Digit Recognition: A Survey," IEEE Access, vol. 10, pp. 92597-92632, 2022. [SCIE]

T. Ahmed, A. Munir, S. Ahmed, M.B. Hasan, M.T. Reza and M.H. Kabir, "Structure-Enhanced Translation from PET to CT Modality with Paired GANs," in International Conference on Machine Vision and Applications (ICMVA), March 2023, pp. 142–146. [Best Presentation Award]

T.A. Belal, G.M. Shahariar and M.H. Kabir, "Interpretable Multi Labeled Bengali Toxic Comments Classification using Deep Learning," in International Conference on Electrical, Computer and Communication Engineering (ECCE), February 2023, pp. 1–6. [Best Paper Award]

S. Ishrak, M.B. Munir and M.H. Kabir, "Dynamic Hand Gesture Recognition using Sequence of Human Joint Relative Angles," in International Conference on Electrical, Computer and Communication Engineering (ECCE), February 2023, pp. 1–6. [Best Paper Award]

C. Sinthia and M.H. Kabir, "Detection and Recognition of Bangladeshi Vehicles’ Nameplates Using YOLOV6 and BLPNET," in International Conference on Electrical, Computer and Communication Engineering (ECCE), February 2023, pp. 1–6.

M. Kamal, C. M. Abdullah, F. Shaiara, A. R. M. Kamal, M. M. Hasan, J.-S. Kim, and M. A. Hossain, “Blockchain-based pension system ensuring security, provenance and efficiency”, IEICE TRANSACTIONS on Information and Systems, vol. E106-D, no. 5, 2023, issn: 1745-1361, (SCIE).

Mohsinul Kabir, Tasnim Ahmed, Md. Bakhtiar Hasan, Md Tahmid Rahman Laskar, Tarun Kumar Joarder, Hasan Mahmud, Kamrul Hasan, DEPTWEET: A typology for social media texts to detect depression severities, Computers in Human Behavior, Volume 139, 2023, 107503, ISSN 0747-5632, https://doi.org/10.1016/j.chb.2022.107503. (https://www.sciencedirect.com/science/article/pii/S0747563222003235) [Web of Science/SSCI/Scopus, IF: 9.9] [Q1: Human-Computer Interaction in Computer Science, Psychology, Arts and Humanities]

Hasan Mahmud, Mashrur M. Morshed and Md. Kamrul Hasan .Quantized depth image and skeleton-based multimodal dynamic hand gesture recognition.Vis Comput (2023). https://doi.org/10.1007/s00371-022-02762-1

Hasan Mahmud, Mashrur M. Morshed, Md. Kamrul Hasan, "Quantized depth image and skeleton-based multimodal dynamic hand gesture recognition", The Visual Computer Journal, 4 January 2023, Springer Nature Switzerland, part of Springer Nature, https://doi.org/10.1007/s00371-022-02762-1 [SCIE/Web of Science indexed, IF 3.5] [Q2: Computer Vision and Pattern Recognition]

Abdullah Al Jobair, Suzad Mohammad, Zahin Raidah Maisha, Md. Jubair Ibna Mostafa, and Md. Nazmul Haque,“The Ugly Side of Stack Overflow: An In-depth Exploration of the Social Dynamics of New Users’ Engagement and Community Perception of Them”, International Conference on Evaluation of Novel Approaches to Software Engineering. Cham: Springer Nature Switzerland, 2022.

Civil & Environmental Engineering

Nazrul, F. B., Karim, M.R., Kamruzzaman, M., ’Assessing Future Extreme Climate Events in Bangladesh: Insights from CMIP6 Multi‑Model Ensemble Projections’, 4th International Conference on Meteorology and Climate Science (ICMCS), Dhaka, Bangladesh, 09‑10 December, 2023.

Sijan, A. H, Siam, S., Nazrul, F. B., Karim, M. R., ’Competitive Removal of Color from Textile Effluents in Bangladesh by Activated Carbon and Lime in Batch and Fixed Bed Column Experiments’, 4th International Conference on Planning, Architecture and Civil Engineering, RUET, Rajshahi, Bangladesh, 12 ‑ 14 October 2023

Faiza, M., Sama, S. A., Jaanvi, C. J. A., Ashrar, A. W., Hossain, M., Raihan, M. A., & Quddus, M. (2024, January 7-11). Analyzing the relationship between built environment, road encroachment and road safety: a comparative study [Poster Presentation]. 103rd Annual Meeting of the Transportation Research Board, Washington, D.C., United States. https://trid.trb.org/View/2335350

Islam, M. M., Zahid, C. Z. B., Umama, M. A., Tareque, T., & Mirmotalebi, S. (2023). Influence of salt-lime stabilization on soil strength for construction on soft clay. Open Journal of Civil Engineering, 13(3), 528-539.

Ahsan, A., Erabee, I. K., Nazrul, F. B., Imteaz, M., El-Sergany, M. M., Shams, S., & Shafiquzzaman, M. (2023). Adsorption process efficiency of activated carbon from date pits in removing pollutants from dye wastewater. Membrane Water Treatment, 14(4), 163.

Shafian, S. A., Zhenqi, J., Shaheduzzaman, M., Nazrul, F. B., Hridoy, D. N., Hossain, M. ’Analysis of the Load Displacement Behaviour of Bored Pile using Different Soil Constitutive Models for Chittagong Soil’, The 8th World Congress on Civil, Structural, and Environmental Engineering (CSEE'23), Lisbon, Portugal, March 29 – 31, 2023. (In proceedinds).

Ahsan, A., Das, S. K., Khan, M. H. R. B., Ng, A. W., Al-Ansari, N., Ahmed, S., ... & Shafiquzzaman, M. (2023). Modeling the impacts of best management practices (BMPs) on pollution reduction in the Yarra River catchment, Australia. Applied Water Science, 13(4), 98.

Sadeek, S. N., Rifaat, S. M., Rahman, A., Sobhan, S. Z. A., Efat, E. R., Anjum, M. A.(2023). A Study on Mobility Solution of Physically Challenged People from Stakeholder’s Perspective. Journal of Engineering and Technology, Vol. 15, No. 1, pp. 1-7.

Sabab, M., Islam, S., Islam, M., Tasnim, J., Rifaat, S. M. (2022). Assessment of Driver’s Attitude and Behaviour of Ride- sharing Servicesfrom Passengers’ Perspective in Dhaka City. Proceedings of the 26th International Conference of Hong Kong Society for Transportation Studies (HKSTS), 12-13 December, 2022, pp. 206- 214.

Labib, R. M. R., Abdal, M. A., Rahman, M. S., Anan, F. F., Mahzabeen, T. Z., Rifaat, S. M. (2022). Assessment of Women’s Safety in Ride-Sharing Services of Dhaka City. Proceedings of the 26th International Conference of Hong Kong Society for Transportation Studies (HKSTS), 12-13 December, 2022, pp. 301- 308.

Ahmed, S., Uddin, M. S., Feroz, S. I., Alam, M. R. B., Farabi, F. A., Uddin, M. M., Rifaat, S. M.(2023). Tendency of Intra-City Bus Drivers to Use Cell Phone WhileDriving Using Ordered Probit Model. 8th Brunei International Conference on Engineering and Technology 2021, AIP Conf. Proc. 2643, 030007-1–030007-9; https://doi.org/10.1063/5.0120743

Sakib, S., Neon, M. N., Mahi, R. B. M., Musfique, I., Rifaat, S. M. (2022). A study on the Intensity of Traffic Induced Noise on Traffic Police at Collector and Arterial Roads in Dhaka City. Proceedings of the 26th International Conference of Hong Kong Society for Transportation Studies (HKSTS), 12-13 December, 2022, pp. 248- 256.

Badhon, F. A., Chowdhury, S. S., Haque, T., Rahman, S., Raihan, M. A., Hossain, M., & Mamun, Md. A. A. (2024). Risk Perception of Vehicle-to-Vehicle Vendors and General Pedestrians: A Comparative Study. Transportation Research Record, 2678(4), 18-29. https://doi.org/10.1177/03611981231182927

Kabir, M. U., Islam, M. S., Nazrul, F. B., Shahin, H. M., ’Comparative Stability and Behabiour Assessment of a Hill Slope on Clayey Sand Hill Tracts’, International Journal of Engineering Trends and Technology (IJETT) 71(1):11‑24, January 2023. Published by Seventh Sense Research Group

S. R. Sabab, H. M. Shahin, M. M. M. Bondhon and M. E. Kabir (2023): Regression Analysis for Predicting Soil Strength in Bangladesh, Jordan Journal of Civil Engineering

Business and Technology Management

Amlan, K.N.H., Uddin, M.S. (Corresponding Author), Mahmud, T., Riyan, N.B. (2023). In:IoT, Cloud Computing and Sensing Technology for smart cities. Intelligent Techniques for Cyber-Physical Systems (Scopus),Taylor and Francis, U.S.A ISBN 9781032452869.

Ilma, S.J., Uddin, M.S. (Corresponding Author), Nahar, K. (2023)). Blockchain based digital currency: Securing with Ai and IoTll”. In: Integrating Artificial Intelligence and Machine Learning with Blockchain Security (Scopus), Cambridge Scholars Publishing, UK, ISBN: 1-5275-3011-6, ISBN13: 978-1-5275-3011-9.

Chowdhury, M. A. I., Uddin, M. S. (Corresponding Author), Ullah, H., Ahmmed, M., & Shadek, M. J. (2023). What causes non-performing loans? evidence from the Islamic banking sector of Bangladesh. International Journal of Accounting & Finance Review (ABDC), 14(1), 11-21. https://doi.org/10.46281/ijafr.v14i1.1926

Tanvir, M.H., Uddin, M.S. (Corresponding Author), Arafat, M.Y., Jane, J.S. (2023). ”Contributions of ML in industry 5. O to sustainable development”. In: Fostering Sustainable Business in Emerging Economies: The Impact of Technology (Scopus). Emerald Publishing, UK, ISBN : 978-1-80455-641-2, eISBN: 978-1-80455-640-5.

Hasan, S., Godhuli, E. R., Rahman, M. S., Mamun, M.A.A. (2023). The adoption of conversational assistants in the banking industry: is the perceived risk a moderator?. Heliyon, 9(9).[Indexed in WOS]

Akhter, T., Mamun, M. A. A, & Azad, M. A. K. (2023). Bibliometric review of tourism destination literature. International Journal of Knowledge Management in Tourism and Hospitality, 3(1), 1-30.

The Impact of Capital Flight on Economic Growth (2023). BUFT Journal of Business & Economics (BJBE), ISSN 2664-9942 (Print) Vol. 4

Chowdhury, M. A. I., Uddin, M. S. (Corresponding Author), Ahmmed, M., Hassan, M. R., & Kabir, M. J. (2023). Potential Risks of Liquidity and Credit Affecting the Efficiency of Islamic Banks in Bangladesh. Cogent Economics & Finance (ESCI, ABDC-B, ABS-1). https://doi.org/10.1080/23322039.2023.2209950.

Alam, S., Miah, R., & Rupa, RA (2023, June). An Analysis of Indian Commercial Dynamism in International Trade, 2021, 1-22.

The Impact of Green HRM Practices on Environmental Performance in Bangladesh: The Mediating Role of Sustainability-Oriented Employee Behavior

Akhter, T., & Azad, M. A. K. (2023). Religiosity and bank earnings management: Revisiting international evidence. China Journal of Accounting Research, 100290. https://doi.org/10.1016/j.cjar.2022.100290 [Indexed in ESCI, Scopus (Cite Score 3.3), ABDC (Rating B), CABS in level 2]

Tahmid, T., Nasrin, F., Saona, P., & Azad, M. A. K. (2024). Revisiting the impact of board characteristics on environmental, social and governance performance: Lessons from European firms. International Journal of Sustainable Economy. https://doi.org/10.1504/IJSE.2024.10053959

Zhao, M., Liu, W., Saif, A. N. M., Wang, B., Rupa, R. A., Islam, K. A., ... & Rahman, M. A. (2023). Blockchain in online learning: A systematic review and bibliographic visualization. Sustainability, 15(2), 1470.

Akther, N., Hoque, Md.R., Saona, P., Azad, Md.A.K. (2023) Sleep disorder among IT professionals: the role of psychological distress and work-family conflict. International Journal of Management Practice,16(6), pp. 708–726.

2022 (273)

6. A. Rakib, M. J. Miah, M. Shahabuddin, Jute lignin for effective adsorption of toxic Cr (VI) ion from aqueous solution, 1st International Conference on Frontier in Sciences (ICFS - 2022), Bangladesh University of Engineering and Technology (BUET), Dhaka-1000, Bangladesh. Presentation No: CHE-CP-15B (Oral), 2022, November, 11 – 12.

5. M. K. Khatun, A.A. Rakib, M. R. Alam, M. J. Miah, M. Shahabuddin, U. Rayhan, Removal of toxic Congo Red dye by sugarcane bagasse Nanocellulose-TiO2 nanoparticles composite from aqueous solution, 1st International Conference on Frontier in Sciences (ICFS - 2022), Bangladesh University of Engineering and Technology (BUET), Dhaka-1000, Bangladesh, Presentation No: CHE-CP-9B (Oral), 2022, November 2022, 11 – 12.

7. Abdullah Al Rakib, Md. Showpon Mredha, Md. Jalil Miah, Md. Shahabuddin, Adsorption of hexavalent chromium from aqueous solution by jute lignin: Equilibrium, kinetics and thermodynamics studies, 1st International Conference of Physical Sciences (ICPS-2022), Shahjalal University of Science and Technologyt, Sylhet, Presentation No: CHE-OP-10 (Oral), 2022, October 21– 23

F Sharmin and M A Basith, “Sillenite-type bismuth ferrite photocatalysts towards efficient removal of organic pollutants from wastewater”, presented at the International Colloquium on Authentic Scientific Publications (ICASP 22), BUET, Dhaka, Bangladesh, 14-15 July 2022

F Sharmin and M A Basith, “Comparative investigation on the structural, optical, and magnetic properties of Dy doped bismuth ferrite nanoparticles prepared by sol-gel and hydrothermal methods”, presented at the International Colloquium on Authentic Scientific Publications (ICASP 22), BUET, Dhaka, Bangladesh, 14-15 July 2022

F Sharmin, F Ara, R Hossain, S Das, M D I Bhuyan and M A Basith, “Synthesis, structure and magnetic characterization of the new double perovskite Nd2FeCrO6”, presented at the International Conference on Physics2022, Atomic Energy, Centre, Dhaka, Bangladesh, 19-21 May 2022

F Sharmin, M A and Basith, “Enhanced solar light driven photocatalytic activity of Gd3+ doped bismuth ferrite nanostructures”, presented (oral) at the International Conference on Physics-2022, Atomic Energy Centre, Dhaka, Bangladesh, 19-21 May 2022

F Sharmin, M A and Basith, “Facile synthesis and characterization of Bi0.9Gd0.1FeO3 nanoparticles for solar light driven photocatalytic degradation of toxic pollutants”, presented at the 2nd International Symposium on Nanotechnology (ISN-2022), American International University of Bangladesh, Dhaka, 24 January 2022

F Sharmin, F Ara, R Hossain, S Das, M D I Bhuyan, and M A Basith, “Insight into the exchange bias, magnetization reversal and optical properties of Nd2FeCrO6 double perovskite”, presented at the 4th International Conference on Physics for Sustainable Development & Technology (ICPSDT2022), CUET, Bangladesh, 22-23 January 2022

Zahurul Islam, A. K. Azad, Md. Jahid Hasan, Rumman Hossain, M. M. Rahman, “Unsteady periodic natural convection in a triangular enclosure heated sinusoidally from the bottom using CNT-water nanofluid”, Results in Engineering, Elsevier publication, Vol. 14_100376, June 2022. https://doi.org/10.1016/j.rineng.2022.100376

Rumman Hossain, Md. Jahid Hasan, A. K. Azad, M. M. Rahman, “Numerical study of low Reynolds number effect on MHD mixed convection using CNT-oil nanofluid with radiation”, Results in Engineering, Elsevier publication, Vol. 14_100446, June 2022. https://doi.org/10.1016/j.rineng.2022.100446

Mechanical and Production Engineering

A. Kabir, F. Kabir, S. N. Chowdhury, S. A. Urmee, & A. H. Rashid, “Literature Review and primary design on Ergonomic Handgrip for Public Transportation”, Proceedings of the 5th International Conference on Industrial & Mechanical Engineering and Operations Management, Dhaka, Bangladesh, December 26-27, 2022. Available at: https://ieomsociety.org/proceedings/2022dhaka/162.pdf

R Hasan, S Shams, M S Rahman, and M H Rahman,”"Numerical Investigation of Local Scour Around Different Shaped Bridge Piers"” published in the proceedings of 12th TSME International Conference on Mechanical Engineering (TSME-ICoME- 2022), Phuket, Thailand .

P.G. Pavan, M. Nasim, V. Brasco, S. Spadoni, F. Paoloni, D. D'Avella, S. F. Khosroshahi, N. de Cesare, K. Gupta, U. Galvanetto, Development of detailed finite element models for in silico analyses of brain impact dynamics, Computer Methods and Programs in Biomedicine; 227: 107225 (2022). doi.org/10.1016/j.cmpb.2022.107225

H.Z. Mawa, M. A. K. Azad, Chowdhury Sadid Alam, M. M. Rahman, 2022, “A Numerical Study of Non- Newtonian Fluid in a Cavity with Corrugated Bottom Wall Using Buongiorno’s Mathematical Model: Numerical Study of Non-Newtonian Fluid in a Cavity", Trends in Sciences, 19(23), pp. 1588-1588.

Md. Jahid Hasan, Arafat A. Bhuiyan, Investigation of thermal performance and entropy generation in a helical heat exchanger with multiple rib profiles using Al2O3-water nanofluid, Case studies in Thermal Engineering, Volume 40, 2022. IF: 6.268, DOI: https://doi.org/10.1016/j.csite.2022.102514

Md. Jahid Hasan, Shams Forruque Ahmed, Arafat A. Bhuiyan, Geometrical and coil revolution effects on the performance enhancement of a helical heat exchanger using nanofluids, Case studies in Thermal Engineering, Volume 35, Pages , 2022. IF: 6.268, DOI: https://doi.org/10.1016/j.csite.2022.102106

Md Walid Faruque, Mohammed Raihan Uddin, Sayedus Salehin, M Monjurul Ehsan, "A Comprehensive Thermodynamic Assessment of Cascade Refrigeration System Utilizing Low GWP Hydrocarbon Refrigerants", International Journal of Thermofluids, Vol 15, pp: 100177, Elsevier (July 2022) [https://www.sciencedirect.com/science/article/pii/S2666202722000416]

Md Walid Faruque,, Mohammed Raihan Uddin, Sayedus Salehin, and M. Monjurul Ehsan. "A Comprehensive Thermodynamic Assessment of Cascade Refrigeration System Utilizing Low GWP Hydrocarbon Refrigerants." International Journal of Thermofluids (2022): 100177. Cite Score-6.6, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202722000416

M. Nasim, M.J. Hasan, U. Galvanetto, Impact behavior of energy absorbing helmet liners with PA12 lattice structures: A computational study, International Journal of Mechanical Sciences; 233: 107673 (2022). doi.org/10.1016/j.ijmecsci.2022.107673

Shadman Mahmud, Mohammad Kazem Kaihan, Sayedus Salehin, Mohammad Tanvirul Ferdaous, Mohammad Nasim, "Hybrid renewable energy systems for a remote community in a high mountain plateau", International Journal of Energy and Environmental Engineering, pp: 1-14, Springer (April 2022) [https://link.springer.com/article/10.1007/s40095-022-00494-5]

Abyaz Abid, Arafat A. Bhuiyan, A finite element analysis approach to design and optimize the static structural impact on a skateboard, Materials Today: Proceedings, Volume , Pages , April 2022.

Farzad Hossain, Md. Rezwanul Karim, Arafat A. Bhuiyan, A review on recent advancements of the usage of nano fluid in hybrid photovoltaic/thermal (PV/T) solar systems, International Journal of Renewable Energy, Vol 188, Pages 114-131, April 2022.

Nasimul Ehsan Chowdhury, Mahmudul Hasan Shakib, Fei Xu, Sayedus Salehin, Arafat A. Bhuiyan, Adverse environmental impacts of wind farm installations and alternative research pathways to their mitigation, International Journal of Cleaner Engineering and Technology, Volume 7, 100415, April 2022.

Md Abdullah Al Mamun, Md Akbar Hossain, Sayedus Salehin, Md Shahadat Hossain Khan, Mahbub Hasan, "Engineering students’ readiness for online learning amidst the COVID-19 pandemic: Scale validation and lessons learned from a developing country", Educational Technology & Society, 25 (3), 1-18. (March 2022) [https://www.jstor.org/stable/48673722]

Yasin Khan, Md Tanbir Sarowar, Mahir Mobarrat, Md. Hamidur Rahman, "Performance Comparison of a Microchannel Heat Sink using different Nano-Liquid-Metal-Fluid Coolant: A numerical study", Journal of Thermal Science and Engineering Applications, March 2022.

Md Walid Faruque, Mahdi Hafiz Nabil, Mohammed Raihan Uddin, M. Monjurul Ehsan, Sayedus Salehin, "Thermodynamic assessment of a triple cascade refrigeration system utilizing hydrocarbon refrigerants for ultra-low temperature applications", Energy Conversion and Management: X, Vol 14, pp: 100207, Elsevier (March 2022) [https://www.sciencedirect.com/science/article/pii/S2590174522000307]

ANM Nihaj Uddin Shan, Md Zayed Mostafa, Arman Hossain, Mohmmad Shadman Sakib, M Monjurul Ehsan (2022, " Thermal Assessment and Optimization of Process Fluids in Transcritical Organic and Transcritical CO2 Rankine Cycle for Waste Energy Recuperating System" Energy Conversion and Management: X (2022): 100258.Cite Score-4.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174522000812

M. Walid Faruque, M. Hafiz Nabil, M. Raihan Uddin, M. Monjurul Ehsan, and S. Salehin, “Thermodynamic assessment of a triple cascade refrigeration system utilizing hydrocarbon refrigerants for ultra-low temperature applications,” Energy Conversion and Management: X, vol. 14, 2022, doi: 10.1016/j.ecmx.2022.100207.

S. Mahmud, M.K. Kaihan, S. Salehin, M.T. Ferdaous, M. Nasim, Hybrid renewable energy systems for a remote community in a high mountain plateau, International Journal of Energy and Environmental Engineering; 13: 1335-1348 (2022). doi.org/10.1007/s40095-022-00494-5

Anayet U Patwari, A.N.M Nihaj Uddin Shan, Md. Zayed Mostafa, Md.Iftekhar uddin Shohan [2022], Experimental Investigations on acoustic energy conversion using single and double PZT film by modified resonator” –Lectures note on Mechanical Engineering-springer Publication, pp. 86–95, 2022 https://doi.org/10.1007/978-981-16-8954-3_9

Anayet U Patwari, A.N.M Nihaj Uddin Shan, Rahnum Tahia Meem [2022], Computational Analysis on tool geometry on cutting process in Turning of AISI 1020 steel-Accepted for publication Lectures note on Mechanical Engineering-springer Publication, LNME, pp. 295–304, 2022 https://doi.org/10.1007/978-981-16-8954-3_28

M.M. Hossain, T. Shahriar, M.A. Habib et al., 2022, "Techno-economic and environment assessment of landfill and sewage treatment plant-based combined power generation system: a case study for Dhaka", Biomass Conversion and Biorefinery. https://doi.org/10.1007/s13399-022-02422-3

Chowdhury Sadid Alam, Radif Uddin Ahmed, M Shafiqur Rahman, 2023, “Tensile and Fatigue Response of Steel Parts Fabricated by The Additive Friction-Stir Deposition Process”, Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition, New Orleans, USA, Oct 29-Nov 2, 2023.

F Hossain, MR Karim, AA Bhuiyan, A review on recent advancements of the usage of nano fluid in hybrid photovoltaic/thermal (PV/T) solar systems, Renewable Energy, Elsevier. (2022), Volume 188, April 2022, pp.114-131. DOI: https://doi.org/10.1016/j.renene.2022.01.116 (Impact Factor: 8.7, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Jahid Hasan, Kazi Tawkir, Arafat A. Bhuiyan, Improvement of an exhaust gas recirculation cooler using discrete ribbed and perforated louvered strip vortex generator , International Journal of Thermofluids, Volume 13, February 2022, 100132.

Nasimul Eshan Chowdhury, Mahmudul Alam Shakib, Fei Xu, Sayedus Salehin, Md Rashidul Islam, Arafat A Bhuiyan, "Adverse environmental impacts of wind farm installations and alternative research pathways to their mitigation", Cleaner Engineering and Technology, Vol 7, pp: 100415, Elsevier (January 2022) [https://www.sciencedirect.com/science/article/pii/S2666790822000209]

Shadman Mahmud, ASM Redwan Haider, Sk Tahmid Shahriar, Sayedus Salehin, ASM Monjurul Hasan, Maria T Johansson, "Bioethanol and biodiesel blended fuels — Feasibility analysis of biofuel feedstocks in Bangladesh", Energy Reports, Volume 8, pp: 1741-1756, Elsevier (January 2022) [https://www.sciencedirect.com/science/article/pii/S2352484722000014]

Electrical and Electronic Engineering

Hasan, Tasnimul, Md Bin Karim, Mahin Khan Mahadi, Mirza Muntasir Nishat, and Fahim Faisal. "Employment of Ensemble Machine Learning Methods for Human Activity Recognition." Journal of Healthcare Engineering, 2022, [SCIE, IF: 3.82]

Hossain, M.A., Ahmed, A., Tito, S.R., Ahshan, R., Sakib, T.H. and Nengroo, S.H., 2022. Multi-Objective Hybrid Optimization for Optimal Sizing of a Hybrid Renewable Power System for Home Applications. Energies, 16(1), p.96.

Nasir Muhammad Munim, Tahmina Tabassum Treena, Mohammad Rakibul Islam and Mirza Muntasir Nishat, “Design and analysis of an ultra-high sensitive and tunable metal-insulator-metal waveguide-coupled octagonal ring resonator utilizing gold nanorods”, Sensing and Bio-Sensing Research, Volume 38, December 2022, 100529. [Scopus Q1 journal]

Newaz, A., Shahriyar Haq, F., Ahmed, N. (2022). Effective Diagnosis of Cervical Cancer Using Balanced Random Forest Classifier. In: Pandit, M., Gaur, M.K., Rana, P.S., Tiwari, A. (eds) Artificial Intelligence and Sustainable Computing. Algorithms for Intelligent Systems. Springer, Singapore. https://doi.org/10.1007/978-981-19-1653-3_15

Mohammad Rakibul Islam, Md Moinul Islam Khan, Fariha Mehjabin, Jubair Alam Chowdhury, Mohibul Islam, Ahmad Jarif Yeasir, Jannat Ara Mim, Tajuddin Ahmed Nahid, “Design of a dual spider-shaped surface plasmon resonance-based refractometric sensor with high amplitude sensitivity”, IET Optoelectronics, 15 November 2022. https://doi.org/10.1049/ote2.12084. [SCIE indexed, JCR Impact Factor: 1.691]

M. R. Kabir, M. M. Muhaimin, M. A. Mahir, M. M. Nishat, F. Faisal and N. N. I. Moubarak, "Procuring MFCCs from Crema-D Dataset for Sentiment Analysis using Deep Learning Models with Hyperparameter Tuning," 2021 IEEE International Conference on Robotics, Automation, Artificial-Intelligence and Internet-of-Things (RAAICON), 2021, pp. 50-55, IEEE.

M. A. Al Mahmud, Mohammad Rakibul Islam, A.N.M. Iftekher, et al., “Design and numerical analysis of a porous core photonic crystal fiber for refractometric THz sensing”, Microsystem Technology, 2022. https://doi.org/10.1007/s00542-022-05396-4. [SCI indexed, JCR Impact Factor: 2.012]

M. R. Kabir, M. M. Muhaimin, M. A. Mahir, M. M. Nishat, F. Faisal and N. N. I. Moubarak, "Procuring MFCCs from Crema-D Dataset for Sentiment Analysis using Deep Learning Models with Hyperparameter Tuning," 2021 IEEE International Conference on Robotics, Automation, Artificial-Intelligence and Internet-of-Things (RAAICON), Dhaka, Bangladesh, 2021, pp. 50-55, doi: 10.1109/RAAICON54709.2021.9929975.

Rahman, M. A., Apon, H. J., Rabbani, M., Maruf, M. H., & Shihavuddin, A. S. M. (2022). Numerical simulation and analysis of the temporal concentration of timolol after topical administration in the human eye. International Journal of Thermofluids, 16, 100251. https://doi.org/10.1016/j.ijft.2022.100251

Md Omar Faruque, Rabiul Al Mahmud, and Rakibul Hasan Sagor. CMOS Compatible Novel Plasmonic Refractive Index Sensor with High Sensitivity Based on Alternative Plasmonic Material. Journal of Optoelectronics and Advanced Materials, 23(September-October 2021), 424-432, (2021)

M. F. Adnan, N. Ahmed, I. Ishraque, M. S. A. Amin and M. S. Hasan, "Traffic Congestion Prediction using Deep Convolutional Neural Networks: A Color-coding Approach," 2022 International Conference on Engineering and Emerging Technologies (ICEET), Kuala Lumpur, Malaysia, 2022, pp. 1-5, doi: 10.1109/ICEET56468.2022.10007425

F. Faisal, M. A. Salam, M. B. Habib, M. S. Islam and M. M. Nishat, "Depth Estimation from Video using Computer Vision and Machine Learning with Hyperparameter Optimization," 2022 4th International Conference on Smart Sensors and Application (ICSSA), 2022, pp. 39-44, IEEE, Kuala Lumpur, Malaysia

I. J. Ratul, U.H. Wani, M. M. Nishat, A. Al-Monsur, A. M. Ar-Rafi, F. Faisal, M. R. Kabir, "Survival Prediction of Children Undergoing Hematopoietic Stem Cell Transplantation Using Different Machine Learning Classifiers by Performing Chi-Square Test and Hyperparameter Optimization: A Retrospective Analysis", Computational and Mathematical Methods in Medicine, vol. 2022, Article ID 9391136, 2022. [SCIE, IF: 2.80]

Hassan, Shahriar, Ali Ahnaf Hassan, Inan Marshad, Muhammad Alif Al Hosain, Musarrat Amin, Fahim Faisal, and Mirza Muntasir Nishat. "Comparative Analysis of Machine Learning Algorithms in Detection of Brain Tumor." In 2022 3rd International Conference on Big Data Analytics and Practices (IBDAP), pp. 31-36, 2022, IEEE, Thailand.

Mohammad Rakibul Islam, Md Moinul Islam Khan, Ahmed Mujtaba Al Naser, Fariha Mehjabin, Fatema Zerin Jaba, Jubair Alam Chowdhury, Fariha Anzum and Mohibul Islam, "Design of a quad channel SPR-based PCF sensor for analyte, strain, temperature, and magnetic field strength sensing", Optical and Quantum Electronics 54, 563, 2022. [SCI indexed, JCR Impact Factor: 2.794]

Shagor, Md, Rafid Kaysar, Samiur Rahman Sami, Mirza Muntasir Nishat, Fahim Faisal, Md Zaman, and Zubayer Ahmed. "Studying the Applicability of Swarm Intelligence in Designing Optimized PI Controller for DC-DC Zeta Converter: A MATLAB-Based Approach." Mathematical Problems in Engineering 2022. [SCIE, IF: 1.43]

Shahi, Md Nazmush Shakib, Sheikh Samit Muhaimin, Mirza Muntasir Nishat, Fahim Faisal, and Mohammad Saifullah Bin Motahar. "Automated Vehicle Access and Exit Control: A Smart Parking Management System using Finite State Machine in VHDL." In 2022 Research, Invention, and Innovation Congress: Innovative Electricals and Electronics (RI2C), pp. 170-177, 2022, IEEE, Bangkok, Thailand.

A. A. Rahman, M. I. Siraji, L. I. Khalid, F. Faisal, M. M. Nishat, A. Ahmed, and A.M Mamun, "Perceived Stress Analysis of Undergraduate Students during COVID-19: A Machine Learning Approach," 2022 IEEE 21st Mediterranean Electrotechnical Conference (MELECON), 2022, pp. 1129-1134, IEEE, Palermo, Italy.

Mohammad Rakibul Islam, Ahmed Mujtaba Al Naser, Fatema Zerin Jaba, Fariha Anzum, Abu Nayeem Mohammad Iftekher, Md Rezaul Hoque Khan, Mirza Muntasir Nishat, “Design of a hexagonal outlined porous cladding with vacant core photonic crystal fibre biosensor for cyanide detection at THz regime”, IET Optoelectronics, 2022. [SCIE indexed, JCR Impact Factor: 1.691].

Md. Moshiur Rahman, Farhana Akter Mou, Mohammed Imamul Hassan Bhuiyan, Md. Abdullah Al Mahmud and Mohammad Rakibul Islam, “Design and characterization of a photonic crystal fiber for improved THz wave propagation and analytes sensing”, Optical and Quantum Electronics, 54, 669, 2022. [SCI indexed, JCR Impact Factor: 2.794]

I. A. Jahan, I. Arafat Jamil, M. S. Hossain Fahim, A. Sabiha Huq, F. Faisal and M. M. Nishat, "Accident Detection and Road Condition Monitoring Using Blackbox Module," 2022 Thirteenth International Conference on Ubiquitous and Future Networks (ICUFN), 2022, pp. 247-252, IEEE, Barcelona, Spain

A. Al–Monsur, M. R. Kabir, A. M. Ar–Rafi, M. M. Nishat and F. Faisal, "Covid-EnsembleNet: An Ensemble Based Approach for Detecting Covid-19 by utilising Chest X-ray Images," 2022 IEEE World AI IoT Congress (AIIoT), 2022, pp. 351-356, IEEE Region-1, Seattle, WA, USA.

Munim, Nasir Muhammad, Tahmina Tabassum Treena, Mohammad Rakibul Islam, and Mirza Muntasir Nishat. "Design and analysis of an ultra-high sensitive and tunable metal-insulator-metal waveguide-coupled octagonal ring resonator utilizing gold nanorods." Sensing and Bio-Sensing Research 38 (2022): 100529 [SCOPUS, Q1]

Faisal, Fahim, Mirza Muntasir Nishat, Nushera Tazreen, Md Faiyed Bin Karim, Afsana Hossain Bristy, and Shafkat Haque. "Ex-Vivo Design of pH meter To Analyze Nutrients Feature Assessment for Economic Domestic Purpose." In 2022 37th International Technical Conference on Circuits/Systems, Computers and Communications (ITC-CSCC), pp. 637-640, 2022, IEEE, Phuket, Thailand.

C. J. Park, M. Choi, S. Lee, H. Kim, T. Lee, M. M. Billah, B. Jung, and J. Jang, Highly sensitive, stretchable pressure sensor using blue laser annealed CNTs, Nanomaterials 12(13), pp. 2127, 2022, [SCIE Q1 indexed, JCR Impact Factor: 5.44].

Rahman, A.A., Siraji, M.I., Khalid, L.I., Faisal, F., Nishat, M.M., Ahmed, A. and Al Mamun, M.A., 2022, June. Perceived Stress Analysis of Undergraduate Students During COVID-19: A Machine Learning Approach. In 2022 IEEE 21st Mediterranean Electrotechnical Conference (MELECON) (pp. 1129-1134). IEEE.

A. Al–Monsur, M. R. Kabir, A. M. Ar–Rafi, M. M. Nishat and F. Faisal, "Covid-EnsembleNet: An Ensemble Based Approach for Detecting Covid-19 by utilising Chest X-ray Images," 2022 IEEE World AI IoT Congress (AIIoT), 2022, pp. 351-356, doi: 10.1109/AIIoT54504.2022.9817237.

Abid, M.S., Apon, H.J., Ahmed, A. and Morshed, K.A., 2022. Chaotic slime mould optimization algorithm for optimal load-shedding in distribution system. Ain Shams Engineering Journal, 13(4), p.101659.

Abid, M. S., Apon, H. J., Ahmed, A., & Morshed, K. A. (2022). Chaotic slime mould optimization algorithm for optimal load-shedding in Distribution System. Ain Shams Engineering Journal, 13(4), 101659. https://doi.org/10.1016/j.asej.2021.101659

Mohammad Rakibul Islam, Kazi Rakibul Hasan, Md. Moinul Islam Khan, Abu Nayeem Mohammad Iftekher, Fariha Mehjabin, Md. Julkar Nayen, Jubair Alam Chowdhury, Saimon Bin Islam and Mohibul Islam, “Design of a Dual Cluster and Dual Array-Based PCF-SPR Biosensor with Ultra-high WS and FOM”, Plasmonics, 2022. [SCIE indexed, JCR Impact Factor: 2.73].

Eisham, Z.K., Haque, M.M., Rahman, M.S., Nishat, M.M., Faisal, F., Islam, M. R., "Chimp optimization algorithm in multilevel image thresholding and image clustering". Evolving Systems (2022), Springer Verlag [SCIE, IF: 2.34]

I. J. Ratul, A. Al-Monsur, B. Tabassum, A. M. Ar-Rafi, M. M. Nishat and F. Faisal, "Early risk prediction of cervical cancer: A machine learning approach," 2022 19th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON), 2022, pp. 1-4, IEEE, Thailand.

M. Islam, M. Tabassum, M. M. Nishat, F. Faisal and M. S. Hasan, "Real-Time Clinical Gait Analysis and Foot Anomalies Detection Using Pressure Sensors and Convolutional Neural Network," 2022 7th International Conference on Business and Industrial Research (ICBIR), 2022, pp. 717-722, IEEE, Bangkok, Thailand.

Infiter Tathfif, Md. Farhad Hassan, Kazi Sharmeen Rashid, Ahmad Azuad Yaseer, Rakibul Hasan Sagor, "A highly sensitive plasmonic refractive index sensor based on concentric triple ring resonator for cancer biomarker and chemical concentration detection," Optics Communications, Volume 519, 2022, 128429, ISSN 0030-4018, https://doi.org/10.1016/j.optcom.2022.128429

S. Lee, H. Lee, Y. G. Kim, J. Lee, A. B. Siddik, M. M. Billah, Thin film transistor, method of manufacturing the same, display panel, and display device. US Patent App. 17/401,467

T. K. Tandra, F. Tajrian, A. Hossain, Mohammad T. Kawser, M. R. Akram and A. B. Shams, “Joint Transmission Coordinated Multipoint on Mobile Users in 5G Heterogeneous Network”, Conference on Information Technology and Data Science (CITDS), pp. 273-278, Debrecen, Hungary, May 16-18, 2022. DOI: 10.1109/CITDS54976.2022.9914149.

M. M. Billah, A. B. Siddik, D. Kim, S. Lee, Y. J. Cho, M. H. Rabbi, and J. Jang, Comparison of In‐folding and Out‐folding Stress on Electrical Performance of Poly‐Si TFTs on Polyimide Substrate for Foldable AMOLED Display, In Proc. SID Display Week Symposium Digest of Technical Papers 53(1), 893, 2022, San Jose, California, USA.

Eisham, Z.K., Haque, M.M., Rahman, M.S. et al. Chimp optimization algorithm in multilevel image thresholding and image clustering. Evolving Systems (2022). https://doi.org/10.1007/s12530-022-09443-3

Zubayer Kabir Eisham, Md. Monzurul Haque, Md. Samiur Rahman, Mirza Muntasir Nishat, Fahim Faisal and Mohammad Rakibul Islam, “Chimp optimization algorithm in multilevel image thresholding and image clustering”, Evolving Systems, 2022. [SCI indexed, JCR Impact Factor: 2.347]

Shadman Abid, M., Apon, H. J., Morshed, K. A., & Ahmed, A. (2022). Optimal planning of multiple renewable energy-integrated distribution system with uncertainties using artificial hummingbird algorithm. IEEE Access, 10, 40716–40730. https://doi.org/10.1109/access.2022.3167395

A. Newaz, N. Ahmed and F. S. Haq, "Diagnosis of Liver Disease using Cost-Sensitive Support Vector Machine Classifier," 2021 International Conference on Computational Performance Evaluation (ComPE), 2021, pp. 421-425, doi: 10.1109/ComPE53109.2021.9752075.

Mirza Muntasir Nishat, Fahim Faisal, Ishrak Jahan Ratul, Abdullah Al-Monsur, Abrar Mohammad Ar-Rafi, Sarker Mohammad Nasrullah, Md. Taslim Reza, Md. Rezaul Hoque Khan (2022) "A Comprehensive Investigation of the Performances of Different Machine Learning Classifiers with SMOTE-ENN Oversampling Technique and Hyperparameter Optimization for Imbalanced Heart Failure Dataset". Scientific Programming, Volume-2022, Article ID 3649406, 2022, Hindawi.

A. Chowdhury, R.R. Razzaque, S. Muhtadi, A. Shafiullah, E.U.I. Abir, B.S. Garra and S.K. Alam, Ultrasound classification of breast masses using a comprehensive Nakagami imaging and machine learning framework," Ultrasonics (2022), Volume 124, 106744, doi: https://doi.org/10.1016/j.ultras.2022.106744

Abid, M.S., Apon, H.J., Morshed, K.A. and Ahmed, A., 2022. Optimal planning of multiple renewable energy-integrated distribution system with uncertainties using artificial hummingbird algorithm. IEEE Access, 10, pp.40716-40730.

S. Muhtadi and H. Hamid, "Analysis of GLRLM Texture Features Derived From Computed Tomography Scans For COVID-19 Diagnosis," 2021 13th Biomedical Engineering International Conference (BMEiCON), 2021, pp. 1-5, doi: 10.1109/BMEiCON53485.2021.9745204.

Rahman, M.M., Mou, F.A., Bhuiyan, M.I.H., Mohammad Rakibul Islam, “Refractometric THz Sensing of Blood Components in a Photonic Crystal Fiber Platform”, Brazilian Journal of Physics, 2022. [SCI indexed, JCR Impact Factor: 1.326].

M. R. Rahman, S. Tabassum, E. Haque, M. M. Nishat, F. Faisal and E. Hossain, "CNN-based Deep Learning Approach for Micro-crack Detection of Solar Panels," 2021 3rd International Conference on Sustainable Technologies for Industry 4.0 (STI), 2021, pp. 1-6, IEEE.

A. Newaz, S. Muhtadi and F.S. Haq, "An intelligent decision support system for the accurate diagnosis of cervical cancer," Knowledge-Based Systems (2022), 108634, doi: https://doi.org/10.1016/j.knosys.2022.108634

Newaz A, Muhtadi S, Haq FS. An intelligent decision support system for the accurate diagnosis of cervical cancer. Knowledge-Based Systems. 2022 Mar 25:108634. https://doi.org/10.1016/j.knosys.2022.108634

Newaz, A., Shahriyar Haq, F., Ahmed, N. (2022). Effective Diagnosis of Cervical Cancer Using Balanced Random Forest Classifier. In: Pandit, M., Gaur, M.K., Rana, P.S., Tiwari, A. (eds) Artificial Intelligence and Sustainable Computing. Algorithms for Intelligent Systems. Springer, Singapore. doi: 10.1007/978-981-19-1653-3_15

Islam, M. R., Naser, A. M. A., Jaba, F. Z., Anzum, F., Iftekher, A. N. M., Khan, M. R. H., & Nishat, M. M. (2022). Design of a hexagonal outlined porous cladding with vacant core photonic crystal fibre biosensor for cyanide detection at THz regime. IET Optoelectronics.

A. A. Rahman, M. I. Siraji, L. I. Khalid, F. Faisal, M. M. Nishat, M.R. Islam and N. N. I. Moubarak, ""Detection of Mental State from EEG Signal Data: An Investigation with Machine Learning Classifiers," 2022 14th International Conference on Knowledge and Smart Technology (KST), 2022, pp. 152-156, IEEE, Thailand.

Mirza Muntasir Nishat et. al, "A Comprehensive Investigation of the Performances of Different Machine Learning Classifiers with SMOTE-ENN Oversampling Technique and Hyperparameter Optimization for Imbalanced Heart Failure Dataset", Scientific Programming, 2022. [SCIE, IF: 1.67]

Sabiq Muhtadi, "Breast Tumor Classification Using Intratumoral Quantitative Ultrasound Descriptors", Computational and Mathematical Methods in Medicine, vol. 2022, Article ID 1633858, 18 pages, 2022. https://doi.org/10.1155/2022/1633858

Islam, M. R., Naser, A. M. A., Jaba, F. Z., Anzum, F., Iftekher, A. N. M., Khan, M. R. H., & Nishat, M. M. (2022). Design of a hexagonal outlined porous cladding with vacant core photonic crystal fibre biosensor for cyanide detection at THz regime. IET Optoelectronics. [SCIE, IF: 1.69]

M. R. Kabir, M. M. Muhaimin, M. A. Mahir and K. Habibul Kabir, "Design and Analysis of an Efficient Energy Sharing System among Electric Vehicles using Evolutionary Game Theory," 2022 International Conference on Artificial Intelligence in Information and Communication (ICAIIC), 2022, pp. 411-416, doi: 10.1109/ICAIIC54071.2022.9722684.

Mohammad Rakibul Islam, A. N. M. Iftekher, M. S. Anzum, M. Rahman and S. Siraz, "LSPR Based Double Peak Double Plasmonic Layered Bent Core PCF-SPR Sensor for Ultra-Broadband Dual Peak Sensing," in IEEE Sensors Journal, vol. 22, no. 6, pp. 5628-5635, 15 March, 2022, doi: 10.1109/JSEN.2022.3149715. [SCIE indexed, JCR Impact Factor: 4.325].

Sakhawat Hossen Rakib, S.M. Masum, Atika Farhana, Md. Aminul Islam, Md. Fokhrul Islam, Md. Taslim Reza (24 - 26 February 2022). "Design of a low cost Ultraviolet Disinfection unit to minimize the cross-contamination of COVID-19 in transport.", International Conference on Advancement in Electrical and Electronic Engineering (ICAEEE), Online (2022)

M. M. Nishat, M. A. Mahbub, A. Ahmed and M. A. Al Mamun, "Performance Assessment of Machine Learning Classifiers in Detecting Psychological Impact of Postgraduate Students due to COVID-19," 2021 6th IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE), pp. 1-6, 2021, IEEE, Kedah, Malaysia.

T. Hasan, M. M. Nishat, F. Faisal et al., "Exploring the Performances of Stacking Classifier in Predicting Patients Having Stroke," 2021 8th NAFOSTED Conference on Information and Computer Science (NICS), 2021, pp. 242-247, IEEE, Hanoi, Vietnam.

M. Rakibul Islam, A. N. M. Iftekher, M. S. Anzum, M. Rahman and S. Siraz, "LSPR Based Double Peak Double Plasmonic Layered Bent Core PCF-SPR Sensor for Ultra-Broadband Dual Peak Sensing," in IEEE Sensors Journal, vol. 22, no. 6, pp. 5628-5635, 15 March15, 2022, doi: 10.1109/JSEN.2022.3149715.

Ahnaf Akif Rahman, Fahim Faisal, Mirza Muntasir Nishat, Muntequa Imtiaz Siraji, Lamim Ibtisam Khalid, Md. Rezaul Hoque Khan, Md. Taslim Reza (8-10 Dec. 2021). “Detection of Epileptic Seizure from EEG Signal Data by Employing Machine Learning Algorithms with Hyperparameter Optimization.”, 4th International Conference on Bio-engineering for Smart Technologies (BioSMART), Online (2021).

Mohammad Rakibul Islam, Fahim Yasir, Md. Rakib Hossain Antor, Mahmudul Hassan Turja, Ashikur Rahman, Md. Rezaul Hoque Khan and Md. Taslim Reza, “An Eye-Shaped Ultra-Sensitive Localized Surface Plasmon Resonance–Based Biochemical Sensor”, Plasmonics, volume 17, pages 131–141, 2022. [SCIE indexed, JCR Impact Factor: 2.73].

Mohammad Rakibul Islam, Md. Moinul Islam Khan, Rahbar Al Rafid, Fariha Mehjabin, Md. Shahriar Rashid, Jubair Alam Chowdhury, Nausheen Zerin and Mohibul Islam, “Trigonal cluster-based ultra-sensitive surface plasmon resonance sensor for multipurpose sensing”, Sensing and Bio-Sensing Research, Volume 35, February 2022. [Scopus Q1 journal]

Sabiha Sharmin, Tasnim Zaman Adry, Md Farhad Hassan, Ehsanuzzaman Surid, and Rakibul Hasan Sagor. "Numerical Investigation of Nanodots Implanted High-Performance Plasmonic Refractive Index Sensor." Plasmonics (2022): 1-13.

H. U. Huzaibi, N. Lu, M. M. Billah, Di Geng and Ling Li, Investigation of Hump Behavior of Amorphous Indium-Gallium-Zinc-Oxide Thin-Film Transistor under Positive Bias Stress. IEEE Transactions on Electron Devices 69 (2), 549-554, 2022. [SCIE Q1 indexed, JCR Impact Factor: 2.917].

M. R. K. Shagor, A. J. Mahmud, M. M. Nishat, F. Faisal, M. H. Mithun and M. A. Khan, "Firefly Algorithm Based Optimized PID Controller for Stability Analysis of DC-DC SEPIC Converter," 2021 IEEE 12th Annual Ubiquitous Computing, Electronics & Mobile Communication Conference (UEMCON), December 1-4, 2021, pp. 0957-0963, IEEE Region-1, New York, USA.

A. Newaz, F. S. Haq and N. Ahmed, "A Case Study on Risk Prediction in Heart Failure Patients using Random Survival Forest," 2021 5th International Conference on Electrical Engineering and Information Communication Technology (ICEEICT), 2021, pp. 1-6, doi: 10.1109/ICEEICT53905.2021.9667933.

Islam, M.R., Iftekher, A.N.M., Noor, F. et al. AZO-coated plasmonic PCF nanosensor for blood constituent detection in near-infrared and visible spectrum. Appl. Phys. A 128, 86 (2022). [SCIE indexed, JCR Impact Factor: 2.584].

Mohammad Rakibul Islam, A. N. M. Iftekher, Fateha Noor, Md Rezaul Hoque Khan, Md. Taslim Reza, Mirza Muntasir Nishat “AZO Coated Plasmonic PCF Nanosensor for Blood Constituent Detection in Near Infrared and Visible Spectrum” in Applied Physics A, Springer

Infiter Tathfif, Md. Farhad Hassan, Kazi Sharmeen Rashid, Ahmad Azuad Yaseer, Rakibul Hasan Sagor, "A highly sensitive plasmonic refractive index sensor based on concentric triple ring resonator for cancer biomarker and chemical concentration detection," Optics Communications, Volume 519, 2022, 128429, ISSN 0030-4018, https://doi.org/10.1016/j.optcom.2022.128429

A. A. Rahman et al., "Detection of Mental State from EEG Signal Data: An Investigation with Machine Learning Classifiers," 2022 14th International Conference on Knowledge and Smart Technology (KST), 2022, pp. 152-156, doi: 10.1109/KST53302.2022.9729084.

Technical and Vocational Education

Al Mamun, M. A., Lawrie, G., & Wright, T. (2022). Exploration of learner-content interactions and learning approaches: The role of guided inquiry in the self-directed online environments. Computers & Education, 178, 104398. https://doi.org/10.1016/j.compedu.2021.104398

S. I. Shakeel, F.A. Haolader and M.A. Mamun (2022). Instructional design with ADDIE and rapid prototyping for blended learning: Validation and its acceptance in the context of TVET Bangladesh". In Education and Information Technologies (the official journal of the IFIP Technical Committee on Education) Publisher: Springer. December 2022. https://link.springer.com/article/10.1007/s10639-022-11471-0

Hasan, M., & Bhuiyan, M. S. (2022, 19-21 May). Unequal Access to TVET Programs at Technical Training Centers (TTC) in Bangladesh: TVET Administrators’ Perspectives 6th International Conference on Equity and Inclusive Education 2022, Dhaka, Bangladesh.

Abdou, B. O., Khan, M. S. H., & Hasan, M. (2022, 19-21 May). Empowering women through skills training on computer graphics design (CGD) during COVID-19 Pandemic: an in-depth investigation 6th International Conference on Equity and Inclusive Education 2022, Dhaka, Bangladesh.

Al Mamun, M. A. (2022). Fostering self-regulation and engaged exploration during the learner-content interaction process: the role of scaffolding in the online inquiry-based learning environment. Interactive Technology and Smart Education, 19(4), 482-509. https://doi.org/10.1108/ITSE-11-2021-0195

Al-Suraimi, A. S. M., & Hasan, M. (2022). Engineering students' perceptions of blended learning during COVID-19 pandemic: context of a developing country. International Journal of Smart Technology and Learning, 3(1), 67-87. https://doi.org/10.1504/IJSMARTTL.2022.128041

Salele, N., Khan, M. S. H., & Hasan, M. (2022). Electronic Engineering Students’ Misconceptions in Microwave Engineering, Paper presented at 5th Annual Paper Meet, organized by Electrical Engineering Division, The Institution of Engineering Division, Bangladesh, 28-29 October 2022, IEB, Dhaka, Bangladesh.

Shamim, M. R. H., al Mamun, M. A., & Raihan, Md. A. (2022). Mapping the Research of Technical Teachers ’ Pedagogical Beliefs about Science Technology Engineering and Mathematics (STEM) Education. International Journal of Instruction, 15(4), 797–818. https://www.e-iji.net/dosyalar/iji_2022_4_43.pdf

Salele, N., & Khan, M. S. H. (2022). Engineering trainee teachers' attitudes towards technology use in pedagogical practices: Extending Computer Attitude Scale (CAS) SAGE Open 12 (2), 1-14 (SSCI + Scopus Indexed): Impact Factor: 2.032

F.A. Haolader and S. S. Shimu. A Comparison of National Qualifications Frameworks and Recognition, Validation, and Accreditation Mechanism of Informal learning in VET among Selected Countries. Presented at the 4th International Conference of the German Research Center for Comparative Vocational Education and Training (G.R.E.A.T.) in Cologne, Germany held on 28-30 September 2022.

Hasan, M., Khan, M. S., Ahmed, A., Karim, A., Hossain, M. A., & Iqbal, A. (2022, 19-22 September). Variation theory in teaching and phenomenography in learning: What’s their impact when applied in engineering classrooms? The European Society for Engineering Education (SEFI) 50th Annual Conference, Barcelona, Spain.

Khan, M. S. H. & Markauskaite, L. (2022). Associations between TAFE teachers’ conceptions of, and approaches to, ICT-enhanced teaching and their conceptions of ICT use in the workplace, In Järvinen, HM., Silvestre, S., Llorens, SA., & Nagy, B. (Eds.), Towards a new future in engineering education, new scenarios that European alliances of tech universities open up SEFI 50th Annual Conference Universitat Politècnica de Catalunya · BarcelonaTech (UPC) 19 –22 September 2022 (pp. 2000–2006).

Hasan, M., Khan, M. S. H., Ahmed, A. K. M. F., Karim, A., Hossain, M.A., & Iqbal, A. K. M. P. (2022). Variation theory in teaching and Phenomenography in learning: What’s their impact when applied in engineering classrooms In Järvinen, HM., Silvestre, S., Llorens, SA., & Nagy, B. (Eds.), Towards a new future in engineering education, new scenarios that European alliances of tech universities open up SEFI 50th Annual Conference Universitat Politècnica de Catalunya · BarcelonaTech (UPC) 19 –22 September 2022 (pp. 1955–1960).

Al Mamun, M. A., Hossain, M. A., Salehin, S., Khan, M. S. H., & Hasan, M. (2022). Engineering students' readiness for online learning amidst the COVID-19 pandemic: Scale validation and lessons learned from a developing country. Journal of Educational Technology & Society 25 (3) https://www.j-ets.net/collection/forthcoming-articles/25_3; Impact Factor of 3.522

Shamim, M.R.H., Mamun, M.A.A., Raihan, M.A. (2022). Mapping the Research of Technical Teachers’ Pedagogical Beliefs about Science Technology Engineering and Mathematics (STEM) Education. International Journal of Instruction (IJI), Vol.15, No.4, p-ISSN: 1694-609X, SCImago & Scopus: Q2.

F.A. Haolader and S. H. Khan (2022). ‘Case Study: Bangladesh. The Demand Side of Environmental Sustainability Through Skills Recognition. In: M. Pavlova and M. Singh (Eds.) Recognizing Green Skills Through Non-formal Learning: A Comparative Study in Asia. Volume 5 of Education for Sustainability. Publisher: Springer Nature, 2022, ISBN 9811920729, 9789811920721. Aug 9, 2022.

Mubarak, H.R. & Khan, M. S. H. (2022) Variations in students' conceptions of good teaching in engineering education: a phenomenographic investigation, European Journal of Engineering Education, DOI: https://doi.org/10.1080/03043797.2022.2049216 (Emerging SCI, and Scopus indexed)

Khan, M. S. H., Uddin, M. H., Das, H. P., & Gregory, S. (2022). Towards ensuring quality in Technical and Vocational Education and Training (TVET) in Bangladesh: Achievement and Future Direction, Paper presented at 31st National Vocational Education and Training Research Conference, organize by NCVER, Wednesday 6 to Friday 8 July 2022. https://www.voced.edu.au/content/ngv%3A94329

Haolader, F.A, & Khan, M. S. H. (2022) Inclusion of Green Competences in the Recognition of Prior Learning: Current Practices in Bangladesh, In: M. Pavlova and M. Singh (Eds) Recognizing Green Skills in Non-formal Learning Settings - A Comparative Study in Asia, Springer International Publishing, Germany

Al Mamun, M. A., Hossain, M. A., Salehin, S., Khan, M. S. H., & Hasan, M. (2022). Engineering students’ readiness for online learning amidst the COVID-19 pandemic: Scale validation and lessons learned from a developing country. Educational Technology & Society, 25(3), 30–45. https://www.jstor.org/stable/48673722

Saidu, M. K., & al Mamun, M. A. (2022). Exploring the Factors Affecting Behavioural Intention to Use Google Classroom: University Teachers’ Perspectives in Bangladesh and Nigeria. TechTrends, 66(4), 681–696. https://doi.org/10.1007/s11528-022-00704-1

Khan, M. S. H., Zinnah, M. A., & et.al. (2022). Information and Communication Technology (ICT) Support toward Implementing Gender and Inclusive Pedagogies (GIP) Approach in the Secondary Education During COVID 19 and Beyond: A Case of Bangladesh, Paper presented at 6th International Conference on Equity and Inclusive Education, organize by Asian Centre for Inclusive Education (ACIE), 19-21 May, 2022, Dhaka, Bangladesh (Page 92-93).

Fahadi, M. & Khan, M. S. H. (2022). Technology-enhanced teaching in engineering education: Teachers' knowledge construction using TPACK Framework. International Journal of Instruction, 15 (2), 519-542.(Emerging SCI, and Scopus indexed)

Al Mamun, M. A., Azad, M. A. K., al Mamun, M. A., & Boyle, M. (2022). Review of flipped learning in engineering education: Scientific mapping and research horizon. Education and Information Technologies, 27(1), 1261–1286. https://doi.org/10.1007/s10639-021-10630-z

Abdou, B. O., Khan, M. S. H., & Hasan, M. (2022). Empowering women through skills training on computer graphics design (CGD) during COVID-19 Pandemic: an in-depth investigation, Paper presented at 6th International Conference on Equity and Inclusive Education, organize by Asian Centre for Inclusive Education (ACIE), 19-21 May, 2022, Dhaka, Bangladesh (Page 90-91)

Shahali, M., Khan, M. S. H., Zinnah, M. A., Mubarak, H.R. (2022) Students’ perception of mobile learning in Bangladesh: example from higher education, Int. J. of Smart Technology and Learning, 3 (1) Special Issue.

Rahman, A. A., Siraji, M. I., Khalid, L. I., Faisal, F., Nishat, M. M., Ahmed, A., & Al Mamun, M. A. (2022). Perceived Stress Analysis of Undergraduate Students during COVID-19: A Machine Learning Approach. 21st Mediterranean Electrotechnical Conference (MELECON), IEEE Xplore, 1129–1134. https://doi.org/10.1109/MELECON53508.2022.9843081

Al Mamun, M. A., Hossain, M. A., Salehin, S., Hossain Khan, M. S., & Hasan, M. (2022). Engineering Students’ Readiness for Online Learning Amidst the COVID-19 Pandemic: Scale Validation and Lessons Learned from a Developing Country. Educational Technology & Society, 25 (3), 30-45.

Computer Science and Engineering

Refaat Mohammad Alamgir, Ali Abir Shuvro, Mueeze Al Mushabbir, Mohammed Ashfaq Raiyan, Nusrat Jahan Rani, Md Rahman, Md Kabir, and Sabbir Ahmed, "Performance Analysis of YOLO-based Architectures for Vehicle Detection from Traffic Images in Bangladesh", 25𝑡ℎ ICCIT (2022), Cox’s Bazar, Bangladesh

S. Islam, F. Tabassum, S. Rizwan and T. M. Chowdhury, "Transfer Learning-based Ensemble Approach for Organ Classification: An Empirical Study," 2022 12th International Conference on Electrical and Computer Engineering (ICECE), Dhaka, Bangladesh, 2022, pp. 52-55, doi: 10.1109/ICECE57408.2022.10089089.

Md. Hamjajul Ashmafee, Tasnim Ahmed, Sabbir Ahmed, Md. Bakhtiar Hasan, Mst Nura Jahan, A.B.M. Ashikur Rahman, "An Efficient Transfer Learning-based Approach for Apple Leaf Disease Classification", 3𝑟𝑑 ECCE (2023), Chittagong, Bangladesh

Ahmed Nusayer Ashik, Md Saimul Haque Shanto, Rizwanul Haque Khan, Md. Hasanul Kabir, and Sabbir Ahmed, "Recognizing Bangladeshi Traffic Signs in the Wild", 25𝑡ℎ ICCIT (2022), Cox’s Bazar, Bangladesh

Akib Mohammed Khan, Alif Ashrafee, Reeshoon Sayera, Shahriar Ivan, and Sabbir Ahmed, "Rethinking Cooking State Recognition with Vision Transformers", 25𝑡ℎ ICCIT (2022), Cox’s Bazar, Bangladesh.

C. M. Abdullah, M. Kamal, F. Shaiara, A. R. M. Kamal, and M. A. Hossain, "Bloodcomm: A peerto-peer blockchain-based community for blood donation network", in 25th International Conference on Computer and Information Technology (ICCIT), IEEE, Cox's Bazar, Bangladesh, Dec. 2022

R. Jany, M. H. Ashmafee, I. Hussain, and M. A. Hossain, "Sleepexplain: Explainable non-rapid eye movement and rapid eye movement sleep stage classification from eeg signal", in 25th International Conference on Computer and Information Technology (ICCIT), IEEE, Cox's Bazar, Bangladesh, Dec. 2022

M. M. Rahman, S. Malik, M. S. Islam, M. A. Hossain, and A. R. M. Kamal, "An efficient approach to automatic tag prediction from movie plot synopses using transformer-based language model", in 25th International Conference on Computer and Information Technology (ICCIT), IEEE, Cox's Bazar, Bangladesh, Dec. 2022

M. R. Khan, S. M. N. Rahmatullah, I. M. Fuadul, A. R. M. Kamal, and M. A. Hossain, "Sentiment analysis of covid-19 vaccination in bangla language with code-mixed text from social media", in 12th International Conference on Electrical and Computer Engineering (ICECE), IEEE, Dhaka (BUET), Bangladesh, Dec. 2022

H. K. Rabib, M. Galib, T. M. Nobo, T. A. Sathi, M. S. Islam, A. R. M. Kamal, and M. A. Hossain, “"A gender-based cyberbullying detection for under-resourced bangla language", in 12th International Conference on Electrical and Computer Engineering (ICECE), IEEE, Dhaka (BUET), Bangladesh, Dec. 2022

An Efficient Approach to Automatic Tag Prediction from Movie Plot Synopses using Transformer based Language Model - To appear at the 25th International Conference on Computer and Information Technology (ICCIT)

R. M. Alamgir et al., "Performance Analysis of YOLO-based Architectures for Vehicle Detection from Traffic Images in Bangladesh," 2022 25th International Conference on Computer and Information Technology (ICCIT), Cox's Bazar, Bangladesh, 2022, pp. 982-987, doi: 10.1109/ICCIT57492.2022.10055758.

Md. Samin Morshed, Sabbir Ahmed, Tasnim Ahmed, Muhammad Usama Islam, and A. B. M. Rahman, "Fruit quality assessment with densely connected convolutional neural network", 12𝑡ℎ ICECE (2022), Dhaka, Bangladesh,

Minhaz Kamal, Fairuz Shaiara, Chowdhury Mohammad Abdullah, Sabbir Ahmed, Tasnim Ahmed, and Md. Hasanul Kabir, "Huruf: An Application for Arabic Handwritten Character Recognition Using Deep Learning", 25𝑡ℎ ICCIT (2022), Cox’s Bazar, Bangladesh.

Performance Analysis of YOLO-based Architectures for Vehicle Detection from Traffic Images in Bangladesh (ICCIT) [DOI: 10.1109/ICCIT57492.2022.10055758]

R.M. Alamgir, A.A. Shuvro, M. Al Mushabbir, M.A. Raiyan, N.J. Rani, M.M. Rahman, M.H. Kabir and S. Ahmed, "Performance Analysis of YOLO-based Architectures for Vehicle Detection from Traffic Images in Bangladesh," in International Conference on Computer and Information Technology (ICCIT), December 2022, pp. 982–987.

A. Ashik, M.S Shanto, R. Khan, M.H. Kabir and S. Ahmed, "Recognizing Bangladeshi Traffic Signs in the Wild," in International Conference on Computer and Information Technology (ICCIT), December 2022, pp. 1004–1009.

M.A. Toma, N.T. Promi, M.A. Pushpo and M.H. Kabir, "Blood Vessel Segmentation in Retinal Images Using Machine Learning Approach," in International Conference on Computer and Information Technology (ICCIT), December 2022, pp. 200–205.

F.T. Lisa, M.Z. Hossain, S.N. Mou, S. Ivan and M.H. Kabir, "Land Cover and Land Use Detection using Semi-Supervised Learning," in International Conference on Computer and Information Technology (ICCIT), December 2022, pp. 164–169.

M. Kamal, F. Shaiara, C.M. Abdullah, S. Ahmed, T. Ahmed and M.H. Kabir, "Huruf: An Application for Arabic Handwritten Character Recognition Using Deep Learning," in International Conference on Computer and Information Technology (ICCIT), December 2022pp. 1131–1136.

Ekram, S. M. S., Rahman, A. A., Altaf, M. S., Islam, M. S., Rahman, M. M., Rahman, M. M., ... & Kamal, A. R. M. (2022, December). BanglaRQA: A Benchmark Dataset for Under-resourced Bangla Language Reading Comprehension-based Question Answering with Diverse Question-Answer Types. In Findings of the Association for Computational Linguistics: EMNLP 2022 (pp. 2518-2532).

Islam, M. S., Hussain, I., Rahman, M. M., Park, S. J., & Hossain, M. A. (2022). Explainable Artificial Intelligence Model for Stroke Prediction Using EEG Signal. Sensors, 22(24), 9859.

Ratun Rahman, Md Rafid Islam, Akib Ahmed, Dr. Md. Kamrul Hasan, Dr. Hasan Mahmud, "A Study of Permission-based Malware Detection Using Machine Learning", The 15th IEEE International Conference on Security of Information and Networks, SINCONF 2022, Sousse, Tunisia, 11–13 November, 2022.

R. Rahman, M. R. Islam, A. Ahmed, M. K. Hasan and H. Mahmud, "A Study of Permission-based Malware Detection Using Machine Learning," 2022 15th International Conference on Security of Information and Networks (SIN), Sousse, Tunisia, 2022, pp. 01-06, doi: 10.1109/SIN56466.2022.9970528.

MD.Golam Rasul,Wasim Akram,Sayeda Fatema Tuj Zohura,Tanjila Alam Sathi,Lutfun Nahar Lota ,"Future Prediction for Nurse Care Activities using Deep Learning based Multi-Label Classification", at 4th International Conference on Activity and Behavior Computing,London,2022. Book chapter: Human Activity and Behavior Analysis. http://dx.doi.org/10.1201/9781003371540-26

S. M. S. Ekram, A. A. Rahman, M. S. Altaf, M. S. Islam, M. M. Rahman, M. M. Rahman, M. A. Hossain, and A. R. M. Kamal, "BanglaRQA: A benchmark dataset for under-resourced Bangla language reading comprehension-based question answering with diverse question-answer types", in Findings of the Association for Computational Linguistics: EMNLP 2022, Abu Dhabi, United Arab Emirates: Association for Computational Linguistics, Dec. 2022, 2518–2532, (A* Conference).

Mohammad Ridwan Kabir, Mohammad Anas Jawad, Mohaimin Ehsan, Hasan Mahmud, Md. Kamrul Hasan, "Renovo: Prototype of a Low-Cost Sensor-Based Therapeutic System for Upper Limb Rehabilitation", 17 October, 2022, https://doi.org/10.48550/arXiv.2109.03631

Mohammad Ridwan Kabir, Mohammad Ishrak Abedin, Rizvi Ahmed, Saad Bin Ashraf, Hasan Mahmud, Md. Kamrul Hasan, "Auxilio: A Sensor-Based Wireless Head-Mounted Mouse for People with Upper Limb Disability", 10 October, 2022, https://doi.org/10.48550/arXiv.2210.04483

A Case Study on the Independence of Speech Emotion Recognition in Bangla and English Languages using Language-Independent Prosodic Features (Under Review) Link: https://arxiv.org/abs/2111.10776

Mohsinul Kabir, Tasnim Ahmed, Md. Bakhtiar Hasan, Md Tahmid Rahman Laskar, Tarun Kumar Joarder, Hasan Mahmud, Kamrul Hasan. DEPTWEET: A typology for social media texts to detect depression severities. Computers in Human Behavior Volume 139, February 2023, 107503

I. J. Ratul, U.H. Wani, M. M. Nishat, A. Al-Monsur, A. M. Ar-Rafi, F. Faisal, M. R. Kabir, "Survival Prediction of Children Undergoing Hematopoietic Stem Cell Transplantation Using Different Machine Learning Classifiers by Performing Chi-Square Test and Hyperparameter Optimization: A Retrospective Analysis", Computational and Mathematical Methods in Medicine, vol. 2022, Article ID 9391136, 14 pages, 2022. https://doi.org/10.1155/2022/9391136

Nazmus Sakib, G. M. Shahariar, Md. Mohsinul Kabir, Md. Kamrul Hasan, Hasan Mahmud. "Assorted, Archetypal and Annotated Two Million (3A2M) Cooking Recipes Dataset based on Active Learning", International Conference on Machine Intelligence and Emerging Technologies (MIET), Noakhali Science and Technology University (NSTU), Sonapur, Noakhali, Bangladesh, 23-25 September 2022.

M. Kabir, T. Ahmed, M. B. Hasan, M. T. R. Laskar, T. K. Joarder, H. Mahmud and K. Hasan, "DEPTWEET: A typology for social media texts to detect depression severities" in Computers in Human Behavior, vol. 139, pp. 107503, 2022, doi: 10.1016/j.chb.2022.107503

A. B. M. Ashikur Rahman et al., "Two Decades of Bengali Handwritten Digit Recognition: A Survey," in IEEE Access, 2022, doi: 10.1109/ACCESS.2022.3202893.

ABM Ashikur Rahman, Md Bakhtiar Hasan, Sabbir Ahmed, Tasnim Ahmed, Md Hamjajul Ashmafee, Mohammad Ridwan Kabir, and Md Hasanul Kabir. "Two Decades of Bengali Handwritten Digit Recognition: A Survey." IEEE Access 10 (2022): 92597-92632.

A. B. M. A. Rahman, M. B. Hasan, S. Ahmed, T. Ahmed, M. H. Ashmafee, M. R. Kabir and M. H. Kabir, "Two Decades of Bengali Handwritten Digit Recognition: A Survey" in IEEE Access, vol. 10, pp. 92597-92632, 2022, doi: 10.1109/ACCESS.2022.3202893.

Ahmed, T., Ivan, S., Kabir, M. et al. Performance analysis of transformer-based architectures and their ensembles to detect trait-based cyberbullying. Soc. Netw. Anal. Min. 12, 99 (2022). https://doi.org/10.1007/s13278-022-00934-4

Tasnim Ahmed, Shahriar Ivan, Mohsinul Kabir, Hasan Mahmud, Md. Kamrul Hasan, "Performance analysis of transformer-based architectures and their ensembles to detect trait-based cyberbullying", Social Network Analysis and Mining (SNAM), 12, 99 (2022). https://doi.org/10.1007/s13278-022-00934-4 [Web of Science/ESCI/Scopus] [IF 2.8] [Q1: Communication in Social Science, Human-Computer Interaction, Information Systems]

Nazmus Sakib, G. M. Shahariar, Md. Mohsinul Kabir, Md. Kamrul Hasan, Hasan Mahmud. "Assorted, Archetypal and Annotated Two Million (3A2M) Cooking Recipes Dataset based on Active Learning". MIET 2022, Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering book series (LNICST,volume 491)

Tasnim Ahmed, Md. Mosinul Kabir, Shahriar Ivan, Hasan Mahmud and Md. Kamrul Hasan. "Performance Analysis of Transformer-based Architectures and Their Ensembles to Detect Trait-based Cyberbullying", Journal of Social Network Analysis and Mining, 2022

S. A. Sabab, M. R. Kabir, S. R. Hussain, H. Mahmud, H. A. Rubaiyeat and M. K. Hasan, "VIS-iTrack: Visual Intention Through Gaze Tracking Using Low-Cost Webcam," in IEEE Access, vol. 10, pp. 70779-70792, 2022, doi: 10.1109/ACCESS.2022.3187969.

Shahed Anzarus Sabab, Mohammad Ridwan Kabira, Sayed Rizban Hussaina, Hasan Mahmud, Md. Kamrul Hasan, Husne Ara Rubaiyeatf, "VIS-iTrack: Visual Intention through Gaze Tracking using Low-Cost Webcam", IEEE Access, 4 July 2022, IEEE, vol. 10, pp. 70779-70792, 2022, doi: 10.1109/ACCESS.2022.3187969. [SCIE/SSCI/Web of Science indexed, IF 3.9] [Q1: Computer Science]

S. Ahmed, M. B. Hasan, T. Ahmed, M. R. K. Sony and M. H. Kabir, "Less is More: Lighter and Faster Deep Neural Architecture for Tomato Leaf Disease Classification," in IEEE Access, vol. 10, pp. 68868-68884, 2022, doi: 10.1109/ACCESS.2022.3187203.

Sabbir Ahmed, Md Bakhtiar Hasan, Tasnim Ahmed, Md Redwan Karim Sony, and Md Hasanul Kabir. "Less is more: lighter and faster deep neural architecture for tomato leaf disease classification." IEEE Access 10 (2022): 68868-68884.

M. B. Hasan, T. Ahmed, S. Ahmed and M. H. Kabir, "GaitGCN++: Improving GCN-based Gait Recognition with Part-wise Attention and DropGraph" in Journal of King Saud University - Computer and Information Sciences, vol. 35(7), pp. 101641, 2023, doi: 10.1016/j.jksuci.2023.101641

Shahed Anzarus Sabab,Mohammad Ridwan Kabir,Sayed Rizban Hussain,Hasan Mahmud,Husne Ara Rubaiyeat,Md. Kamrul Hasan, "VIS-iTrack: Visual Intention through Gaze Tracking using Low-Cost Webcam", IEEE Access, 2022

Fardin Saad, Hasan Mahmud, Mohammad Ridwan Kabir, Md. Alamin Shaheen, Paresha Farastu, Md. Kamrul Hasan, "A Case Study on the Independence of Speech Emotion Recognition in Bangla and English Languages using Language-Independent Prosodic Features", 14 May 2022, https://doi.org/10.48550/arXiv.2111.10776

S. Farabi, H.H. Himel, F. Gazzali, M. B.Hasan, M.H. Kabir and M.Farazi, "Improving Action Quality Assessment using ResNets and Weighted Aggregation," in 10th Iberian Conference on Pattern Recognition and Image Analysis (IbPRIA), May 2022, pp. 576–587. DOI: 10.1007/978-3-031-04881-4_46

M. A. Hossain, S. Hwang, and J.-S. Kim, “Resource profiling and performance modeling for distributed scientific computing environments”, Applied Sciences, vol. 12, no. 9, 2022, issn: 2076-3417, (SCIE).

Farabi, S., Himel, H.H., Gazzali, F., Hasan, B., Kabir, M.H., and Farazi, M. Improving Action Quality Assessment using ResNets and Weighted Aggregation. 10th Iberian Conference on Pattern Recognition and Image Analysis

Farabi, S., Himel, H., Gazzali, F., Hasan, M.B., Kabir, M.H., Farazi, M. (2022). Improving Action Quality Assessment Using Weighted Aggregation. In: Pinho, A.J., Georgieva, P., Teixeira, L.F., Sánchez, J.A. (eds) Pattern Recognition and Image Analysis. IbPRIA 2022. Lecture Notes in Computer Science, vol 13256. Springer, Cham. https://doi.org/10.1007/978-3-031-04881-4_46

Abdullah Al Jobair, Suzad Mohammad, Zahin Raidah Maisha, Md. Jubair Ibna Mostafa, and Md. Nazmul Haque. “An empirical study on neophytes of stack overflow: How welcoming the community is towards them” in Proceedings of the 17th International Conference on Evaluation of Novel Approaches to Software Engineering, (ENASE), Online Streaming, April 25-26, pages 197–208, 2022. SciTePress

M. B. Hasan, T. Ahmed, M. H. Kabir, "HEATGait: Hop-Extracted Adjacency Technique in Graph Convolution based Gait Recognition," International Conference on Advances in Computer Technology, Information Science and Communications (CTISC), April 2022, pp. 1-6. doi: 10.1109/CTISC54888.2022.9849799

M. A. Alanezi, M. S. Shahriar, M. B. Hasan, S. Ahmed, Y. A. Sha’aban and H. R. E. H. Bouchekara, "Livestock Management With Unmanned Aerial Vehicles: A Review," in IEEE Access, vol. 10, pp. 45001-45028, 2022, doi: 10.1109/ACCESS.2022.3168295.

Mohammed A. Alanezi, Mohammad S. Shahriar, Md Bakhtiar Hasan, Sabbir Ahmed, Yusuf A. Sha’aban, and Houssem REH Bouchekara. "Livestock Management with Unmanned Aerial Vehicles: A Review." IEEE Access (2022).

I. Hussain, M. A. Hossain, R. Jany, M.-A. Bari, M. Uddin, A. R. M. Kamal, Y. Ku, and J.-S. Kim, “Quantitative evaluation of eeg-biomarkers for prediction of sleep stages”, Sensors, vol. 22, no. 8, 2022, issn: 1424-8220, (SCIE).

Mashrur M. Morshed, Ahmad Omar Ahsan, Hasan Mahmud, Md. Kamrul Hasan, Learning Audio Representations with MLPs, Proceedings of Machine Learning Research (PMLR): NeurIPS 2021 Competition Track. https://doi.org/10.48550/arXiv.2203.08490

Kushol, Rafsanjany, Abbas Masoumzadeh, Dong Huo, Sanjay Kalra, and Yee-Hong Yang. "Addformer: Alzheimer’s disease detection from structural mri using fusion transformer." In 2022 IEEE 19th International Symposium On Biomedical Imaging (ISBI), pp. 1-5. IEEE, 2022.

Mashrur M. Morshed, Ahmad Omar Ahsan, Hasan Mahmud, Md. Kamrul Hasan, Learning Audio Representations with MLPs, Proceedings of Machine Learning Research (PMLR): NeurIPS 2021 Competition Track, https://doi.org/10.48550/arXiv.2203.08490

Shahida Afrin, Hasan Mahmud, Md. Kamrul Hasan, "EMG-based hand gesture dataset to control electronic wheelchair for SCI patients", The International Con- ference on Computing Advancements (ICCA 2022), Association for Computing Machinery (ACM), New York, NY, USA, 10-12 March 2022

Shahida Afrin, Hasan Mahmud, Md. Kamrul Hasan, "EMG-based hand gesture dataset to control electronic wheelchair for SCI patients", The International Conference on Computing Advancements (ICCA 2022), Association for Computing Machinery (ACM), New York, NY, USA, 10-12 March 2022.

S. M. Rayeed, Gazi Wasif Akram, Sidratul Tamzida Tuba, Golam Sadman Zilani, Hasan Mahmud, and Md. Kamrul Hasan "Bangla sign digits recognition using depth information", Proc. SPIE 12084, Fourteenth International Conference on Machine Vision (ICMV 2021), 120840P (4 March 2022); https://doi.org/10.1117/12.2623400

Al Jobair, A.; Mohammad, S.; Maisha, Z.; Mostafa, M. and Haque, M. (2022). An Empirical Study on Neophytes of Stack Overflow: How Welcoming the Community is towards Them. In Proceedings of the 17th International Conference on Evaluation of Novel Approaches to Software Engineering, ISBN 978-989-758-568-5, ISSN 2184-4895, pages 197-208.

M. R. Kabir, M. I. Abedin, R. Ahmed, H. Mahmud and M. K. Hasan, "ANTASID: A Novel Temporal Adjustment to Shannon’s Index of Difficulty for Quantifying the Perceived Difficulty of Uncontrolled Pointing Tasks," in IEEE Access, vol. 10, pp. 21774-21786, 2022, doi: 10.1109/ACCESS.2022.3151696.

Mohammad Ridwan Kabir, Mohammad Ishrak Abedin, Rizvi Ahmed, Hasan Mahmud, Md. Kamrul Hasan, "ANTASID: A Novel Temporal Adjustment to Shannon’s Index of Difficulty for Quantifying the Perceived Difficulty of Uncontrolled Pointing Tasks", IEEE Access, 15 February 2022, IEEE, 10.1109/ACCESS.2022.3151696

Mohammad Ridwan Kabir, Mohammad Ishrak Abedin, Rizvi Ahmed, Hasan Mahmud, Md. Kamrul Hasan, "ANTASID: A Novel Temporal Adjustment to Shannon’s Index of Difficulty for Quantifying the Perceived Difficulty of Uncontrolled Pointing Tasks", IEEE Access, 15 February 2022, IEEE, 10.1109/ACCESS.2022.3151696 [SCIE/SSCI/Web of Science indexed, IF 3.9] [Q1: Computer Science]

ANTASID: A Novel Temporal Adjustment to Shannon’s Index of Difficulty for Quantifying the Perceived Difficulty of Uncontrolled Pointing Tasks

Tasnim Niger, Hasanur Rayhan, Kazi Asif Abdullah Noor, Dr. Kamrul Hasan. Framework for Behavioral Disorder Detection Using Machine Learning and Application of Virtual Cognitive Behavioral Therapy. Journal of Minerva Psychiatry.CoRR abs/2204.13900 (2022)

Tasnim Ahmed, Md. Mosinul Kabir, Shahriar Ivan, Hasan Mahmud and Md. Kamrul Hasan, "Am I Being Bullied on Social Media? An Ensemble Approach to Categorize Cyberbullying," 2021 IEEE International Conference on Big Data (Big Data), 2021, pp. 2442-2453, doi: 10.1109/BigData52589.2021.9671594.

Rahman R., Bin Azad Z., Bakhtiar Hasan M. (2022) Densely-Populated Traffic Detection Using YOLOv5 and Non-maximum Suppression Ensembling. In: Arefin M.S., Kaiser M.S., Bandyopadhyay A., Ahad M.A.R., Ray K. (eds) Proceedings of the International Conference on Big Data, IoT, and Machine Learning. Lecture Notes on Data Engineering and Communications Technologies, vol 95. Springer, Singapore. https://doi.org/10.1007/978-981-16-6636-0_43

Civil & Environmental Engineering

Karim, M. R., Khan, H. R. B., Ahsan, A., Rahadujjaman, M., Alam, S., Hasan, R., Sharif, T. T., & Farooq, S. (2022). Potential health hazard of drinking water in restaurants and tea stalls. Environmental Quality Management, 1– 11. https://doi.org/10.1002/tqem.21939

Badhon, F. A., Chowdhury, S. S., Haque, T., Rahman, S., Raihan, M. A., Hossain, M., & Mamun, Md. A. A. (2023). Risk Perception of Vehicle-to-Vehicle Vendors and General Pedestrians: A Comparative Study. Presented at 102nd Annual Meeting of the Transportation Research Board, Washington, D.C., 2023

S Gupta, AH Mahmood (2022), 'A multi-method investigation into rheological properties, hydration, and early-age strength of cement composites with admixtures recovered from inorganic and bio-based waste streams', Construction and Building Materials, 347, 128529.

Al-Nabhan, N. A., Noor, J., Salim, S. I.,Islam, N.,Toha, T., R., Quaium, A., Mostak, A., Hossain, M., Mushfiq, M., M., Islam, A. B. M. A. A., "Ranking Major Problems and Vulnerable Pilgrims in Hajj". Tourism Management. (Submitted)

Rahaman, M., Sakib, M., N., H.,Islam, N.,Islam, S., I., Kamal, U., Rasheed, R., and Islam, A. B. M. A. A., “Let's Vibrate with Vibration: Augmenting Structural Engineering with Low-Cost Vibration Sensing”. Engineering Structures. (Submitted)

Bhuiyan, M.R.H., Raihan, M.A., Hossain, M., 2022. Prioritizing Locations for Safety Improvements: An integrated Disutility Based Approach, in: ASCE International Conference on Transportation Development (ICTD). Washington DC. https://doi.org/10.1061/9780784484333.026

Mohammed, T.U., Bin Harun, M.Z. & Joy, J.A. Effect of sand-to-aggregate volume ratio on durability of concrete. Innov. Infrastruct. Solut. 7, 318 (2022). https://doi.org/10.1007/s41062-022-00915-8

Chowdhury, T.; Rifaat, S.M.; Tay, R. Characteristics of Pedestrians in Bangladesh Who Did Not Receive Public Education on Road Safety. Sustainability 2022, 14, 9909. https://doi.org/10.3390/su14169909 (Scopus and Web of Science Indexed Journal)

Ahmed, S., Kamal, U., Toha, T. R.,Islam, N.,and Islam, A. B. M. A. A., “Predicting Human Count through Environmental Sensing in Closed Indoor Settings”, 15th EAI International Conference on Mobile and Ubiquitous Systems: Computing, Networking and Services, November, 2018, New York City, United States.

Ahmed, S., Uddin, M. S., Feroz, S. I., Alam, M. R. B., Farabi, F. A., Uddin, M. M., Rifaat, S. M. (2021). Tendency of Intra-City Bus Drivers to Use Cell Phone While Driving Using Ordered Probit Mode. Paper presented in 8 th Brunei International Conference on Engineering and Technology 2021 (BICET 2021), hosted by the Universiti Teknologi Brunei, Brunei Darussalam from 8 -10 November 2021.

Alim, M. A., Mamun, S. A. and Rifaat, S. M. (2021). Reassessing Road Sign Test of Bus Drivers in Dhaka City, Bangladesh. Paper presented in 3rd Annual Bridging Transportation Researchers Conference Program, August 5 & August 6 held in online platform, https://bridgingtransport.org/

AH Mahmood, M Babaee, SJ Foster, A Castel (2022), ' Capturing the early-age physicochemical transformations of alkali-activated fly ash and slag using ultrasonic pulse velocity technique', Cement and Concrete Composites, 130, 104529.

AH Mahmood, S Afroz, A Kashani, T Kim, SJ Foster (2022), 'The efficiency of recycled glass powder in mitigating the alkali-silica reaction induced by recycled glass aggregate in cementitious mortars', Materials & Structures, 55 (156).

Kabir, M.I.; Wong, L.; Wang, J.; Yang, C.; and Zhang, Y.X.; 'Low growth damage assessment of bonded metal-composite joint using a numerical approach', International Journal of Applied Mechanics, 2022. DOI: https://doi.org/10.114/S175882512250082X

Islam, N., Toha, T. R., Islam, M. M., and Ahmed, T., “The association between particulate matter concentration and meteorological parameters in Dhaka, Bangladesh”. Meteorology and Atmospheric Physics, 134(4), 1-13

S Saleh, Y-L Li, E Hamed, A Mahmood, X-L Zhao (2022), 'Workability, strength, and shrinkage of ultra-high-performance seawater, sea sand concrete with different OPC replacement ratios', Journal of Sustainable Cement-Based Materials, 1-21.

Emran N.Y.Y., Ahsan A., Ebrahim H.H. Al-Qadami, M.M. El-Sergany, M. Shafiquzzaman, M. Imteaz, A.W.M Ng, M.A.U.R. Tariq, S. Idrus, Z. Mustaffa, F.Y. Teo. (2022). Efficiency of a triangular solar still integrated with external PVC pipe solar heater and internal separated condenser, Sustainable Energy Technologies and Assessments, Volume 52, Part C, 102258, pp. 1-12. IF = 5.3. Elsevier, ISSN 2213-1388. (SCI) https://doi.org/10.1016/j.seta.2022.102258

Imteaz, M.A., Bayatvarkeshi, M. & Ahsan, A. (2022). Modelling Metribuzin removal efficiency through adsorption using activated carbon of olive-waste cake. Water, Air, & Soil Pollution, 233(115):1-9. IF = 2.5. Springer (ISSN 0049-6979). (SCI) https://doi.org/10.1007/s11270-022-05592-y

Das SK, Ahsan A, Khan MH, Tariq MA, Muttil N, Ng AW. (2022). Impacts of Climate Alteration on the Hydrology of the Yarra River Catchment, Australia Using GCMs and SWAT Model. Water, 14(3):445; 1-17. IF=3.1, Q2 (ISSN: 2073-4441). (SCI) https://doi.org/10.3390/w14030445

Imteaz MA, Abdullah Y, Ahsan A. (2022). Climatic and spatial variations in seasonality index of rainfall pattern for major Australian cities. International Journal of Hydrology Science and Technology, 14(1):14-26. Inderscience (ISSN 2042-7808) (Scopus) https://doi.org/10.1504/IJHST.2021.10035033 (In press)

Imteaz, MA, Hossain ABMS, Ahsan A. (2022). Data-driven modelling of bioethanol fuel production from rambutan fruit waste, Proceedings of the Institution of Civil Engineers - Waste and Resource Management, Paper 2100041, pp. 1-7. ICE, UK (ISSN 1747-6526) (Scopus) https://doi.org/10.1680/jwarm.21.00041

Tabassum, F.; Imtiaz F.; Alam, J. & Alam, T. (2022) "RISK ASSESMENT OF SINKHOLE OCCURRENCE IN BANGLADESH BY ANALYZING TRIGGER FACTORS OF SOUTH ASIAN SINKHOLE COLLAPSE INCIDENTS WITH SUGGESTIONS FOR POSSIBLE PREVENTIVE MEASURES." Proceedings of the 6th International Conference on Civil Engineering for Sustainable Development (ICCESD 2022), 10~12 February 2022, KUET, Khulna, Bangladesh (ISBN-978-984-35-1972-6). http://iccesd.com/proc_2022/Papers/GTE-4314.pdf

Das, S. K., Ahsan, A., Khan, M. H.R.B., Tariq, M. A. U. R., Muttil, N., & Ng, A. W. (2022). Impacts of Climate Alteration on the Hydrology of the Yarra River Catchment, Australia Using GCMs and SWAT Model. Water, 14(3), 445.

Bhuiyan, M. R. H., Nokshi, K. N., Chowdhury, M. R. I., Raihan, M. A., & Hossain, M. M. (2022). Factors Affecting the Safety Perception of Helmet and Seat Belt Use: A Bayesian Network Approach. 101st Annual Meeting of Transportation Research Board, 18p. https://annualmeeting.mytrb.org/OnlineProgram/Details/17236

H. M. Shahin, S. Sadia, M. Farzana, R. N.K. Broti and M. S. Islam (2022): Settlement Analysis of Field Monitoring Data at Kanchpur Bridge, Bangladesh, Proceedings of the 7th World Congress on Civil, Structural, and Environmental Engineering (CSEE'22), Lisbon, Portugal, April.

H. M. Shahin (2022): Soil Characteristics of Padma Multipurpose Bridge, MIST International Journal of Science and Technology. Vol.10, pp. 33- 41.

H. M. Shahin, M. U. Kabir and S, Islam (2022): Seismic Hazard Analysis at Site Specific Condition: Case Study in Araihazar, Bangladesh. IUT Journal of Engineering and Technology (JET), Vol. 14, No. 1, December.

M. R. Irtiza, S. Sakib, I. Alam, F. Abrar, and H. M. Shahin, (2022): Effects of groundwater levels on tunnel lining of Dhaka Subway, Proceedings of the 5th Annual Paper Meet and 2nd Civil Engineering Congress, Dhaka, Bangladesh, July.

T. Nakai, H. M. Shahin, and H. Takahashi, (2022): Implicit calculation algorithm of Subloading tij model (part 3), Proc. of the 45th Japan national conference on geotechnical engineering, Nigata, Japan, August.

S. R. Sabab, M. M. Bondhon, M. E. Kabir, N. Shuvo, and H. M. Shahin (2022): Correlation of SPT-N and fine content with angle of internal friction in the context of Dhaka city – a machine learning approach, Proceedings of the 5th Annual Paper Meet and 2nd Civil Engineering Congress, Dhaka, Bangladesh, July.

Business and Technology Management

Mumu, J. R.; Connolly, R.; McParland, C.; and Azad, M. A. K. (2022) "Understanding Barriers to Female STEM Students’ Adoption of Online Learning During A Pandemic: An fsQCA Analysis," Pacific Asia Journal of the Association for Information Systems: Vol. 14, No. 6, 65-87. https://doi.org/10.17705/1pais.14603 [Indexed in ESCI, Scopus, ABDC in B, CABS in level 2].

Hossain, M.N., Hossain, M.Y., Bao, Y., Kumar, N. and Hoque, M.R. (2022), "A proposed model to design MOOCs through the lens of addressing graduate skill gap", Higher Education, Skills and Work-Based Learning, Vol. 12 No. 5, pp. 963-982. ESCI, Scopus (Q1), ABDC, CABS. https://doi.org/10.1108/HESWBL-04-2021-0070

Uddin, M.S., Fintech in credit risk prediction: an application of alternative machine learning approach, Socially Responsible Information Systems for Sustainable Societies, The 5th MENA Conference on Information Systems (MENACIS), Dhahran, Kingdom of Saudi Arabia, November 17-19, 2022

Khanom, K., Islam, M.T., Hasan, A.A.T., Sumon, S.M. and Bhuiyan, M.R.I., 2022. Worker satisfaction in health, hygiene and safety measures undertaken by the Readymade garments industry of Bangladesh: A case study on Gazipur. Journal of Business Studies, 3(1), pp.93-105.

Khayer, A., Talukder, M. S., Bao, Y., & Hossain, M. N. (2023). Application-based mobile payment systems: continuance intention and intention to recommend. International Journal of Mobile Communications, 21(1), 19-53. SSCI (Q1), Scopus (Q1).

Saif, A. N. M., Islam, K. A., Haque, A., Akhter, H., Rahman, S. M., Jafrin, N., ... & Mostafa, R. (2022). Blockchain Implementation Challenges in Developing Countries: An evidence-based systematic review and bibliometric analysis. Technology Innovation Management Review, 12(1/2).

Tahmid, T., Hoque, M. N., Said, J., Saona, P., & Azad, M. A. K. (2022). Does ESG initiatives yield greater firm value and performance? New evidence from European firms. Cogent Business & Management, 9(1), 2144098.

Akther, N., Mamun, M.A.A., Azad, M., Kalam, A., & Sorwar, G. (2022). Review of Human Resource Management (HRM) Literature: A bibliometric Analysis (1981-2019). DLSU Business & Economics Review, 32(1).[Indexed in Scopus]

Faruk, M., Hossain Sarker, Mamun, M. A.A., Hasan, S. (2022). Adoption of big data analytics in marketing: an analysis in Bangladesh. Journal of Data, Information and Management, 4(3-4), 277-290

Bai, X., Hossain, M. N., Kumar, N., & Hossain, M. Y. (2022). Effect of perceived fear, quality, and self-determination on learners’ retention intention on MOOCs. Psychology Research and Behavior Management, 2843-2857. SSCI (Q1), Scopus (Q1).

Kumar N, Liu Z, Flinchbaugh C, Hossain MY, Hossain MN (2022) Impact of emotional labour on taking charge to predict employee’s creative and task performance: The moderation of performance-based pay from the lens of self-determination theory. PLoS ONE 17(10): e0269196. SCI (Q1), Scopus(Q1). https://doi.org/10.1371/journal.pone.0269196

Akther, N., Mamun, M.A.A., Azad, M.A.K., Sorwar, G. (2022) Review of Human Resource Management (HRM) Literature: A bibliometric Analysis (1981-2019). DLSU Business and Economics Review 32(1), pp. 176–190.

Uddin, M.S., Chi, G., Al Janabi, M. A. M., Habib, T., Yuan, K. (2022). Modeling Credit Risk with a Multi-Stage Hybrid Model: an Alternative Statistical Approach. Journal of Forecasting (SSCI, Q2, IF-1.57, ABS-2*, ABDC-A). (Doi: 10.1002/for.2860).

Wanke, P., Hassan, M.K., Azad, M.A.K. et al. (2022), “Application of a distributed verification in Islamic microfinance institutions: a sustainable model”. Financial Innovation, 8, 40-80. https://doi.org/10.1186/s40854-022-00384-z

Mehzabin, S., Shahriar, A., Hoque, M.N., Wanke, P. and Azad, M.A.K. (2022), "The effect of capital structure, operating efficiency and non-interest income on bank profitability: new evidence from Asia", Asian Journal of Economics and Banking, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/AJEB-03-2022-0036

Wanke, P., Hassan, M.K., Azad, M.A.K., Rahman, M.A., & Akther, N. (2022), Application of a Distributed Verification in Islamic Microfinance Institutions: A Sustainable Model. Journal of Financial Innovation, Volume 8, article number 80. Springer.

Hossain M.N., Social Media and Academic Performance: The impact of Zoom application on University Education (2022). Journal of Army Institute of Business Administration (AIBA, Savar), Army Printing Press, Vo.03, Issue 1, ISSN: 27087069.

Impact of Executive Remuneration and Firm Leverage on Firm Stability: Lessons from European Firms (2022). Journal of Asian Business Strategy, 12(1), 1–9.

M. Safiullah, T. Akhter, P. Saona Azad, M.A.K. (2022) Gender diversity on corporate boards, firm performance, and risk-taking: New evidence from Spain. Journal of Behavioral and Experimental Finance, doi: https://doi.org/10.1016/j.jbef.2022.100721.

Rupa, R. A., & Saif, A. N. M. (2022). Impact of green supply chain management (GSCM) on business performance and environmental sustainability: case of a developing country. Business Perspectives and Research, 10(1), 140-163.

Impact of Board Diversity on Firms’ Stability: A Study on European Firms (2022). Asian Journal of Empirical Research, 12(1), 29–34.

2021 (233)

F Sharmin and M A Basith, “Facile synthesis of Gadolinium-doped BiFeO3 nanoparticles for highly efficient photocatalytic degradation towards methylene blue and levofloxacin”, presented (poster) at the Catalysis Science & Technology 10th Anniversary Symposium, United Kingdom, 16-17 November 2021.

M Noor, F Sharmin, M Al Mamun, S Hasan, M A Hakim, and M A Basith, “Effect of Gd and Y co-doping in BiVO4 photocatalyst for enhanced degradation of methylene blue dye”, J. Alloys Compd., vol. 895, p. 162639, 2021

F Sharmin, F Ara, M D I Bhuyan, S Das, T Satu, T Komeda and M A Basith, “Tunable Exchange bias in Nd2FeCrO6 double perovskite”, presented (oral) at the National Conference on Physics, Dhaka, Bangladesh, 6-7 August 2021

Mechanical and Production Engineering

M S Hossain, S Shajid, M R Karim, Numerical investigation to assess the techno-economic feasibility of solar central receiver system for off-grid power in Saint Martin's Island, Bangladesh, Energy for Sustainable Development, Elsevier. Volume 65, December 2021, Pages 63-76. DOI: https://doi.org/10.1016/j.esd.2021.09.008 (Impact Factor: 5.5, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Mohammad Masrur Hossain, Niyaz Afnan Ahmed, Md Abid Shahriyar, M Monjurul Ehsan, Fahid Riaz, Sayedus Salehin, Chaudhary Awais Salman, "Analysis and optimization of a modified Kalina cycle system for low-grade heat utilization", Energy Conversion and Management: X, Vol 12, pp: 100121, Elsevier (October 2021) [https://www.sciencedirect.com/science/article/pii/S2590174521000465]

Md. Anayet U. Patwari, Mohammad Ahsan Habib, Md. Saiful Islam, Md. Sayeed Ul Hasan [2021] “Development of a thermo-acoustic device for the conversion of sound waves into cold air” ACTA Technical Corviniensis, Volume XIV, issue 1, pp 57-60.

M F Diba, M R Karim, J Naser, CFD modelling of coal gasification in a fluidized bed with the effects of calcination under different operating conditions, Energy, Elsevier. Volume 239, Part C, 15 January 2022, 122284. DOI: https://doi.org/10.1016/j.energy.2021.122284 (Impact Factor: 9.0, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Hasan, Z., Urmee, S. A. Examining the need to synchronize human resource quality with intelligent systems and machines in Industry 4.0. Quality Progress. 54 (0). 28-37. Available at: https://asq.org/quality-progress/articles/cutting-into-a-skills-deficit?id=ebaf77464ab5429898f176fa240d63aa

M. Nasim, U. Galvanetto, Mechanical characterisation of additively manufactured PA12 lattice structures under quasi-static compression, Materials Today Communications; 29: 102902 (2021), doi.org/10.1016/j.mtcomm.2021.102902.

Md Azazul Haque, Md. Abdul Karim Miah, Shorab Hossain, ‪M. Hamidur Rahman, "Passive cooling configurations for enhancing the photovoltaic efficiency in hot climatic conditions" published in the Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation, an ASME transactions, Feb 2022, 144(1): 011009 (9 pages), Paper No: SOL-21-1091, https://doi.org/10.1115/1.4052062.

Awais, Muhammad; Hasan, Reaz; Rahman, Md. Hamidur, "Effect of blowing ratio on Film-Cooling effectiveness of Ginkgo Shaped Holes: A numerical approach", published in Transaction of Canadian Society of Mechanical Engineering, DOI: 10.1139/tcsme-2021-0014.

Adib Adnan, Shadman Mahmud, Mohammed Raihan Uddin, Anish Modi, M. Monjurul Ehsan, Sayedus Salehin, "Energy, Exergy, Exergoeconomic, and environmental (4E) analyses of thermal power plants for municipal solid waste to energy application in Bangladesh", Waste Management, Vol 134, pp 136-148 (August 2021) [https://www.sciencedirect.com/science/article/pii/S0956053X21004311]

Sayedus Salehin, Sheikh Nazrul Islam, Syed Rafat Faysal, Saiful Huque, Md. Nazrul Islam Khan, Musfequs Salehin, Ifat Rabbil Qudrat Ovi, AKM Sadrul Islam, “Heat Retention Cookers for Energy Saving and Extended Shelf Life with Better Nutrient Preservation”, (Pre-print) SSRN (July 2021) [https://ssrn.com/abstract=3895679]

Mohammed Raihan Uddin, Shadman Mahmud, Sayedus Salehin, Md Abdul Aziz Bhuiyan, Fahid Riaz, Anish Modi, Chaudhary Awais Salman, "Energy analysis of a solar driven vaccine refrigerator using environment-friendly refrigerants for off-grid locations", Energy Conversion and Management: X, Vol 11, pp: 100095, Elsevier (July 2021) [https://www.sciencedirect.com/science/article/pii/S2590174521000209]

M.F.Karim, Sumona Huq, A. K. Azad, M.S.R.Chowdhury, M.M.Rahman; "Numerical Analysis of Thermofluids inside a Porous Enclosure with Partially Heated Wall", International Journal of Thermofluids, Elsevier, Volume 11, August 2021, 100099, https://doi.org/10.1016/j.ijft.2021.100099

Muhammad Awais, Arafat A. Bhuiyan, Sayedus Salehin, Mohammad Monjurul Ehsan, Basit Khan, Md. Hamidur Rahman, Synthesis, heat transport mechanisms and thermophysical properties of nanofluids: A critical overview, International Journal of Thermofluids, pp. 100086, 2021/05/09/, 2021

Md Abdullah Al Mamun, Md Akbar Hossain, Sayedus Salehin, Md Shahadat Hossain Khan, Mahbub Hasan, "Engineering students’ readiness for online learning amidst the COVID-19 pandemic: Scale validation and lessons learned from a developing country", (Pre-print) Research Square (April 2021) [https://doi.org/10.21203/rs.3.rs-374991/v1]

M. Nasim, A. Cernicchi, U. Galvanetto, Development of a finite element neck model for head-first compressive impacts: toward the assessment of motorcycle neck protective equipment, IMechE H: Journal of Engineering in Medicine; 235 (9): 1001-1013 (2021). doi.org/10.1177/09544119211018112

Muhammad Awais, Arafat A. Bhuiyan, Sayedus Salehin, Mohammad Monjurul Ehsan, Basit Khan, Md. Hamidur Rahman, "Synthesis, heat transport mechanisms and thermophysical properties of nanofluids: A critical overview", International Journal of Thermofluids, Vol 10, pp: 100086, Elsevier (March 2021) [https://www.sciencedirect.com/science/article/pii/S2666202721000240]

M. M. Roshid, M. F. Karim, A. K. Azad, M. M. Rahman, and Tahmina Sultana; "New solitonic and rogue wave solutions of a Klein-Gordon equation with quadratic nonlinearity", Partial Differential Equations in Applied Mathematics, Elsevier. Volume 3, June 2021, 100036. https://doi.org/10.1016/j.padiff.2021.100036

Muhammad Awais, Arafat A.Bhuiyan, SayedusSalehin, Mohammad Monjurul Ehsan, Basit Khan and Md Hamidur Rahman, "Synthesis, heat transport mechanisms and thermophysical properties of nanofluids: A critical overview", published in International Journal of Thermofluids 10(4), March 2021, DOI: 10.1016/j.ijft.2021.100086

A. R. Sarhan, M.R. Karim, Jamal. Naser, Bubble Column CFD Model with Effects of Forced Oscillations on bubble dynamics, Chemical Engineering and Technology, (2021). Volume 44, Issue 6, June 2021, Pages 1111-1120. DOI: https://doi.org/10.1002/ceat.202000533 (Impact Factor: 2.1, Q2 Ranked, ISI/Scopus Indexed Journal)

F. Ahmed, M. A. Abir, A. S. M. Redwan, Arafat A. Bhuiyan, and A. S. Mollah, The impact of D-shaped jaggedness on heat transfer enhancement technique using Al2O3 based nanoparticles, International Journal of Thermofluids, pp. 100069, 2021/02/09/, 2021

Thin Films of Oxa[9]helicene Derivatives and Their Photoelectrochemical Properties, Md Jalil Miah, Mohammad Shahabuddin, Md. Nazmul Kayes, Michinori Karikomi, Eri Nasuno, Norihiro Kato, Ken-ichi Iimura; The 34th Annual Meeting on Photochemistry of Solids and Surfaces, 03–04 December 2015, Utsunomiya University,Tochigi, Japan.

Study of Thin Films of Oxa[9]helicene Derivatives and Explore Their Photoelectrochemical Properties, Md Jalil Miah , Mohammad Shahabuddin , Mohammad Salim, Md. Nazmul Kayes, Michinori Karikomi, Eri Nasuno, Norihiro Kato, Ken-ichi Iimura; 25th Annual Meeting of MRS-Japan 2015, 08–10 December 2015, Yokohama, Japan.

Synthesis, Preparation and Characterization of the Films of Oxa [9] Helicene Derivatives and Evolution of Optoelectronic Properties, Md Jalil Miah, Mohammad Shahabuddin, Mohammad Salim, Md. Mufazzal Hossain, Michinori Karikomi, Eri Nasuno, Norihiro Kato, Ken-ichi Iimura; 16th Asain Chemical Congress, 2016, March, 16-19.

Structural Characterization of Thin Films of Oxa[9]helicene Derivatives Prepared by Langmuir Technique and Spin Coating Method, Md Jalil Miah, Mohammad Shahabuddin, Md. Nazmul Kayes, Mochinori Karikomi, Eri Nasuno, Norihiro Kato, Ken-ichi Iimura; The 67th Divisional Meeting on Colloid & Interface Chemistry, Division of Colloid and Surface Chemistry. Hokkaido University of Education, Asahikawa Campus, 2016, September, 22-24.

Preparation and Characterization of Thin Films of an Axially Chiral Bibenzo[c]Phenanthrene Diol, Md. Nazmul Kayes, Md Jalil Miah, Mohammad Shahabuddin, Mochinori Karikomi, Eri Nasuno, Norihiro Kato, Ken-ichi Iimura; The 67th Divisional Meeting on Colloid & Interface Chemistry, Division of Colloid and Surface Chemistry. Hokkaido University of Education, Asahikawa Campus, 2016, September, 22-24.

Thin films of an axially chiral bibenzo[c]phenanthrene diol and its enantiomers: Film structure, optical property, and photoelectrochemical response, Colloids and Surfaces A: Physicochemical and Engineering Aspects, , Md. Nazmul Kayes, Mohammad Shahabuddin, Md Jalil Miah, Michinori Karikomi, Sachio Yoshihara, Eri Nasuno, Norihiro Kato, Ken-ichi Iimura, 2018, 538, 155-163.

Sayedus Salehin, Syed Shaheer Uddin Ahmed, Md. Ehasanul Hoque, M Salahuddin Mrigdad, SM Ashef Hussain, SM Tahsin Intisar, “Assessment of biogas generation potential from slaughterhouse wastes in Dhaka city, Bangladesh”, Waste Disposal & Sustainable Energy, Vol. 3 (1), pp 41–48, Springer (January 2021) [https://link.springer.com/article/10.1007/s42768-020-00061-w]

Shadman Mahmud, Adib Adnan, Shahnoor Shamim Khan, and Md. Hamidur Rahman, "Study of Incident Drag Response of Hyperloop Pod Based on Change in Aerodynamic Brake Plate Orientation" published in the Transaction of Canadian Society for Mechanical Engineering. https://doi.org/10.1139/tcsme-2020-0038

Muhammad Awais, Najeeb Ullah, Javaid Ahmad, Faizan Sikandar, Mohammad Monjurul Ehsan, Sayedus Salehin, Arafat Ahmed Bhuiyan, “Heat transfer and pressure drop performance of Nanofluid: A state-of- the-art review", International Journal of Thermofluids, Vol 9, pp: 100065, Elsevier (January 2021) [https://www.sciencedirect.com/science/article/pii/S2666202721000033]

Awais M, N Ullah, J Ahmad, F Sikandar, MM Ehsan, S Salehin, Bhuiyan AA, Heat transfer and pressure drop performance of nanofluid: The state of the art review. International Journal of Thermofluds, Elsevier, 2021: p. 100065.

M. Awais, N. Ullah, J. Ahmad, F. Sikandar, M. M. Ehsan, S. Salehin, and Arafat A. Bhuiyan, Heat transfer and pressure drop performance of Nanofluid: A state-of- the-art review, International Journal of Thermofluids, pp. 100065, 2021/01/16/, 2021.

Iqbal, M., Dipu, M., Masfiq, M. & Rashid, A., Investigation to identify the causes of low back pains among garment workers of a selected garment factory in Bangladesh, Advances in Materials and Processing Technologies, 8:3, 3281-3296, 2022 DOI: 10.1080/2374068X.2021.1948699

Jamaludin, Z., Puveneswaran, P., Chiew, T.H., Maharof, M., 2021. Design and Application of ST-SMC Controller for Position Control of a Milling Table. Intelligent Manufacturing and Mechatronics: Proceedings of SympoSIMM, pp. 236-246, 2022, Springer.

Rafan, N.A., Jamaludin, Z., Chiew, T.H., Maharof, M., 2020. Nonlinear Friction Analysis of a Modified Switching Function Controller in Pre-sliding Regime. Advances in Material Sciences and Engineering, 309-318.

Electrical and Electronic Engineering

Islam, M.R., Iftekher, A.N.M., Noor, F., Khan, M.R.H., Reza, M.T, Nishat, M.,M., AZO-coated plasmonic PCF nanosensor for blood constituent detection in near-infrared and visible spectrum. Appl. Phys. A 128, 86 [SCIE, IF: 2.5]

M. S. Rahman, M. M. Haque, Z. K. Eisham, M. T. Kawser, M. R. Akram and S. Z. Rahman, "An Adaptive Grey Wolf Optimization Algorithm for Secrecy Rate Optimization in Interference Limited Wireless Networks," 2021 IEEE International Conference on Telecommunications and Photonics (ICTP), 2021, pp. 1-5, doi: 10.1109/ICTP53732.2021.9744155.

M. S. Rahman, M. M. Haque, Z. K. Eisham, Mohammad T. Kawser, M. R. Akram and S. Z. Rahman, “An Adaptive Grey Wolf Optimization Algorithm for Secrecy Rate Optimization in Interference Limited Wireless Networks”, IEEE International Conference on Telecommunications and Photonics (ICTP), Dhaka, Bangladesh, pp. 1-5, December 22-24, 2021. DOI: 10.1109/ICTP53732.2021.9744155.

J. Y. Kim, M. M. Billah, H. Kim, M. H. Rabbi, S. S. Urmi, S. Lee, and J. Jang, Ultra-Low Power, Emission Gate Driver with Pulse Width Modulation Using Low-Temperature Poly-Si Oxide Thin-Film Transistors. IEEE Electron Device Letters 43 (2), 236 - 239, 2021. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

Islam, Q.N.U., Ahmed, A. and Abdullah, S.M., 2021. Optimized controller design for islanded microgrid using non-dominated sorting whale optimization algorithm (NSWOA). Ain Shams Engineering Journal, 12(4), pp.3677-3689.

A. A. Rahman, L. I. Khalid, M. I. Siraji, M. M. Nishat, F. Faisal and A. Ahmed, "Enhancing the Performance of Machine Learning Classifiers by Hyperparameter Optimization in Detecting Anxiety Levels of Online Gamers," 2021 24th International Conference on Computer and Information Technology (ICCIT), 2021, pp. 1-5, doi: 10.1109/ICCIT54785.2021.9689911.

A. A. Rahman, L. I. Khalid, M. I. Siraji, M. M. Nishat, F. Faisal and A. Ahmed, "Enhancing the Performance of Machine Learning Classifiers by Hyperparameter Optimization in Detecting Anxiety Levels of Online Gamers," 2021 24th International Conference on Computer and Information Technology (ICCIT), 2021, pp. 1-5, IEEE.

A. A. Rahman, F. Faisal, M M Nishat et al., "Detection of Epileptic Seizure from EEG Signal Data by Employing Machine Learning Algorithms with Hyperparameter Optimization," 2021 4th International Conference on Bio-Engineering for Smart Technologies (BioSMART), 2021, pp. 1-4, IEEE, Paris, France

Nishat, Mirza Muntasir, Fahim Faisal, Tasnimul Hasan, Sarker Md Nasrullah, Afsana Hossain Bristy, Minhajul Islam Shawon, and Ashraful Hoque. "Detection of Autism Spectrum Disorder by Discriminant Analysis Algorithm." In Proceedings of the International Conference on Big Data, IoT, and Machine Learning, Lecture Notes on Data Engineering and Communications Technologies book series (LNDECT), vol 95, pp. 473-482. Springer, Singapore, 2022.

M. A. Rabbi Emon,H. J. Apon, F. Faisal, M. M. Nishat et al., "Advanced Encryption Standard for embedded applications: An FPGA-based implementation using VHDL," 2021 3rd IEEE Middle East and North Africa COMMunications Conference (MENACOMM), 2021, pp. 120-124, IEEE, Morocco.

Rabbi Emon, M. A., Jamil Apon, H., Faisal, F., Nishat, M. M., Adil Morshed, K., Al Naser, A. M., Zerin Jaba, F., & Anzum, F. (2021). Advanced encryption standard for embedded applications: An FPGA-based implementation using VHDL. 2021 3rd IEEE Middle East and North Africa COMMunications Conference (MENACOMM). https://doi.org/10.1109/menacomm50742.2021.9678241

M. M. Nishat, M. A. Mahbub, A. Ahmed and M. A. Al Mamun, "Performance Assessment of Machine Learning Classifiers in Detecting Psychological Impact of Postgraduate Students due to COVID-19," 2021 6th IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE), 2021, pp. 1-6, doi: 10.1109/ICRAIE52900.2021.9703997.

Mohammad Rakibul Islam, Md Moinul Islam Khan, Sadia Siraz, Fariha Mehjabin, Muntaha Rahman, Mohibul Islam, Mariea Sharaf Anzum, Jubair Alam Chowdhury and Fateha Noor, “Design and analysis of a QC-SPR-PCF sensor for multipurpose sensing with supremely high FOM”, Applied Nanoscience 12, 29–45, 2022. [SCIE indexed, JCR Impact Factor: 3.869]

F. Hossain, F. Tahmid, A. Jawad and Nahid-Al-Masood, "A Load Shedding Methodology Using Monte Carlo Simulation in a Renewable Integrated Grid," 2021 IEEE International Conference on Power, Electrical, Electronic and Industrial Applications (PEEIACON), 2021, pp. 75-78, doi: 10.1109/PEEIACON54708.2021.9929700.

S. Muhtadi, A. Chowdhury, R. R. Razzaque and A. Shafiullah, "Analyzing the Texture of Nakagami Parametric Images for Classification of Breast Cancer," 2021 IEEE National Biomedical Engineering Conference (NBEC), 2021, pp. 100-105, doi: 10.1109/NBEC53282.2021.9618762.

Islam, M.R., Khan, M.M.I., Siraz, S. et al. Design and analysis of a QC-SPR-PCF sensor for multipurpose sensing with supremely high FOM. Appl Nanosci 12, 29–45 (2022). https://doi.org/10.1007/s13204-021-02150-6

Asif Newaz, Nadim Ahmed, Farhan Shahriyar Haq, "Survival Prediction of Heart Failure Patients Using Machine Learning Techniques", Informatics in Medicine Unlocked, vol. 26, p. 100772, 2021, doi: 10.1016/j.imu.2021.100772

H. J. Apon, M. S. Abid, K. A. Morshed, M. M. Nishat, F. Faisal and N. N. Ibrahim moubarak, "Power System Harmonics Estimation using Hybrid Archimedes Optimization Algorithm-based Least Square Method," 2021 13th International Conference on Information & Communication Technology and System (ICTS), pp. 312-317, October 20-21, 2021, IEEE, Surabaya, Indonesia.

S. Priyadarshi, M. M. Billah, H. H. Kim, M. H. Rabbi, S. S. Urmi, S. Lee, and J. Jang, High-Performance Dual Gate Amorphous InGaZnO Thin Film Transistor with Top Gate to Drain Offset. IEEE Electron Device Letters 43 (1), 56-59, 2021. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

A. Newaz, N. Ahmed and F. S. Haq, "Diagnosis of Liver Disease using Cost-Sensitive Support Vector Machine Classifier," 2021 International Conference on Computational Performance Evaluation (ComPE), 2021, pp. 421-425, doi: 10.1109/ComPE53109.2021.9752075

Md Rezaul Hoque Khan, Fath Ahmed Mohamed Ali and Mohammad Rakibul Islam, “THz sensing of CoViD-19 disinfecting products using photonic crystal fiber”, Sensing and Bio-Sensing Research”, Volume 33, August 2021, 100447.

S. T. Nushin, A. S. Alam, F. Sohel, N. Ahmed and F. Abid, "Short-Term Load Forecasting Model Considering the Impact of COVID-19 Lockdown in Bangladesh," 2021 IEEE International Conference on Telecommunications and Photonics (ICTP), 2021, pp. 1-5, doi: 10.1109/ICTP53732.2021.9744210

Kazi Sharmeen Rashid, Infiter Tathfif, Ahmad Azuad Yaseer, Md. Farhad Hassan, and Rakibul Hasan Sagor, "Cog-shaped refractive index sensor embedded with gold nanorods for temperature sensing of multiple analytes," Optics Express 29, 37541-37554 (2021), https://doi.org/10.1364/OE.442954

Kazi Sharmeen Rashid, Infiter Tathfif, Ahmad Azuad Yaseer, Md. Farhad Hassan, and Rakibul Hasan Sagor, "Cog-shaped refractive index sensor embedded with gold nanorods for temperature sensing of multiple analytes," Optics Express 29, 37541-37554 (2021), https://doi.org/10.1364/OE.442954

A. Newaz, N. Ahmed, and F. Shahriyar Haq, “Survival prediction of heart failure patients using machine learning techniques,” Informatics in Medicine Unlocked, vol. 26, 2021, doi: 10.1016/j.imu.2021.100772.

M. Rafique, A. Alavi, A. Farhad, Mohammad T. Kawser, “Suitability of FPS and DPS in NOMA for Real-Time and Non-Real Time Applications”, International Conference on Electrical Engineering, Computer Science and Informatics (EECSI), Semarang, Indonesia, pp. 117-122, October 20-21, 2021. DOI: 10.23919/EECSI53397.2021.9624291.

Apon, H. J., Abid, M. S., Morshed, K. A., Nishat, M. M., Faisal, F., & Ibrahim moubarak, N. N. (2021). Power system harmonics estimation using hybrid Archimedes optimization algorithm-based Least Square method. 2021 13th International Conference on Information & Communication Technology and System (ICTS). https://doi.org/10.1109/icts52701.2021.9608829

M. D. Rahman, F. Faisal, M. M. Nishat and M. R. K. Shagor, "Design and Analysis of Passive LC3Component Boost Converter," 2021 IEEE Madras Section Conference (MASCON), pp. 1-6, IEEE, Madras, India.

M. M. Billah, M. H. Rabbi, C. J. Park, and J. Jang, Highly Sensitive Temperature Sensor Using Low-temperature Polysilicon Oxide Thin-film Transistors. IEEE Electron Device Letters 42 (12), 1864-1867, 2021. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

M. M. Nishat, T. Hasan, S. M. Nasrullah, F. Faisal, M. A. -A. -R. Asif and M. A. Hoque, "Detection of Parkinson's Disease by Employing Boosting Algorithms," 2021 Joint 10th International Conference on Informatics, Electronics & Vision (ICIEV) and 2021 5th International Conference on Imaging, Vision & Pattern Recognition (icIVPR), pp. 1-7, IEEE, Kitakyushu, Japan

A. Newaz, F. S. Haq and N. Ahmed, "A Case Study on Risk Prediction in Heart Failure Patients using Random Survival Forest," 2021 5th International Conference on Electrical Engineering and Information & Communication Technology (ICEEICT), 2021, pp. 1-6, doi: 10.1109/ICEEICT53905.2021.9667933

Infiter Tathfif, Ahmad Azuad Yaseer, Kazi Sharmeen Rashid, and Rakibul Hasan Sagor, "Metal-insulator-metal waveguide-based optical pressure sensor embedded with arrays of silver nanorods," Optics Express, vol. 29 (2021), pp. 32365-32376, https://doi.org/10.1364/OE.439974

M. M. Nishat, F. Faisal, T. Hasan, M. F. B. Karim, Z. Islam and M. R. K. Shagor, "An Investigative Approach to Employ Support Vector Classifier as a Potential Detector of Brain Cancer from MRI Dataset," 2021 International Conference on Electronics, Communications and Information Technology (ICECIT), pp. 1-4, IEEE, 2021.

Infiter Tathfif, Kazi Sharmeen Rashid, Ahmad Azuad Yaseer, Rakibul Hasan Sagor, "Alternative material titanium nitride based refractive index sensor embedded with defects: An emerging solution in sensing arena," Results in Physics, Volume 29, 2021, 104795, ISSN 2211-3797, https://doi.org/10.1016/j.rinp.2021.104795

C. J. Park, M. M. Billah, A. B. Siddik, S. Lee, B. Han, and J. Jang, High Voltage Amorphous InGaZnO TFT with F doped Drain Offset Structure. IEEE Electron Device Letters 42(10), 1476 – 1479, 2021. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

Mirza Muntasir Nishat, Fahim Faisal, Rezuanur Rahman Dip, Sarker Md. Nasrullah, Ragib Ahsan, Fahim Shikder, Md. Asfi-Ar-Raihan Asif, Md. Ashraful Hoque,"A Comprehensive Analysis on Detecting Chronic Kidney Disease by Employing Machine Learning Algorithms", EAI Endorsed Transactions on Pervasive Health and Technology, vol 7, no. 29, 2021 (SCOPUS, Citescore: 2.0)

Md Omar Faruque, Rabiul Al Mahmud, and Rakibul Hasan Sagor. Highly Sensitive Plasmonic Refractive Index Sensor Using Doped Silicon: an Alternative to MIM Structures. Springer: Plasmonics, 1557-1963,(2021).

A. A. Mehadi, M. M. Nishat, F. Faisal, A. R. H. Bhuiyan, M. Hussain and M. A. Hoque, "Design, Simulation and Feasibility Analysis of Bifacial Solar PV System in Marine Drive Road, Cox’s Bazar," 2021 International Conference on Science & Contemporary Technologies (ICSCT), pp. 1-6. IEEE, 2021

F. Faisal, M. M. Nishat, M. A. Mahbub, M. M. I. Shawon and M. M. -U. -H. Alvi, "Covid-19 and its impact on school closures: a predictive analysis using machine learning algorithms," 2021 International Conference on Science & Contemporary Technologies (ICSCT), pp. 1-6, IEEE, 2021

Niloy, M.A. and Rifat, M.S.H., 2021, August. Solution of Combined Economic and Emission Dispatch using Slime Mould Optimization Algorithm. In 2021 International Conference on Science & Contemporary Technologies (ICSCT) (pp. 1-6). IEEE.

Khan, Md Rezaul Hoque, Fath Ahmed Mohamed Ali, and Mohammad Rakibul Islam. "THz sensing of CoViD-19 disinfecting products using photonic crystal fiber." Sensing and BioSensing Research (2021)

J. K. Saha, M. M. Billah, and J. Jang, Triple-Stack ZnO/AlZnO/YZnO Heterojunction Oxide Thin-Film Transistors by Spray Pyrolysis for High Mobility and Excellent Stability. ACS applied materials & interfaces 13 (31), 37350-37362, 2021. [SCIE Q1 indexed, JCR Impact Factor: 10.38].

Mohammad Rakibul Islam, Fahim Yasir, Md. Rakib Hossain Antor, Mahmudul Hassan Turja, Ashikur Rahman, Md. Rezaul Hoque Khan, Md. Taslim Reza (2021). "An Eye-Shaped Ultra-Sensitive Localized Surface Plasmon Resonance–Based Biochemical Sensor.", Plasmonics, Volume-16, Issue-4, August 2021.

Islam, M.R., Yasir, F., Antor, M.H. et al. An Eye-Shaped Ultra-Sensitive Localized Surface Plasmon Resonance–Based Biochemical Sensor. Plasmonics (2021). [SCIE indexed, JCR Impact Factor: 2.335]

Kazi Sharmeen Rashid, Md. Farhad Hassan, Ahmad Azuad Yaseer, Infiter Tathfif, and Rakibul Hasan Sagor, "Gas-Sensing and Label-free Detection of Biomaterials Employing Multiple Rings Structured Plasmonic Nanosensor," Volume 33, 2021, Page 100440, ISSN 2214-1804, https://doi.org/10.1016/j.sbsr.2021.100440

M. Mativenga, F. Haque, M. M. Billah, and J. G. Um, Origin of Light Instability in Amorphous IGZO thin-film Transistors and its Suppression. Nat. Sci. Rep. 11(1), 14618, 2021. [SCIE Q1 indexed, JCR Impact Factor: 4.996].

A. Newaz and S. Muhtadi, "Performance Improvement of Heart Disease Prediction by Identifying Optimal Feature Sets Using Feature Selection Technique," 2021 International Conference on Information Technology (ICIT), 2021, pp. 446-450, doi: 10.1109/ICIT52682.2021.9491739.

A. Newaz and S. Muhtadi, "Performance Improvement of Heart Disease Prediction by Identifying Optimal Feature Sets Using Feature Selection Technique," 2021 International Conference on Information Technology (ICIT), 2021, pp. 446-450, doi: 10.1109/ICIT52682.2021.9491739.

Abdullah Al Mehadi, Misbahul Alam Chowdhury, Mirza Muntasir Nishat, Fahim Faisal, Md Minhajul Islam, "A software-based approach in designing a rooftop bifacial PV system for the North Hall of Residence, IUT", Clean Energy, Volume 5, Issue 3, September 2021, Pages 403–422, Oxford University Press (SCOPUS, Q1)

S. M. N. Hasan, W. You, M. S. I. Sumon, and S. Arafin, “Recent Progress of Electrically Pumped AlGaN Diode Lasers in the UV-B and -C Bands,” Photonics, vol. 8, no. 7, p. 267, Jul. 2021.

Islam, Mohammad Rakibul, Fahim Yasir, Md Rakib Hossain Antor, Mahmudul Hassan Turja, Ashikur Rahman, Md Rezaul Hoque Khan, and Md Taslim Reza. "An Eye-Shaped Ultra-Sensitive Localized Surface Plasmon Resonance–Based Biochemical Sensor." Plasmonics (2021): 1-11.

D. Y. Jeong, M. M. Billah, A. B. Siddik, H. Han, Y. Chang, and J. Jang, High-Performance Dual Gate Blue Laser Annealed Poly-Si Thin-Film Transistor for High-Resolution Displays. IEEE Transactions on Electron Devices 68 (8), 3863-3869, 2021. [SCIE Q1 indexed, JCR Impact Factor: 2.917].

Ahmad Chowdhury, Sabiq Muhtadi, Rezwana Rosen, Ahmad Shafiullah, Brian Garra, S. Kaisar Alam, "Improved Classification of Benign and Malignant Breast Tumors Using Nakagami Parameters," Official Proceedings of the AIUM Annual Integrative Ultrasound Meeting, April 11-14, 2021, Journal of Ultrasound in Medicine, Volume-40, pp. S5, doi: https://doi.org/10.1002/jum.15752

D. Y. Jeong, M. M. Billah, and J. Jang, Amorphous InGaZnO/Poly-Si Coplanar Heterojunction TFT for Memory Applications. IEEE Electron Device Letters 42(8), 1172 – 1175, 2021. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

M. N. I. Siddique, N. Ahmed, S. M. Abdullah, and M. Z. R. Khan, “An automated transmitter positioning system for misalignment compensation of capacitive-coupled electric vehicles,” International Journal of Electrical and Computer Engineering (IJECE), vol. 12, no. 4, pp. 3505–3516, 2022, doi: 10.11591/ijece.v12i4.pp3505-3516

Mohammad T. Kawser, M. M. Haque, M. S. Rahman and Z. K. Eisham, “Estimation of Outdoor to Indoor Loss Variation Pattern within 5G Spectrum and Loss Model Comparison”, International Conference on Electrical, Communication, and Computer Engineering (ICECCE), pp. 1-6, Kuala Lumpur, Malaysia, June 12-13, 2021. DOI: 10.1109/ICECCE52056.2021.9514193

M. T. Kawser, M. M. Haque, M. S. Rahman and Z. K. Eisham, "Estimation of Outdoor to Indoor Loss Variation Pattern within 5G Spectrum and Loss Model Comparison," 2021 International Conference on Electrical, Communication, and Computer Engineering (ICECCE), 2021, pp. 1-6, doi: 10.1109/ICECCE52056.2021.9514193.

Faruque, M.O., Al Mahmud, R. and Sagor, R.H., 2021. Heavily doped silicon: A potential replacement of conventional plasmonic metals. Journal of Semiconductors, 42(6), p.062302.

Abid, M. S., Apon, H. J., Morshed, K. A., & Abid, F. (2021). Impact assessment of charging of electric vehicle on residential distribution network of Bangladesh. 2021 56th International Universities Power Engineering Conference (UPEC). https://doi.org/10.1109/upec50034.2021.9548193

M. F. Hassan, R. H. Sagor, M. R. Amin, M. R. Islam and M. S. Alam, "Point of Care Detection of Blood Electrolytes and Glucose Utilizing Nano-Dot Enhanced Plasmonic Biosensor," in IEEE Sensors Journal, vol. 21, no. 16, pp. 17749-17757, 15 Aug.15, 2021, [SCI indexed, JCR Impact Factor: 3.301]

J. B. Kim, D. K. Yim, S. Y. Choi, D. Severin, J. Liu, M. Hanika, M. Bender, M. M. Billah, A. B. Siddik, and J. Jang, High mobility self-aligned coplanar thin-film transistors with a novel dual channel oxide semiconductor architecture, In Proc. SID Display Week Symposium Digest of Technical Papers 52(1), 65, 2021, San Francisco, California, USA.

Md. Farhad Hassan, Rakibul Hasan Sagor, Md. Ruhul Amin, Mohammad Rakibul Islam, & Md. Shah Alam (2021). "Point of Care Detection of Blood Electrolytes and Glucose Utilizing Nano-Dot Enhanced Plasmonic Biosensor". IEEE Sensors Journal (2021).

Quazi Nafees Ul Islam, Ashik Ahmed, Saad Mohammad Abdullah,"Optimized controller design for islanded microgrid using non-dominated sorting whale optimization algorithm (NSWOA)", Ain Shams Engineering Journal, Volume 12, Issue 4, 2021, Pages 3677-3689, ISSN 2090-4479, https://doi.org/10.1016/j.asej.2021.01.035.

M. Rahman, N. Hassan and M. Z. R. Khan, "Design of a Low Power Off-Grid Photovoltaic Water Pumping System for Rural Areas," 2020 11th International Conference on Electrical and Computer Engineering (ICECE), 2020, pp. 314-317, doi: 10.1109/ICECE51571.2020.9393154.

Islam, M.A., Islam, M.R., Siraz, S. et al. Wheel structured Zeonex-based photonic crystal fiber sensor in THz regime for sensing milk. Appl. Phys. A 127, 311 (2021). [SCIE indexed, JCR Impact Factor: 2.584].

Islam, M.A., Islam, M.R., Siraz, S. et al. Wheel structured Zeonex-based photonic crystal fiber sensor in THz regime for sensing milk. Appl. Phys. A 127, 311 (2021). https://doi.org/10.1007/s00339-021-04472-2

Md. Aminul Islam, Mohammad Rakibul Islam, Zareen Mustafa, Aadreeta Hossain and Tahia Tahsin, “Hexa Circular Cladding with Circular Core Structure for PC PCF based Terahertz Wave Transmission”, Journal of Optoelectronics and Advanced Materials, 2021. [SCIE indexed, JCR Impact Factor: 0.587]

Nishat M. M, Faisal F, Mahbub M. A, Mahbub M. H, Islam S, Hoque M. A . Performance Assessment of Different Machine Learning Algorithms in Predicting Diabetes Mellitus. Biosc.Biotech.Res.Comm. 2021;14(1) [ESCI]

A. Kabir, M. R. Sunny and N. I. Siddique, "Assessment of Grid-connected Residential PV-Battery Systems in Sweden - A Techno-economic Perspective," 2021 IEEE International Conference in Power Engineering Application (ICPEA), 2021, pp. 73-78, doi: 10.1109/ICPEA51500.2021.9417835

Al Mahmud, Rabiul, Md Omar Faruque, and Rakibul Hasan Sagor. "A highly sensitive plasmonic refractive index sensor based on triangular resonator." Optics Communications 483 (2021): 126634.

Md Omar Faruque, Rabiul Al Mahmud, and Rakibul Hasan Sagor. "Heavily doped silicon: A potential replacement of conventional plasmonic metals." Journal of Semiconductors 42 (2021): 1-6.

M. M. Billah, A. B. Siddik, J. B. Kim, D. K. Yim, S. Y. Choi, J. Liu, D. Severin, M. Hankia, M. Bender, and J. Jang, High-Performance Coplanar Dual-Channel a-InGaZnO/a-InZnO Semiconductor Thin-Film Transistors with High Field-Effect Mobility. Adv. Elec. Mater. 7(3), 2000896, 2021. [SCIE Q1 indexed, JCR Impact Factor: 7.295].

D Kim, M. M Billah, S. Lee, A. B. Siddik, Y. J. Cho, J. Jang, J. Lee, Y. Lee, and J. Shin, Excellent Mechanical Durability of In-Folding Stress of Poly-Si Thin-Film Transistor on Plastic Substrate Compared with Out-Folding: Generation of Gate Leakage Currents in Flexible Poly-Si Thin-Film Transistor by Out-Folding and Bias-Temperature Stress, Adv. Eng. Mater. 23 (3), 2000901, 2021. [SCIE Q1 indexed, JCR Impact Factor: 4.122].

Md. Farhad Hassan; Md. Saiful Islam Sumon; Md. Moudud Hasan; Md. Arefin Rabbi Emon; Rakibul Hasan Sagor, "Design and Analysis of a Highly Efficient Rectangular Cavity Based Semi-Elliptic Nanoplasmonic Coupler", 2020 IEEE 8th R10 Humanitarian Technology Conference (R10-HTC)

Mohammad Rakibul Islam, Md. Abu Jamil, Syed Asir Hamim Ahsan, Md Moinul Islam Khan, Fariha Mehjabin, Jubair Alam Chowdhury and Mohibul Islam, “Highly Birefringent Gold Coated SPR Sensor with Extremely Enhanced Amplitude and Wavelength Sensitivity”, The European Physical Journal Plus, February 2021. [SCI indexed, JCR Impact Factor: 3.228]

Mohammad Rakibul Islam, A. N. M. Iftekher, Kazi Rakibul Hasan, Md. Julkar Nayen, Saimon Bin Islam, Aadreeta Hossain, Zareen Mustafa and Tahia Tahsin, “Design and Numerical Analysis of a Simple Gold-Coated Photonic Crystal Fiber Based Plasmonic Biosensor”, Optical and Quantum Electronics, February 2021. [SCI indexed, JCR Impact Factor: 1.842]

Hossain M.A., Abdullah S.M., Ahmed A., Islam Q.N.U., Tito S.R. (2021) Optimal Generation Mix of Hybrid Renewable Energy System Employing Hybrid Optimization Algorithm. In: Vasant P., Zelinka I., Weber GW. (eds) Intelligent Computing and Optimization. ICO 2020. Advances in Intelligent Systems and Computing, vol 1324. Springer, Cham. https://doi.org/10.1007/978-3-030-68154-8_59

M. A. Hossain, S. M. Abdullah, A. Ahmed, Q. N. U. Islam, S. R. Tito (2021) Optimal Generation Mix of Hybrid Renewable Energy System Employing Hybrid Optimization Algorithm. In: Vasant P., Zelinka I., Weber GW. (eds) Intelligent Computing and Optimization. ICO 2020. Advances in Intelligent Systems and Computing, vol 1324. Springer, Cham. https://doi.org/10.1007/978-3-030-68154-8_59

Hossain, M.A., Abdullah, S.M., Ahmed, A., Islam, Q.N.U., Tito, S.R. (2021). Optimal Generation Mix of Hybrid Renewable Energy System Employing Hybrid Optimization Algorithm. In: Vasant, P., Zelinka, I., Weber, GW. (eds) Intelligent Computing and Optimization. ICO 2020. Advances in Intelligent Systems and Computing, vol 1324. Springer, Cham. https://doi.org/10.1007/978-3-030-68154-8_59

Kazi Sharmeen Rashid, Md. Farhad Hassan, Ahmad Azuad Yaseer, Infiter Tathfif, and Rakibul Hasan Sagor, "Gas-Sensing and Label-free Detection of Biomaterials Employing Multiple Rings Structured Plasmonic Nanosensor," Sensing and Bio-Sensing Research, 2021, https://doi.org/10.1016/j.sbsr.2021.100440

Md. Asfi-Ar-Raihan Asif, Mirza Muntasir Nishat, Fahim Faisal, Rezuanur Rahman Dip, Mahmudul Hasan Udoy, Md. Fahim Shikder, and Ragib Ahsan, "Performance Evaluation and Comparative Analysis of Different Machine Learning Algorithms in Predicting Cardiovascular Disease," Engineering Letters, vol. 29, no. 2, pp731-741, 2021 [SCOPUS, ESCI]

C. Avis, M. M Billah, Y. G. Kim, A. B. Siddik, J. Jang, Analysis of the Solution-Processed a-SnOX and HfO2 Interface for Applications in Thin-Film Transistors, ACS. Appl. Elec. Mater. 3 (2), 651-657, 2021. [SCIE Q2 indexed, JCR Impact Factor: 4.494].

Mohammad Rakibul Islam, A. N. M. Iftekher, Kazi Rakibul Hasan, Md. Julkar Nayen, Saimon Bin Islam, Rakina Islam, Raisa Labiba Khan, Ehtesam Moazzam and Zarrin Tasnim, “Surface Plasmon Resonance based Ultra high Sensitive and Birefringent PCF Biosensor”, Applied Physics A, February 2021. [SCIE indexed, JCR Impact Factor: 1.810]

Mohammad Rakibul Islam, A. N. M. Iftekher, Farhana Akter Mou, Md. Moshiur Rahman, and Mohammed Imamul Hassan Bhuiyan, “Design of a Topas based Ultra High Sensitive PCF Biosensor for Blood Component Detection”, Applied Physics A, February 2021. [SCIE indexed, JCR Impact Factor: 1.810]

M. F. Hassan, R. H. Sagor, I. Tathfif, K. S. Rashid and M. Radoan, "An Optimized Dielectric-Metal-Dielectric Refractive Index Nanosensor," in IEEE Sensors Journal, vol. 21, no. 2, pp. 1461-1469, 15 Jan.15, 2021, doi: 10.1109/JSEN.2020.3016570.

Rabiul Al Mahmud, Md Omar Faruque, and Rakibul Hasan Sagor. "Plasmonic Refractive Index Sensor Based on Ring-Type Pentagonal Resonator with High Sensitivity." Springer: Plasmonics (2021).

Mohammad Rakibul Islam, A. N. M. Iftekher, Kazi Rakibul Hasan, Md. Julkar Nayen, Saimon Bin Islam, Md Moinul Islam Khan, Jubair Alam Chowdhury, Fariha Mehjabin and Mohibul Islam, “Design and Analysis of a Biochemical sensor based on Surface Plasmon Resonance with Ultra-High Sensitivity”, Plasmonics, January 2021. [SCIE indexed, JCR Impact Factor: 2.335]

T. Hasan et al., "Exploring the Performances of Stacking Classifier in Predicting Patients Having Stroke," 2021 8th NAFOSTED Conference on Information and Computer Science (NICS), 2021, pp. 242-247,

Al Mahmud, Rabiul, Md Omar Faruque, and Rakibul Hasan Sagor. "Plasmonic Refractive Index Sensor Based on Ring-Type Pentagonal Resonator with High Sensitivity." Plasmonics (2021): 1-8.

Mirza Muntasir Nishat, Fahim Faisal, Md. Ashif Mahbub, Md. Hasib Mahbub, Shuvo Islam and Md. Ashraful Hoque, “Performance Assessment of Different Machine Learning Algorithms in Predicting Diabetes Mellitus,” Bioscience Biotechnology Research Communications, 2021.

M. R. H. Khan, M. A. Hoque, and M. S. Rahman, "Internet of Things (IoT) for MC-CDMA Based Cognitive Radio Network (CRN) in 5G: Performance Results," J. of Information & Knowledge Management (JIKM), vol. 20, p. 2140009, 2021. (ESCI)

Technical and Vocational Education

Nishat, M. M., Mahbub, Md. A., Ahmed, A., & Al Mamun, M. A. (2021). Performance Assessment of Machine Learning Classifiers in Detecting Psychological Impact of Postgraduate Students due to COVID-19. IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE), IEEE Xplore, 1–6. https://doi.org/10.1109/ICRAIE52900.2021.9703997

F. B. Iron-Baba, F.A. Haolader (2021). A Comparative Study on Engineering Student's Performance between the Single Gender Classroom and Co-educational Classroom: A Case Study of Islamic University of Technology. OIRT Journal of Information Technology Available at: https://journals.otuirt.com/index.php/OJIT. e-ISSN:2814-0990., Vol. 1, No. 3, November – December 2021.

Asuma, B., Khan, M. S. H. & Mubarak, H.R. (2021) Integrating Web-based Learning in Uganda: Possibilities and Challenges, In: E. Eilu and J. S. Pettersson (Eds) Digital Literacy and Socio- Cultural Acceptance of ICT in Developing Countries, Springer International Publishing, Germany, pp 157-179

Shamim, M. R. h., Mamun, M. A., Raihan, M. A. (2021). STEM Teachers’ pedagogical beliefs about online teaching amidst the COVID 19 pandemic: The Bangladesh context. Reimagining Education Research- Proceedings of 50th conference organised by Australian Association for Research in Education (AARE), 28 November - 02 December, Online Conference, Co-hosted in partnership with RMIT School of Education and USQ School of Education, Australia. https://aare2021-c72175.eorganiser.com.au/data/clients/59/595/submissions/108499/abstract.pdf

Shamim, M. R. H., al Mamun, M. A., & Raihan, Md. A. (2022). Mapping the Research of Technical Teachers ’ Pedagogical Beliefs about Science Technology Engineering and Mathematics (STEM) Education. International Journal of Instruction, 15(4), 797–818. https://www.e-iji.net/dosyalar/iji_2022_4_43.pdf

F.A. Haolader. Designing, Developing and Delivering TVET Courses in Blended Learning/ E-Learning Approach: Sharing Experience from Germany and Bangladesh. Presented at the Training Workshop on “Distance Education and E-Learning in TVET”, organized (online) by OIC-VET, SESRIC, OIC, in Turkey on 20-22 September 2022.

Cherotwo, A., Shamim, M.R.H. and Raihan, M. A. (2021). “Identifying major challenges faced by teachers while teaching computer programming in universities” in the International Journal of Smart Technology and Learning, ISSN online: 2056-4058; ISSN print: 2056-404X.

F.A. Haolader. ‘Popularising TVET: Strategies and Mechanisms’. Invited speaker at the Short-Course on "Technical and Vocational Education and Training (TVET) for Administrators", organised by National Institute for Technical Teachers Training and Research (NITTTR) Chennai, India, held from 28 March 2022 to 08 April 2022.

Salele, N., & Khan, M. S. H. (2021). Trainee-Teachers' Attitudes Towards Technology Use in Engineering Education of Bangladesh, Paper presented at 45th ATEE Annual Conference on (Re)imagining & Remaking Teacher Education organize by University of Warsaw, Poland, Poland 9-11 September 2021, (Page: 139-140).

Khan, M. S. H. & Gregory, S. (2021). New way of investigating ICT-enhanced teaching in TAFE Australia: Disciplinary focused. In Gregory, S., Warburton, S., & Schier, M. (Eds.), Back to the Future - ASCILITE '21. Proceedings ASCILITE 2021 in Armidale (pp. 213- 218. https://doi.org/10.14742/ascilite2021.0132

Shamim, M. R. H., Mamun, M. A., Raihan, M. R. (2021). STEM Teachers' pedagogical beliefs about online teaching amidst the COVID 19 pandemic: The Bangladesh context. Reimagining Education Research- Proceedings of 50th conference organised by Australian Association for Research in Education (AARE), RMIT School of Education and USQ School of Education, Australia.

Computer Science and Engineering

I. Hussain, M. A. Hossain, and S.-J. Park, "A healthcare digital twin for diagnosis of stroke", in 2021 IEEE International Conference on Biomedical Engineering, Computer and Information Technology for Health (BECITHCON), IEEE, Dhaka, Bangladesh, Dec. 2021, pp. 18–21.

T. Ahmed, M. Kabir, S. Ivan, H. Mahmud and K. Hasan, "Am I Being Bullied on Social Media? An Ensemble Approach to Categorize Cyberbullying," 2021 IEEE International Conference on Big Data (Big Data), 2021, pp. 2442-2453, doi: 10.1109/BigData52589.2021.9671594.

Tasnim Ahmed, Md. Mosinul Kabir, Shahriar Ivan, Hasan Mahmud and Md. Kamrul Hasan, "Am I Being Bullied on Social Media? An Ensemble Approach to Categorize Cyberbullying," 2021 IEEE International Conference on Big Data (Big Data), 2021, pp. 2442-2453, doi: 10.1109/BigData52589.2021.9671594

End-to-End Natural Language Understanding Pipeline for Bangla Conversational Agents (ICMLA) [DOI: 10.1109/ICMLA52953.2021.00039]

A. S. A. Rabby, M. M. Islam, \textbf{Z. Islam}, N. Hasan and F. Rahman, \textbf{"Towards Building A Robust Large-Scale Bangla Text Recognition Solution Using A Unique Multiple-Domain Character-Based Document Recognition Approach"}, 2021 20th IEEE International Conference on Machine Learning and Applications (ICMLA), Pasadena, CA, USA, Dec. 13-16 2021, pp. 1393-1399

MD. Nazmus Sakib, Mehrab Mustafy Rahman, Hasan Mahmud, Md. Kamrul Hasan, "Augmented Reality Based Lifelogging System For Reminiscence", International Conference on Fourth Industrial Revolution and Beyond 2021 - IC4IR 2021, Organized by UGC, Dhaka, 10-11 December, 2021

MD. Nazmus Sakib, Mehrab Mustafy Rahman, Hasan Mahmud, Md. Kamrul Hasan, "Augmented Reality Based Lifelogging System For Reminiscence", International Conference on Fourth Industrial Revolution and Beyond 2021 - IC4IR 2021, Organized by UGC, Dhaka, 10-11 December, 2021.

S. M. Rayeed, Sidratul Tamzida Tuba, Golam Sadman Zilanni, Hasan Mahmud, Md. Kamrul Hasan, "Bangla Sign Digits Recognition using Depth Information", The 14th International Conference on Machine Vision (ICMV 2021), 8-12 Novemver, 2021, Rome, Italy

Hasan Mahmud, Robiul Islam, Md. Kamrul Hasan, "On-air English Capital Alphabet (ECA) recognition using depth information", The Visual Computer Journal, 30 January 2021, Springer-Verlag GmbH Germany, part of Springer Nature, https://doi.org/10.1007/s00371-021-02065-x

M. R. Karim, S. K. Dey, T. Islam, S. Sarker, M. H. Menon, K. Hosain, M. A. Hossain, and S. Decker, "Deephateexplainer: Explainable hate speech detection in under-resourced bengali language", in 2021 IEEE 8th International Conference on Data Science and Advanced Analytics (DSAA), IEEE, Porto, Portugal, Oct. 2021, pp. 1–10 (A* Conference).

Arowa Yasmeen, Fariha Ishrat Rahman, Sabbir Ahmed, Md. Hasanul Kabir, "CSVC-Net: Code-Switched Voice Command Classification using Deep CNN-LSTM Network", Joint 2021 5th International Conference on Imaging, Vision & Pattern Recognition (IVPR) and10th International Conference on Informatics, Electronics & Vision (ICIEV), 2021

Ayesha khatun, Sajid shahriar, Hasibul islam, Krishna das, Sabbir Ahmed, Md. Sakibul Islam, "A Systematic Review on the Chronological Development of Bangla Sign Language Recognition Systems", Joint 2021 5th International Conference on Imaging, Vision & Pattern Recognition (IVPR) and10th International Conference on Informatics, Electronics & Vision (ICIEV), 2021

A. Yasmeen, F. I. Rahman, S. Ahmed and M. H. Kabir, "CSVC-Net: Code-Switched Voice Command Classification using Deep CNN-LSTM Network," 2021 Joint 10th International Conference on Informatics, Electronics & Vision (ICIEV) and 2021 5th International Conference on Imaging, Vision & Pattern Recognition (icIVPR), 2021, pp. 1-8, doi: 10.1109/ICIEVicIVPR52578.2021.9564183. [Best Presentation Award]

S. N. Hossain, M. H. Kabir and A. Pal, "Alignment Free Sequence Similarity Estimation using Local Binary Pattern on DNA Trajectory Images," 2021 Joint 10th International Conference on Informatics, Electronics & Vision (ICIEV) and 2021 5th International Conference on Imaging, Vision & Pattern Recognition (icIVPR), 2021, pp. 1-7, doi: 10.1109/ICIEVicIVPR52578.2021.9564141.

Uddin, SM Shihab, Md Samin Morshed, Mahruf Islam Prottoy, and ABM Ashikur Rahman. "Age Estimation from Facial Images using Transfer Learning and K-fold Cross-Validation." In 2021 3rd International Conference on Pattern Recognition and Intelligent Systems, pp. 33-36. 2021.

Z. Islam, M. Rukonuzzaman, R. Ahmed, M. H. Kabir and M. Farazi, "Efficient Two-Stream Network for Violence Detection Using Separable Convolutional LSTM", International Joint Conference on Neural Networks (IJCNN), Shenzhen, China, July 18-22, 2021, pp. 1-8

Z. Islam, M. Rukonuzzaman, R. Ahmed, M. H. Kabir and M. Farazi, "Efficient Two-Stream Network for Violence Detection Using Separable Convolutional LSTM," 2021 International Joint Conference on Neural Networks (IJCNN), 2021, pp. 1-8, doi: 10.1109/IJCNN52387.2021.9534280.

B. Al-athwari and M. A. Hossain, "Iot architecture: Challenges and open research issues", in Proceedings of 2nd International Conference on Smart Computing and Cyber Security: Strategic Foresight, Security Challenges and Innovation (SMARTCYBER 2021), Springer, Guseong-gun, Republic of Korea, Jun. 2021, pp. 408–419. (Scopus Indexed)

M. A. Hossain, I. Hussain, B. Al-Athwari, and S. Dahit, "Network traffic anomalies detection using machine learning algorithm: A performance study", in Proceedings of 2nd International Conference on Smart Computing and Cyber Security: Strategic Foresight, Security Challenges and Innovation (SMARTCYBER 2021), Springer, Guseong-gun, Republic of Korea, Jun. 2021, pp. 274–282. (Scopus Indexed)

I. Hussain, M. A. Hossain, and S.-J. Park, "A healthcare digital twin for diagnosis of stroke", in 2021 IEEE International Conference on Biomedical Engineering, Computer and Information Technology for Health (BECITHCON), IEEE, Dhaka, Bangladesh, Dec. 2021, pp. 18–21.

P. Black, I. Gondal, A. Bagirov, and M. Moniruzzaman, “Malware Variant Identification Using Incremental Clustering,” Electronics, vol. 10, no. 14, p. 1628, Jul. 2021.

A. I. Champa, M. F. Rabbi, S. M. Mahedy Hasan, A. Zaman and M. H. Kabir, "Tree-Based Classifier for Hyperspectral Image Classification via Hybrid Technique of Feature Reduction," 2021 International Conference on Information and Communication Technology for Sustainable Development (ICICT4SD), 2021, pp. 115-119, doi: 10.1109/ICICT4SD50815.2021.9396809.

Hasan Mahmud, Robiul Islam, Md. Kamrul Hasan, "On-air English Capital Alphabet (ECA) recognition using depth information", The Visual Computer Journal, 30 January 2021, Springer-Verlag GmbH Germany, part of Springer Nature, https://doi.org/10.1007/s00371-021-02065-x [SCIE/Web of Science indexed, IF 3.5] [Q2: Computer Vision and Pattern Recognition]

Hossain Md Azam and Baseem Al-Atwari, "Blockchain-Based IoT Forensics: Challenges and State-of-the-art Frameworks", Artificial Intelligence and Blockchain for Future Cybersecurity Applications, 361 Springer, 2021.

Civil & Environmental Engineering

AH Mahmood, A Kashani (2022), 'Recycled glass as a concrete component: possibilities and challenges', in Handbook of Sustainable Concrete and Industrial Waste Management: Recycled and Artificial Aggregate, Innovative Eco-friendly Binders, and Life Cycle Assessment, Elsevier.

Rahman. M.D., Sadeek, S.N., Ahmed, A., Rifaat, S.M., Abrar, M. (2021). Effect of socio-economic and demographic factors on ride-sourcing services in Dhaka City, Bangladesh. Transportation Research Interdisciplinary Perspectives, Volume 12, 100492. (Scopus Indexed Journal)

Khan, M. K., Islam, S. B., Tasnim, A. A., Rahman, M. H., Rifaat, S. M. (2021). Assessment of Perceived Service Quality, Safety and Security of Ride-sourcing Services from Passenger’s Perspective in Dhaka City. Paper presented and published in the proceedings of 3rd Conference of ASEAN Road Safety (CARS), 6-7 July, 2021, Malaysia.

Ahmed, S., Rifaat, S. M., Ahmad, M. Z., Uddin, M. S. S.(2021). A Study on Comparison of Noise Level at Educational Institutions Adjacent to Highways Connecting with Dhaka City. Paper presented and published in the proceedings of 3rd Conference of ASEAN Road Safety (CARS), 6-7 July, 2021, Malaysia.

Anan, F. F., Ahmed, N.,Habib, K. T., Rahman, M. H., Rifaat, S. M. (2021). Evaluation of Satisfaction Level of Water Bus Services in Dhaka City from Commuters’ Perspective. Paper presented and published in the proceedings of 3rd Conference of ASEAN Road Safety (CARS), 6-7 July, 2021, Malaysia.

Halima,U., Kayes, M. I.,Musfique, I., Rahman, M. H., Rifaat, S. M.(2021).cA Comparative Analysis of Speed Variations among Different Distances from the Point of Jaywalking Initiation. Paper presented and published in the proceedings of 3rd Conference of ASEAN Road Safety (CARS), 6-7 July, 2021, Malaysia.

Tadda MA, Li C, Gouda M, Abomohra AE, Shitu A, Ahsan A, Zhu S, Liu D. (2021). Enhancement of nitrite/ammonia removal from saline recirculating aquaculture wastewater system using moving bed bioreactor. Journal of Environmental Chemical Engineering, 9(5):105947. IF=5.9, Q1, Elsevier (ISSN 2213-3437). (ISI) https://doi.org/10.1016/j.jece.2021.105947

Muhamad Ng, S.N.; Idrus, S.; Ahsan, A.; Marzuki, T.N.T.M.; Mahat, S.B. (2021). Treatment of wastewater from a food and beverage industry using conventional wastewater treatment integrated with membrane bioreactor system: a pilot-scale case study. Membranes, 11(6), 456. IF=4.1, Q1 (ISSN: 2077-0375). (ISI) https://doi.org/10.3390/membranes11060456

Salim, S. I., Al-Nabhan, N. A., Rahaman, M., Islam, N., Toha, T. R., Noor, J., Mostak, A., Hossain, M., Mushfiq, M., and Islam, A. B. M. A. A., “Human-Survey Interaction (HSI): A Study on Integrity of Human Data Collectors in a Mass-Scale Hajj Pilgrimage Survey”. IEEE Access, 9, 2021, p. 112528-112551

Tarek Uddin MOHAMMED, Aziz Hasan MAHMOOD, Mohammad Zunaied-Bin-HARUN, Jamil Ahmed JOY, Md. Asif AHMED (2021). Destructive and non-destructive evaluation of concrete for optimum sand to aggregate volume ratio. Front. Struct. Civ. Eng., https://doi.org/10.1007/s11709-021-0779-8

Hossain, A., Alam, T., Barua, S. & Rahman, R. (2021). Estimation of shear strength parameter of Silty Sand from SPT-N60 using machine learning models. Geomechanics and Geoengineering. https://doi.org/10.1080/17486025.2021.1975048

Anik, M. A. H., Hossain, M., and Habib, M. A. (2021) Investigation of Pedestrian Jaywalking Behaviour using Artificial Neural Networks. Safety Science. 144:105448. https://doi.org/10.1016/j.ssci.2021.105448

Imteaz MA, Hossain I, Ahsan A, Shanableh A. (2021). SwinOSD: A computer tool for designing onsite detention basin. International Journal of Hydrology Science and Technology, 11(3):269-81. Inderscience (pISSN: 2042-7808, eISSN: 2042-7816) (Scopus) https://doi.org/10.1504/IJHST.2021.114547

Habib, M.A., and Anik, M.A.H. (2021) Impacts of COVID-19 on Transport Modes and Mobility Behavior: Analysis of Public Discourse in Twitter. Transportation Research Record: Journal of the Transportation Research Board . https://doi.org/10.1177/03611981211029926

Alom MM, Ahsan A, Imteaz M. (2021). Quantity and quality of condensate air conditioner water for potential use in drinking purpose. Desalination and Water Treatment, 210, 164 – 169. Taylor & Francis, UK (ISSN 1944-3994). (SCI) https://doi.org/10.5004/dwt.2021.26571

*** Ahsan A, Imteaz M. (2021). Global water crisis can be overcome by desalination. Journal of Desalination and Water Purification, 22:1. http://ababilpub.com/download/jdwp22-1/ ***editorial

More prior publications can be found here – www.scopus.com/authid/detail.url?authorId=36008141300 - http://scholar.google.com.my/citations?user=Key57iYAAAAJ&hl=en - http://orcid.org/0000-0002-0015-6123

Kabir, M.I.; Lee, C.K.; Zhang, Y.X., 2020, ‘Numerical and Analytical Investigations of Flexural Behaviours of ECC–LWC Encased Steel Beams’, Engineering Structures, Volume 239, 15 July 2021, 112356, DOI: https://doi.org/10.1016/j.engstruct.2021.112356

S Gupta, A Kashani, AH Mahmood, T Han (2021), 'Carbon sequestration in cementitious composites using biochar and fly ash – Effect on mechanical and durability properties', Construction and Building Materials, Vol. 291, 123363.

Habib, M. A. and Anik, M. A. H. (2021) Examining the long term impacts of COVID-19 using an integrated transport and land-use modelling system, International Journal of Urban Sciences. 25(3). https://doi.org/10.1080/12265934.2021.1951821

Islam, N., Toha, T. T., Islam, M. M., and Ahmed, T. “Spatio-temporal Analysis to Understand Seasonal Dependency of Particulate Matter Concentration on Meteorological Parameters in Bangladesh”, Aerosol and Air Quality Research, 2022. (1st Revision)

Aziz Hasan Mahmood, Xuesong Shen, Ahsan Parvez, James Aldred, and Stephen J Foster (2020), 'Performance of Geopolymer Concrete Pavement at Wyndham Street for City of Sydney: Update November 2020', UNICIV Report No. R-468, ISBN: 978-0-7334-3981-0.

TU Mohammed, AH Mahmood, SM Apurbo, MA Noor (2021), 'Substituting brick aggregate with induction furnace slag for sustainable concrete', Sustainable Materials and Technologies, Vol. 29, e00303.

Rashid, I., Alam, T., Ahmed, T., Ali, M.A. (2021). “Evaluation of the effectiveness of zinc as scale inhibitor in delaying precipitation of CaCO3 in water treatment and distribution systems.” Proceedings of International Conference on Advances in Civil Engineering 2020, Chattogram. http://icacecuet.org/Proceedings_ICACE-2020.pdf [Presented].

Barua, S., Alam, T., & Mahmud, M. (2021).” Estimating Particulate Matter using Statistical Modeling Methods: case study - Chattogram, Bangladesh.” Proceedings of International Conference on Advances in Civil Engineering 2020, Chattogram. http://icacecuet.org/Proceedings_ICACE-2020.pdf [Presented]

Alam, T., Tabassum, N., Shahriyar, A., Dipto, S.B., Yousuf, I.B., Islam, N., & Rahman, S.M. (2021). “Heavy Metal Pollution in Surface Water of Bangladesh: A Critical Review”. Book of Abstracts. International Conference on Water and Flood Management 2021, Dhaka. [Presented]

1. Kabir, M.I.; Lee, CK; Zhang, Y.X., ‘Experimental study on the flexural behaviour of ECC encased steel composite beams’ in Advances in Engineered Cementitious Composites: Materials, Structures and Numerical Modelling, Woodhead Publishing Series in Civil and Structural Engineering 2022, Pages 209-247.

2. Kabir, M.I.; Lee, CK; Zhang, Y.X., ‘Finite element analysis of ECC encased steel composite beams subjected to bending’ in Advances in Engineered Cementitious Composites: Materials, Structures and Numerical Modelling, Woodhead Publishing Series in Civil and Structural Engineering 2022, Pages 471-500

Rahman H., Rifaat S.M. (2021) Using spatio-temporal deep learning for forecasting demand and supply-demand gap in ride-hailing system with anonymized spatial adjacency information. IET Intell Transp Syst. 2021; 1–17.(Web of Science and SCOPUS Indexed journal)

Islam, N., Saroar, G., and Ahmed, T., “Meteorological influences on urban air quality parameters in Northern Part of Dhaka city”, Journal of Engineering Science (JES), 11(2), 2020, 19-26.

AH Mahmood, M Babaee, SJ Foster, A Castel (2021), 'Continuous monitoring of the early-age properties of activated GGBFS with alkaline solutions of different concentrations', Journal of Materials in Civil Engineering, 10.1061/(ASCE)MT.1943-5533.0003997

Ma, Y., Elseifi, M. A., Dhakal, N., Bashar, M. Z., Zhang, Z. (2021). Non-Destructive Detection of Asphalt Concrete Stripping Damage Using Ground Penetrating Radar. Submitted to the Transportation Research Record: Journal of the Transportation Research Board.

Md. Rezaul Karim, Md. Habibur Rahman Bejoy Khan, Md. Abu-Sa-Ad Akash, Shahriar Shams. 2021. Effectiveness of solar disinfection for household water treatment: an experimental and modeling study. Journal of Water, Sanitation and Hygiene for Development. DOI: https://doi.org/10.2166/washdev.2021.243

Bashar, M. Z., Torres-Machi, C. (2021). Performance of the Machine Learning Algorithms in Predicting Pavement IRI. Transportation Research Record: Journal of the Transportation Research Board.

Habib, M.A., Anik, M. A. H., and Robertson, C. (2021) Exploring Travel Behaviour of Households with Pre-school Aged Children. Transportation Research Record : Journal of the Transportation Research Board. 2675(5):314-328. https://doi.org/10.1177/0361198120988006

Liu, Y., Sobhani, M. G., and Wu, Z. (2021). “Optimization of Overweight Truck Impact on Roadway Network with Minimum Cost Method: A Case Study in Louisiana”. 100th Annual Meeting of Transportation Research Board (TRB), Washington, D.C.

Mousa, M., Elseifi, M. A., Bashar, M. Z., Zhang, Z., Gaspard, K. (2021). Optimizing the Cost-Effectiveness and Time of Application of Microsurfacing. Journal of Transportation Engineering, Part B: Pavements.

S. Islam, H. M. Shahin, A. F. Azar, M.R. Hassan and M.I. Hossain (2021): Comparative evaluation of load bearing capacity of bored piles using numerical approach & empirical co-relations, 5th International Conference on Advances in Civil Engineering (March-2021), Bangladesh, December.

S. A Shafian, S. A. Talha, M. Hossain, M. Shaheduzzaman and H. M. Shahin (2021): Understanding the effect of degree of saturation on compressive strength behaviors for reconstituted clayey soil of Dhaka, 11th Int. Conf. on Geotechnique, Construction Materials and Environment, Kyoto on Civil, Structural, and Environmental Engineering (CSEE'22), Lisbon, Portugal, April., Japan, November.

S. A Shafian, S. A. Talha, M. Hossain, M. Shaheduzzaman and H. M. Shahin (2021): Understanding the effect of degree of saturation on compressive strength behaviors for reconstituted clayey soil of Dhaka, 11th Int. Conf. on Geotechnique, Construction Materials and Environment, Kyoto on Civil, Structural, and Environmental Engineering (CSEE'22), Lisbon, Portugal, April., Japan, November.

Business and Technology Management

Khayer, A., Jahan, N., Hossain, M.N. and Hossain, M.Y. (2021), "The adoption of cloud computing in small and medium enterprises: a developing country perspective", VINE Journal of Information and Knowledge Management Systems, Vol. 51 No. 1, pp. 64-91. SSCI (Q2), Scopus (Q1), ABDC (A). https://doi.org/10.1108/VJIKMS-05-2019-0064

Hossain, M.N., Talukder, M.S., Khayer, A. and Bao, Y. (2021), "Investigating the factors driving adult learners' continuous intention to use M-learning application: a fuzzy-set analysis", Journal of Research in Innovative Teaching & Learning, Vol. 14 No. 2, pp. 245-270. Scopus (Q1), ESCI. https://doi.org/10.1108/JRIT-09-2019-0071

Concept of Independent director in South Asian Developing countries: The Case of Banking Sector in Bangladesh. BUFT journal of Business and Economics (BJBE). ISSN (Print) 2664-9942, Volume 3 (2022)

Chowdhury, M.A.I. Uddin, M.S., (Corresponding Author) (2021). ”Artificial Intelligence and Islamic Finance: Practical Applications for Financial Risk Management”. In: Abd Manaf A., Zeki A., Zamani M., Chuprat S., El-Qawasmeh E. (eds) Artificial Intelligence and Islamic Finance: Practical Applications for Financial Risk Management, Routledge publisher. 9781003171638. https://www.routledge.com/.../Sarea.../p/book/9780367774851.

Uddin, M.S. (2021). Machine Learning in Credit Risk Modeling: Empirical Application of Neural Network Approaches”. In: The Fourth Industrial Revolution: Implementation of Artificial Intelligence for Growing Business Success (SCI), Springer, UK, ISBN: 978-3-03062796-6-25.

Hossain.M.N., Preventive Behavior and Technology Anxiety: The impact of Zoom application on University Education (2021). Journal of Army Institute of Business Administration (AIBA, Savar), Army Printing Press, Vo.02, Issue 1, ISSN: 27087069.

Hossain, M.N., Cultural factors determining the adoption of m learning on adult learners: Evidence from Bangladesh (2021). Journal of Business and Economics, UITS (University of Information Technology & Sciences) Research Center, Dhaka. Vol.02, Issue 1.

Islam, M. A., Hossain, M. N., Khan, M. A., Hasan, M. R., & Hassan, M. R. (2021). Financial development and foreign direct investment nexus: A systematic review of literature. International Journal of Research in Business and Social Science (2147- 4478), 10(4), 226–238. Scopus (Q3). https://doi.org/10.20525/ijrbs.v10i4.1213

Ikra, S. S., Rahman, M. A., Wanke, P., & Azad, M. A. K. (2021). Islamic banking efficiency literature (2000–2020): a bibliometric analysis and research front mapping. International Journal of Islamic and Middle Eastern Finance and Management. Online published June 7, 2021 [Indexed in WoS and Scopus]

Block Chain Technology in Smart Healthcare- A Bibliometric Study. Naznin Akther and Dr. Goalm Sorwar. Presented at the AI Health 2021 Conference (AI in Healthcare Symposium) organized by Southern Cross University, Australia on 27th May 2021.

Exploration of Influential Factors for Intention to Use Service Robots in Healthcare Sector amid Aging Population in Bangladesh. Naznin Akther. Presented at the AI Health 2021 Conference (AI in Healthcare Symposium) organized by Southern Cross University, Australia on 27th May 2021.

Raihan, M.Z. & Azad, M.A.K. "A Bibliometric Review on Outcome-Based Learning for Graduate Employability: Mapping the Research Front" Journal of Education, First Published May 23, 2021, https://doi.org/10.1177/00220574211016444 [Indexed in WoS, Scopus]

Mumu, J. R., Saona, P., Mamun, M. A. A. & Azad, M. A. K. (2021), "Is Trust Gender Biased? A Bibliometric Review of Trust in E-Commerce", Journal of Internet Commerce, pp. 1-29, online published May 22, 2021. http://doi.org/10.1080/15332861.2021.1927437 [Indexed in WoS, Scopus, ABDC]

Zhou, Y., Uddin, M.S., Habib, T., Chi, G., Yuan, K. (2021). Feature selection in credit risk modeling: an international evidence. Economic Research-Ekonomska Istraživanja (SSCI, Q2, IF- 2.229). WOS Accession Number: 00060829410001. https://doi.org/10.1080/1331677X.2020.1867213.

Tahmid, T., Mumu, J. R., Hassan, K. M., & Azad, A. K. (2021). What did We Miss? A Bibliometric Review of Electronic Human Resource Management and Research Agenda. Journal of Economic Cooperation & Development, 42(4), 79-107

Al Mamun, M. A., Hassan, M. K., Azad, M. A. K., & Rashid, M. (2021). A hybrid review of islamic pricing literature. The Singapore Economic Review, online published. https://doi.org/10.1142/S0217590821420029 [Indexed in WoS, Scopus, ABDC]

Mahal, I., Munira, S. and Rahman, B. (2021). Customers Attitude towards Emerging and Established Commercial Banks in Bangladesh: An Insight of Client Perception. The Cost and Management, 49(1), 35-40.

Jiisun, M. S. H., Rupa, R. A., Chowdhury, M. H., Mushrofa, H., & Hoque, M. R. (2021). Blood donation systems in Bangladesh: Problems and remedy. International Journal of Business and Management, 14(8), 145-145.

Revisiting the Impact of Mobile Banking in Financial Inclusion Among the Developing Countries, International Journal of Financial Research

2020 (174)

Mechanical and Production Engineering

Zahin Mostakim, Nagib Mehfuz, Moaz Ebon Zabal, Kaisar Ahammed Sajib, Md. Zahid Hossain, Comparison of Vibration Analysis among NACA Airfoil Wings Based on Natural Frequencies, International Conference on Mechanical, Industrial and Energy Engineering, 19-21 December, 2020, Khulna

Zahin Mostakim, Nagib Mehfuz, Moaz Ebon Zabal, Kaisar Ahammed Sajib, Md. Zahid Hossain, “Comparison of Vibration Analysis among NACA Airfoil Wings Based on Natural Frequencies”, International Conference on Mechanical, Industrial and Energy Engineering 2020 19-21 December, 2020, Khulna, BANGLADESH

Taskin Jamal, Sayedus Salehin, “Hybrid renewable energy sources power systems” in Ersan Kabalcı eds. ‘Hybrid Renewable Energy Systems and Microgrids’’, Academic Press (November 2020) [https://www.sciencedirect.com/science/article/pii/B9780128217245000106]

Journal paper: 84 Book section: 08 Conference paper:128 patent granted: 01

MF Diba, MR Karim, J Naser, Numerical modelling of a bubbling fluidized bed combustion: A simplified approach, Fuel (2020), Vol. 277, pp. 118170. DOI: https://doi.org/10.1016/j.fuel.2020.118170 (Impact Factor: 7.4, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Sarkar, M.,Hasanuzzaman, M., Gulshan, F., and Rashid, A., Surface, Mechanical and Shape Memory Properties of Biodegradable Polymers and Their Applications, Reference Module in Materials Science and Materials Engineering, Elsevier; pp.1-8, 2020. https://doi.org/10.1016/B978-0-12-820352-1.00050-X

MF Diba, MR Karim, J Naser, Fluidized bed CFD using simplified solid-phase coupling, Powder Technology (2020), Vol. 375, pp.161-173. DOI: https://doi.org/10.1016/j.powtec.2020.07.074 (Impact Factor: 5.2, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Md. Abdul Karim Miah, Shorab Hossain, Sayedus Salehin, “Effects of severity and dominance of viscous force on stenosis and aneurysm during pulsatile blood flow using computational modeling”, CFD Letters 12 (8), 35-54, Akademia Baru (August 2020) [https://doi.org/10.37934/cfdl.12.8.3554]

Md. Abdul Karim Miah, Shorab Hossain, Sayedus Salehin. “Effects of Severity and Dominance of Viscous Force on Stenosis and Aneurysm During Pulsatile Blood Flow Using Computational Modelling”.CFD Letters. vol. 12, Issue 8(2020) 35-54

A K Azad, Md Moinuddin Shuvo, Rabiul Hasan Kabir, Khan Md. Rabbi, M F Karim, M M Rahman, “Heat transfer augmentation in a diamond shaped enclosure utilizing CNT water Nanofluid”, International Communications in Heat and Mass Transfer, July 2020, Vol. 116_104647, https://doi.org/10.1016/j.icheatmasstransfer.2020.104647

Md Shahnar Islaml, Fahim Mahmud Khan and Md Zahid Hossain "Vibration Reduction of an Excavator Bucket Using Attachment Technique" Journal of International Review of Mechanical Engineering vol. 14(7) pp 414-423, 2020

Md. Abdul Aziz Bhuiyan, Mehedi Hasan Bhuiyan, Md. Ashiqur Rahman, Md. Atreher Abir Mahin, Nagib Mehfuz, Sayedus Salehin, “Economic Assessment of a Concrete and Floating Based Solar Chimney Power Plant in Bangladesh for Renewable Power generation" , IEEE Region 10 Symposium (TENSYMP), Dhaka, Bangladesh June-2020

Md. Abdul Aziz Bhuiyan, Mehedi Hasan Bhuiyan, Md. Ashiqur Rahman, Md. Atrehar Abir, Nagib Mehfuz, Sayedus Salehin, “Economic Assessment of Concrete and Floating Based Solar Chimney Power Plants in Bangladesh”, IEEE Region 10 Symposium (TENSYMP) 2020, 05-07 June, 2020, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/9230846]

F. Ahmed & A. Rashid, Framework to select vital product design methodologies using a multi-criteria decision tool for an industry segment, Journal of Advances in Materials and Processing Technologies, pp.1-9, 2020. https://doi.org/10.1080/2374068X.2020.1783945

Nagib Mehfuz, Abu Shaid Sujon, "Time domain approach to identify the system properties of a coupled structure", International Journal of Scientific and Engineering Research, Volume 11, Issue 3, March-2020

Awais M, Saad M, Ayaz H, Ehsan M, Bhuiyan AA, Computational Assessment of Nano-Particulate (Al2O3/Water) Utilization for Enhancement of Heat Transfer with varying straight section lengths in a Serpentine Tube Heat Exchanger. Thermal Science and Engineering Progress, Elsevier. 2020:100521.

M. R. Uddin, T. S. Saniat, S. Salehin, M. H. Rahman, Drag Based Aerodynamic Braking System for the Hyperloop: A Numerical Study. Transactions of the Canadian Society for Mechanical Engineering, 2020. doi:10.1139/tcsme-2019-0120.

Mohammed Raihan Uddin, Tahsin Sejat Saniat, Sayedus Salehin, Md. Hamidur Rahman, “Drag Based Aerodynamic Braking System for the Hyperloop: A Numerical Study”, Transactions of the Canadian Society for Mechanical Engineering, Vol. 45 (1), pp: 1-10, Canadian Science Publishing (February 2020) [https://cdnsciencepub.com/doi/abs/10.1139/tcsme-2019-0120]

Abu Shaid Sujon, Nagib Mehfuz, Mohammad Ahsan Habib "Experimental and numerical investigation on the tensile and water absorption behavior of jute/carbon reinforced epoxy composite", International Journal of Mechanical Engineering and Technology, Volume 11, Issue 2, Feb.-2020

MR Karim, AA Bhuiyan, AAR Sarhan, J Naser, CFD simulation of biomass thermal conversion under air/oxy-fuel conditions in a reciprocating grate boiler, Renewable Energy (2020), Vol. 146, pp.1416-1428. DOI: https://doi.org/10.1016/j.renene.2019.07.068 (Impact Factor: 8.7, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

A K Azad, M. M. Rahman, Salma Parvin, Mahtab Uddin and M. R. Islam, “Effect of Joule Parameter on MHD Mixed Convection in an Open Channel with Semi-Circular Heater on the Bottom Wall”, ARPN Journal of Engineering and Applied Sciences, 2020, Vol. 15, pp 113-121, http://www.arpnjournals.org/jeas/research_papers/rp_2020/jeas_0120_8074.pdf.

Uddin, Mohammed Raihan, et al. "Drag Based Aerodynamic Braking System for the Hyperloop: A Numerical Study." Transactions of the Canadian Society for Mechanical Engineering ja (2020).

M. Awais, M. Saad, Hamza Ayaz, M. M. Ehsan, Arafat A. Bhuiyan, Computational Assessment of Nano-Particulate (Al2O3/Water) Utilization for Enhancement of Heat Transfer with varying straight section lengths in a Serpentine Tube Heat Exchanger, Thermal Science and Engineering Progress, 100521, 2020.

R. H., Ahmad, Arafat A. Bhuiyan, Xu, F., Sujon, A. S., Karim, M. R., Moin, E. H., & Islam, A. S, Comparative analysis of refrigerant performance between LPG and R134a under subtropical climate. Journal of Thermal Analysis and Calorimetry, 139(4), 2925-2935., 2020.

MR Karim, Arafat A. Bhuiyan, AAR Sarhan, J Naser, CFD simulation of biomass thermal conversion under air/oxy-fuel conditions in a reciprocating grate boiler, Renewable Energy, vol. 146: p. 1416-1428, 2020.

M Monjurul Ehsan, Zhiqiang Guan, Hal Gurgenci, and Alexander Klimenko. "Feasibility of dry cooling in supercritical CO2 power cycle in concentrated solar power application: Review and a case study." Renewable and Sustainable Energy Reviews 132 (2020): 110055. Impact factor-12.34. SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S1364032120303464

M Monjurul Ehsan, Zhiqiang Guan, Hal Gurgenci, A Y Klimenko, “Novel Design Measures for Optimizing the Yearlong Performance of a Concentrating Solar Thermal Power Plant using Thermal Storage and a Dry-Cooled Supercritical CO2 Power Block”, Energy Conversion and Management 216 (2020): 112980. Impact Factor- 8.21, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890420305240

M Monjurul Ehsan, Sam Duniam, Jishun Li, Zhiqiang Guan, Hal Gurgenci, A Y Klimenko, “A Comprehensive Thermal Assessment of Dry Cooled Supercritical CO2 Power Cycles”, Applied Thermal Engineering 166 (2020): 114645. Impact Factor- 4.72, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S1359431119339468

Awais, M, M Saad, Hamza Ayaz, M Monjurul Ehsan, Arafat A Bhuiyan. "Computational Assessment of Nano-Particulate (Al2O3/Water) Utilization for Enhancement of Heat Transfer with varying straight section lengths in a Serpentine Tube Heat Exchanger." Thermal Science and Engineering Progress (2020): 100521. Impact factor-4.40. SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S2451904920300421

M Maharof, Z Jamaludin, M Minhat, NA Anang, and TH Chiew, 2020. Force Compensation for Precise Positioning in Machine Tools via State Observer Design. The International Journal of Advanced Manufacturing Technology, 82(9-12), pp. 1693-1705.

Electrical and Electronic Engineering

M. F. Hassan, I. Tathfif, M. Radoan and R. H. Sagor, "A Concentric Double-Ring Resonator Based Plasmonic Refractive Index Sensor with Glucose Sensing Capability," 2020 IEEE REGION 10 CONFERENCE (TENCON), 2020, pp. 91-96, doi: 10.1109/TENCON50793.2020.9293901.

Mirza Muntasir Nishat, Md. Rafid Kaysar Shagor, Hafsa Akter, Sayka Afreen Mim and Fahim Faisal, “An Optimal Design of PID controller for DC-DC Zeta converter using Particle Swarm Optimization.” 23rd International Conference on Computer and Information Technology (ICCIT), IEEE, 2020.

A. B. Siddik, M. M. Billah, S. Lee, Y. J. Cho, S. Kang, S. Jang, J. Park, T. Lee, and J. Jang, Blue Laser Annealed Sub-Micron Channel P-Type Low-Temperature Poly-Si TFT Without Kink Effect for High-Resolution Display. IEEE Electron Device Letters 42(2), 172-175, 2021. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

Mohammad Rakibul Islam, Md Moinul Islam Khan, Fariha Mehjabin, Jubair Alam Chowdhury and Mohibul Islam, “Design of a Fabrication Friendly and Highly Sensitive SPR based PCF biosensor”, Results in Physics, December 2020. [SCI indexed, JCR Impact Factor: 4.019]

Gulam Mahfuz Chowdhury, Md. Mahedi Hasan, Asif Ahmed, Md. Wahid Tousif Rahman, Md. Taslim Reza (2020). "Effective Strain Image Sequence Selection by Using Semi-Automated Image Processing Technique.", GUB Journal of Science and Engineering, Volume-7, Issue-1, Page-08-13, Dec 2020.

M.D. Rahman, F.S. Haq, M.B. Mahboob, S.Ali and G.Sarowar, "High-Efficiency Single Phase Passive LC3 Component AC-DC Buck-Boost Converter", 2020 2nd International Conference on Advanced Information and Communication Technology (ICAICT), Dhaka, Bangladesh, 2020, pp. 325-329, doi: 10.1109/ICAICT51780.2020.9333459

Rabiul Al Mahmud, Md Omar Faruque, and Rakibul Hasan Sagor. "A highly sensitive plasmonic refractive index sensor based on triangular resonator." Elsevier: Optics Communications 483 (2021): 126634.

Md. Saiful Islam Sumon, Md. Omar Sharif, A.B.M Rafid Anwar, Shadman Shahriar Mahmud, Rakibul Hasan Sagor, “Theoretical Investigation of a GaAs Based Novel Air Slot Nano-Plasmonic Coupler”, 2020 IEEE Region 10 Symposium (TENSYMP), 5-7 June 2020, Dhaka, Bangladesh

M. H. Rabbi, M. M. Billah, A. B. Siddik, S. Lee, J. Lee, and J. Jang, Extremely Stable Dual Gate Coplanar Amorphous InGaZnO Thin Film Transistor With Split Active Layer by N2O Annealing. IEEE Electron Device Letters 41(12), 1782-1785, 2020. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

Mohammad Rakibul Islam, Farhana Akter Mou, Md. Moshiur Rahman and Mohammed Imamul Hassan Bhuiyan, “Hollow Core Photonic Crystal Fiber for Chemicals sensing in Liquid Analytes”, International Journal of Modern Physics B, October 2020. [SCIE indexed, JCR Impact Factor: 0.833]

Md. Aminul Islam, Mohammad Rakibul Islam, Ahmed Mujtaba Al Naser, Fariha Anzum and Fatema Zerin Jaba, “Square Structured Photonic Crystal Fiber based THz Sensor Design for Human Body Protein Detection”, Journal of Computational Electronics, October 2020. [SCIE indexed, JCR Impact Factor: 1.532]

Ali Kadivar, Kaveh Niayesh, Nina Støa-Aanensen and Fahim Abid, ''Metal vapor content of an electric arc initiated by exploding wire in a model N2 circuit breaker: Simulation and experiment'', Journal of Physics D: Applied Physics, 2020, vol. 54(5), p.055203.

Mirza Muntasir Nishat, Fahim Faisal, Anik Jawad Evan, Md Moshiour Rahaman, Md Sadman Sifat, and HM Fazle Rabbi, "Development of Genetic Algorithm (GA) Based Optimized PID Controller for Stability Analysis of DC-DC Buck Converter." Journal of Power and Energy Engineering, vol. 8 no. 9 (2020): 8-19 [SCOPUS, WoS]

Al Mehadi, Abdullah, Misbahul Alam Chowdhury, Mirza Muntasir Nishat, Fahim Faisal, and Md Minhajul Islam. "Design, simulation and analysis of monofacial solar pv panel based energy system for university residence: a case study." IOP Materials Science and Engineering, vol. 1045, no. 1, p. 012011. IOP Publishing, 2020.

Faisal, Fahim, Mirza Muntasir Nishat, Sayka Afreen Mim, Hafsa Akter, and Md Rafid Kaysar Shagor. "Investigative analysis of match-line sensing schemes in TCAM for high-speed performance." IOP Materials Science and Engineering, vol. 1045, no. 1, p. 012040. IOP Publishing, 2020.

H. Lee, S. Lee, Y. Kim, A. B. Siddik, M. M. Billah, J. Lee, and J. Jang, Improvement of stability and performance of amorphous indium gallium zinc oxide thin-film transistor by zinc-tin-oxide spray coating. IEEE Electron Device Letters 41(10), 1520-1523, 2020. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

Md. Saiful Islam Sumon , Sheikh Montasir Mahbub , Md. Sami Imtiaz, Rakibul Hasan Sagor, “Air Gap Based Novel Rectangular Nano Plasmonic Coupler Design and Analysis”, 2020 IEEE International Conference on Semiconductor Electronics (ICSE), DOI : 10.1109/ICSE49846.2020.9166890

Md. Farhad Hassan, Rakibul Hasan Sagor, Infiter Tathfif, Kazi Sharmeen Rashid, and Mohammed Radoan. "An Optimized Dielectric-Metal-Dielectric Refractive Index Nanosensor". IEEE Sensors Journal (I.F= 3.076). 2020 Aug 13. http://dx.doi.org/10.1109/JSEN.2020.3016570

J. K. Saha, R. N. Bukke, M. M. Hasan, Y. G. Kim, M. N. Islam, N. N. Mude, M. M. Billah, and J. Jang, Mechanical Bending Test of High Mobility ZnO TFTs on PI Substrate by Spray Pyrolysis, In Proc. SID Display Week Symposium Digest of Technical Papers 51(1), 1829, 2020, San Francisco, California, USA.

Fahim Abid, Kaveh Niayesh, Egil Viken, Nina Aanensen, Erik Jonsson, and Hans Kristian Meyer, ''Effect of filling pressure on post-arc gap recovery of N2. IEEE Transactions on Dielectrics and Electrical Insulation,Vol. 27, 2020, p.p. 1339 - 1347

Q. N. U. Islam, S. M. Abdullah, and M. A. Hossain: `Optimized Controller Design for an Islanded Microgrid using Non-dominated Sorting Sine Cosine Algorithm (NSSCA)', Engineering, Technology and Applied Science Research, 2020, 10, (4), pp. 6052-6056. doi: 10.48084/etasr.3468

S. M. Abdullah, A. Ahmed, and Q. N. U. Islam: `Nature-inspired Hybrid Optimization Algorithms for Load Flow Analysis of Islanded Microgrids', Journal of Modern Power Systems and Clean Energy, 2020, 8, (6), pp. 1250-1258. doi: 10.35833/MPCE.2019.000317

Fahim Abid, ''Characteristics of Switching Arc in Ultrahigh-pressure Nitrogen'', Norwegian University of Science and Technology, Ph.D. thesis, 2020

M. M. Islam, J. K. Saha, R. N. Bukke, M. M. Hasan, M. M. Billah, N. N. Mude, A. Ali, and J. Jang, Solution-Processed La Alloyed ZrOx High-k Dielectric for High-Performance ZnO Thin-Film Transistors. IEEE Electron Device Letters 41(7), 1021-1024, 2020. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

S. M. Abdullah, and A. Ahmed: `Hybrid Bare Bones Fireworks Algorithm for Load Flow Analysis of Islanded Microgrids': `Handbook of Research on Fireworks Algorithms and Swarm Intelligence' (IGI Global, 2020), pp. 283-314. doi: 10.4018/978-1-7998-1659-1.ch013

J. K. Saha, M. M. Billah, R. N. Bukke, Y. G. Kim, N. N. Mude, A. B. Siddik, M. M. Islam, Y. Do, M. Choi, and J. Jang, Highly Stable, Nanocrystalline, ZnO Thin-Film Transistor by Spray Pyrolysis Using High-K Dielectric. IEEE Transactions on Electron Devices 67(3), 1021-1026, 2020. [SCIE Q1 indexed, JCR Impact Factor: 2.917].

Fahim Abid, Kaveh Niayesh, Nina Støa-Aanensen, "Current Interruption Performance of Ultra-high Pressure Nitrogen Arc," Journal of Physics D, Volume 53, Number 18, 2020

Faruque, Md Omar, Rabiul Al Mahmud, and Rakibul Hasan Sagor. "CMOS Compatible Plasmonic Refractive Index Sensor based on Heavily Doped Silicon Waveguide." Engineering, Technology & Applied Science Research 10, no. 1 (2020): 5295-5300.

Md Omar Faruque, Rabiul Al Mahmud, and Rakibul Hasan Sagor. "CMOS Compatible Plasmonic Refractive Index Sensor based on Heavily Doped Silicon Waveguide." Engineering, Technology & Applied Science Research 10, no. 1 (2020): 5295-5300.

Md. Farhad Hassan, Md. Moudud Hasan, Mohammed Radoan, and Rakibul Hasan Sagor. “Design and performance analysis of an ultra-compact nano-plasmonic refractive index sensor,” in 2020 8th International Electrical Engineering Congress (iEECON), pp. 1–5, IEEE, 2020. doi: 10.1109/iEECON48109.2020.229582

M. Rezaul Hoque Khan, M. Ashraful Hoque, M. Taslim Reza, M. Saifur Rahman (2020). "Performance Analysis of MC-CDMA Based UWB System for Beyond 4G", International Journal of Mathematics and Computer Science, Volume-3, Page-933-944.

M.R.H. Khan, M. A. Hoque, M. T. Reza, M. Saifur Rahman (2020). "System Imperfections on the Overall Performance of MC-CDMA Based Cognitive Radio Network (CRN) System." Journal of Circuits, Systems and Computers, Volume-30, No-4.

Md. Farhad Hassan, Md. Moudud Hasan, Md. Istiac Ahmed, and Rakibul Hasan Sagor, "Numerical Investigation of a Plasmonic Refractive Index Sensor Based on Rectangular MIM Topology," 2020 International Seminar on Intelligent Technology and Its Applications (ISITIA), Surabaya, Indonesia, 2020, pp. 77-82. doi: 10.1109/ISITIA49792.2020.9163755. [BEST PAPER AWARD]

Islam, Quazi Nafees Ul, and Ashik Ahmed. "Optimized controller design for islanded microgrid employing nondominated sorting firefly algorithm." In Nature-Inspired Computation and Swarm Intelligence, pp. 247-272. Academic Press, 2020.

S. M. Abdullah, A. Ahmed and Q. N. U. Islam, "Nature-Inspired Hybrid Optimization Algorithms for Load Flow Analysis of Islanded Microgrids," in Journal of Modern Power Systems and Clean Energy, doi: 10.35833/MPCE.2019.000317.

Islam, Quazi Nafees Ul, Saad Mohammad Abdullah, and Md Arif Hossain. "Optimized Controller Design for an Islanded Microgrid using Non-dominated Sorting Sine Cosine Algorithm (NSSCA)." Engineering, Technology & Applied Science Research 10, no. 4 (2020): 6052-6056.

Islam, Mohammad Rakibul, Md Arif Hossain, Khandoker Md Abu Talha, and Rezoana Karim Munia. "A novel hollow core photonic sensor for liquid analyte detection in the terahertz spectrum: design and analysis." Optical and Quantum Electronics 52, no. 9 (2020): 1-14.

Quazi Nafees Ul Islam, Saad Mohammad Abdullah, Md. Arif Hossain, "Optimized controller design for an islanded microgrid using Non-dominated Sorting Sine Cosine Algorithm (NSSCA)," Engineering, Technology Applied Science Research, eISSN: 1792-8036, pISSN:2241-4487, Vol. 10, No. 4, pp. 6052–6056, 2020(August).

Md. Saiful Islam Sumon, Sheikh Montasir Mahbub, Md. Sami Imtiaz, Rakibul Hasan Sagor, “Air Gap Based Novel Rectangular Nano Plasmonic Coupler Design and Analysis”, 2020 IEEE International Conference on Semiconductor Electronics (ICSE), KL, Malaysia

Md. Saiful Islam Sumon, Nowshed Al Nur Hridoy, Anas Mahmood, Rakibul Hasan Sagor, "Designing GaAs Based Semi-Elliptical Nano Plasmonic Coupler with Analytical Assessment", 2020 3rd International Conference on Mechanical, Electronics, Computer, and Industrial Technology (MECnIT), Medan, Indonesia

Rakibul Hasan Sagor, Md. Farhad Hassan, Ahmad Azuad Yaseer, Ehsanuzzaman Surid & Md. Istiac Ahmed . "Highly sensitive refractive index sensor optimized for blood group sensing utilizing the Fano resonance". Applied Nanoscience (I.F = 2.88) . 2020 Nov 25:1-4. https://doi.org/10.1007/s13204-020-01622-5

Rakibul Hasan Sagor, Md. Farhad Hassan, Sabiha Sharmin, Tasnim Zaman Adry, and Arefin Rabbi Emon. "Numerical Investigation of an Optimized Plasmonic On-Chip Refractive Index Sensor for Temperature and Blood Group Detection". Results in Physics (I.F=4.019). 2020 Nov 25:103611. https://doi.org/10.1016/j.rinp.2020.103611

Md. Farhad Hassan, Infiter Tathfif, Mohammed Radoan, & Rakibul Hasan Sagor. (2020, November). A Concentric Double-Ring Resonator Based Plasmonic Refractive Index Sensor with Glucose Sensing Capability. In 2020 IEEE REGION 10 CONFERENCE (TENCON) (pp. 91-96). Osaka, Japan, IEEE. https://doi.org/10.1109/TENCON50793.2020.9293901 [BEST PAPER AWARD]

Md. Farhad Hassan, Md. Saiful Islam Sumon, Md. Moudud Hasan, Md. Arefin Rabbi Emon, Rakibul Hasan Sagor. "Design and Analysis of a Highly Efficient Rectangular Cavity Based Semi-Elliptic Nanoplasmonic Coupler," 2020 IEEE 8th R10 Humanitarian Technology Conference (R10-HTC),Kuching, Malaysia, 2020, pp. 1-6, doi: 10.1109/R10 HTC49770.2020. 9356998.

Afzalonnisa, Shajada Akter Khanam, Md. Riad Hossain, Md. Farhad Hassan, "A Cross-sectional Study on Awareness and Correlating Factors Towards COVID-19 among Adult Women in Dhaka City," 2020 IEEE 8th R10 Humanitarian Technology Conference (R10-HTC), Kuching, Malaysia, 2020, pp. 1-6, doi: 10.1109/R10-HTC49770.2020.9357004.

Khan, M. R. H. and M. A. Hoque (2020). "Highly Stable Photonic Local Carriers for Phased Array Receiver System." Engineering, Technology & Applied Science Research 10(5).

Khan, M. R. H., M. A. Hoque, et al. (2020). "Internet of Things (IoT) for MC-CDMA Based Cognitive Radio Network (CRN) in 5G: Performance Results." J. of Information & Knowledge Management(special issue on IoT).

Khan, M. R. H., M. A. Hoque, et al. (2020). "Performance Analysis of MC-CDMA Based UWB System for Beyond 4G." International Journal of Mathematics and Computer Science 15(3): 933–944.

Khan, M. R. H., M. A. Hoque, et al. (2020). "System Imperfections on the Overall Performance of MC-CDMA-Based Cognitive Radio Network (CRN) System." Journal of Circuits, Systems and Computers 1(1): 2150057

Md. Asfi-Ar-Raihan Asif, Mirza Muntasir Nishat, Fahim Faisal, Md. Fahim Shikder, Mahmudul Hasan Udoy, Rezuanur Rahman Dip and Ragib Ahsan, “Computer Aided Diagnosis of Thyroid Disease using Machine Learning Algorithms.” 11th International Conference on Electrical and Computer Engineering (ICECE), IEEE, 2020.

Nahid Hossain Taz, Abrar Islam, Mirza Muntasir Nishat, and Fahim Faisal. "Modeling and Simulation of Piezoelectric Energy Harvesting Device in Vehicle Suspension System." In 2020 2nd International Conference on Sustainable Technologies for Industry 4.0 (STI), IEEE, 2020.

Mirza Muntasir Nishat, Fahim Faisal, Rezuanur Rahman Dip, Md Fahim Shikder, Ragib Ahsan, Md Asfi-Ar-Raihan Asif, and Mahmudul Hasan Udoy. "Performance Investigation of Different Boosting Algorithms in Predicting Chronic Kidney Disease." In 2020 2nd International Conference on Sustainable Technologies for Industry 4.0 (STI), IEEE, 2020.

Technical and Vocational Education

F. A. Haolader. 'Engineering Pedagogy for the Professional Development of Teachers in Engineering Education: Current trends in Bangladesh'. International Online Alumni Workshop "Engineering Education and Entrepreneurship for Sustainable Development" organized by the Technische Universitat Dresden, the Universitat Leipzig and DAAD held on 1st December 2020.

Khan, M. S. H. (2020). Prospects & Challenges in Skills Devolvement of Bangladesh: A Qualitative Investigation, Paper presented at International Conference on Skills Readiness for Achieving SDGs & Adopting IR 4.0 organize by Institution of Diploma Engineers, Bangladesh (IDEB) & Colombo Plan Staff College (CPSC), Manila, at Dhaka, Bangladesh, 02-04, February, 2020.

Sha, U., Khan, M. S. H., Reynolds, M (2020) Insights into variation in teachers' conceptions of ICT use; a phenomenographic exploration in a Pakistani higher education context, Technology, Pedagogy and Education, 29 (5), 541-555 (SSCI Journal) Impact Factor: 3.8

Presented a theme paper titled 'Teacher Education for TVET in Bangladesh: Qualification Requirements, Deficits and Current Initiatives'. International Conference on 'Skills Readiness for Achieving SDGs & Adopting IR 4.0' held on 2-4 February 2020 in Dhaka, BD.

Al Mamun, M. A., Lawrie, G., & Wright, T. (2020). Instructional design of scaffolded online learning modules for self-directed and inquiry-based learning environments. Computers & Education, 144, 103695. https://doi.org/10.1016/j.compedu.2019.103695

Hasan, M., & Khan, M. S. H. (2020). The Role of Skill Training in Socio-Economic Development in Developing Countries. In Socio-Economic Perspectives on Vocational Skill Development: Emerging Research and Opportunities (pp. 141-162): IGI Global

Computer Science and Engineering

Kabir, K. Habibul, Ashraful Alam Khan, Ashir Ahmed, Masahiro Sasabe, and Khondaker Hasibul Kabir. 2020. "AsthaNet: Co-Creating Network Solution for Socio-Economic Development of Disconnected Communities". International Journal of Humanitarian Technology 1 (2): 172-209. Inderscience Publishers. doi:10.1504/ijht.2020.10034657.

MF Rabbi, SMM Hasan, AI Champa, M AsifZaman, MK Hasan. Prediction of Liver Disorders using Machine Learning Algorithms: A Comparative Study. 2020 2nd International Conference on Advanced Information and Communication Technology (ICAICT).

R. Kushol, M. H. Kabir, M. Abdullah-Al-Wadud, and M. S. Islam, “Retinal blood vessel segmentation from fundus image using an efficient multiscale directional representation technique Bendlets,” Math. Biosci. Eng., vol. 17, no. 6, pp. 7751–7771, 2020. [SCIE]

Kushol, Rafsanjany, Md Hasanul Kabir, M. Abdullah-Al-Wadud, and Md Saiful Islam. "Retinal blood vessel segmentation from fundus image using an efficient multiscale directional representation technique Bendlets." Mathematical Biosciences and Engineering 17, no. 6 (2020): 7751-7771.

Faisal Muhammad Shah, Farzad Ahmed, Sajib Kumar Saha Joy, Sifat Ahmed, Samir Sadek, Rimon Shil, and Md Hasanul Kabir, “Early depression detection from social network using deep learning techniques,” in IEEE Region 10 Symposium (TENSYMP), 2020, pp. 823-826.

Kushol, Rafsanjany, and Md Sirajus Salekin. "Rbvs-net: A robust convolutional neural network for retinal blood vessel segmentation." In 2020 IEEE International Conference on Image Processing (ICIP), pp. 398-402. IEEE, 2020.

Mohammad Sabik Irbaz, Abir Azad, Tanjila Alam Sathi, and Lutfun Nahar Lota,"Nurse care activity recognition based on machine learning techniques using accelerometer data", In Adjunct Proceedings of the 2020 ACM International Joint Conference on Pervasive and Ubiquitous Computing and Proceedings of the 2020 ACM International Symposium on Wearable Computers (UbiComp-ISWC '20). Association for Computing Machinery, New York, NY, USA, 402–407.http://dx.doi.org/10.1145/3410530.3414339

Mohsinul Kabir, Quazi Fahim Faisal Dhruba, Hasan Mahmud, Md Kamrul Hasan, Ahsan Rejwan Zaman, "Gaming Insight: Conversion of Popular Sedentary Games into Motion-Based Form", International Journal of Human–Computer Interaction, Taylor & Francis, Volume 36, Issue 13, Pages 1205-1215, 8 August 2020, doi: 10.1080/10447318.2020.1726597 [SCI/SCIE/SSCI Web of Science, IF 4.920] [Q1: Human Factors and Ergonomics]

Fazle Rabbi, Md. Nazmul Haque, Md. Eusha Kadir, Md. Saeed Siddik and Ahmedul Kabir, "An Ensemble Approach to Detect Code Comment Inconsistencies using Topic Modeling”,The 32nd International Conference on Software Engineering and Knowledge Engineering, SEKE 2020, KSIR Virtual Conference Center, USA, July 9-19, 2020.

Kabir, M., Dhruba, Q.F., Mahmud, H., Hasan, M.K., & Zaman, A.R. (2020). Gaming Insight: Conversion of Popular Sedentary Games into Motion-Based Form. International Journal of Human–Computer Interaction, 36, 1205 - 1215.

Md Nazmul Haque, Sadia Sharmin, Amin Ahsan Ali, Abu Ashfaqur Sajib, Mohammad Shoyaib. "Use of relevancy and complementary information for discriminatory gene selection from high-dimensional gene expression data". PLOS ONE 16(10): e0230164. https://doi.org/10.1371/journal.pone.0230164

Ahmed Al Marouf, Md Kamrul Hasan, Hasan Mahmud, "Comparative analysis of feature selection algorithms for computational personality prediction from social media", IEEE Transactions on Computational Social Systems, Volume 7, Issue 3, Pages 587-599, 19 February, 2019, 10.1109/TCSS.2020.2966910 [SCIE/Web of Science IF 5] [Q1: Human-Computer Interaction]

Ahmed, T., Rahman, A., Chowdhury, T.M., Kushol, R., & Raihan, M.A. (2020). A Novel Approach to Classify Electrocardiogram Signals Using Deep Neural Networks. 2020 2nd International Conference on Computer and Information Sciences (ICCIS), 1-6.

Puloma Roy, Sadia Sharmin, Amin Ahsan Ali, Mohammad Shoyaib . Discretization and Feature Selection Based on Bias Corrected Mutual Information Considering High-Order Dependencies. In Pacific-Asia Conference on Knowledge Discovery and Data Mining, 2020

Md Eusha Kadir, Pritom Saha Akash, Sadia Sharmin, Amin Ahsan Ali, Mohammad Shoyaib . A Proximity Weighted Evidential k Nearest Neighbor Classifier for Imbalanced Data. In Pacific-Asia Conference on Knowledge Discovery and Data Mining, 2020

Md Nazmul Haque, Sadia Sharmin, Amin Ahsan Ali, Abu Ashfaqur Sajib, Mohammad Shoyaib . Use of relevancy and complementary information for discriminatory gene selection from high-dimensional cancer data. In bioRxiv, 2020

A Novel Approach to Classify Electrocardiogram Signals Using Deep Neural Networks - Tasnim Ahmed, Ariq Rahman, Tareque Mohmud Chowdhury, Rafsanjany Kushol, Md. Nishat Raihan - 2020 International Conference on Computer and Information Sciences (ICCIS)

Rasul, Md Golam, Mashrur Hossain Khan, and Lutfun Nahar Lota. "Nurse care activity recognition based on convolution neural network for accelerometer data." Adjunct Proceedings of the 2020 ACM International Joint Conference on Pervasive and Ubiquitous Computing and Proceedings of the 2020 ACM International Symposium on Wearable Computers. 2020.

Irbaz, Mohammad Sabik, et al. "Nurse care activity recognition based on machine learning techniques using accelerometer data." Adjunct Proceedings of the 2020 ACM International Joint Conference on Pervasive and Ubiquitous Computing and Proceedings of the 2020 ACM International Symposium on Wearable Computers. 2020.

Hossain Md Azam, Baseem Al-Atwari, Jik-Soo Kim, and Soonwook Hwang. " Exploring the Volatility of Large-Scale Shared Distributed Computing Resources." Proceedings of?International Conference on Smart Computing and Cyber Security: Strategic Foresight, Security Challenges and Innovation, Springer Lecture Notes in Network and System, v.149, ISBN 978-981-15-7990-5, Republic of Korea, July 07- 08, 2020. (Scopus Indexed)

Civil & Environmental Engineering

Anik, M. A. H, Sadeek, S. N., Hossain, M. and Kabir, S. (2020) A framework for involving the young generation in transportation planning using social media and crowd sourcing, Transport Policy, Vol. 97, pp. 1-18.

Chowdhury, M. E., Islam, M. S., Alam, T., Barua, S., Shahriar, M. S., & Anisa, H. (2020). Infiltration in vegetated soil: Empirical modeling and sensitivity analysis. Modeling Earth Systems and Environment. doi:10.1007/s40808-020-00867-x

Sultana, S., Rouf, K. B. A., Ahmed, S. S., Hossain, M. and Hossain, D. M. (2020) Redesigning the Interiors of Public Buses in Dhaka City: Exploring the Gender based Perceptions and Preferences, Asian Transport Studies. Vol. 6.

Sobhani, M. G., Imtiyaz, M. N., Azam, M. S, and Hossain, M. (2020) A framework for analyzing the competitiveness of unconventional modes of transportation in developing cities, Transportation Research Part A: Policy and Practice, Volume 137, pp.504-518.

AH Mahmood, SJ Foster, A Castel (2020), ‘High-Density Geopolymer Concrete for Port Kembla Breakwater Upgrade’, Construction and Building Materials, 262, 120920.

Mousa, M., Elseifi, M. A., Bashar, M. Z., Zhang, Z., Gaspard, K. (2020). Short and Long-Term Field Performances and Optimal Timing of Chip Seal in Hot and Humid Climates. Transportation Research Record: Journal of the Transportation Research Board.

Mohammed T.U., Harun M.Z.B., Joy J.A., & Ahmed M.A. (2020). Effect of Sand-to-Aggregate Volume ratio on Mechanical Properties of Concrete. In IABSE-JSCE Joint Conference on Advances in Bridge Engineering-IV, August (pp. 45-52).

Bhuiyan, MAA, Rifaat, S. M., Tay, R., DeBarros, A.(2020) Influence of Community Design and Sociodemographic Characteristics on Teleworking. Sustainability 12, 5781. (Web of Science and Scopus Indexed Journal

Sadeek, S. N., Rifaat, S. M. (2020). Development of district-wise crash prediction model in Bangladesh. Cogent Engineering 7 (1), 1762525.(Web of Science and Scopus Indexed Journal)

Kabir, M.I.; Lee, C.K.; Rana, M.M.; Zhang, Y.X., 2020, ‘Flexural Behaviour of ECC-LWC Encased Slender High Strength Steel Composite Beams’, Journal of Constructional Steel Research, vol. 173, 106253, DOI: https://doi.org/10.1016/j.jcsr.2020.106253

Anik, M. A. H., Sadeek, S. N., Hossain, M., and Kabir, S. (2020). A framework for involving the young generation in transportation planning using social media and crowd sourcing. Transport Policy, 97:1-18. https://doi.org/10.1016/j.tranpol.2020.06.006 

1. Mia, M.M.; Kabir, M.I.; Islam, K.; Billah, AHM.M; 2020, ‘Finite element modeling of composite beam with inverted–T steel girder and ultra–high performance concrete slab’, CSCE Annual Conference, Saskatoon, Canada, 27–30 May 2020

AH Mahmood, Stephen J Foster, Arnaud Castel (2020), ‘Development of high-density geopolymer concrete with steel furnace slag aggregate for coastal protection structures’, Construction and Building Materials, 248, 118681.

Kamal, U., Ahmed, S., Toha, T. R., Islam, N., and Islam, A. B. M. A. A., (2020), “Intelligent Human Counting through Environmental Sensing in Closed Indoor Settings”, Mobile Networks and Application (MONET), 25(2), 474-490

Kabir, M.I.; Lee, C.K.; Rana, M.M.; Zhang, Y.X., 2020, ‘Strength enhancement of high strength steel beams by engineered cementitious composites encasement', Engineering Structures, vol. 207, pp. 110288 – 110288, DOI: http://dx.doi.org/10.1016/j.engstruct.2020.110288

Sakib, N., Hajj, R., Hure, R., Alomari, A., & Bhasin, A. (2020). "Examining the relationship between bitumen polar fractions, rheological performance benchmarks, and tensile strength." Journal of Materials in Civil Engineering, 32(6).

Md. Rezaul Karim, Sakib Shadman Prosun and Ahmed Farhan Hahabub (2020). Atatistical analysis of rainfall trend and variability due to climate change in Bangladesh, Proceedings of the 22nd IAHR-APD Congress, 14-17 September, 2020, Sapporo, Japan.

1. Sobhani, M. G., Imtiyaz, M. N., Azam, S. and Hossain, M. (2020). “A Framework for Analyzing the Competitiveness of Unconventional Modes of Transportation in Developing City”. Transportation Research Part A: Policy and Practice

T. Nakai, H.M. Shahin, H. Takahashi, and Y. Toda (2020): Implicit calculation algorithm of Subloading tij model – Part II, Proc. of the 75th Annual Conference of Japan Society of Civil Engineers, Japan.

T. Nakai, H.M. Shahin, H. Takahashi, Y. Toda, T. Okuno, H. Sugiyama & K. Fukutake (2020): Extension of Subloading tij model for describing soil behavior under cyclic loadings, Proc. of the 55th Annual Conference of Japanese Geotechnical Society, Japan, July.

Business and Technology Management

Uddin, M.S., Chi, G., Habib, T., Zhou, Y. (2020). An alternative statistical framework for credit default prediction. Journal of Risk Model Validation (SSCI, IF-0.412, ABS–1*, ABDC–C), Vol.14, No.2, pp. 1-36. WOS Accession Number: 000584985800005, DOI: 10.21314/JRMV.2020.220.

Munira, S. (2020) “Gender Diversity in the Boardroom and the Firm Financial Performance of DSE Listed Companies in Bangladesh”, Global Disclosure of Economics and Business, 9(2), pp. 89-96. doi: 10.18034/gdeb.v9i2.513.

Mamun, M. A. A., Strong, C. A., & Azad, M. A. K. (2020) “Islamic Marketing: A Literature Review and Research Agenda.” International Journal of Consumer Studies. [Indexed in WoS, Scopus, ABDC]

Saona, P., Akther, N., Mamun, M. A. A., & Azad, M. A. (2020). Technologies for Cross-Border E-Commerce. In Hoque, M. R., & Bashaw, R. E. (Eds.), Cross-Border E-Commerce Marketing and Management (pp. 30-53). IGI Global.

Uddin, M.S., Chi, G., Al Janabi, M. A. M., Habib, T. (2020). Leveraging Random Forest in Micro-enterprises Credit Risk Modeling for Accuracy and Interpretability. International Journal of Finance & Economics (SSCI, IF-0.943, ABS 3*, ABDC –B). WOS Accession Number: 000594750300001, https://doi.org/10.1002/ijfe.2346.

Chi, G., Uddin, M.S. (Corresponding Author), Habib, T., Zhou, Y., Islam M. R., Chowdhury M. A. I. (2020). A Comprehensive Study on Hybrid Classifiers for Credit Risk Assessment: Empirical Evidence from Real-World Credit Data. Journal of Risk Model Validation (SSCI, IF-0.412, ABS–1*, ABDC– C), Vol.14, No. 4, pp. 1-39. DOI: 10.21314/JRMV.2020.228

Mumu, J. R., Tahmid, T., & Azad, M. A. K. (2021). Job satisfaction and intention to quit: A bibliometric review of work-family conflict and research agenda. Applied Nursing Research, 59, 151334

Gender Inequality on the Uses of the Internet: A Study of Dhaka City of Bangladesh, European scientific journal, 2020.

Khayer, A., Talukder, M. S., Bao, Y., & Hossain, M. N. (2020). Cloud computing adoption and its impact on SMEs’ performance for cloud supported operations: A dual-stage analytical approach. Technology in Society, 60, 101225. SCI (Q1), Scopus (Q1), ABDC (A*).

Mumu, J. R., Tahmid, T., & Azad, M. A. K. (2020). Job satisfaction and intention to quit: A bibliometric review of work-family conflict and research agenda. Applied Nursing Research, Online First 23 July, 2020

Bank efficiency in Bangladesh revisited: a slack-based network DEA approach,Journal of Economic Studies

Saona, P. Akther, N. Mamun, MAA. and Azad, MAK (2020). “Technologies for Cross-Border E-Commerce.” Cross Border E-Commerce Marketing and Management, IGI Global (Accepted

Mamun, M. A. A., Strong, C. A., & Azad, M. A. K. (2020) Islamic Marketing: A Literature Review and Research Agenda. International Journal of Consumer Studies. Pre Print. https://doi.org/10.1111/ijcs.12625 [Indexed in WoS, Scopus, ABDC]

2019 (171)

Mechanical and Production Engineering

RH Ahmad, AA Bhuiyan, F Xu, AS Sujon, MR Karim, EH Moin, AKMS Islam, Comparative analysis of refrigerant performance between LPG and R134a under subtropical climate, Journal of Thermal Analysis and Calorimetry (2020), Vol. 139, pp. 2925-2935. DOI: https://doi.org/10.1007/s10973-019-09126-3 (Impact Factor: 4.4, Springer, Q1 Ranked, ISI/Scopus Indexed Journal)

MSR Chowdhury, AK Azad, MR Karim, J Naser, AA Bhuiyan, Reduction of GHG emissions by utilizing biomass co-firing in a swirl-stabilized furnace, Renewable Energy (2019), Vol. 143, pp.1201-1209. DOI: https://doi.org/10.1016/j.renene.2019.05.103 (Impact Factor: 8.7, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Urmee, S. A., Wafa, J. A., Shimu, T. N., Hossain, M., Mahmud, S., Islam, M. R. (2019). LPG Leakage Detector and Controlling Device. Proceedings of 4th International Conference on Mechanical, Industrial and Materials Engineering (pp. 25). 17-19 December, Rajshahi, Bangladesh: Available at: http://icmime-ruet.ac.bd/2019/DIR/Industrial%20Engineering.html.

Urmee, S. A., Shimu, T. N. & Billal, M. M. (2019). Impact of Forecasting Techniques and Market Demand Scenarios on Multi-Product, Multi-Period Aggregate Production Planning. Review of Industrial Engineering Letters, 5(1): 1-11. DOI: 10.18488/journal.71/2019.51.1.11 Available at: http://www.conscientiabeam.com/journal/71/html/5628.

T. Shahriar, M. A. Habib, M. Hasanuzzaman & M. Shahrear-Bin-Zaman, 2019, “Modelling and Optimization of Searaser Wave Energy Converter based Hydroelectric Power Generation for Saint Martin’s Island in Bangladesh”, Ocean Engineering, Vol. 192, 106289.

Md. Anayet U. Patwari, Mohammad Ahsan Habib , Md. Firoz Mahmud, Md. Minhazul Islam [2019], “Improvement of surface roughness during hot air streaming turning process of mild steel using Particle Swarm Optimization”- International Journal of Mechanical Engineering and Robotics, volume 8, issue 4, pp588-593.

A. S. Sujon, T. H. Supto, F. Shariar, M. M. Rahman Pallab, M. Z. Abedin, M. A. Habib, “Effect of stacking sequence on the tensile and flexural properties of unidirectional jute and carbon fiber reinforced epoxy composite”, International Conference on Composite Material, Polymer Science and Engineering（CMPSE2019), Bangkok, Thailand, October 24-25, 2019.

MSR Chowdhury, A K Azad, Md. Rezwanul Karim, Jamal Naser, Arafat A. Bhuiyan, “Reduction of GHG emissions by utilizing biomass co-firing in a swirl-stabilized furnace”, Renewable Energy, 2019, Vol. 143, pp 1201-1209 https://doi.org/10.1016/j.renene.2019.05.103.

Anayet U Patwari, Anas Azmayeen Zamee, Mehedi Hasan Bhuiyan, Sultan Mahmud Sakib [2019],”Surface Roughness Analysis using Sound Signal in Turning of mild steel” IOP conference series Materials Science and Engineering, 703(2019), 012011, doi:10.1088/1757-899X/703/1/012011

Sazzadul Alam Rahat, Mahmudul Alam Shakib, Sayedus Salehin, A K M Sadrul Islam, Md. Ahiduzzaman and Arafat A. Bhuiyan, “Experimental investigation on thermal treatment of local and marine based micro-algae for production of biodiesel”, 8th BSME International Conference on Thermal Engineering, 19–21 December, 2018, Dhaka, Bangladesh. In AIP Conference Proceedings, vol. 2121, no. 1. AIP Publishing, 2019 [https://aip.scitation.org/doi/abs/10.1063/1.5115943]

Md. Mustafizur Rahman, Chowdhury Sadid Alam, T.M. Abir Ahsan, 2019, “A life cycle assessment model for quantification of environmental footprints of a 3.6kWp photovoltaic system in Bangladesh”, International Journal of Renewable Energy Development, 8(2), pp. 113-118.

Sarhan, A. R., Miah, M. A. K., Naser, J. (2019, July). Numerical prediction of froth layer height in slurry column. In AIP Conference Proceedings (Vol. 2121, No. 1, p. 040005). AIP Publishing

Chowdhury, N. E., Miah, M. A. K., Bhuiyan, A. A. (2019, July). Numerical investigation on the effectiveness of water injection method for mitigating propeller cavitation. In AIP Conference Proceedings (Vol. 2121, No. 1, p. 060005). AIP Publishing

Anayet U Patwari, S. Alam Bhuiyan, Qumrul Ahsan, Iftakhar H. Khan, Nihon Rabbani [2019], Prediction and Optimization of Compressive Load of a Green Composite Material from Natural Fiber Using Statistical Approach, ICME 2019, Malaysia

Awais M, Bhuiyan AA, Recent advancements in impedance of fouling resistance and particulate depositions in heat exchangers. International Journal of Heat and Mass Transfer, Elsevier. 2019;141:580-603.

Anayet U Patwari, Anas Azmayeen Zamee, Mehedi Hasan Bhuiyan, Sultan Mahmud Sakib [2019],”Surface Roughness Analysis using Sound Signal in Turning of mild steel” Proceedings of Incite 2019, Indonesia

Anayet U Patwari, S. Alam Bhuiyan, Qumrul Ahsan, Iftakhar H. Khan, Nihon Rabbani [2019], Prediction and Optimization of Compressive Load of a Green Composite Material from Natural Fiber Using Statistical Approach, International Journal of Integrated engineering,11(7),83-89,https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/5042

Awais M, Bhuiyan AA, Enhancement of thermal and hydraulic performance of compact finned-tube heat exchanger using vortex generators (VGs): a parametric study. International Journal of Thermal Sciences, Elsevier. 2019;140:154-66.

Md. Anayet U. Patwari,, Suleiman Mohammed Yusuf, Shahrair Ragib, Ferdous [2019],” Mathematical Model For The Prediction Of Electro-Magnetic Waves On Quality Of Drilled Holes In Composite Materials” International Journal of Engineering, volume XVII, issue 1, pp 125-130

NE Chowdhury, AK Miah, AA Bhuiyan, Numerical investigation on the effectiveness of water injection method for mitigating propeller cavitation, AIP Conference Proceedings 2121 (1), 060005, 2019.

SA Rahat, MA Shakib, S Salehin, AKMS Islam, M Ahiduzzaman, AA Bhuiyan, Experimental investigation on thermal treatment of local and marine based micro-algae for production of biodiesel, AIP Conference Proceedings 2121 (1), 120006, 2019.

R Islam, STM Fahim, AA Bhuiyan, Improvement of thermal-hydraulic performance of compact heat exchangers with multi-corrugated fin and oval tube arrays, AIP Conference Proceedings 2121 (1), 030016, 2019.

M Rana, ME Hossain, MK Hossain, AA Bhuiyan, 3D numerical analysis of the effect of various geometric parameters of EATHEs under steady condition, AIP Conference Proceedings 2121 (1), 040009, 2019.

M Awais, Arafat A. Bhuiyan, Recent advancements in impedance of fouling resistance and particulate depositions in heat exchangers, International Journal of Heat and Mass Transfer, vol. 141: p. 580-603, 2019.

MSR Chowdhury, AK Azad, MR Karim, J Naser, Arafat A. Bhuiyan, Reduction of GHG emissions by utilizing biomass co-firing in a swirl-stabilized furnace, Renewable Energy vol.143: p. 1201-1209, 2019.

M Awais, Arafat A. Bhuiyan, Enhancement of thermal and hydraulic performance of compact finned-tube heat exchanger using vortex generators (VGs): A parametric study, International Journal of Thermal Sciences, vol.140: p. 154-166, 2019.

M Monjurul Ehsan, Sam Duniam, Jishun Li, Zhiqiang Guan, H Gurgenci, A Y Klimenko, "Seasonal variation on the performance of the dry cooled supercritical CO2 recompression cycle", Energy Conversion and Management 197 (2019): 111865. Impact factor-8.21, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890419308477

M Monjurul Ehsan, Sam Duniam, Jishun Li, Zhiqiang Guan, H Gurgenci, A Y Klimenko, “Effect of Cooling System Design on the Performance of the Recompression CO2 Cycle for Concentrated Solar Power Application”, Energy 180 (2019): 480-494. Impact factor-6.08, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S0360544219309880

M Monjurul Ehsan, Zhiqiang Guan, H Gurgenci, A Y Klimenko, “Irreversibility and Exergy Analysis of a Recompression Supercritical CO2 Cycle Coupled with Dry Cooling System”, 4th Thermal and Fluids Engineering Conference (TFEC), April 14–17, 2019, Las Vegas, NV, USA.

M Monjurul Ehsan, Zhiqiang Guan, Hal Gurgenci, A Y Klimenko, “Performance Study of a Dry-Cooled supercritical CO2 Cycle Integrated with Solar Tower”, Asia Pacific Solar Research Conference, December 3-5, 2019, Canberra, Australia.

Shadman Mahmud, Adib Adnan, Shahnoor Shamim Khan, Md. Hamidur Rahman,”Effect of Various Angles of Flat Brake Plate on Aerodynamic Drag for Hyperloop Pod” published in the proceedings of 10th TSME International Conference on Mechanical Engineering (TSME-ICoME- 2019), Pattaya, Thailand .

Sayedus Salehin, Mohaimin Rahman, ASM Redwan Haider, Md. Hamidur Rahman, “Simulation and Analysis of Thermodynamic Cycles Using Coco Simulator: A User-Friendly Free-Software Package” published in the proceedings of International Conference on Recent Advances in Sustainable Energy Research 2019 (RAISER 2019), Penang, Malaysia.

Sayedus Salehin, Mohaimin Rahman, ASM Redwan Haider, Md. Hamidur Rahman, “Open Source Thermophysical Property Library, Coolprop, Coupled With Python For Analyzing Thermodynamic Cycles in Classroom and Research” published in the proceedings of International Conference on Recent Advances in Sustainable Energy Research 2019 (RAISER 2019), Penang, Malaysia.

AR Sarhan, MR Karim, ZK Kadhim, J Naser, Experimental investigation on the effect of vertical vibration on thermal performances of rectangular flat plate, Experimental Thermal and Fluid Science (2019), Vol. 101, pp.231-240. DOI: https://doi.org/10.1016/j.expthermflusci.2018.10.024 (Impact Factor: 3.2, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Electrical and Electronic Engineering

Fahim Abid, Kaveh Niayesh, Nina Sasaki Støa-Aanensen, ‘Arc Voltage Distribution Measurement in Tube Constricted Ultrahigh-Pressure Nitrogen Arc’, in Lecture Notes in Electrical Engineering, Springer, vol. 599, pp 672–679, 2019

Fahim Abid, Kaveh Niayesh and Nina Støa-Aanensen, ''Arc Voltage Distribution Measurement in Tube Constricted Ultrahigh-Pressure Nitrogen Arc'', Lecture Notes in Electrical Engineering, Springer, vol. 599, pp 663–671, 2019

A. B. Siddik, M. H. Rabbi, S. Bae, M. M. Billah, and J. Jang, Self-Heating Effect of Low-Temperature Polycrystalline Silicon Thin Film Transistor Considering Grain Boundary Protrusion, In Proc. 26th International Display Workshop (IDW), 2019, Sapporo, Japan.

Arik Subhana, Faizah Zahin, Fahim Abid, Md. Ziaur Rahman Khan, ‘Emergency Backup Power to a Rural Hospital in Disaster Condition’, 4th International Future Energy Electronics Conference, Nov 25-28, 2019.

Fahim Abid, Kaveh Niayesh, Nina Støa-Aanensen, ‘Post-arc Dielectric Recovery Characteristics of Free-burning Ultrahigh-Pressure Nitrogen Arc’, 5th International conference on Electric Power Equipment-Switching Technology, Kitakyushu, Japan, Oct 13-16, 2019

Fahim Abid, Kaveh Niayesh, Nina Støa-Aanensen, ‘Nozzle wear and pressure rise in heating volume of self-blast type ultra-high pressure nitrogen arc’, Journal of Plasma Physics and Technology, vol. 6, no.1, pp 23-26, 2019.

Md Hasan Maruf and Syed Iftekhar Ali, “Review and Comparative Study of I-V Characteristics of Different Memristor Models with Sinusoidal Input”, International Journal of Electronics, vol. 107, no. 3, pp. 349-375, 2019.

R. K. Mruthyunjaya, T. J. Tredwell, J. Jang, M. Mativenga, J. G. Um, M. M. Billah, Reduction of TFT instability in digital X-Ray detectors. US Patent 10,396,110

Mirza Muntasir Nishat, Fahim Faisal, Md Ashraful Hoque, Anik Jawad Evan, Md.Moshiour Rahaman, Md.Sadman Sifat and H.M. Fazle Rabbi, “Stability Analysis and Optimization of Simulated Annealing (SA) Algorithm Based PID Controller for DC-DC SEPIC Converter”, IJCSNS, vol. 19 no. 9, 2019. [ESCI]

M. M. Hasan, M. M. Billah, X. Li, and J. Jang, Robust Oxide Thin-Film Transistors With Embedded CNT Buried Layer for Stretchable Electronics. IEEE Journal of the Electron Devices Society 7, 801-807, 2019. [SCIE Q2 indexed, JCR Impact Factor: 2.45].

Fahim Faisal, Mirza Muntasir Nishat, “An Investigation for Enhancing Registration Performance with Brain Atlas by Novel Image Inpainting Technique using Dice and Jaccard Score on Multiple Sclerosis (MS) Tissue”, Biomedical and Pharmacology Journal, vol. 12 no. 3, 2019. [SCOPUS]

M. M. Billah, and J. Jang, Remarkable Improvement of Electro‐Mechanical Stabilities in Flexible Oxide TFTs under Bulk‐Accumulation Operation, In Proc. SID Display Week Symposium Digest of Technical Papers 50(1), 210, 2019, San Jose, California, USA.

M. M. Billah, A.B. Siddik, J.B. Kim, L. Zhao, S.Y. Choi, D.K. Yim, J. Jang, Effect of grain boundary protrusion on the electrical performance of low-temperature polycrystalline silicon thin-film transistors. IEEE Journal of the Electron Devices Society 7, 503-511, 2019. [SCIE Q2 indexed, JCR Impact Factor: 2.45].

Syed Iftekhar Ali and Safayat Bin Hakim, “Dynamic Energy Reduction in TCAM Match-Line Sensing Using Charge-Sharing and Positive Feedback”, Journal of Circuits, Systems and Computers, vol. 28, no. 14, pp. 1950238-1-1950238-15, 2019.

Md. Taslim Reza, Muhammad Rezaul Hoque Khan and Mohammad Rakibul Islam (2018). “Modulus reconstruction by simultaneous data response of surface stress and strain distribution.” International Journal of Computer Science and Network Security, Volume-19, Issue-5.

Rakibul Hasan Sagor, Md. Saiful Islam Sumon, Mahir Tazwar, “Design and Analysis of a Novel Air Gap Based Semi-Elliptical Nano-plasmonic Coupler”, Plasmonics, 2019

Md. Saiful Islam Sumon, Mahir Tazwar, Sakib Mahtab Khondokar, and Rakibul Hasan Sagor, “Design and Analysis of Semi-Elliptical Ultra-Compact Nano-plasmonic Coupler”, 1st International Conference on Robotics, Electrical and Signal Processing Techniques (ICREST), Dhaka, Bangladesh, February 2019

M. R. Khan and M. A. Hoque, “Photonic frequency discriminator based laser linewidth estimation technique”, Accepted in International Journal of Advanced and Applied Sciences, 2019.

Mirza Muntasir Nishat, Fahim Faisal and Md. Ashraful Hoque, 'Modeling and Stability Analysis of a DC-DC SEPIC Converter by Employing Optimized PID Controller Using Genetic Algorithm' ,International Journal of Electrical & Computer Sciences IJECS-IJENS, Vol:19 No:01, PP.1-7

Md. Khairul Alam and Md. Ashraful Hoque, "Design and Analysis of Close Loop Interleaved Boost Converter with Arduino based Soft PI Controller for Photovoltaic Application," in 2019 Third IEEE International Conference on Electrical, Computer and Communication Technologies (IEEE ICECCT 2019), 20 - 22, February 2019.

Md. Khairul Alam and Md. Ashraful Hoque, "Design and Analysis of Close Loop Interleaved Boost Converter with Arduino based Soft PI Controller for Photovoltaic Application," in 2019 Third IEEE International Conference on Electrical, Computer and Communication Technologies (IEEE ICECCT 2019) , 20 - 22, February 2019.

Khan, M. R. H. and M. A. Hoque (2019). "Optical sideband injection locking using waveguide based external cavity semiconductor lasers for narrow-line, tunable microwave generation." Photonics 6(3).

Khan, M. R. H. and M. A. Hoque (2019). "A photonic frequency discriminator based laser linewidth estimation technique " International journal of Advanced and Applied Sciences 6(4): 65-74.

Mirza Muntasir Nishat, Fahim Faisal, Md Ashraful Hoque, Anik Jawad Evan, Md.Moshiour Rahaman, Md.Sadman Sifat and H.M.Fazle Rabbi, “Stability Analysis and Optimization of Simulated Annealing (SA) Algorithm Based PID Controller for DC-DC SEPIC Converter”, IJCSNS,19 no. 9 (2019):1-8

Mirza Muntasir Nishat, Fahim Faisal, Md. Ashraful Hoque, Syed Sabeth Salwa Al Musawi, S. M Rafi Uddin, Kaiser Hossain Evan, S. M Taif-Ul-Kabir, "Stability Analysis of DC-DC Boost Converter by Employing Simulated Annealing Algorithm Based Optimized PI Controller" International Conference on Control, Automation, Robotics and Vision Engineering (ICCARVE), Singapore, 2019

Mirza Muntasir Nishat, Fahim Faisal, Mahdi Rahman, Md. Ashraful Hoque, " Modeling and Design of a Fuzzy Logic Based PID Controller for DC Motor Speed Control in Different Loading Condition for Enhanced Performance" 1st International Conference on Advances in Science, Engineering and Robotics Technology (ICASERT), IEEE, 2019

Mohammad T. Kawser and Nafiz I. B. Hamid, "Mitigation of Interference in Uplink Spectrum by Shifting Handover Boundary in LTE Heterogeneous Networks", International Journal of Future Generation Communication and Networking, vol. 12, no. 3, pp. 1-10, 2019. DOI:10.33832/ijfgcn.2019.12.3.01

Mohammad T. Kawser, Md. Nazrul I. Siddique, Z. Kibria and Abdullah A. Noman, "Estimation of the Feasibility of Underlay Inband Device-to-Device Communication based on Radio Conditions in LTE", International Journal of Future Generation Communication and Networking, vol. 12, no. 2, pp. 11-22, 2019. DOI: 10.33832/ijfgcn.2019.12.2.02

Mohammad T. Kawser, Mukto Ahmed, M. A. Hasan, Rafsan Mahin, Saiful Islam, “Performance Evaluation of LTE-V Sidelink in Fading Channel of Various Doppler Spread”, International Journal of Computer Science and Network Security, vol. 19, no. 4, pp. 156-162, April 2019.

Mohammad T. Kawser, Md. S. Fahad, Sakib Ahmed, S. Safwan Sajjad, and Hasib A. Rafi, “The Perspective of Vehicle-to-Everything (V2X) Communication towards 5G”, International Journal of Computer Science and Network Security, vol. 19, no. 4, pp. 146-155, April 2019.

Mirza Muntasir Nishat, Fahim Faisal, Md. Ashraful Hoque, “Modeling and Stability Analysis of a DC-DC SEPIC Converter by Employing Optimized PID Controller Using Genetic Algorithm,” IJECS-IJENS, vol. 19 no. 1, 2019. [SCOPUS]

Fahim Faisal, Mirza Muntasir Nishat, Md. Rasel Mia, "An Investigation on DC Motor Braking System by Implementing Electro-magnetic Relay and Timer." 2019 International Conference on Electrical, Computer and Communication Engineering (ECCE), IEEE, 2019.

Mirza Muntasir Nishat, Fahim Faisal, Md. Ashraful Hoque, Syed Sabeth Salwa Al Musawi, S. M Rafi Uddin, Kaiser Hossain Evan, S. M Taif-Ul-Kabir, "Stability Analysis of DC-DC Boost Converter by Employing Simulated Annealing Algorithm Based Optimized PI Controller." International Conference on Control, Automation, Robotics and Vision Engineering (ICCARVE), Singapore, 2019.

Mirza Muntasir Nishat, Fahim Faisal, Mahdi Rahman, Md. Ashraful Hoque, " Modeling and Design of a Fuzzy Logic Based PID Controller for DC Motor Speed Control in Different Loading Condition for Enhanced Performance." 1st International Conference on Advances in Science, Engineering and Robotics Technology (ICASERT), IEEE, 2019.

M. R. H. Khan and M. A. Hoque, "Optical sideband injection locking using waveguide based external cavity semiconductor lasers for narrow-line, tunable microwave generation," Photonics, vol. 6, 2019. (IF 2.140)

Technical and Vocational Education

Khan, M. S. H., & Islam, T. (2019). Skills gap assessment between TVET institutions and industries of Bangladesh: Perspectives from Industrial Experts, Paper presented at International Conference on Technical and Vocational Education and Training, organize by Kathmandu University School of Education, 11-12 September, 2019.

Hasan, M., Renshaw, P., Karim, A. (2019, July 2-5). Students' conceptions of project-based learning in engineering education: A phenomenographic inquiry [Paper presentation]. Higher Education Research and Development Society of Australasia Conference (HERDSA). University of Auckland, New Zealand

Khan, M. S. H., Abdou, B. O., Kettunen, J. & Gregory, S. (2019) A phenomenographic research study of students' conceptions of mobile learning: An example from higher education, SAGE Open, 9 (3), (SSCI + Scopus Indexed): Impact Factor: 2.032

Library work at the Center for Islamic Studies in Palermo, Italy on 24th April to 5thMay, 2019 under the supervision of Dr. Mohammad Hashas.

Attended in Bologna Italy, to spend to weeks at the John XXIII Foundation for Religious Sciences from 9th April to 24th April, 2019 under the supervision of Professor Alberto Melloni.

Courtesy visit at the faculty of Theology, Copenhagen University Denmark on 18-19 April, 2019.

Meeting with Professor Paolo Branca at the Catholic University in Milan Italy, on 16th April, discussed on the research project Moralization of Modern Education.

Islamic Education in Mughal Dynasty : A brief History, The Journal of Islamic University Studies, Vol. 3, ISSN-2072-9162, Page – 10, 2019.

Contribution of Islamic Education in Ottoman Turkey’s (1290 to 1922) An Analysis, International Journal of Ethics and Social science, Dhaka, ISSN : 2308-5096 (P) ISSN 2311-620x (o), Published; pages-13, 2019.

Al Mamun, M. A., Lawrie, G., Wright, T. (2019). A changing learning environment: The benefits of online learning for scientific inquiry. Education for a Socially Just World. Proceedings of 49th conference organised by Australian Association for Research in Education (AARE), December 2019, Brisbane: Queensland University of Technology (QUT)

Karim, A., Campbell, M., & Hasan, M. (2019). A new method of integrating project-based and work-integrated learning in postgraduate engineering study. The Curriculum Journal, 1-17. doi:10.1080/09585176.2019.1659839

Hasan, M., & Khan, M. S. H. (2019) The Role of Skill Training in Socio-economic Development in Developing Countries. In A.V. Mostafa Zamanian (Eds.), Socio-Economic Perspectives on Vocational Skill Development, IGI-global (USA).

F. A. Haolader. 'Promoting SMEs through Personnel Development: A Case Study of Catering Service Sector in Bangladesh'. Intl. Alumni Workshop on 'Organizational and Personnel Development for the Improvement of Value Chains in the Agricultural Sector and the Food Industry' in Bishkek, Kyrgyzstan, from October 28 to November 2, 2019.

Computer Science and Engineering

Muhammad Shihab Rashid, Zubayet Zaman, Hasan Mahmud, Md. Kamrul Hasan, "Emotion Recognition with Forearm-based Electromyography" November 2019, https://doi.org/10.48550/arXiv.1911.05305

Ahmed Al Marouf, Md Kamrul Hasan, Hasan Mahmud, "Comparative analysis of feature selection algorithms for computational personality prediction from social media", IEEE Transactions on Computational Social Systems, Volume 7, Issue 3, Pages 587-599, 19 February, 2019, 10.1109/TCSS.2020.2966910

Md. Nazmul Haque, Mahir Mahbub, Md Hasan Tarek, Lutfun Nahar Lota, and Amin Ahsan Ali, "Nurse care activity recognition: a GRUbased approach with attention mechanism”In Adjunct Proceedings of the 2019 ACM International Joint Conference on Pervasive and Ubiquitous Computing and the 2019 International Symposium on Wearable Computers (UbiComp/ISWC ’19 Adjunct), pp. 719-723. 2019

Aziz, T.I., Protik, S., Hossen, M.S., Choudhury, S., & Alam, M.M. (2019). Degree-based Balanced Clustering for Large-Scale Software Defined Networks. 2019 IEEE Wireless Communications and Networking Conference (WCNC), 1-6.

A. S. Rubel, A. Ahsan Chowdhury and M. H. Kabir, "Facial Expression Recognition Using Adaptive Robust Local Complete Pattern," 2019 IEEE International Conference on Image Processing (ICIP), 2019, pp. 41-45, doi: 10.1109/ICIP.2019.8802911.

Islam, M.U., Mahmud, H., Ashraf, F., Hossain, I., & Hasan, M. (2017). Yoga posture recognition by detecting human joint points in real time using microsoft kinect. 2017 IEEE Region 10 Humanitarian Technology Conference (R10-HTC), 668-673.

Hassan, M.Y., Hussain, F., Hossen, M.S., & Choudhury, S. (2019). An online resource allocation algorithm to minimize system interference for inband underlay D2D communications. Int. J. Commun. Syst., 32.

Aziz, T.I., Protik, S., Hossen, M.S., Choudhury, S., & Alam, M.M. (2019). Degree-based Balanced Clustering for Large-Scale Software Defined Networks. 2019 IEEE Wireless Communications and Networking Conference (WCNC), 1-6.

Ali Zafar Sadiq, Md. Jubair Ibna Mostafa and Kazi Sakib, "On the Evolutionary Relationship between Change Coupling and Fix-Inducing Changes," In Proceedings of the 14th International Conference on Evaluation of Novel Approaches to Software Engineering (ENASE), Heraklion, Crete, Greece, 2019 pages. 494-501. DOI: 10.5220/0007758804940501

Rahman, M.M., Hasan, M.K. A framework for predicting personalized product packages. International Journal of Advanced Trends in Computer Science and Engineering, 2019, 8(4), pp. 1069–1075

Md. Nazmul Haque, M Tanjid Hasan Tonmoy, Saif Mahmud, Amin Ahsan Ali, Muhammad Asif Hossain Khan, Mohammad Shoyaib, GRU-based Attention Mechanism for Human Activity Recognition”,ICASERT-2019: 1st International Conference on Advances in Science, Engineering and Robotics Technology.

Munir, A., Laskar, M.T., Hossen, M.S., & Choudhury, S. (2019). A localized fault tolerant load balancing algorithm for RFID systems. Journal of Ambient Intelligence and Humanized Computing, 1-13.

Md. Jubair Ibna Mostafa, "An Empirical Study on Clone Evolution by Analyzing Clone Lifetime," In Proceedings of the IEEE 13th International Workshop on Software Clones (IWSC) co-located with Software Analysis, Evolution and Reengineering (SANER), Hangzhou, China, 2019, pages. 20-26. DOI: 10.1109/IWSC.2019.8665850

Shohel ahmed, Shake Md. Riazul Islam, Kwak Kyung Sup - “METHOD AND SYSTEM FOR FINGERPRINT-BASED PAYMENT” Application No.(Date) 1020170141375 (2017.10.27),Publication : KR101951125B1, Publication Date:2019-02-21

Ali Zafar Sadiq, Ahmedul Kabir, Pritom Saha Akash and Md. Jubair Ibna Mostafa, "Analyzing Corrective Maintenance using Change Coupled Clusters at Fix-inducing Changes," In Proceedings of the International Conference on Electrical, Computer and Communication Engineering (ECCE), Cox’sBazar, Bangladesh, 2019, pages. 1-6. DOI: 10.1109/ECACE.2019.8679503

Sobhan, M., Chowdhury, M.Z., Ahsan, I., Mahmu, H., & Hasan, M. (2019). A Communication Aid System for Deaf and Mute using Vibrotactile and Visual Feedback. 2019 International Seminar on Application for Technology of Information and Communication (iSemantic), 184-190.

M. R. Islam, S. J. Miah, A. R. M. Kamal, and O. Burmeister, “A design construct of developing approaches to measure mental health conditions,” Australasian Journal of Information Systems, vol. 23, 2019.

A. A. Rahman, M. R. Karim, R. Kushol, and M. H. Kabir, “Performance Comparison of Feature Descriptors in Offline Signature Verification,” Journal of Engineering and Technology, vol. 14, no. 1, 2018.

Md Eusha Kadir, Pritom Saha Akash, Sadia Sharmin, Amin Ahsan Ali, Mohammad Shoyaib . Can a simple approach identify complex nurse care activity?. In Adjunct Proceedings of the 2019 ACM International Joint Conference on Pervasive and Ubiquitous Computing and Proceedings of the 2019 ACM International Symposium on Wearable Computers, 2019

Sadia Sharmin, Amin Ahsan Ali, Muhammad Asif Hossain Khan, MohammadShoyaib and Oksam Chae . Simultaneous feature selection and discretization based on mutual information. In Pattern Recognition, Elsevier, 2019

A Complete Bangla Optical Character Recognition System: An Effective Approach - Tasnim Ahmed, Md. Nishat Raihan, Rafsanjany Kushol, Md Sirajus Salekin - 2019 22nd International Conference on Computer and Information Technology (ICCIT)

Haque, Md Nazmul, Mahir Mahbub, Md Hasan Tarek, Lutfun Nahar Lota, and Amin Ahsan Ali. "Nurse Care Activity Recognition: A GRU-based approach with attention mechanism." In Adjunct Proceedings of the 2019 ACM International Joint Conference on Pervasive and Ubiquitous Computing and Proceedings of the 2019 ACM International Symposium on Wearable Computers, pp. 719-723. 2019.

Kushol, R., Raihan, M., Salekin, M. S., & Rahman, A. B. M. (2019). Contrast Enhancement of Medical X-Ray Image Using Morphological Operators with Optimal Structuring Element. arXiv preprint arXiv:1905.08545.

M. Y. Hassan, F. Hussain, and S. Choudhury "Connectivity Preserving Obstacle Avoidance Localized Motion Planning Algorithms for Mobile Wireless Sensor Networks", Peer-to-Peer Networking and Applications, 2019, 12(3), pp. 647–659. DOI: 10.1007/s12083-018-0656-y

M. Y. Hassan, F. Hussain, M. S. Hossen, S. Choudhury, "An online resource allocation algorithm to minimize system interference for inband underlay D2D communications", International Journal of Communication Systems, 2019, 32(13), e4011. DOI: 10.1002/dac.4011

Civil & Environmental Engineering

Sadeek, N. S., Ahmed, A. J. M. M. U, Hossain, M. and Hanaoka, S. (2019) Effect of land use on crime considering exposure and accessibility, Habitat International, Vol. 89. pp. 1-10.

Hossain, M., Abdel-Aty, M., Quddus, M. A., Muromachi, Y. and Nafis, S. S. (2019) Real-time crash prediction models: state-of-the-art, design pathways and ubiquitous requirements, Accident Analysis and Prevention, Vol. 124, pp. 66-84.

Rouf, K. B., Hossain, D. M. and Hossain, M. (2019) Female Passengers’ Perception on the Service Quality of Public Bus Services: An Exploratory Study on Dhaka City, Bangladesh, International Journal of Gender Studies in Developing Societies, Vol. 3, No. 2, pp. 99-125

AH Mahmood, SJ Foster, A Castel, B Modra, C Heidrich, G Tory, R Genrich, and P Engelen (2019), ‘Development of high-density geopolymer concrete for breakwater armour units for Port Kembla harbour’, Concrete in Australia, 44(4), pp. 34-39.

Bashar, M. Z., Elseifi, M. A., Mousa, M. R., Zhang, Z., & Gaspard, K. (2019). Optimizing the Performance of Microsurfacing Treatments in Flexible Pavements and Assessing Its Effects on Moisture Damage. Transportation Research Record: Journal of the Transportation Research Board.

Mousa, M., Elseifi, M. A., Bashar, M. Z., Zhang, Z., Gaspard, K. (2019). Cost Effectiveness and Optimal Timing of Crack Sealing in Asphalt Overlays. Journal of Transportation Engineering, Part B: Pavements.

2. Kabir, M.I.; Lee, CK; Rana M.M.; Zhang, Y.X., 2019, ‘Flexural behaviour of engineered cementitious composite encased high strength steel composite beam’, Copenhagen, Denmark., presented at The 14th Nordic Steel Construction Conference, Copenhagen, Denmark., 18 September 2019 - 20 September 2019, DOI: http://dx.doi.org/10.1002/cepa.1125

HA Khan, A Castel, MSH Khan, and AH Mahmood (2019), ‘Durability of calcium aluminate and sulphate resistant Portland cement-based mortars in aggressive sewer environment and sulphuric acid’, Cement and Concrete Research, 124, 105852.

Soumik Nafis Sadeek, Abu Jar Md. Minhuz Uddin Ahmed, Moinul Hossain and Shinya Hanaoka (2019); “Effect of Land use on Crime Considering Exposure and Accessibility”, Habitat International, vol- 89 (2019), 102003, ISSN 0197-3975, DOI: https://doi.org/10.1016/j.habitatint.2019.102003

TU Mohammed, AH Mahmood, SS Ahmed, and M Pasha (2019), ‘Clay-burnt coarse aggregate: production and utilization in concrete’, Fifth International Conference on Sustainable Construction Materials and Technologies (SCMT5), 14-17 July 2019, Kingston University, London, UK.

Rifaat, S. M., Pasha, M., Tay, R. and De Barros, A. (2019). Effect of Community Road Infrastructure, Socio-Demographic and Street Pattern in Promoting Walking as Sustainable Transportation Mode. The Open Transportation Journal, Vol. 13, pp. 25- 34. DOI: 10.2174/1874447801913010025 (SCOPUS Indexed Journal)

DoE. Minamata Convention on Mercury: Initial Assessment Report for Bangladesh. Department of Environment, Ministry of Environment and Forest, Government of the People’s Republic of Bangladesh, June 2019

Alam, T., Barua, S., Anisa, H, Islam, M. S. (2019) “Evaluation of Infiltration Rate from Soil Properties Using Artificial Neural Network.” Proceedings of International Conference on Disaster Risk Management 2019, Dhaka. Pp 144-147. [Presented]

Kabir, M.I.; Lee, C.K.; Rana, M.M.; Zhang, Y.X., 2019, ‘Flexural and bond-slip behaviours of engineered cementitious composites encased steel composite beams’, Journal of Constructional Steel Research, vol. 157, pp. 229 – 244, DOI: http://dx.doi.org/10.1016/j.jcsr.2019.02.032

Mozaher Ul Kabir, Syed Shadman Sakib, Istiakur Rahman and Hossain Md. Shahin. (2019). “Performance of ANN model in predicting the bearing capacity of shallow foundations” in ‘Geotechnics of Transportation Infrastructure’, chapter no: 55, Chapter DOI: 10.1007/978-98113-6713-7_55

Sadeek, S. N., Rifaat, S. M., Mahmud, H., Saif, A., Rimol, A. H, Tahmid, A. (2019). Effect of Fatigue on Traffic Law Violation of Bus Drivers in context of Developing Countries. Paper published in the proceedings of 13th International Conference of Eastern Asia Society for Transportation Studies(EASTS), September 09-12, 2019, pp. 1-13, Colombo, Sri-Lanka.

Sakib, N., & Bhasin, A. (2019). "Measuring polarity-based distributions (SARA) of bitumen using simplified chromatographic techniques." International Journal of Pavement Engineering, 20(12).

Sakib, N., Bhasin, A., Islam, M. K., Khan, K., & Khan, M. (2019). "A review of the evolution of technologies to use sulfur as a pavement construction material." International Journal of Pavement Engineering.

Ramm, A., Downer, M. C., Sakib, N., & Bhasin, A., (2019). "Morphology and kinetics of asphalt binder microstructure at gas, liquid and solid interfaces." Journal of Microscopy 273(3), pp. 109-117.

Sk. S Sakib, BM S. Sakib and Md. Rezaul Karim (2019). Rainwater harvesting system for commercial building in Dhaka city: reliability, economic benefit, water and energy savings, Proceedings of the 4th GCSTMR Congress, 20-22 January, 2019, Dhaka, Bangladesh.

Omor S Chowdhury, Redowan Rashid and Md. Rezaul Karim (2019). E.coli removal efficiency and physical-chemical parameters analysis of mineral pot filters in Bangladesh, Proceedings of the 4th GCSTMR Congress, 20-22 January, 2019, Dhaka, Bangladesh.

Sakib S Prosun, Ahmed F Mahabub and Md. Rezaul Karim (2019). Statistical Analysis of rainfall trend and variability due to climate change in Bangladesh, Proceedings of the 4th GCSTMR Congress, 20-22 January, 2019, Dhaka, Bangladesh.

M. W. Zaman, K. S. Mita, A. A. Azad, R. Hossain, M. U. Kabir and H. M. Shahin (2019): A numerical study on slope stability analysis by finite element method using FEMtij-2D application, International Conference on Research & Innovation in Civil Engineering, Bangladesh, January.

H. M. Shahin, T. Nakai, K. Ishii, T. Iwata and S. Kuroi (2019): Experimental and Numerical Investigation of Fundamental Mechanism of Tunneling and Influence on Nearby Flat Foundation, International Journal of Civil Engineering. Volume 17 (1), pp 91–101, January.

H. M. Shahin, T. Nakai and T. Okuno (2019): Numerical study on 3D effect and practical design in shield tunneling, Underground Space. Volume 4, pp 201–209.

T. Nakai, H. M. Shahin and I. Akira (2019): Rational modelling of elastic soil behaviour in 3D condition, IS-GLASGOW 2019- 7th International Symposium on Deformation Characteristics of Geomaterials, Glasgow, UK, June.

T. Nakai and H. M. Shahin (2019): A Simple method to describe stress path dependency of plastic flow, 16th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, Taipei, Taiwan, October.

T. Nakai and H. M. Shahin (2019): Developments of Subloading tij model after IWS-Takayama, IWS-MAURITIUS 2019 - International Workshop on Computational Geo-Environmental Mechanics: Multiphysics and Multiscale Approaches to Submarine and Coastal Problems, Taipei, Mauritius, November.

N. Nawal, M. Mozid, M. I. K. Porag, S.K.T. Islam and H. M. Shahin (2019): Numerical and analytical study of stability of an existing multi-layered roadside slope with the validation by a physical model, 9th Int. Conf. on Geotechnique, Construction Materials and Environment, Tokyo, Japan, November.

M. L. Hossain, H. M. Shahin and T. Nakai (2019): Enhancement of bearing capacity of soft soil using geosynthetics, International Journal of GEOMATE. Vol.17, Issue 64, pp. 238- 244.

M. U. Kabir, M. Hashimur Rahman, M. M. Hossain and H. M. Shahin (2019): Stability assessment of road-side natural slopes using conventional and numerical techniques, 1st International Conference on Transportation Research 2019 (ICTR 2019), Dhaka, December.

Business and Technology Management

Factors Influencing Human Resource Outsourcing: Beyond the Boundary of Traditional Human Resource practices, Journal of Management, 2019.

Uddin, M.S., Chi, G., Habib, T. Multi-Stage Hybrid Model by Gradient Boosting Method: Evidence from Cross-Country Credit Data. The 2019 Cross Country Perspective in Finance Symposium, Jinan, 2019, June 25-27.

Chi, G., Uddin, M.S. (Corresponding Author), Abedin, M.Z., and Yuan, K. (2019). Hybrid Model for Credit Risk Prediction: An Application of Neural Network Approaches. International Journal of Artificial Intelligent Tools (SCI, IF-0.689), Vol. 28, No.5, 1950017-1-33. WOS Accession Number: 000484115600004, DOI: 10.1142/S0218213019500179.

Leveraging Distribution to Maximize Firm performance in Emerging Markets, Robison College of Business, Georgia State University, and Atlanta Georgia. Organized by School of Management, Huazhong University of Science and Technology, Wuhan, China.

Technology Mergers and Acquisitions in the Presence of an Installed Base: A Business Strategic Analysis, School of Management, Huazhong University of Science and Technology, Wuahn, China.

Strategic Planning of Hospitality & Tourism: A Study Of Cox's Bazar, Bangladesh","Journal of Tourism Research,

Ride-sharing service in Bangladesh: Contemporary states and prospects (2019). International Journal of Business and Management, 14(9).

2018 (143)

Mechanical and Production Engineering

Mohammad Ahsan Habib, Md. Anayet U Patwari, Nuruzzaman Rakib, Mahmudul H. Pavel, Ahmed Y. Sanin, Asif Salman and Fahrial Alam, An Improvement in Welded Joint Using Vibration Assisted Arc Welding, ICOMM 2018, Australia.

Awais M, Bhuiyan AA, Heat and mass transfer for compact heat exchanger (CHXs) design: A state-of-the-art review. International Journal of Heat and Mass Transfer, Elsevier. 2018; 127:359-80.

M. A. Habib, Md. A. U Patwari, N. Rakib, M. H. Pavel, A. Y. Sanin, A. Salman and F. Alam, “An Improvement in Welded Joint Using Vibration Assisted Arc Welding” International Conference on Materials and Manufacturing (ICOMM 2018). Monash University, Melbourne, Australia, July 16-18, 2018.

Hibal Ahmed, Jebreel Muhammad, MuhammadHamza, Mustafa Kamal Anayet U Patwari [2018], Investigation of Surface Roughness by using the Vibration Assisted Milling Process of Glass Fiber Reinforced Polymer, Global journal of Researchers in Engineering, volume 18, issue 1.

A method for avoiding of chatter formation in machining operations”, Md. Anayet U Patwari, A.K.M. Nurul Amin

MR Karim, J Naser, CFD modelling of combustion and associated emission of wet woody biomass in a 4 MW moving grate boiler, Fuel (2018), Vol. 222, pp. 656-674. DOI: https://doi.org/10.1016/j.fuel.2018.02.195 (Impact Factor: 7.4, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Dihydroxy-hexahelicene in Thin Films; Structural Characterization and Photoelectrochemical Properties,Md. Nazmul Kayes, Md Jalil Miah, Mohammad Shahabuddin, Michinori Karikomi, Sachio Yoshihara, Eri Nasuno, Norihiro Kato, Ken-ichi Iimura:Trans. Mat. Res. Soc. Japan 43[2]57-60 2018.

Mohammad Ahsan Habib, Md. Anayet U Patwari, Nuruzzaman Rakib, Mahmudul H. Pavel, Ahmed Y. Sanin, Asif Salman and Fahrial Alam [2018], An Improvement in Welded Joint Using Vibration Assisted Arc Welding, MATEC web of Conferences, 221-04004-2018.

Md. Anayet U. Patwari,, Yahya Mohammad Alfakih, Ibrahim Bamnjo [2018],” Investigation of tool overhang length effects on machining responses during Turning Operation” International Journal of Engineering, volume-16, issue-2, pp1-4.

M R Karim, AA Bhuiyan, J Naser, Effect of recycled flue gas ratios for pellet type biomass combustion in a packed bed furnace, International Journal of Heat and Mass Transfer (2018), Vol. 120, pp. 1031-1043. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.116 (Impact Factor: 5.2, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Anang N.A., Abdullah L., Jamaludin Z., Maharof M., Chiew T.H. 2018. Design and Implementation of Cascade NP/PI Controller for Feed Table Ball Screw Driven Milling Machine. In: Hassan M. (eds) Intelligent Manufacturing & Mechatronics. Lecture Notes in Mechanical Engineering. Springer, Singapore.

Awais M, Bhuiyan AA, Heat transfer enhancement using different types of vortex generators (VGs): A review on experimental and numerical activities. Thermal Science and Engineering Progress, Elsevier. 2018;5:524-45.

Md. Abdul Karim Miah, Ifat Rabbil Qudrat Ovi, Nasimul Eshan Chowdhury, Shorab Hossain, and Md. Nurul Absar Chowdhury. “Computational investigation of pulsatile blood flow through sinusoidal stenoses of varying lengths”. Journal of Engineering and Technology (JET), vol. 14, 2018

Arafat A. Bhuiyan, AS Blicblau, AKMS Islam, J Naser, A review on thermo-chemical characteristics of coal/biomass co-firing in industrial furnace. Journal of Energy Institute, vol. 91(1): p.1-18, 2018.

M Awais, Arafat A. Bhuiyan, Heat and mass transfer for compact heat exchanger (CHXs) design: A state-of-the-art review. International Journal of Heat and Mass Transfer, vol.127(C): p. 359-380, 2018.

MR Karim, Arafat A. Bhuiyan, J Naser, Effect of recycled flue gas ratios for pellet type biomass combustion in a packed bed furnace. International Journal of Heat and Mass Transfer, vol. 120, p. 1031-1043, 2018.

J Hart, Arafat A. Bhuiyan, J Naser, Aerodynamics of burner jet in a tangentially-fired boiler: A CFD modeling and experiment, International Journal of Thermal Sciences, vol.129: p.238-253, 2018.

M Awais, Arafat A. Bhuiyan, Heat transfer enhancement using different types of vortex generators (VGs): A review on experimental and numerical activities. International Journal of Thermal Science and Engineering Progress, vol. 5: p.524-545, 2018.

M R Karim, J Naser, Numerical study of the ignition front propagation of different pelletised biomass in a packed bed furnace, Applied Thermal Engineering (2018), Vol. 128, pp. 772-784. https://doi.org/10.1016/j.applthermaleng.2017.09.061 (Impact Factor: 6.4, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Salehin, Sayedus, M Monjurul Ehsan, Syed Rafat Faysal, and A K M Sadrul Islam. "Utilization of Nanofluid in Various Clean Energy and Energy Efficiency Applications." In Application of Thermo-fluid Processes in Energy Systems, pp. 3-33. Springer, Singapore, 2018. https://link.springer.com/chapter/10.1007/978-981-10-0697-5_1

M Monjurul Ehsan, Zhiqiang Guan, A Y Klimenko, “A comprehensive review on heat transfer and pressure drop characteristics and correlations with supercritical CO2 under heating and cooling applications”, Renewable and Sustainable Energy Reviews 92 (2018) 658–675. Impact factor-12.34, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S1364032118303241.

M Monjurul Ehsan, Zhiqiang Guan, A Y Klimenko, Xurong Wang, “Design and comparison of direct and indirect cooling system for 25MW solar power plant operated with supercritical CO2 cycle”, Energy Conversion and Management 168 (2018) 611–628. Impact factor-8.21, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0196890418304205

M Monjurul Ehsan, Xurong Wang, Zhiqiang Guan, A Y Klimenko, “Design and performance study of dry cooling system for 25MW solar power plant operated with supercritical CO2 cycle”, International Journal of Thermal Sciences 132 (2018) 398–410. Impact factor-3.89, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S1290072917320367

M Monjurul Ehsan, Sam Duniam, Andrew Lock, Yuchen Dai, Zhiqiang Guan, A Y Klimenko, H Gurgenci, “Cooling System design and Performance Analysis for a Supercritical CO2 Recompression Cycle”, 21st Australasian Fluid Mechanics Conference, 10-13 December 2018, Adelaide, Australia.

Yuchen Dai, Alexander Y Klimenko, Yuanshen Lu, M Monjurul Ehsan, “Numerical investigations on the effect of swirling plume on natural draft dry cooling towers”, 21st Australasian Fluid Mechanics Conference, 10-13 December 2018, Adelaide, Australia.

M. Nasim, A. Cernicchi, U. Galvanetto, The effect of human body positioning on neck injuries during compressive impacts, International Conference on Impact Loading of Structures and Materials, 2018, Xian, China.

Maharof, M., Jamaludin, Z., Minhat, M., Anang, N.A., Chiew, T.H., and Jamaludin, J. 2018, December. Damping of Disturbance Cutting Forces in Milling Cutting Process using State Estimator Controller Approach. In 2018 ICPE, The 8th International Conference on Postgraduate Education 2018 (ICPE 2018).

Maharof, M., Jamaludin, Z., Minhat, M., Anang, N.A., Chiew, T.H. and Jamaludin, J., 2018. Suppression on Effect of Cutting Forces towards Tracking Performance in Milling Cutting Process using Disturbance Force Observer. In: Hassan M. (eds), Intelligent Manufacturing & Mechatronics. Springer, Singapore.

M Maharof, Z Jamaludin, M Minhat, L Abdullah, NA Anang, TH Chiew, J Jamaludin, and T Tjahjowidodo, 2018. Suppression of Cutting Forces using Combined Inverse Model Based Disturbance Observer and Disturbance Force Observer. Journal of Advanced Manufacturing Technology, 12(1).

NA Anang, L Abdullah, Z Jamaludin, M Maharof, MH Nordin, 2018. Robust Motion Controller Design for Precise Tracking of Ball Screw Driven Positioning System. Journal of Advanced Manufacturing Technology, 12(1-4), pp. 73-86.

NA Anang, L Abdullah, Z Jamaludin, TH Chiew, M Maharof, SNS Salim, and Z Retas, 2018. Analysis of Nonlinear PID Controller for Tracking Performance of Ball Screw Drive. Journal of Telecommunication, Electronic and Computer Engineering, 10(2), pp. 67-71.

Anang, N. A., Abdullah, L., Jamaludin, Z., Maharof, M., Chiew, T. H., 2018. Intelligent Manufacturing & Mechatronics. Proceedings of Symposium, Pekan, Pahang, Malaysia, pp. 85-91.

Electrical and Electronic Engineering

Fahim Abid, Kaveh Niayesh, Nina Støa-Aanensen, " Ultrahigh-Pressure Nitrogen Arc Burning Inside Cylindrical Tubes," in IEEE Transactions on Plasma Science, vol. 47, no. 1, pp. 754-761, Jan. 2019.Transactions on Plasma Science, 47(1), pp.754-761.

Mohammad Rakibul Islam, Md. Arif Hossain, Syed Iftekhar Ali, Jakeya Sultana and Md. Saiful Islam, “Design and characterization of an ultra low loss, dispersion-flattened slotted photonic crystal fiber for terahertz application”, Journal of Optical Communications, 2018.

Fahim Abid, Kaveh Niayesh, Nina Støa-Aanensen, Erik Jonsson, Magne Runde, "Arc Voltage Measurements of Ultrahigh-Pressure Nitrogen Arc in Cylindrical Tubes," 22nd international conference on gas discharge and their application, Novi Sad, Serbia, Sep 2-7, 2018.

A. Rahaman, M. M. Hasan, M. M. Billah, and J. Jang, Channel Length Dependence of Mechanical Strain for Flexible (a-IGZO) TFT, In Proc. The electrochemical Society Symposium Digest Paper, 2018, Cancun, Mexico.

A. Rahaman, M. M. Billah, J. G. Um, M. M. Hasan, and J. Jang, Effect of doping flouring in offset region on performance of coplanar a-IGZO TFTs. IEEE Electron Device Letters 39(9), 1318-1321, 2018. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

M. M. Billah, M. S. Park, J. K. Saha, M. M. Hasan, J. -U. Han, M. Hwang, and J. Jang, Mechanically Robust High‐Performance Flexible Oxide TFTs with Imbedded Buried CNT Electrode for Bendable Displays, In Proc. SID Display Week Symposium Digest of Technical Papers 49(1), 800, 2018, Los Angeles, California, USA.

M. M. Billah, J.U. Han, M.M. Hasan, and J. Jang, Reduced mechanical strain in bendable a-IGZO TFTs under dual-gate driving. IEEE Electron Device Letters 39 (6), 835-838, 2018. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

M. M. Billah, M. M. Hasan, and J. Jang, Millisecond stretched exponential recovery of threshold voltage for mechanically stressed flexible a-IGZO thin-film transistors. IEEE Electron Device Letters 39 (5), 699-702, 2018. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

Md. Taslim Reza, Abu Hena Md. Mustafa Kamal, Muhammad Rezaul Hoque Khan and Mohammad Rakibul Islam (2018). “Young’s Modulus Distribution Prediction Analysis of Elasticity Imaging Technique Based on Location of Tumors.” International Journal of Computer Science and Network Security, Volume-17, Issue-8.

Riyasat Ohib, Samin Yeasar Arnob, Riazul Arefin, Mohammad Muhtady Muhaisin, Tanzil Bin Hassan, MR Amin, Md. Taslim Reza (13-14 November 2018). “ENF Based Grid Classification System: Identifying the Region of Origin of Digital Recordings.” International Conference on Electrical Engineering & Computer Science (ICEECS) 2018, Bali, Indonesia.

Islam, Mohammad Rakibul, Md Arif Hossain, Syed Iftekhar Ali, Jakeya Sultana, and Md Saiful Islam. "Design and Characterization of an Ultra Low Loss, Dispersion-Flattened Slotted Photonic Crystal Fiber for Terahertz Application." Journal of Optical Communications 1, no. ahead-of-print (2018).

M. Khan, M. Islam, G. Sarowar, T. Reza and M. Hoque, "Carrier generation using a dual-frequency distributed feedback waveguide laser for phased array antenna (PAA)," Journal of the European Optical Society-Rapid Publications, vol. 13, p. 30, 2018

Mohammad Bazlur Rashid, Mohammad Abdul Moin Oninda, Fahim Faisal, Mirza Muntasir Nishat, Golam Sarowar and Md. Ashraful Hoque, “A Novel Topology of Single-Phase AC-DC Integrated Boost-SEPIC (IBS) Converter Using Common Part Sharing Method (CPSM) for High Step-Up Applications”. Journal of Power and Energy Engineering, 2018, pp.38-47

K. Akter, G. Sarowar, and S.F.B. Ahmed,“Closed Loop Analysis of a Novel Single Phase AC-DC ĆUK Converter with Low Input Current THD and Improved Power Factor,” ICECE 2018.

K. Akter, G. Sarowar, A.M. Oninda, “A New Topology of Input Switched High Performance Single Phase AC-DC Boost Converter,” 13th International Globalization Conference.2018

K. Akter, G. Sarowar, A. Hoque, F. Faisal and A.M. Oninda, “Input Switched Single Phase AC-DCPFC Boost Converter to Improve Overall Power Quality for High Performance,” ICAEEE 2018.

K. Akter, G. Sarowar, and A. Hoque ,S.F.B. Ahmed “Modeling and Simulation of Input Switched AC-DC SEPIC Converter with PFC Control for Optimized Operation”, ICEEICT 2018.

Sairatun Nesa Soheli, Golam Sarowar, Md. Ashraful Hoque and Md. Saidul Islam, “A DC-DC Step Down Converterfor Unprecedented Higher Efficiency”. International Conference on Advancement in Electrical and Electronic Engineering - (ICAEEE 2018).

Sairatun Nesa Soheli, Golam Sarowar, Md. Ashraful Hoque and Md. Saidul Islam “Design and analysis of a DC-DC buck boost converter to achieve high efficiency and low voltage gain by using buck boost topology into buck topology “. International Conference on Advancement in Electrical and Electronic Engineering - (ICAEEE 2018).

Mirza Muntasir Nishat , Fahim Faisal, Mohammad Abdul Moin Oninda and Md. Ashraful Hoque “Modeling, Simulation and Performance Analysis of SEPIC Converter Using Hysteresis Current Control and PI Control Method.”. 2nd Int. Conf. on Innovations in Science, Engineering and Technology (ICISET) 27-28 October 2018, Chittagong, Bangladesh

Mohammad Bazlur Rashid, Mohammad Abdul Moin Oninda, Fahim Faisal, Mirza Muntasir Nishat, Golam Sarowar, Md. Ashraful Hoque, “A Novel Topology of Single-Phase AC-DC Integrated Boost-SEPIC (IBS) Converter Using Common Part Sharing Method (CPSM) for High Step-Up Applications,” JPEE, vol. 6 no. 6, 2018. [SCOPUS, WoS]

Fahim Faisal, Mirza Muntasir Nishat, Mohammad Abdul Moin Oninda," Spectroscopic Characterization of Biological Tissue using Quantitative Acoustics Technique." 4th International Conference on Electrical Engineering and Information & Communication Technology (iCEEiCT), IEEE, 2018.

Mirza Muntasir Nishat, Fahim Faisal, "An Investigation of Spectroscopic Characterization on Biological Tissue." 4th International Conference on Electrical Engineering and Information & Communication Technology (iCEEiCT), IEEE, 2018.

Mirza Muntasir Nishat, Fahim Faisal, Mohammad Abdul Moin Oninda, Md. Ashraful Hoque, " Modeling, Simulation and Performance Analysis of SEPIC Converter Using Hysteresis Current Control and PI Control Method." 2nd Int. Conf. on Innovations in Science, Engineering and Technology (ICISET), IEEE, 2018.

Md. T. Al-Amin, Md. F.A. Khan and Md. R. Amin, “Structural and Electrical Properties of Nickel Zinc Ferrite Nanoparticles”, American Journal of Engineering Research (AJER), 2018.

Technical and Vocational Education

F. A. Haolader. 'Environmental Aspect in Technical and Vocational Education and Training (TVET): Current Practices in Service Sectors in Bangladesh' as invited speaker at the 3rd International Conference on TVET in Developing Countries, Ningbo, China, held from 3 to 4 December 2018.

F.A. Haolader. Environmental Aspect in Vocational Education and Training in the OIC Countries: A Case of Automotive Service Sector in Bangladesh. International Summer School of German Alumni Network "Education and Technology Transfer" on Personal Development for Networked Working Environment in the Area of Tension Between Vocational and Academic Education, Dresden and Leipzig, Germany, June 19- 27, 2018.

Importance of Religion on the education policy ; A case study of Bangladesh National Education Report in 2009, Center for Research on Islamic Management & Business. Journal of International Journal of Ethics and Social Science, Vol.4, No. 2 June 2018, ISSN : 2308-5096 (P) ISSN 2311-620x (o), pages-15

Asuma, B., Khan, M. S. H. (2018) Integration of web-based learning into higher education institutions in Uganda: teachers' perspectives, International Journal of Web-Based Learning and Teaching Technologies (IJWLTT), 13 (3), 33-50 (Scopus Indexed)

Khan, M. S. H., Adamu, I., Suleman, A. B. (2018). STEM students' experience on Project Based Learning in Banglades, Paper presented at ERAS-APERA International Conference 2018, organized by National Institute of Education (NIE), Nanyang Technological University, 12 - 14 November 2018.

Nambobi, M. & Khan, M. S. H., Ali, A. A. (2018) Big Data: Prospects and Applications in the Technical and Vocational Education and Training Sector. In Mohiuddin Ahmed & Al-Sakib Khan Pathan (Eds.), Data Analytics: Concepts, Techniques, and Applications, CRC press (Taylor & Francis Group).

F.A. Haoalder. Global independence for solidarity and development. Presented at the 3rd International Songun Study Conference, held in Barisal, Bangladesh, 15-16 February 2018.

Khan, M. S. H. & Markauskaite, L. (2018) Technical and vocational teachers' conceptions of ICT in the workplace: bridging the gap between teaching and professional practice, Journal of Educational Computing Research, 56 (7), 1099-1128. (SSCI + Scopus Indexed): Impact Factor: 3.088

Khan, M. S. H., Shamim, M. R. H, & Nambobi, M. (2018) Learning styles and online tools: How to construct an effective online learning environment, In A.V.Senthil Kumar (Eds.), Optimizing Student Engagement in Online Learning Environments, IGI-global (USA), P. 147 -162 DOI: 10.4018/978-1-5225-3634-5.ch007

Khan, M. S. H., Shamim, M. R. H, & Nambobi, M. (2018). Learning styles and online tools: How to construct an effective online learning environment, In A.V.Senthil Kumar (Eds.), Optimizing Student Engagement in Online Learning Environments, IGI-global (USA), P. 147 -162 DOI: 10.4018/978-1-5225-3634-5.ch007

Computer Science and Engineering

Rahman, A. B. M. A., Karim, M. R., Kushol, R., Kabir M. H. (2018). Performance Comparison of Feature Descriptors in Offline Signature Verification. IUT Journal of Engineering and Technology, 14(1). http://jet.iutoic-dhaka.edu/assets/publishedPaper/14_1_1.pdf

Ahmed Al Marouf, Md. Kamrul Hasan, and Hasan Mahmud, "Fingertip Detection and Finger Identification Approach for Hand Gesture Recognition using Microsoft Kinect", IUT Journal of Engineering and Technology (JET), Volume 14, Issue 1, December, 2018. https: //old.jet.iutoic-dhaka.edu/assets/publishedPaper/14_1_5.pdf

Hasan Mahmud, Md. Kamrul Hasan, Abdullah-Al-Tariq, Md. Hasanul Kabir, and M. A. Mottalib, “Recognition of Symbolic Gestures Using Depth Information”, Advances in Human-Computer Interaction, vol. 2018, Article ID 1069823, 13 pages, 2018. https://doi.org/10.1155/2018/1069823. [ESCI/Web of Science, Scopus, IF 2.9] [Q2: Human-Computer Interaction]

Hasan Mahmud, Md. Kamrul Hasan, Abdullah-Al-Tariq, M. H. Kabir, and M. A. Mottalib, "Recognition of Symbolic Gestures Using Depth Information", Advances in Human-Computer Interaction, vol. 2018, 2018. (ESCI)

Hasan Mahmud, Md. Kamrul Hasan, Abdullah-Al-Tariq, Md. Hasanul Kabir, and M. A. Mottalib, “Recognition of Symbolic Gestures Using Depth Information”, Advances in Human-Computer Interaction, vol. 2018, Article ID 1069823, 13 pages, 2018. https://doi.org/10.1155/2018/1069823.

Md. Abed Rahman, A. M. Esfar E Alam, Md. Kamrul Hasan and Hasan Mahmud, "Towards A Complete Smartphone Based Lifelogging System for Reminiscence", IUT Journal of Engineering and Technology (JET), Volume 14, Number 1, December 2018.

Md. Abed Rahman, A. M. Esfar E Alam, Md. Kamrul Hasan and Hasan Mahmud, "Towards A Complete Smartphone Based Lifelogging System for Reminiscence", IUT Journal of Engineering and Technology (JET), Volume 12, Issue 2, 2018.

M. R. Islam, A. R. M. Kamal, N. Sultana, R. Islam, M. A. Moni, et al., “De- tecting depression using k-nearest neighbors (knn) classification technique,” in 2018 International Conference on Computer, Communication, Chemical, Material and Electronic Engineering (IC4ME2), pp. 1–4, IEEE, 2018.

Ahnaf Munir, Md. Tahmid Rahman Laskar, Md. Sakhawat Hossen Salimur Choudhury., ”A localized fault tolerant load balancing algorithm for RFID systems”, Journal of Ambient Intelligence and Humanized Computing (2018) doi: 10.1007/s12652-018-1114-7

Sayeda Shamma Alia, Md. Nazmul Haque, Sadia Sharmin, Shah Mostafa Khaled, Mohammad Shoyaib, "Bug Severity Classification Based on Class-Membership Information”,2018 Joint 7th International Conference on Informatics, Electronics and Vision (ICIEV) and 2018 2nd International Conference on Imaging, Vision and Pattern Recognition (icIVPR)

Hossen, M.S., Hassan, M.Y., Hussain, F., Choudhury, S., & Alam, M.M. (2018). Relax online resource allocation algorithms for D2D communication. Int. J. Commun. Syst., 31.

F. Ahmed and M. H. Kabir, “Facial expression recognition under difficult conditions: A comprehensive study on edge directional texture patterns,” Int. J. Appl. Math. Comput. Sci., vol. 28, no. 2, pp. 399–409, 2018. (SCIE)

Hossen, M.S., Hassan, M.Y., Hussain, F., Choudhury, S., & Alam, M.M. (2018). Relax online resource allocation algorithms for D2D communication. Int. J. Commun. Syst., 31.

Hussain, F., Hassan, M.Y., Hossen, M.S., & Choudhury, S. (2018). System Capacity Maximization With Efficient Resource Allocation Algorithms in D2D Communication. IEEE Access, 6, 32409-32424.

A. R. Chowdhury, J. Mahmud, A. R. M. Kamal, and M. A. Hamid, “Maes: modified advanced encryption standard for resource constraint environ- ments,” in 2018 IEEE Sensors Applications Symposium (SAS), pp. 1–6, IEEE, 2018.

M. R. Islam, M. A. Kabir, A. Ahmed, A. R. M. Kamal, H. Wang, and A. Ulhaq, “Depression detection from social network data using machine learning techniques,” Health information science and systems, vol. 6, no. 1, p. 8, 2018.

M. A. Hamid, M. Abdullah-Al-Wadud, M. M. Hassan, A. Almogren, A. Alamri, A. R. M. Kamal, and M. Mamun-Or-Rashid, “A key distribu- tion scheme for secure communication in acoustic sensor networks,” Future Generation Computer Systems, vol. 86, pp. 1209–1217, 2018.

Sayeda Shamma Alia, Md Nazmul Haque, Sadia Sharmin, Shah Mostafa Khaled, Mohammad Shoyaib . Bug Severity Classification Based on Class-Membership Information. In 2018 Joint 7th International Conference on Informatics, Electronics & Vision (ICIEV) and 2018 2nd International Conference on Imaging, Vision & Pattern Recognition (icIVPR), 2018

Rahman, A. A., Karim, M. R., Kushol, R., & Kabir, M. H. (2018). Performance Comparison of Feature Descriptors in Offline Signature Verification. IUT Journal of Engineering and Technology (JET), 2018

M. S. Hossen, M. Y. Hassan, F. Hussain, S. Choudhury and M M Alam, "Relax Online Resource Allocation Algorithms for D2D Communication", International Journal of Communication Systems, 2018; 31:e3555. DOI: 10.1002/dac.3555

F. Hussain, M. Y. Hassan, M. S. Hossen and S. Choudhury, "System Capacity Maximization With Efficient Resource Allocation Algorithms in D2D Communication," IEEE Access, vol. 6, pp. 32409-32424, 2018. DOI: 10.1109/ACCESS.2018.2839190

Civil & Environmental Engineering

Roy, A., Hossain, M. and Muromachi, Y. (2018). Enhancing prediction performance of real-time crash prediction models: A Cell Transmission – Dynamic Bayesian Network approach, Transportation Research Record, Vol 2672, Issue 38.

Roy, A., Hossain, M. and Muromachi, Y. (2018). The development of robust real-time crash prediction (RTCP) models with Bayesian Network, Asian Transport Studies, Vol. 5, No. 2, pp. 349-361.

Maghfiroh, M. F. N., Hossain, M. and Hanaoka, S. (2018) Minimizing emergency response time of ambulances through pre-positioning in Dhaka city, Bangladesh. International Journal of Logistics Research and Applications, Vol. 21, pp. No. 1, pp. 53-71.

Raihan, A. Md., Hossain, M., Hasan, T. (2018) Data mining in road crash analysis: The context of developing countries. International Journal of Injury Control and Safety Promotion, Vol. 25, No. 1, pp. 41-52.

HA Khan, A Castel, and AH Mahmood (2018), ‘Performance of fly ash-based geopolymer mortar against sulphuric acid’, 25th Australasian Conference on Mechanics of Structures and Materials (ACMSM25), 4-7 December 2018, Brisbane, Australia.

Anik, M. A. H., Ahmed, F., Atin, F. N., Ahmed, N. T., Mutsuddy, A., Imran, M. A., Haque, N., Zihan, T., Rayhan, R. (2018) Motivating Factors for Private Car Users to Use Public Transport, International Journal for Traffic and Transport Engineering (IJTTE), 8(1):82-98. https://doi.org/10.7708/ijtte.2018.8(1).06  

Sadeek, S.N., Ahmed, A.J.M.M.U., Hossain, M., Hanaoka, S. (2018) Effect of Land Use and Road Network on Crime, Transportation Research Board 97th Annual Meeting Location: Washington DC, United States https://trid.trb.org/view/1497084

Ijaj M. Chowdhury, Istiakur R., Sadman S., Kazi I. Hossain, Shoumic S. Chowdhury, 2018 „Is water available in the public places safe to drink in Bangladesh?‟, 8th Int. Conf. on Geotechnique, Construction Materials and Environment, Kuala Lumpur, Malaysia.

Rahman,I., Sakib,S.S., Nafiz,M.R.K., Alam,S., Chowdhury,M.R.I. (2018). A Study to Improve the Water Quality Parameters of Three Major Rivers Surrounding the Capital City of Bangladesh Through Coagulation, In proceedings of The Eighth International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2018),20-22 November, 2018,Kuala lumpur, Malaysia,pp: 896-901, ISBN: 978-4-909106001 C3051.

Chowdhury,I.M., Rahman,I., Sakib,S.S., Hossain,K.I., Chowdhury,S.S. (2018). Is Water Available in the Public Places Safe to Drinking in Bangladesh?, In proceedings of The Eighth International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2018),20-22 November,2018,Kuala lumpur, Malaysia, pp: 890-895, ISBN:978-4-909106001 C3051

Anik, M. A. H., Shishir, A. R., Islam, P., Naila, S. N., Chowdhury, I. M. (2018) Sustainable Solid Waste Management Through 3R Strategy in Gazipur City, International Journal of Environment and Waste Management, 22(1/2/3/4):228-238. https://doi.org/10.1504/IJEWM.2018.10014719

Mousa, M., Elseifi, M. A., Bashar, M. Z., Zhang, Z., Gaspard, K. (2018). Field Evaluation and Cost-Effectiveness of Crack Sealing in Flexible and Composite Pavements, Transportation Research Record: Journal of the Transportation Research Board

Chowdhury, M. E., Islam, M. S., Islam, M. A., Shahriar, M. S., & Alam, T. (2018). “Development and Calibration of a Portable Artificial Rainfall Simulator for Reproducible Experiments on Soil Erosion”. Global Science and Technology Journal, 6(2), 47–63.

Ahmed, S., Kamal, U., Toha, T. R., Islam, N., and Islam, A. B. M. A. A., “Predicting Human Count through Environmental Sensing in Closed Indoor Settings”, 15th EAI International Conference on Mobile and Ubiquitous Systems: Computing, Networking and Services, November, 2018, New York City, United States.

Anik, M. A. H., Shishir, A. R., Islam, P., Naila, S. N., Chowdhury, I. M. 2018 „Sustainable Solid Waste Management through 3R Strategy in Gazipur City‟, Int. J. of Environment and Waste Management.

Bashar, M. Z. I., Karim, M. R., Imteaz, M. A. (2018). Reliability and economic analysis of urban rainwater harvesting: A comparative study within six major cities of Bangladesh, Resources, Conservation and Recycling, Volume 133, Pages 146-154, ISSN 0921-3449

Mozaher Ul Kabir, Syed Shadman Sakib, Istiakur Rahman and Hossain Md. Shahin. (2018). Performance of ANN model in predicting the bearing capacity of shallow foundations. Paper published in International Symposium on Geotechnics of Transportation Infrastructure (ISGTI 2018), 7th -8th April, Delhi, India.

Kabir, M.I.; Bhowmick, A.K., 2018, ‘Lateral torsional buckling of welded wide flange beams under constant moment’, Canadian Journal of Civil Engineering, vol. 45, pp. 766 – 779, DOI: http://dx.doi.org/10.1139/cjce-2017-0499

Kabir, M.I.; Bhowmick, A.K., 2018, ‘Applicability of North American standards for lateral torsional buckling of welded I-beams’, Journal of Constructional Steel Research, vol. 147, pp. 16 – 26, DOI: http://dx.doi.org/10.1016/j.jcsr.2018.03.029

Sadeek, S. N., Chowdhury, M. T., Rifaat, S. M., Shaheduzzaman, M., Nayem (2018). Analysis of Speed Variations at School Zones in Bangladesh. Journal of Modern Science and Technology 6 (3), 1- 12. (Peer Reviewed)

Islam, N., Saroar, G., and Ahmed, T., “Meteorological Influences on Urban Air Quality Parameters in Dhaka City”, 2nd International Conference on Civil Engineering for Sustainable Development (ICCESD), January, 2018, Bangladesh.

Sobhani, M. G., Azam, S., Nabi, J., and Hossain, M. (2018). “A Framework for Analyzing the Competitiveness of Unconventional Modes of Transportation in Developing City”. Paper accepted for presentation at the 97th Annual Meeting of Transportation Research Board (TRB), Washington, D.C.

A Castel, MSH Khan, AH Mahmood, and SJ Foster (2018), ‘Utilization of steel furnace aggregate in geopolymer concrete for wave-breaker application’, Special Publication, American Concrete Institute (ACI), 326, pp. 25.1-25.10.

Mohammad Zobair Ibne Bashar, Md. Rezaul Karin, and Monzur Alam Imteaz (2018). Reliability and economic analysis of urban rainwater harvesting: A comparative study within six major cities in Bangladesh, Resources, Conservation and Recycling, Elsevier, 133, pp. 146-154

Md. Rezaul Karim, Md Arif Istiaque Khan, Omar Sadab Chowdhury, Redowan Rashid Niloy (2018). Assessment of various methods to remove pathogen from raw water to meet WHO standard for domestic consumption, BICET, 12-14 November, 2018, Universiti Teknologi Brunei, Brunei Darussalam.

S. Rahman, M. R. Karim, Z. H. Mahmud, T. N. Nafiz (2018). Laboratory investigation of the microbiological performance of ceramic water filters as household water treatment technology, BICET, 12-14 November, 2018, Universiti Teknologi Brunei, Brunei Darussalam.

Imtiyaz, M. N., Sobhani, M. G., and Hossain, M. (2018). “Simulating Hazardous Traffic Conditions on Urban Expressways - A Micro-simulation Approach”. 4th International Conference on Civil Engineering for Sustainable Development (ICCESD), Khulna, Bangladesh.

H. M. Shahin (2018): Multi-lane Road Tunnel under the River Karnaphuli – The First Tunnel Project in Bangladesh, International Conference on Research & Innovation in Civil Engineering, Bangladesh, January.

K. I. Ahmad, M. Abrar, S. A. Shafian and H. M. Shahin (2018), Correlation among the soil parameters of the Karnaphuli river tunnel project, International Journal of GEOMATE. Vol.15, Issue 48, pp. 89-90.

M.A. Rahman, H. M. Shahin and T. Nakai (2018), Stress-strain-dilatancy relationships of normally consolidated Dhaka clay, International Journal of GEOMATE. Vol.15, Issue 51, pp. 188-194.

M. U. Kabir, H. M. Shahin, S.S. Sakib and I. Rahman (2018): Performance of ANN model in predicting the Bearing Capacity of Shallow Foundations, International Symposium on Geotechnics of Transportation Infrastructure, Delhi, India, April.

T. Nakai and H. M. Shahin (2018): A single hardening elastoplastic model for describing stress path dependency of plastic flow, 4th International Symposium on Computational Geomechanics, Assisi, Italy, May.

Y. Morikawa, H. M. Shahin and T. Nakai (2018): Effective method to increase ground stiffness and bearing capacity in 2D and 3D flat foundations, Proc. of the 7th China-Japan Geotechnical Symposium, Japan, June.

T. Hashimoto, Y. Liu, T. Nakai, H. M. Shahin, Y. Zhu and G. Dong (2018): Numerical Investigation of Impact of Non-circular Tunneling in Sensitive Soft Clay Layers, Proceedings of China-Europe Conference on Geotechnical Engineering, Springer Nature Switzerland AG, Vienna, Austria, August.

T. Nakai, H. M. Shahin (2018): Modeling of elastic deformation of geomaterials without generating tension stress, Proc. of the 53rd Annual Conference of Japanese Geotechnical Society, Japan, July.

Business and Technology Management

Hossain, M.N., Talukder, M.S., Hoque, M.R. and Bao, Y. (2018), "The use of open government data to citizen empowerment: an empirical validation of a proposed model", Foresight, Vol. 20 No. 6, pp. 665-680. ESCI, Scopus (Q1). CABS. https://doi.org/10.1108/FS-03-2018-0027

Social Networking and Business Plan Development: Antecedents and Outcomes. School of management, Huazhong University of Science and Technology, Wuhan, China.

Benazir, R., Shobnom, M., & Sohel Rana, S. M. (2018). An empirical investigation on the factors influencing customers’ decision in choosing banks. International Journal of Business and Technopreneurship, 8(3), 329-338.

Munira, S., Amin, M., & Akter, A. (2018). An Investigation of the Factors Influencing Employees’ Behavioral Intention to Use AIS in Bangladesh. ASA University Review, 12(1), 77-84.

Effects of Remittance and FDI on The Economic Growth of Bangladesh,"International Journal of Economics, Business and Management Research

Revisiting the Existing Credit Rating Methods of Small and Medium Enterprises,Indonesian Journal of Business Finance and Accounting

2017 (161)

Mechanical and Production Engineering

Md. Anayet U. Patwari, Mohammad Ahsan Habib, Md. Firoz Mahmud, Md. Minhazul Islam [2017] “Improvement of Surface Profile of Different Materials by Hot Air in Turning Process” ICMIME, RUET 2017.

Md. Anayet U. Patwari, Mohammad Ahsan Habib, Md. Saiful Islam, Md. Sayeed Ul Hasan [2017] “Development of a thermo-acoustic device for cooling effect in machining processes” ICMIME, RUET 2017.

Effect of Transitional Metal Ions on Photodegradation of Remazol Black B (RBB) in the Aqueous Suspension of ZnO under Solar Light Irradiation Md. Obaidullah, M.J. Miah, Md.N. Kayes, N. Suzuki, Md.M. Hossain: J. Adv. Chem. Sci. - Volume 3 Issue 1 (2017) 445–448.

M. Islam, F. Mahmud, M. A. Habib, Md. A. U. Patwari, “Improvement of Surface Profile of Different Materials by Hot Air in Turning Process” 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) at: RUET, Rajshahi, Bangladesh.

S. U. Hasan, Md. A. U. Patwari, M. A. Habib, S. Islam, “Development of Thermo Acoustic Device for Cooling Effect in Machining Process” 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) at: RUET, Rajshahi, Bangladesh

Sayedus Salehin, M Monjurul Ehsan, Syed Rafat Faysal, A K M Sadrul Islam, “Utilization of Nanofluid in Various Clean Energy and Energy Efficiency Applications”, in M M K Khan, AA Chowdhury and Nur M S Hassan eds. ‘Application of Thermo-fluid Processes in Clean Energy Technologies: Key Issues and Recent Developments for a Sustainable Future’, pp: 3-33, Springer, Singapore (ISBN: 978-981-10-0695-1) (October 2017) [https://link.springer.com/chapter/10.1007/978-981-10-0697-5_1]

Synthesis, chiral resolution and optical properties of amphiphilic oxa[9]helicene derivatives, Mohammad Shahabuddin, Md Jalil Miah, Ken-ichi Iimura, Takao Kimura, Michinori Karikomi:Tetrahedron Letters 58 (2017) 1334–1337

Preparation of ZnO, Its Characterization and Effectiveness in Waste Water Treatment, Md Jalil Miah, Md. Nazmul Kayes, Md Obaidullah, Md Mofazzal Hossain: Res J. Chem. Environ. Sci. Vol 4 [4] August 2016: 50-57.

Habibullah, Mohammad, Khizir Mahmud, Günnur Koçar, AKM Sadrul Islam, and Sayedus Salehin, "Economic challenges of hybrid microgrid: An analysis and approaches for rural electrification", 7th BSME International Conference on Thermal Engineering, 22–24 December 2016, Dhaka, Bangladesh. In AIP Conference Proceedings, vol. 1851, no. 1, p. 020043. AIP Publishing, 2017 [https://aip.scitation.org/doi/abs/10.1063/1.4984672]

T.M. Abir Ahsan, Chowdhury Sadid Alam, Md. Mustafizur Rahman, A. K. M. Sadrul Islam, 2017, “Solar Chimney for Natural Ventilation: A Review”, AIP Conference Proceedings, 1851(1).

Md. Anayet U. Patwari, Mohammad Ahsan Habib , Md. Firoz Mahmud 1, Md. Minhazul Islam , “Investigation of surface parameters during hot air streaming turning process of mild steel” AIP Proceedings. June 2017.

Md. Anayet U. Patwari, Mohammad Ahsan Habib, Md. Tanzib Ehsan, Md Golam Ahnaf, S.I. Chowdhury[2017], Innovative Green Cooling Approach Using Peltier Chip in Milling Operation for Surface Roughness Improvement, ICMSE, Istanbul, Turkey

Md. Anayet U. Patwari, Mohammad Ahsan Habib, Md. Tanzib Ehsan, Md Golam Ahnaf, S.I. Chowdhury, [2017] “Innovative Green Cooling Approach Using Peltier Chip in Milling Operation for Surface Roughness Improvement”, International Journal of Industrial and manufacturing Engineering, Volume: 4, Issue 7,

DECOLORIZATION OF REMAZOL BLACK B IN AQUEOUS SUSPENSION OF TIO2, Md Jalil Miah, Muhammad Tareq Aziz, Md. Nazmul Kayes, Md. Obaidullah, Md.Mufazzal Hossain:British Journal of Environmental Sciences Vol.5, No.2, pp.51-70 April 2017.

Hasanuzzaman, M., Rashid, A., and Olabi, A., Characterization of Porous Glass and Ceramics by Mercury Intrusion Porosimetry, Reference Module in Materials Science and Materials Engineering, Elsevier; pp. 1-9, 2017.

Syed Shaheer Uddin Ahmed, Sayedus Salehin, M Mustafizur Rahman, A K M Sadrul Islam, “Harvesting Solar Energy: Fundamentals and Applications”, in P. Mondal, A.K. Dalai eds. ‘Sustainable Utilization of Natural Resources’, pp: 381-416, CRC Press, 2017 (ISBN: 978-1-4987-6183-3) (March 2017) [https://www.taylorfrancis.com/books/e/9781315153292/chapters/10.1201/9781315153292-13]

MR Karim, Jamal Naser, Numerical modelling of solid biomass combustion: difficulties in initiating the fixed bed combustion, Energy Procedia (2017), Vol. 110, pp. 390-395. DOI: https://doi.org/10.1016/j.egypro.2017.03.158 (Impact Factor: 2.63, Elsevier, Scopus Indexed Journal)

M. Nasim, M. Brasca, S.F. Khosroshahi, U. Galvanetto, Understanding the impact properties of polymeric sandwich structures used for motorcyclists' back protectors, Polymer Testing; 61: 249-257 (2017). dx.doi.org/10.1016/j.polymertesting.2017.05.025

Ashraf, S., Mahmud, M., Akram, M., Rashid, A., Rahman, M., and Tanvir, M., The Practice of Kaizen Tool in the Apparel Industry of Bangladesh for Process Improvement and Development of Ergonomics Standard, International Research Journal of Engineering and Technology (IRJET) , Volume 4, Issue 10 , S.NO: 323, pp 1747 – 1754, 2017.

Md. Mustafizur Rahman, Sayedus Salehin, Syed Shaheer Uddin Ahmed, A K M Sadrul Islam, “Environment Impact Assessment of Different Renewable Energy Resources: A Recent Development”, in M G Rasul, A K Azad and S Sharma eds. ‘Clean Energy for Sustainable Development: Contrasts and New Approaches’, pp: 29-71, Academic Press, Elsevier (January 2017) [https://www.sciencedirect.com/science/article/pii/B9780128054239000028]

Arafat A. Bhuiyan, AS Blicblau, J Naser, Co-firing of biomass and slagging in industrial furnace: A review on modelling approach. Journal of the Energy Institute, vol.90(6): p.838-854, 2017.

Arafat A. Bhuiyan, J Naser, Development of 3D transient wall filming mechanism during combustion by coupling Eulerian-Lagrangian approach and particle-wall interaction model. Applied Thermal Engineering, vol. 112: p. 911–923, 2017.

Anang, N. A., Abdullah, L., Jamaludin, Z., Chiew, T. H., Maharof, M., Salim, S. N. S., Retas, Z., and Junoh, S. C. K., 2017. Tracking Performance of NPID Controller for Cutting Force Disturbance of Ball Screw Drive. Journal of Mechanical Engineering and Sciences, 11(4), pp. 3227-3239.

M Monjurul Ehsan, Salehin, M, Islam, A K M Sadrul Islam “Investigation of thermal and hydrodynamic behavior of Al2O3-water nanofluid through a rough parallel plate”, Volume 14, Issue 3 pp. 4432-4447 September 2017, International Journal of Automotive and Mechanical Engineering, Universiti Malaysia Pahang Publishing, Malaysia. (Scopus Indexed Journal). https://doi.org/10.15282/ijame.14.3.2017.4.0351

Salehin, Musfequs, M Monjurul Ehsan, and A K M Sadrul Islam. "Heat transfer enhancement and pumping power optimization using CuO-water nanofluid through rectangular corrugated pipe." AIP Conference Proceedings. Vol. 1851. No. 1. AIP Publishing, USA, 2017. (Scopus Indexed Journal). https://aip.scitation.org/doi/abs/10.1063/1.4984725

M Salehin, M Monjurul Ehsan, A K M Sadrul Islam, “Performance Evaluation of Nanofluid for Heat Transfer Enhancement and Pumping Power Reduction through a Semicircular Corrugated Pipe”. AMSE JOURNALS-AMSE IIETA publication-2017-Series: Modelling, Measurement and Control B; Canada, Vol. 86; No-1; pp 296-311. (Scopus Indexed Journal). http://iieta.org/sites/default/files/Journals/MMC/MMC_B/86.01_20.pdf

M Monjurul Ehsan, Xurong Wang, Zhiqiang Guan, A Y Klimenko, “Modeling of A Dry Cooling Unit Operated with Supercritical CO2 in 25 MW NDDCT”, Proceedings of 88th IASTEM International Conference, 4-5 November, 2017, Sydney, Australia. (Excellent paper award).

Salehin, Musfequs, M Monjurul Ehsan, and A K M Sadrul Islam. "Heat transfer enhancement and pumping power optimization using CuO-water nanofluid through rectangular corrugated pipe", 7th BSME International Conference on Thermal Engineering, December, 2017, Dhaka, Bangladesh.

M. Nasim, M.A. Karim, S.I. Khan, M.H. Noor, Decision tree based approach to control the efficiency of a hybrid PV/T solar system in Bangladesh, Distributed Generation & Alternative Energy Journal; 32: 17-48 (2017). doi.org/10.1080/21563306.2017.11824267.

Chiew, T.H., Jamaludin, Z., Bani Hashim, A.Y., Abdullah, L., Rafan, N.A., Maharof, M. 2017. Second Order Sliding Mode Control for Direct Drive Positioning System. Journal of Mechanical Engineering and Sciences 11(4), pp. 3206.

Maharof, M., Jamaludin, Z., Minhat, M., Anang, N.A., Chiew, T.H., and Jamaludin, J., 2017. Design and Analysis of Disturbance Force Observer for Milling Cutting Force Compensation. International Journal of Mechanical and Mechatronics Engineering,17(5), pp. 53-59.

Electrical and Electronic Engineering

Fahim Abid, Kaveh Niayesh, Erik Jonsson, Nina Støa-Aanensen and Magne Runde, "Arc Voltage Characteristics in Ultrahigh-Pressure Nitrogen Including Supercritical Region," in IEEE Transactions on Plasma Science, vol. 46, no. 1, pp. 187-193, Jan. 2018.

M. M. Hasan, M. M. Billah, and J. Jang, Tensile stress effect on the performance of a-IGZO TFTs with source/drain offsets. IEEE Electron Device Letters 39(2), 204-207, 2018. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

A. B. Rahaman, M. M. Hasan, Y. Chen, J. G. Um, M. M. Billah, and J. Jang, Excellent Temperature Sensing Device with Coplanar a-IGZO TFT Ring Oscillator, In Proc. 24nd International Display Workshop (IDW), 2017, Sendai, Japan.

M. M. Billah, M. M. Hasan, A. Rahaman, J. U. Han, M. G. Hwang, and J. Jang, Study on Generation of Acceptor-like Defect States under PBTS and Performance Recovery in a-InGaZnO TFTs using TCAD, In Proc. 27th International Conf. on Amorphous and Nanocrystalline Semiconductors (ICANS), 2017, Seoul, Korea.

M. M. Hasan, M. M. Billah, N. N. Mude, J. G. Um and J. Jang. Bending stress-induced performance change in plastic oxide thin-film transistor and recovery by annealing at 300° C. IEEE Electron Device Letters 38(8), 1035-1038, 2017. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

M. M. Billah, M. M. Hasan, D. Y. Jeong, J. G. Um, and J. Jang, Effect of a‐IGZO Thickness Variation on Device Uniformity and Drain Currents for Dual and Single Gate Driving TFTs, In Proc. SID Display Week Symposium Digest of Technical Papers 48(1), 1528, 2017, Los Angeles, California, USA.

M. M. Billah, M. M. Hasan, and J. Jang, Effect of Tensile and Compressive Bending Stress on Electrical Performance of Flexible a-IGZO TFTs. IEEE Electron Device Letters 38(7), 890-893, 2017. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

N. K. Tak, W. S. Lee, S. H. Kim, I. C. Choi, J. Y. Kim, J. U. Han, J. H. Choi, M. G. Hwang, J. G. Um, S. H. Lee, M. M. Billah, and J. Jang, Calibration of a‐InGaZnO Thin Film Transistors with Various Channel Lengths using TCAD Simulation, In Proc. SID Display Week Symposium Digest of Technical Papers 48(1), 1536, Los Angeles, California, USA.

M. M. Billah and J. Jang, Millisecond positive bias recovery of negative bias illumination stressed amorphous InGaZnO thin-film transistors. IEEE Electron Device Letters 38 (4), 477-480, 2017. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

M. W. Rahman, S. M. Abdullah, M. A. Bakth, Q. N. U. Islam and M. A. Hoque: "Numerical analysis of stacked layered CZTS and CZTSe-based thin film solar cell", 2017 International Conference on Electrical, Computer and Communication Engineering (ECCE), Cox's Bazar, 2017, pp. 115-118. doi: 10.1109/ECACE.2017.7912891

Muhammad Rezaul Hoque Khan, Muhammad Fokhrul Islam, Golam Sarwar, Md. Taslim Reza and Md. Ashraful Hoque (2017). “Carrier generation using a dual-frequency distributed feedback waveguide laser for phased array antenna (PAA).” Journal of the European Optical Society-Rapid Publications, Volume-13, Article number-30.

Muhammad Rezaul Hoque Khan, Muhammad Fokhrul Islam, Golam Sarwar, Md. Taslim Reza and Md. Ashraful Hoque (2017). “Performance analysis of microwave carrier for Ku-band satellite signal.” International Journal of Computer Science and Network Security, Volume-17, Issue-4.

M. W. Rahman, S. M. Abdullah, M. A. Bakth, Q. N. U. Islam and M. A. Hoque, "Numerical analysis of stacked layered CZTS and CZTSe-based thin film solar cell," 2017 International Conference on Electrical, Computer and Communication Engineering (ECCE), Cox's Bazar, 2017, pp. 115-118, doi: 10.1109/ECACE.2017.7912891.

Khan, M. R. H., Islam, M. F., Sarowar, G., Reza, T., & Hoque, M. A. (2017). Carrier generation using a dual-frequency distributed feedback waveguide laser for phased array antenna (PAA). Journal of the European Optical Society-Rapid Publications, 13(1), 30.

K. Akter, G. Sarowar, and A. Hoque, “Open Access An Approach of Improving Performance of the Single Phase AC- DC Sepic Converter,” American Journal of Engineering Research, no. 3, pp. 3–7, 2017.

M. R. H. Khan, M. F. Islam, G. Sarowar, T. Reza and M. A. Hoque, “Performance analysis of microwave carrier for Ku-band satellite signal”, International Journal for Computer Science and Network Security, Vol. 17 No. 4 pp. 4-13, Korea, April 2017.

Rahman, M. W., Abdullah, S. M., Bakth, M. A., Islam, Q. N. U., & Hoque, M. A. (2017, February). Numerical analysis of stacked layered CZTS and CZTSe-based thin film solar cell. In Electrical, Computer and Communication Engineering (ECCE), International Conference on (pp. 115-118). IEEE.

Mohammad, S., Tousif, M. N., Ferdous, A. A., Hoque, M. A., & Rahman, M. W. (2017, July). Numerical analysis of CZTS solar cell with IniSs buffer layer: A study of a CZTS based thin film solar cell, concerning the effects of several parameters on its electrical performance. In Smart Grid and Smart Cities (ICSGSC), 2017 IEEE International Conference on (pp. 55-60). IEEE.

Sakib Mohammad, Md Noumil Tousif, AA Ferdous, Dr. Md Ashraful Hoque, Mohammad Wahidur Rahman; “Numerical analysis of CZTS solar cell with IniSs buffer layer: A study of a CZTS based thin film solar cell, concerning the effects of several parameters on its electrical”; IEEE International Conference on Smart Grid and Smart Cities (ICSGSC), 2017, pp. 55-60.

Md. Abdullah Al Hysam, Md. Zihad Ul Haque, Khalid Saifullah, Sakif Asif, Golam Sarowar and Dr. Md. Ashraful Hoque, “Bridgeless AC-DC Buck-Boost Converter with Switched Capacitor for Low Power Applications”, IEEE Region Ten Conference, Malaysia, November 2017.

M. Al Mamun and Golam Sarowar, Dr. Md. Ashraful Hoque, Abdullah Al Mahfazur Rahman, “A Novel Non Isolated DC-DC Step up Converter for Photovoltaic Systems”, 4th IEEE International Conference on Advances in Electrical Engineering, Bangladesh, October 2017

Khan, M. R. H., M. A. Hoque, et al. (2017). "Carrier generation using a dual-frequency distributed feedback waveguide laser for phased array antenna (PAA)." Journal of the European Optical Society-Rapid Publications (Springer Nature) 13(1): 30.

Khan, M. R. H., M. A. Hoque, et al. (2017). "Performance analysis of microwave carrier for Ku-band satellite signal." International Journal of Computer Science and Network Security 17(4): 4-13.

Mirza Fuad Adnan, Mohammad Abdul Moin Oninda, Mirza Muntasir Nishat, Nafiul Islam, “Design and Simulation of a DC - DC Boost Converter with PID Controller for Enhanced Performance,” IJERT, 2017.

Adnan, Mirza Fuad, Mohammad Abdul Moin Oninda, Mirza Muntasir Nishat, and Nafiul Islam. "Design and simulation of a dc-dc boost converter with pid controller for enhanced performance." International Journal of Engineering Research & Technology (IJERT) 6, no. 09 (2017): 27-32.

Technical and Vocational Education

Khan, M. S. H. (2017). Memorization or Understanding: What do we really want from TVET students? Paper presented at the International Conference on Skills for the Future World of Work and TVET for Global Competitiveness Dhaka, Bangladesh, 27-29 July 2017.

Adamu, I & Khan, M. S. H. (2017) Project Based Learning: How it has impact on students' learning Technical Education of Bangladesh Paper presented at the International Conference on Skills for the Future World of Work and TVET for Global Competitiveness Dhaka, Bangladesh, 27-29 July 2017.

F.A. Haolader. "A Draft Model for Green Skills Inclusion in Recognition, Validation, and Accreditation (RVA)." The Symposium on Green Skills in Non-Formal Learning Settings: A Comparative Study in Asia organised by the UNESCO Institute for Lifelong Learning (UIL) held in Manila, Philippines, from 22 to 24 September 2017.

Hasan, M. (2017 September 16). Phenomenography: A research methodology to understand how engineering students learn [Paper presentation]. The 20th Postgraduate Research Community Conference on Colliding ideas: Breaking open educational impact to engage with diverse communities, School of Education, The University of Queensland, Brisbane, Australia

Kassim, K & Khan, M. S. H. (2017). Need for implementing Massive Open Online Courses (MOOCs) in developing country: a case of Uganda, Paper accepted at BERA annual conference, University of Sussex, Brighton, UK, 05-07 September, 2017

F.A. Haolader, A.A. Mamun, and M. Aktaruzzaman. "A Comparative Study on S.S.C (VOC.) and DAKHIL (VOC.) Student Performance at Secondary Schools and Madrasas in Bangladesh." The IDEB-CPSC International Conference on "Skills for the Future World of Work and TVET for Global Competitiveness", Dhaka, Bangladesh, 27 to 29 July 2017.

F.A. Haolader, S.N. Ahmed and M. Sajid. "Environmental Aspect in Technical and Vocational Education and Training: Current Practices in Automotive Service Sector in Bangladesh." The IDEB-CPSC International Conference on "Skills for the Future World of Work and TVET for Global Competitiveness", Dhaka, Bangladesh, 27 to 29 July 2017.

Mubarak, H. R, & Khan, M. S. H. (2017). Students' Conception of Good Teaching in Engineering Education of Bangladesh, Paper presented at 1st International GCSTMR Congress, Dhaka, Bangladesh, 04 - 05 February 2017.

Hasan, M., Wright, T., & Karim, A. (2017, June 27-30). University students' approaches to project-based learning (PBL): An Engineering context [Paper presentation]. Higher Education Research and Development Society of Australasia Conference (HERDSA), International Convention Centre Sydney (ICC Sydney), Australia

Khan, M. S. H. & Markauskaite, L. (2017). Approaches to ICT-enhanced teaching in technical and vocational education: a phenomenographic perspective. Higher Education, 73(5), 691-707 (SSCI + Scopus Indexed): Impact Factor: 4.634

F.A. Haolader. 'Technical and Vocational Teacher Education in the OIC Countries. 'International Workshop on Work Process-Oriented Vocational Education, organised by the Institut fur Berufspadagogik und Berufliche Didaktiken of Technische Universitat Dresden, the Universitat Leipzig and the Yogyakarta State University held in Yogyakarta, Indonesia, on 27 to March 31, 2017.

Khan, M. S. H., Nambobi, M., & Ali, M. S. (2017) MOOCs in TVET Sectors of Developing Countries: Benefits, Possibilities, and Challenges. In Frank Giuseffi (Eds.), Handbook of Research on Self-Directed Learning Strategies in the Digital Age, IGI-global (USA), P. 22 - 47

F. A. Haolader, W. Hakim1, K. Kasim and H.R. Mubarak. A Comparative Study on the Academic Performance of Students in Bachelor’s Degree of Information Technology Having Arts and Science Background in Uganda. World Journal of Educational Research ISSN 2375-9771 (Print) ISSN 2333-5998 (Online), Vol. 4, No. 2, 257 – 273. March 2017, http://www.scholink.org/ojs/index.php/wjer.

Bibi, S. & Khan, M. S. H. (2017) TPACK in Action: A Study of a Teacher' Thoughts When Planning to Use ICT, Australasian Journal of Educational Technology, 33(4), 70-87. (SSCI + Scopus Indexed) Impact Factor: 3.067

Al Mamun, M. A., Lawrie, G., Wright, T. (2017). Design and development of online learning modules for self-directed study. Curriculum Transformation. The 40th annual conference of the Higher Education Research and Development Society of Australasia (HERDSA), June 2017, Sydney: International Convention Centre, Darling Harbor

Khan, S. H., Hasan, M., & Rabbani, K. M. M. G. (2017). Current Trends and Issues in TVET of Bangladesh. In U. C. Okolie & A. M. Yasin (Eds.), Technical Education and Vocational Training in Developing Nations. United States of America: IGI Global

Khan, M. S. H., Hasan, M., Rabbani, K. M. M. G. (2017). Current trends and issues in TVET in Bangladesh. In Ugochukwu Chinonso Okolie & Asfa M. Yasin (Eds.), Technical Education and Vocational Training in Developing Nations: IGI-global (USA), P. 131-153 DOI: 10.4018/978-1- 5225-1811-2.ch007

Faruque A. Haolader & Shahadad H. Khan. Inclusion of Green Competencies in the Recognition of Prior Learning: Current Practices in Bangladesh. In: M. Pavlova and M. Singh (Eds) Recognizing Green Skills in Non-formal Learning Settings - A Comparative Study in Asia. Draft accepted by Springer International Publishing, Germany (in press).

F. A. Haolader, D. Cicioglu, & , K. Kassim. A Model of Technical and Vocational Teacher Education at Bachelor's Degree Level and its Relevance to the Occupational Tasks of TVET Teachers in the OIC Member States. In: TVET@Asia, issue 8, 1-19. January 2017 Online: http://www.tvet-online.asia/issue8/haolader

Zayyana, A. I., Raihan, M.A., Clement, C.K., Baba, M.M. (2017). Determining the role of e-Learning materials in technical and vocational institutions in Katsina State, Nigeria. International Journal of Science & Engineering Research, ISSN 2229-5518. September, 2017.

Haque, M. A., Raihan, M.A., & Clement, C.K., (2017). Compare the effectiveness of digital content teaching and traditional teaching to academic achievement: Reference to the selected technical school and college in Bangladesh, International Journal of Education and Evaluation, International Institute of Academic Research and Development (IIARD) Publishing Company, www.iiardpub.org, Africa, Nov. 2016.

Ahmadu, L., Raihan, M.A., Clement, C.K., Baba, M.M. (2017). A study to identify factors affecting students academic performance in technical subjects in technical colleges in Katsina State, Nigeria. International Journal of Science & Engineering Research, ISSN 2229-5518. September, 2017.

Aktaruzzaman, M. Shamim, R.H.M., Khan, S.H. & Raihan ,M.A. (November, 2017). Assessing the need of work integrated curriculum in Open and distance learning in Bangladesh: A community perspective, Australian Association for Research in Education (AARE), 26-30 November 2017, Abstract No. 56. (International Conference)

Marium Sarkar, Raihan, M.A. (July, 2017). A study to identify strengths and challenges for implementation of recognition of prior learning (RPL): reference to the selected government technical training centers in Bangladesh, International conference on Skills for the Future World of Work and TVET for Global Competitiveness, Organized by Institution of Diploma Engineers, Bangladesh (IDEB), Bangladesh and Colombo Plan Staff College (CPSC), Manila, 27-29 July 2017, IDEB, Dhaka, pp.108. (International Conference)

Nazmin Mahmuda Lina, Raihan, M.A. (July, 2017). A study to identify major strengths and weakness of Apprenticeship programs in TVET: case of selected Government Polytechnics Institutes in Bangladesh, International conference on Skills for the Future World of Work and TVET for Global Competitiveness, Organized by Institution of Diploma Engineers, Bangladesh (IDEB), Bangladesh and Colombo Plan Staff College (CPSC), Manila, 27-29 July 2017, IDEB, Dhaka, pp.123. (International Conference)

Mukasa Abubakari J. Mubiru, Raihan, M.A. (July, 2017). Web-Based Human Computer Interaction Approach of Computer Programming Courses in TVET to Enhance Learning: Context of Uganda, International conference on Skills for the Future World of Work and TVET for Global Competitiveness, Organized by Institution of Diploma Engineers, Bangladesh (IDEB), Bangladesh and Colombo Plan Staff College (CPSC), Manila, 27-29 July 2017, IDEB, Dhaka, pp.121. (International Conference)

Raihan, M.A. (February, 2017). Interface Design, Emotions and Multimedia Learning for TVET. 1st International Congress Global Circle for Scientific, Technological and Management Research (GCSTMR) in Association with GCSTMR, Sydney, Australia and Hosted by BOU, DU, IUT & DUET on 4-5 February 2017, p.22. (International Congress)

Raihan, M.A. (July, 2017). Enhancing aesthetic value of TVET to empower graduates through entrepreneurship skills for social cohesion, inclusive growth, and sustainable development: Context of Bangladesh, International conference on Skills for the Future World of Work and TVET for Global Competitiveness, Organized by Institution of Diploma Engineers, Bangladesh (IDEB), Bangladesh and Colombo Plan Staff College (CPSC), Manila, 27-29 July 2017, IDEB, Dhaka, pp.93. (International Conference)

Zayyana, A. I., Raihan, M.A., Clement, C.K., Baba, M.M. (2017). Determining the role of eLearning materials in technical and vocational institutions in Katsina State, Nigeria. International Journal of Science & Engineering Research, ISSN 2229-5518. September, 2017.

Haque, M. A., Raihan, M.A., & Clement, C.K., (2017). Compare the effectiveness of digital content teaching and traditional teaching to academic achievement: Reference to the selected technical school and college in Bangladesh, International Journal of Education and Evaluation, International Institute of Academic Research and Development (IIARD) Publishing Company, www.iiardpub.org, Africa, Nov. 2016.

Ahmadu, L., Raihan, M.A., Clement, C.K., Baba, M.M. (2017). A study to identify factors affecting students academic performance in technical subjects in technical colleges in Katsina State, Nigeria. International Journal of Science & Engineering Research, ISSN 2229-5518. September, 2017.

Al Mamun, M. A. (2017). Use of questions to support student’s scientific inquiry in self-directed online learning. The 22nd Postgraduate Research Community Conference on “Colliding Ideas: Breaking Open Educational Impact to Engage with Diverse Communities.” The University of Queensland, Brisbane.

Computer Science and Engineering

Kabir, K. Habibul, Ashraful Alam Khan, Ashir Ahmed, Masahiro Sasabe, and K. Hasibul Kabir. 2017. "Ferry Assisted Delay Tolerant Networking Approach For Carrying Healthcare Digital Data In Disconnected Communities". In International Conference on Healthcare, SDGs and Social Business (SocialTech). Tokyo: Social Business Academia Network.

Ahmed Al Marouf, Md. Kamrul Hasan and Hasan Mahmud. Fingertip Detection and Finger Identification Approach for Hand Gesture Recognition using Microsoft Kinect. IUT Journal of Engineering and Technology (JET), Volume 14, Number 1, December 2018.

S. M. Shahnewaz, Husne Ara Rubaiyeat, Hasan Mahmud, Md. Kamrul Hasan, "A Scenario Based API Recommendation System Using Syntax and Semantics of Client Source Code", IUT Journal of Engineering and Technology (JET), Volume 2, Issue 1, September 2017.

Y. Hassan, F. Hussain, S. Hossen, S. Choudhury and M. M. Alam, "Interference Minimization in D2D Communication Underlaying Cellular Networks," in IEEE Access, vol. 5, pp. 22471-22484, 2017, doi: 10.1109/ACCESS.2017.2763424.

S. M. Shahnewaz, Husne Ara Rubaiyeat, Hasan Mahmud, Md. Kamrul Hasan, "A Scenario Based API Recommendation System Using Syntax and Semantics of Client Source Code", IUT Journal of Engineering and Technology (JET), Volume 13, Number 1, December 2016.

Mottalib, M. A., Arnob, R. I., Sony, M. R. K., & Akter, L. (2017). Advanced Agglomerative Clustering Technique for Phylogenetic Classification Using Manhattan Distance. In Proceedings of the International Conference on Bioinformatics & Computational Biology (BIOCOMP) (pp. 9-13). The Steering Committee of The World Congress in Computer Science, Computer Engineering and Applied Computing (WorldComp).

A. Al-Tariq, A. R. M. Kamal, M. A. Hamid, M. Abdullah-Al-Wadud, M. M. Hassan, and S. M. M. Rahman, “A scalable framework for protecting user identity and access pattern in untrusted web server using forward secrecy, public key encryption and bloom filter,” Concurrency and Computation: Practice and Experience, vol. 29, no. 23, p. e3863, 2017.

Hassan, M.Y., Hussain, F., Hossen, M.S., Choudhury, S., & Alam, M.M. (2017). A near optimal interference minimization resource allocation algorithm for D2D communication. 2017 IEEE International Conference on Communications (ICC), 1-6.

R. Kushol, M. H. Kabir, M. S. Salekin, and A. B. M. A. Rahman, “Contrast enhancement by top-hat and bottom-hat transform with optimal structuring element: Application to retinal vessel segmentation,” in International Conference on Image Analysis and Recognition (ICIAR), 2017, pp. 533–540.

Hussain, F., Hassan, M.Y., Hossen, M.S., & Choudhury, S. (2017). An optimal resource allocation algorithm for D2D communication underlaying cellular networks. 2017 14th IEEE Annual Consumer Communications & Networking Conference (CCNC), 867-872.

Hassan, M.Y., Hussain, F., Hossen, M.S., Choudhury, S., & Alam, M.M. (2017). A near optimal interference minimization resource allocation algorithm for D2D communication. 2017 IEEE International Conference on Communications (ICC), 1-6.

Kushol, Rafsanjany, Md Hasanul Kabir, Md Sirajus Salekin, and ABM Ashikur Rahman. "Contrast enhancement by top-hat and bottom-hat transform with optimal structuring element: Application to retinal vessel segmentation." In Image Analysis and Recognition: 14th International Conference, ICIAR 2017, Montreal, QC, Canada, July 5–7, 2017, Proceedings 14, pp. 533-540. Springer International Publishing, 2017.

M. H. Kabir, M. S. Salekin, M. Z. Uddin, and M. Abdullah-Al-Wadud, “Facial expression recognition from depth video with patterns of oriented motion flow,” IEEE Access, vol. 5, pp. 8880–8889, 2017. (SCIE)

Hassan, Y., Hussain, F., Hossen, S., Choudhury, S., & Alam, M.M. (2017). Interference Minimization in D2D Communication Underlaying Cellular Networks. IEEE Access, 5, 22471-22484.

A. R. M. Kamal and M. A. Hamid, “Supervisory routing control for dynamic load balancing in low data rate wireless sensor networks,” Wireless Networks, vol. 23, no. 4, pp. 1085–1099, 2017.

Sadia Sharmin, Amin Ahsan Ali, Muhammad Asif Hossain Khan, Mohammad Shoyaib . Feature selection and discretization based on mutual information. In 2017 IEEE International Conference on Imaging, Vision & Pattern Recognition (icIVPR), 2017

Sadia Sharmin, Farzana Aktar, Amin Ahsan Ali, Muhammad Asif Hossain Khan, Mohammad Shoyaib . Bfsp: A feature selection method for bug severity classification. In 2017 IEEE Region 10 Humanitarian Technology Conference (R10-HTC), 2017

Lota, L.N. and Hossain, B.M., 2017. A systematic literature review on sms spam detection techniques. International Journal of Information Technology and Computer Science, 9(7), pp.42-50.

Kushol, R., Kabir, M. H., Salekin, M. S., & Rahman, A. A. (2017, July). Contrast enhancement by top-hat and bottom-hat transform with optimal structuring element: application to retinal vessel segmentation. In International Conference Image Analysis and Recognition (pp. 533-540). Springer, Cham.

F. Hussain, M. Y. Hassan, M. S. Hossen, and S. Choudhury, "An Optimal Resource Allocation Algorithm for D2D Communication Underlaying Cellular Networks" in 14th Annual IEEE Consumer Communications & Networking Conference (CCNC 2017), Las Vegas, USA, Jan. 2017. DOI: 10.1109/CCNC.2017.7983247"

M. Y. Hassan, F. Hussain, M. S. Hossen, S. Choudhury and Muhammad Mahbub Alam, "A Near Optimal Interference Minimization Resource Allocation Algorithm for D2D Communication" in IEEE International Conference on Communications 2017 (ICC 2017), Paris, France, May, 2017. pp. 1-6. DOI: 10.1109/ICC.2017.7997452"

M. Y. Hassan, F. Hussain, M. S. Hossen, S. Choudhury and M M Alam, "nterference Minimization in D2D Communication Underlaying Cellular Networks" IEEE Access, vol. 5, pp.22471-22484, 2017. DOI: 10.1109/ACCESS.2017.2763424

Civil & Environmental Engineering

Ramim, S.S., Sultana, H., Ali, M.A., T, Akter. (2017). Removal of Arsenic from Groundwater Using Iron-Coated Jute-Mesh Structure. Desalination and Water Treatment, 100(December), 347-353.

Chowdhury, M.E., Islam, M.A., Islam, M.S., Shahriar, M.S., Alam, T. (2017) “Design, Operation and Performance Evaluation of a Portable Perforated Steel Tray Rainfall Simulator.” Proceedings of 14th Global Engineering and Technology Conference, Dhaka. [Presented/Best Paper Award]

Ahmed, A.J.M.M.U, Hasan, M.T., Alam, R., Hoque, M.S. (2017) Characteristics of Fundamental Diagrams due to Shockwave by Non-lane based Heterogeneous Traffic, International Structural Engineers's Conference (ISEC-9) doi: 10.14455/ISEC.res.2017.112 https://www.isec-society.org/ISEC_PRESS/ISEC_09/html/O-8.xml

Sobhani, M. G., Saadek, S. N., Rahman, M. N., Islam, A. and Hossain, M. (2017). “Impact of Socio-economic Factors on Parking Demand in Developing Cities”. 12th International Conference of Eastern Asia Society For Transportation Studies (EASTS), Ho Chi Minh City, Vietnam

Sadeek, S. N., Chowdhury, M. T., Rifaat, S. M., Shaheduzzaman, M., Nayem, A. N. (2017) Analysis of Speed Variations at School Zones in Bangladesh. Proceedings of Civil and Water Resources Engineering Conference 3-4 November 2017, BIAM Foundation, 63 Eskaton, Dhaka, Bangladesh ISBN: 978-1-925488-52-4

Rifaat, S. M., Tay, R., Raihan, S. M., Fahim, A. (2017). Vehicle-Pedestrian crashes at Intersections in Dhaka city. The Open Transportation Journal, Vol. 11, pp. 11- 19. (SCOPUS Indexed Journal)

Ali, M.A., Ramim, S.S., Sultana, H., Removal of Arsenic from Groundwater Using Iron-Coated Jute-Mesh Structure, Proceedings of the “Fifth International Conference on Water, Energy & Environment (ICWEE 2017)”, American University of Sharjah, United Arab Emirates, Feb 28-March 2, 2017, pp 233-244. (ISBN978-9948-23-127-1)

TU Mohammed, AH Mahmood, MRI Kamal, SM Yashin, and ZUA Zihan (2017), ‘Effects of maximum size of brick aggregate on properties of concrete’, Construction and Building Materials, 134, pp. 713-726.

TU Mohammed, HK Das, AH Mahmood, MN Rahman, and MA Awal (2017), ‘Flexural performance of RC beams made with recycled brick aggregate’, Construction and Building Materials, 134, pp. 67-74.

Tahseen Z., Ijaj M. Chowdhury, 2017 ‘New Competency Framework for Fresh Engineering Graduates in Bangladesh’, 1st Engineering Conference on Engineering Research and Practice, Global Circle for Scientific, Technological and Management Research (GCSTMR), Dhaka University, Bangladesh. Pp. 60-69.

Monzur Imteaz, Ramesh Karki, Iqbal Hossain, Md. Rezaul Karim (2017). Climate and spatial variabilities of potential rainwater saving and economic benefits for Kathmandu Valley, International Journal of Hydrology Science and Technology, 7(3), pp. 213-227, Inderscience Publications.

Monzur Alam Imteaz, Muhammad Moniruzzaman and Md. Rezaul Karim (2017). Rainwater tank analysis tools, climate and spatial variability: A case study in Sydney, International Journal of Water, 11(3), pp. 251-265, Inderscience Publishers.

Md. Rezaul Karim, Megumi Kuraoka, Takaya Higuchi, Masahiko Sekine and Tsuyoshi Imai (2017). Assessment of Heavy Metal Contamination from Municipal Solid Waste Open Dumping Sites in Bangladesh, Int. J. Environment and Waste Management, 19(3), pp. 191-202. Inderscience Publishers

Arega, Z., Sakib, N., Bhasin, A., & Peterson, J. (2017). "An Investigation into the Continuous High-Temperature Grade and Elastic Recovery of Asphalt Binders Measured Using the Creep-Recovery Test." Journal of Testing and Evaluation, 45(5).

Md. Rezaul Karim and Ataur Rahman (2017). Risks of Climate Change, Operation and Management on Climate Resilient Water Supply Options in the Coastal Areas of Bangladesh, in proceedings of the 1st International Conference on Water and Environmental Engineering, 20-22 Nov 2017, Sydney, Australia, pp. 129-135.

Md. Rezaul Karim and Mohammad Zobair Ibne Bashar (2017). Study of the Reliability and Economic Analysis of Urban Rainwater Harvesting in Six Major Cities of Bangladesh, WSTA 12th Gulf Water Conference to be held from 28-30 March, 2017, Manama, Kingdom of Bahrain.

H. M. Shahin, T. Nakai, Y. Morikawa, S. Masuda and S. Mio (2017): Effective use of geosynthetics to increase bearing capacity of shallow foundations, Canadian Geotechnical Journal, Vol. 54, pp. 1647–1658, doi.org/10.1139/cgj-2016-0505. (Impact Factor: 2.138).

Y. Morikawa, R. Suzuki, S. Masuda, H. M. Shahin and T. Nakai (2017): Reinforcing effects of geosynthetics whose edges are fixed with soil in bearing capacity problems of foundations, Geotechnical Engineering Journal, Vol.12(2), pp. 277-287.

T. Nakai, H. M. Shahin and H. Kyokawa (2017): Significance of tij concept for modeling soft soils, Computational Methods in Tunneling and Subsurface Engineering, Innsbruck, Austria, April.

H. M. Shahin, T. Nakai, M. Kato and K. Okuda (2017): Support mechanism of anchor type retaining wall in braced excavation and analysis of a field observation, Proc. of the 19th International Conference on Soil Mechanics and Geotechnical Engineering (ICSMGE), Seoul, Korea, September.

K.I. Ahmed, M. Absar, H. M. Shahin, S. A. Shafian and S. N. Sadeek (2017): Correlation among the soil parameters of the Karnaphuli river tunnel project, Proc. of the 7th International Conference on Geotechnique, Construction Materials and Environment, Mie, Japan, November, pp. 246-248.

M.A. Rahman, H. M. Shahin and T. Nakai (2017): Stress-strain-dilatancy relationships of normally consolidated Dhaka clay, Proc. of the 7th International Conference on Geotechnique, Construction Materials and Environment, Mie, Japan, November, pp. 351-354.

M.U. Kabir, S.S. Sakib, I. Rahman, M. S. Arefin and H. M. Shahin (2017): Performance of ANN model in predicting the bearing capacity of shallow foundations, Proc. of the 7th International Conference on Geotechnique, Construction Materials and Environment, Mie, Japan, November, pp. 968-971.

T. Nakai, H. M. Shahin (2017): Description of dependency of plastic flow on stress path in constitutive modeling without double hardening rule, Proc. of the 52nd Annual Conference of Japanese Geotechnical Society, Nagoya, Japan, July.

Business and Technology Management

Akter, A., Munira, S., & Amin, K. (2017). Key Influencing Factors for Adopting E-learning Platforms of Private University Students’ in Bangladesh. Journal of Business and Economic Development, 2, 94-98.

Financial Inclusion- A comparative study on South Asia,Business Excellence and Management

Credit rating for small and medium enterprises: problems and prospects in Bangladesh,Journal of Asian Business Strategy

Evaluation of Mutual Funds Performance in Bangladesh: Investors and Market Perspective,Global Journal of Management and Business Research 16(9):1-9

Structural Development & Growth of Non-Bank Financial Institutions with the Contributory Role in the Economy: Evidence from Bangladesh,European Journal of Business and Management

Md.Hafez & Naznin Akther (2017). Determinants of Customer Loyalty in Mobile Telecommunication Industry in Bangladesh. Global Journal of Management and Business Research (A). Publisher Global Journal Inc. (USA). Volume XVII, Issue 1, Version 1, Year 2017 (Page: 141-148). ISSN: 0975-5853

2016 (173)

Mechanical and Production Engineering

Md. Anayet U. Patwari, Mohammad Ahsan Habib , Md. Firoz Mahmud 1, Md. Minhazul Islam , “Investigation of surface parameters during hot air streaming turning process of mild steel” Paper ID 173, ICTE, BSME 2016.

Md. Anayet U. Patwari, Mohammad Ahsan Habib , Md. Tanzib Ehsan Sanglap, Md. Golam Ahnaf, AA Mahmud Hasan, “Investigation Of The Effect Of Vibration Frequency On Surface Roughness During The Milling Process Of Preheated Mild Steel Plate” Paper ID 215, ICTE, BSME 2016.

Md. A. U. Patwari, M. A. Habib, Md. T. Ehsan, Md G. Ahnaf, M. Hasan, “Investigation Of The Effect Of Vibration Frequency On Surface Roughness During The Milling Process Of Preheated Mild Steel Plate”, 7th BSME International Conference on Thermal Engineering, December 2016, Dhaka, Bangladesh.

A. U. Patwari, M. A. Habib, Md. F. Mahmud, and Md. M. Islam, “Investigation of surface parameters during hot air streaming turning process of mild steel”, AIP Conference Proceedings, 1851, 020072, (2017), 7th BSME International Conference on Thermal Engineering, December 2016, Dhaka, Bangladesh.

Md Anayet Ullah Patwari, Suleiman Mohammed Yusuf, Mohammad Ahsan Habib, Shahrair Ragib, Ferdous Azam [2016], “Investigation of Quality of Drilled Holes by Guiding the Drill Bit Using Permanent Magnet on a Glass Fiber Reinforced Polymer Composite Material”, Journal of Applied Mechanics and Materials, Volume 860, p.64-69.

Md Anayet Ullah Patwari, Md K. Bashar, Mohammad Ahsan Habib, Abdul Aziz, Mahfuz Alam [2016], “Development of a Passive Damping Tool Holder for the Improvement of Surace Roughness in Turning Operation of Stainless Steel” Journal of Applied Mechanics and Materials, Volume 860, p.70-p73.

Anayet U. Patwari, Adib Bin Rashid, Md. S.I. Chowdhury, Md. H Rashid, G R Mumtaz, (2016), “Comparison and CFD verification of binder effects in sand mould casting of aluminum alloy”.-Volume 16. Issue 1, page: 143-146, International journal of Engineering, Romania.

Sayedus Salehin, MT Ferdaous, RM Chowdhury, Sumaia S Shithi, MSR Bhuiyan Rofi, Mahir A Mohammed, "Assessment of Renewable Energy Systems combining Techno-Economic Optimization with Energy Scenario Analysis", Energy 112 (2016): 729-741, Pregamon (October 2016) [https://www.sciencedirect.com/science/article/abs/pii/S0360544216308842]

Md Anayet Ullah Patwari, Md Shariful Islam Chowdhury, Mohammad Ahsan Habib, Afzal Hossain Neelav, Md Sharfat Latif, T.M. Moniruzzaman Sunny [2016], “Tool Life Improvement by Externally Applied Ultrasonic Waves in Cutting Process of Dry Turning Operation of Mild Steel”, Journal of Applied Mechanics and Materials, Volume 860, p.58-63.

Mohammad Ahsan Habib, Md. Anayet U. Patwari, “Optimization of surface roughness in drilling of GFRP composite using harmony search algorithm” Proceedings of ICITM 2016, France

Fahim Mahmud Khan, Md Shahriar Islam, Md Zahid Hossain, ‘‘Design Aspects of an Excavator Arm’’, International Review of Mechanical Engineering (IREME), Vol. 10, No. 6, Pp 437-442, September, 2016

Mohammad Ahsan Habib, Md Anayet Ullah Patwari, Ahmad Syed Anwar, Sakib Shadman, Oneeruddho Hussain Abir [2016], “3D CFD Based Optimization Technique for Muffler Design of a Motorcycle”, Journal of Applied Mechanics and Materials, Volume 860, p.52-57.

MM Rahman, JT Hart, AA Bhuiyan, M R Karim, J Naser, Experimental and numerical investigation of coherent structure dynamics on mass transfer in a separated cavity flow, Experimental Thermal and Fluid Science (2016), Vol.76, pp. 146-162. DOI: https://doi.org/10.1016/j.expthermflusci.2016.03.028 (Impact Factor: 3.2, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

JT Hart, M R Karim, AA Bhuiyan, P Witt, J Naser, Numerical modelling of unsteady flow behaviour in the rectangular jets with oblique opening, Alexandria Engineering Journal (2016), Vol. 55 (3), pp. 2309–2320. DOI: https://doi.org/10.1016/j.aej.2016.05.008 (Impact Factor: 6.8, Elsevier, Q1 Ranked, ISI/Scopus Indexed Journal)

Md. Anayet U. Patwari, S.I. Chowdhury, A.H Habib, A H Neelav, S L Sezan, TMM sunny (2016), “Investigation of the Effects of Smart Ultrasound Wave on Surface Roughness during Turning Operation of Mild Steel” Volume: XVI, 765-771, issue 4; Journal of Manufacturing Technology.

Photodegradation Efficiency of Prepared and Commercial ZnO to Remove Textile Dye from Aqueous Solution, Md Jalil Miah, Md. Nazmul Kayes, Md. Obaidullah, Md. Mufazzal Hossain:Journal of Advanced Chemical Sciences 2(3) (2016) 337–340.

Mohammad Ahsan Habib, Ahmad S Anwar, Md. Anayet U. Patwari (2016), “An Innovative Technique to improve muffler performance using automated mechanical iris-Volume 11, Issue 2, ARPN Journal of Engineering and Applied Sciences.

Maharof, M., Jamaludin, Z., and Minhat, M., 2016. Design and Analysis of Cascade P/PI Controller for XY Milling Table Ballscrew Driven System. Proceedings of Innovative Research and Industrial Dialogue (IRID’16), pp. 115-116.

AA Bhuiyan, M R Karim, JT Hart, PJ Witt, J Naser, Investigation of Slot-Burner Aerodynamics with Recessed-Type Nozzle Geometry, Fluids (2016), Vol. 1 (2), p.10. DOI: https://doi.org/10.3390/fluids1020010 (Impact Factor: 1.9, MDPI, Q2 Ranked, ISI/Scopus Indexed Journal)

Mohammad Ahsan Habib, Md. Anayet U. Patwari, Akib Jabed, and M. Nabil Bhuiyan, "Optimization of Surface Roughness in Drilling of GFRP Composite Using Harmony Search Algorithm," International Journal of Mechanical Engineering and Robotics Research, Vol. 5, No. 4, pp. 311-316, October 2016. DOI: 10.18178/ijmerr.5.4.311-316

Md. Mustafizur Rahman, A.K.M. Sadrul Islam, Sayedus Salehin, Md. Abdullah Al-Matin "Development of a Model for Techno-economic Assessment of a Stand-alone Off-grid Solar Photovoltaic System in Bangladesh ", International Journal of Renewable Energy Research, Vol. 6 (1), 2016, pp. 140-149. (March 2016) [https://www.ijrer.org/ijrer/index.php/ijrer/article/view/3254]

M. A. Habib, Md. A. U. Patwari, A. Jabed and M. N. Bhuiyan, “Optimization of surface roughness in drilling of GFRP composite using harmony search algorithm” 5th International Conference on Industrial Technology and Management (ICITM 2016), March 17-18, 2016 in Paris, France.

Fabrication and Characterization of Molecular Films of 11-Oxa[9]helicene and 9-Diethyleneglycoxy-11-oxa[9]helicene, Md Jalil Miah, Mohammad Shahabuddin, Md. Nazmul Kayes, Michinori Karikomi, Eri Nasuno, Norihiro Kato, Ken-ichi Iimura:Trans. Mat. Res. Soc. Japan 41[2]151-154 (2016)

Maharof, M., Ito, T., Jamaludin, Z., Watanabe, T. 2016. Development of local interaction module for ARM-COMS. The Proceedings of Conference of Chugoku-Shikoku Branch, 503, pp. 1-2.

Effect of Inorganic Anions on Photodegradation of Remazol Black B (RBB) in the Aqueous Suspension of ZnO under Solar Light Irradiation Md. Obaidullah, Md. Nazmul Kayes, Md Jalil Miah, Noboru Suzuki, Md. Mufazzal Hossain:Journal of Environmental Science and Pollution Research 2(4) (2016) 145–148.

Md. Amin Mahmud, Md. Shahriar Islam, Md. Zahid Hossain, Mir Md. Maruf Morshed, ‘‘A COMPARATIVE STUDY BETWEEN DIFFERENT HELMHOLTZ RESONATOR SYSTEMS’’ Journal of Canadian Acoustics Vol. 44, No. 4, Pp 12-17, 2016

61. M Monjurul Ehsan, “Shock Wave Decay Phenomenon in Open Atmosphere”, International Research Journal of Engineering and Technology (IRJET), Volume-03, Issue: 06, June-2016, e-ISSN: 2395 -0056, p-ISSN: 2395-0072, Fast Track Publications, India. Impact Factor-7.52.

JT Hart, MR Karim, Arafat A. Bhuiyan, P Witt, J Naser, Numerical modeling of unsteady flow behavior in the rectangular jets with oblique opening. Alexandria Engineering Journal, vol. 55(3): p. 2309-2320, 2016.

Arafat A. Bhuiyan, AKMS Islam, Thermal and hydraulic performance of finned-tube heat exchangers under different flow ranges: A review on modeling and experiment. International Journal of Heat and Mass Transfer, vol. 101: p. 38-59, 2016.

MM Rahman, JT Hart, Arafat A. Bhuiyan, MR Karim, J Naser, Experimental and numerical investigation of coherent structure dynamics on mass transfer in a separated cavity flow. Experimental Thermal and Fluid Science, vol. 76: p. 146-162, 2016.

Arafat A. Bhuiyan, J Naser, Thermal characterization of coal/straw combustion under air/oxy-fuel conditions in a swirl-stabilized furnace: a CFD modeling. Applied Thermal Engineering, vol. 93: p. 639-651, 2016.

Arafat A. Bhuiyan, MH Banna, SF Barna, MR Amin, AKMS Islam, Numerical modeling of thermal characteristics in a microstructure filled porous cavity with mixed convection. International Journal of Heat and Mass Transfer, vol. 93: p. 464-476, 2016.

ASM Ashab, D Ruan, G Lu, Arafat A. Bhuiyan, Finite Element Analysis of Aluminum Honeycombs Subjected to Dynamic Indentation and Compression Loads. Materials, vol. 9(3): p. 162, 2016.

Arafat A. Bhuiyan, MR Karim, JT Hart, P Witt, J Naser, Investigation of Slot-Burner Aerodynamics with Recessed-Type Nozzle Geometry. Fluids, Journal of Multi-Disciplinary Publishing Institute (MDPI), vol. 1(2): p. 10, 2016.

Arafat A. Bhuiyan, J Naser, Modeling of slag deposition and flow characteristics of coal combustion under oxy-firing condition in a 550 MW tangentially fired furnace. Applied Thermal Engineering, vol. 106: p. 221-235, 2016.

Shitab Ishmam, Wasel Rahman, Shabab Bin Karim, Sayedus Salehin, A.K.M. Sadrul Islam, "From Strain to Extraction- A Review to Produce Biodiesel from Microalgae in Bangladesh", In the proceedings of 4th International Conference on the Developments in Renewable Energy Technology, ICDRET 2016, January 07-09, 2016, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/7421484]

Md. Mustafizur Rahman, Sayedus Salehin, A.K.M. Sadrul Islam, "Economic and Environmental Assessments of Solar Home Systems in Bangladesh", In the proceedings of 4th International Conference on the Developments in Renewable Energy Technology, ICDRET 2016, January 07-09, 2016, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/7421473/]

Sayedus Salehin, A.K.M. Sadrul Islam, A.N.M. Zobayer, "Reduction of Cooking Energy and CO2 emission using Heat Retention Cooker for Rice Cooking", In the proceedings of 4th International Conference on the Developments in Renewable Energy Technology, ICDRET 2016, January 07-09, 2016, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/7421488/]

Immobilization of ZnO Suspension on Glass Substrate to Remove Filtration During the Removal of Remazol Red R from Aqueous Solution, Md. Nazmul Kayes, Md Jalil Miah, Md. Obaidullah, M. Akter Hossain, Md. Mufazzal Hossain:JOURNAL OF ADVANCES IN CHEMISTRY, 12(6), 4127–4133, 2016.

M Monjurul Ehsan, Shafi Noor, Sayedus Salehin, A K M Sadrul Islam, “Application of nanofluid in heat exchangers for energy savings”, in M. Masud Khan, Nur Md. Sayeed Hassan eds. ‘Thermofluids Modeling for Energy Efficiency Applications’, Academic Press Inc, Elsevier. (ISBN: 9780128023976). https://www.sciencedirect.com/science/article/pii/B978012802397600004X

M Monjurul Ehsan, Shafi Noor, Sayedus Salehin, A K M Sadrul Islam (2016), “Study of turbulent convective heat transfer enhancement by Al2O3-water nanofluid through a rough circular tube”. Applied Mechanics and Materials, Vol. 819, pp. 341-345, Trans Tech Publications Ltd, Switzerland. (Scopus Indexed Journal). https://www.scientific.net/AMM.819.341

Salehin, S, M Monjurul Ehsan, Noor, S, & Sadrul Islam, A K M (2016). “Modeling of an optimized hybrid energy system for Kutubdia Island, Bangladesh”. In Applied Mechanics and Materials (Vol. 819, pp. 518-522). Trans Tech Publications. (Scopus Indexed Journal). https://www.scientific.net/AMM.819.518

M Salehin, M Monjurul Ehsan, A Mehmood, M Awais, M Usman, “Investigation of TiO2-Water Nanofluid Behavior Through a Wavy Corrugated Pipe in Terms of Heat Transfer and Pumping Power”, International Journal of Mechanical and Production Engineering (IJMPE), ISSN: 2320-2092, Volume- 4, Issue-8, Aug.-2016, IRAJ Publishing house, India. http://www.iraj.in/journal/journal_file/journal_pdf/2-281-147376107335-40.pdf

M Monjurul Ehsan, Shafi Noor, “Investigation of Thermo-Fluid Behaviour of Nanofluid Through a Corrugated Tube”, International Journal of Research in Engineering and Technology (IJRET), Vol-05 Iss-07, Jul-2016, eISSN: 2319-1163 | pISSN: 2321-7308, eSAT Publishing House, India. (Scopus Indexed Journal). https://ijret.org/volumes/2016v05/i07/IJRET20160507063.pdf

M Monjurul Ehsan, Shafi Noor, “Study of Heat Transfer Performance and Pumping Power Improvement of Nanofluid through a Rough Circular Tube”, International Research Journal of Engineering and Technology (IRJET), Volume-03, Issue: 06, June-2016, e-ISSN: 2395 -0056, p-ISSN: 2395-0072, Fast Track Publications, India. (Scopus Indexed Journal). https://www.irjet.net/archives/V3/i6/IRJET-V3I6320.pdf

M Salehin, M Monjurul Ehsan, A Mehmood, M Awais, M Usman, “Investigation of TiO2-Water Nanofluid Behavior Through a Wavy Corrugated Pipe in Terms of Heat Transfer and Pumping Power”, Proceedings of 38th The IRES International Conference, 3rd June 2016, ISBN: 978-93-86083-24-1, Singapore.

Structural and Photoelectrical Characterization of Thin Films of a Novel Amphiphilic Oxa[9]helicene Derivative, Md Jalil Miah, Mohammad Shahabuddin, Michinori Karikomi, Mohammad Salim, Eri Nasuno, Norihiro Kato, and Ken-ichi Iimura: Bull. Chem. Soc. Jpn. 2016, 89, 203–211

Jamaludin, Z., Jamaludin, J., Chiew, T.H., Abdullah, L., Rafan, N.A., Maharof, M. 2016. Sustainable Cutting Process for Milling Operation using Disturbance Observer. Procedia CIRP 40, pp. 486-491.

Electrical and Electronic Engineering

Riazul Arefin, Md Omar Faruque, Rabiul Al Mahmud, and Rakibul Hasan Sagor. "Design of a tunable ring resonator with enhanced quality factor." In 2016 9th International Conference on Electrical and Computer Engineering (ICECE), pp. 369-372. IEEE, 2016.

Arefin R, Faruque MO, Al Mahmud R, Sagor RH. Design of a tunable ring resonator with enhanced quality factor. In2016 9th International Conference on Electrical and Computer Engineering (ICECE) 2016 Dec 20 (pp. 369-372). IEEE.

M. M. Hasan, M. M. Billah, S. Lee, and J. Jang, Tensile Bending Stress on the Performance of Flexible a-IGZO TFT, In Proc. International Workshop on Flexible & Printable Electronics, 2016, Jeonju, Korea.

M. W. Rahman, Q. N. U. Islam, S. M. Abdullah, M. A. Bakth and M. A. Hoque: "Numerical optimization of absorber and buffer layers of CZTS thin film solar cells," 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES), Putrajaya, 2016, pp. 388-392. doi: 10.1109/ICAEES.2016.7888075

M. M. Billah, M. M. Hasan, M. Chun, and J. Jang, TCAD Simulation of Dual Gate a-IGZO TFTs with Source and Drain Offsets. IEEE Electron Device Letters 37 (11), 1442 - 1445, 2016. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

Fahim Abid, Hossein Ghorbani, Amir Masoud Pourrahimi, Hans Edin, "Difference in morphology and polarization properties of heat-treated XLPE and LDPE insulation", IEEE conference on electrical insulation and dielectric phenomenon, Toronto, Canada, Oct 16-19, 2016

Tatiano Busatto, Fahim Abid, Anders Larsson, Math Bollen, Gaurab Sing, "Interaction between grid connected PV systems and LED lamps: direction for further research on harmonics and supraharmonics." 17th IEEE conference on harmonics and quality of power, Belo Horizonte, Brazil, Oct 16-19, 2016

Fahim Abid, Tatiano Busatto, Sarah Ronberg, Math Bollen, "Intermodulation due to interaction of photovoltaic inverter and electrical vehicle at supraharmonic range." 17th IEEE conference on harmonics and quality of power, Belo Horizonte, Brazil, Oct 16-19, 2016.

S. Lee, M. M. Billah, M. Mativenga, and J. Jang, Highly robust a-IGZO TFT for foldable displays, In Proc. The electrochemical Society Symposium Digest Paper, 2016, Hawai, USA.

Y. Choi, S. Lee, M. M. Billah, M. Mativenga, and J. Jang. Double-Gate Modulated Corbino TFTs. IEEE Electron Device Letters 37(9), 1143-1146, 2016. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

M. M. Hasan, M. M. Billah, and J. Jang, Electrical stability of flexible a-IGZO TFT under strained condition, In Proc. International Workshop on Active-Matrix Flat panel Displays and Devices (AM-FPD), 2016, Kyoto, Japan.

Hossain Ghorbani, Markus Saltzer, Fahim Abid and Hans Edin, "Effect of heat-treatment and sample preparation on physical properties of XLPE DC cable insulation material," in IEEE Transactions on Dielectrics and Electrical Insulation, vol. 23, no. 5, pp. 2508-2516, October 2016.

M. M. Billah, M. M. Hasan, M. D. H. Chowdhury, and J. Jang, Excellent Mechanical bending stability of Flexible a-IGZO TFT by dual gate dual sweep using TCAD simulation. In Proc. SID Display Week Symposium Digest of Technical Papers 47(1), 1155, 2016, San Francisco, California, USA.

M. M. Billah, M. D. H. Chowdhury, M. Mativenga, J. K. Um, R. K. Mruthyunjaya, G. N. Heiler, T. J. Tredwell, and J. Jang, Analysis of Improved Performance under Negative Bias Illumination Stress of Dual Gate Driving a-IGZO TFT by TCAD Simulation. IEEE Electron Device Letters 37(6), 735-738, 2016. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

Riyasat Ohib, Samin Yeasar Arnob, Riazul Arefin, Mohammad Muhtady Muhaisin, Tanzil Bin Hassan, MR Amin, Md. Taslim Reza (2016). “ENF Based Grid Classification System: Identifying the Region of Origin of Digital Recordings.” IEEE Signal Processing Cup 2016.

M. W. Rahman, Q. Nafees Ul Islam, S. M. Abdullah, M. A. Bakth and M. A. Hoque, "Numerical optimization of absorber and buffer layers of CZTS thin film solar cells," 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES), Putrajaya, 2016, pp. 388-392, doi: 10.1109/ICAEES.2016.7888075.

Sarowar, G., Hoque, M. A., & Choudhury, M. A. (2016). Simulation of High Efficiency Switched Capacitor AC to DC SEPIC Converter for Improved Power Quality. International Journal of Computer Science and Network Security (IJCSNS), 16(10), 9.

Sobhan, S., Hoque, M. A., Sarowar, G., Ahmad, T., & Farhan, A. M. (2016). Dual Mode-Multiple Output SEPIC Converter Integrated with Passive Ripple Cancelling Circuit for Standalone PV Energy Harvesting System. Journal of Power and Energy Engineering, 4(11), 1.

Shams, A. B., Abied, S. R., & Hoque, M. A. (2016, September). Impact of user mobility on the performance of downlink resource scheduling in Heterogeneous LTE cellular networks. In Electrical Engineering and Information Communication Technology (ICEEICT), 2016 3rd International Conference on (pp. 1-6). IEEE.

Rahman, M. W., Islam, Q. N. U., Abdullah, S. M., Bakth, M. A., & Hoque, M. A. (2016, November). Numerical optimization of absorber and buffer layers of CZTS thin film solar cells. In Advances in Electrical, Electronic and Systems Engineering (ICAEES), International Conference on (pp. 388-392). IEEE.

Rahman, M. W., Ahmed, S. N., Rahman, S. I., & Hoque, M. A. (2016, November). Numerical analysis of CdTe thin film solar cells with CdS: O window layer and ZnO buffer layer. In Advances in Electrical, Electronic and Systems Engineering (ICAEES), International Conference on (pp. 409-413). IEEE.

Ferdous, S. M., Garcia, P., Oninda, M. A. M., & Hoque, M. A. (2016, December). MTPA and Field Weakening Control of Synchronous Reluctance Motor. In Electrical and Computer Engineering (ICECE), 2016 9th International Conference on (pp. 598-601). IEEE.

Rahman, M. W., Rahman, S. I., Ahmed, S. N., & Hoque, M. A. (2016, December). Numerical analysis of CdS: O/CdTe thin film solar cell using Cu 2 Te BSF layer. In Electrical and Computer Engineering (ICECE), 2016 9th International Conference on (pp. 279-282). IEEE.

Ferdous, S. M., Oninda, M. A. M., Sarowar, G., Islam, K. K., & Hoque, M. A. (2016, December). Non-isolated single stage PFC based LED driver with THD minimization using Cúk converter. In Electrical and Computer Engineering (ICECE), 2016 9th International Conference on (pp. 471-474). IEEE.

Technical and Vocational Education

Lawrie, G. A., Schultz, M., Bailey, C. H., Al Mamun, Md. A., Micallef, A. S., Williams, M., & Wright, A. H. (2016). Development of Scaffolded Online Modules to Support Self-Regulated Learning in Chemistry Concepts. In M. Schultz, S. Schmid, & T. Holme (Eds.), ACS Symposium Series (Vol. 1235, Issue 1235, pp. 1–21). American Chemical Society. https://doi.org/10.1021/bk-2016-1235.ch001

Faruque A. Haolader, Khan M. Foysol and Che Kum Clement. TVET in Bangladesh: Systems, Curricula, and Transition Pathways. In: Pilz, Matthias (Ed.) Vocational Education and Training in Times of Economic Crisis: Lessons from Around the World, ISBN 978-3-319-47854-8 under the Series: Maclean, Rupert (Ed.) Technical and Vocational Education and Training: Issues, Concerns and Prospects, ISSN: 1871-3041. Published in December 2016, Springer International Publishing, Germany. https://link.springer.com/chapter/10.1007/978-3-319-47856- 2_11 http://www.springer.com/de/book/9783319478548

F.A. Haolader, S.H. Khan, and C.K. Clement. "Recognising Green Skills in Non-Formal Learning Settings: Current Practices in Bangladesh." Presented at the Symposium on "Recognising Green Skills in Non-Formal Learning Settings. A Comparative Study in Asia", held at UNESCO Institute for Lifelong Learning (UIL) in Hamburg, Germany on 30 to 31 August 2016. https://uil.unesco.org/lifelong-learning/recognition-validation-andaccreditation/ recognizing-green-skills-non-formal

Muzahid, Mohammad AmanUddin, Research topic; Problem and Prospect of Islamic Capital Market in Bangladesh. Center for Research on Islamic Management & Business. Journal of International Journal of Ethics and Social Science, Vol.4, No. 2 June -2016, ISSN : 2308-5096 (P) ISSN 2311-620x (o), pages-10

Yasin, M., Khan, M. S. H. (2016). Possibilities of integrating Video-conferencing in teaching and learning contexts: an initial perspective, Paper presented at the Dhaka international business and social science conference (DIBSSRC), Dhaka, Bangladesh, 20-22 January, 2016.

Al Mamun, M. A., Lawrie, G., & Wright, T. (2016). Student Behavioural Engagement in Self-Paced Online Learning. In S. Barker, S. Dawson, A. Pardo, & C. Colvin (Eds.), Show Me the Learning (pp. 381–386). Australasian Society of Computers in Learning in Tertiary Education (ASCILITE), Adelaide. https://2016conference.ascilite.org/wp-content/uploads/ascilite2016_mamun_concise.pdf

Mamun, M. A., Lawrie, G., Wright, T. (2016). Students' Preference of Visual Media in Self-directed Online Learning. ‘If’: Australian Council for Computers in Education Conference (ACCE), September 2016, Brisbane: Brisbane Convention Centre

Mamun, M. A. (2016). Task completion: key factors in self-paced online learning. The 21st Postgraduate Research Community Conference on ‘Disruptive encounters: A call for messy research’, August 2016, Brisbane: The University of Queensland

Khan, M. S. H., Bibi, S., & Hasan, M. (2016). Australian Technical Teachers' Experience of Technology Integration in Teaching. SAGE Open, 6(3). (SSCI + Scopus Indexed): Impact Factor: 2.032

Muzahid, Mohammad Aman Uddin, Research topic; Youth Development Polices & Area of Co-operations of Muslim Ummah. Published by;- April 2016, International Journal of Ethics and Social science, Dhaka, ISSN : 2308-5096 (P) ISSN 2311-620x (o), Published; 2016, pages-10

Al Mamun, M. A., Lawrie, G., Wright, T. (2016). Factors affecting student engagement in self-directed online learning module. The 21st Century Science and Maths graduate: What is the place of our STEM graduates in the world? How do we prepare them? The 22nd Annual UniServe Science Conference- Proceedings of the Australian Conference on Science and Mathematics Education (ACSME), September 2016, Brisbane: The University of Queensland

Khan, M. S. H., Bibi, S., & Hasan, M. (2016). Australian Technical Teachers' Experience of Technology Integration in Teaching. SAGE Open, 6(3), 215824401666360. doi:10.1177/2158244016663609

Khan, M. S. H., Abdou, B. O., & Clement, C. K. (2016). University student conceptions of MLearning in Bangladesh. In Daniel Churchill, Jie Lu, Thomas Chiu & B. Fox (Eds.), Mobile Learning Design: Theories and Application: Springer (Singapore), P. 127-138

Shamim, R. H., & Raihan, M.A. (2016). Effectiveness of using ICTs to promote teaching and learning in technical education: Case of Bangladesh. International Journal of Vocational and Technical Education, Vol. 8(2), pp. 12-19, February, 2016.

Kayiwa S. J., Raihan, M.A., & Clement, C.K (2016). Role of ICT in Higher Educational Administration in Uganda. World Journal of Educational Research, ISSN 2375-9771 (Print) ISSN 2333-5998 (Online), Published from USA, in the Vol. 3, No. 1, January, 2016.

Raihan, M.A. (November, 2016). Integration of educational technology in TVET classrooms to enhance learning: Context of Bangladesh, International Workshop on Blended Teaching: New Trends in Technical Education in the OIC Member Countries. The workshop organized by the Department of Technical and Vocational Education (TVE), Gazipur, Bangladesh Nov.p.1-18. 21- 24. (International Workshop)

Computer Science and Engineering

Kushol, Rafsanjany, Md Sirajus Salekin, Md. Hasanul Kabir, and Ashraful Alam Khan. 2016. "Copy-Move Forgery Detection Using Color Space and Moment Invariants-Based Features". In International Conference on Digital Image Computing: Techniques And Applications (DICTA), 1-6. Gold Coast: IEEE.

S. A. Sabab and M. H. Ashmafee, "Blind Reader: An intelligent assistant for blind," 2016 19th International Conference on Computer and Information Technology (ICCIT), Dhaka, 2016, pp. 229-234, doi: 10.1109/ICCITECHN.2016.7860200.

A. B. M. A. Rahman, G. Mostaeen, and M. H. Kabir, “A statistical approach for offline signature verification using local gradient features,” in 2nd International Conference on Electrical, Computer & Telecommunication Engineering (ICECTE), 2016, pp.1-4.

Kushol, Rafsanjany, Md Sirajus Salekin, Md Hasanul Kabir, and Ashraful Alam Khan. "Copy-move forgery detection using color space and moment invariants-based features." In 2016 International Conference on Digital Image Computing: Techniques and Applications (DICTA), pp. 1-6. IEEE, 2016.

N. Sakib, Z. Ahmed, A. Farayez, and M. H. Kabir, “An approach to build simplified semi-autonomous Mars Rover,” in IEEE Region 10 Conference (TENCON), 2016, pp. 3502 - 3505.

Md Mamunur Rashid, Kazi Wasif Ahmed, Hasan Mahmud, Md. Kamrul Hasan and Husne Ara Rubaiyeat. Cohesion Based Personalized Community Recommendation System. International Journal of Advanced Computer Science and Applications (IJACSA), 7(8), 2016. http://dx.doi.org/10.14569/IJACSA.2016.070843

Md Mamunur Rashid, Kazi Wasif Ahmed, Hasan Mahmud, Md. Kamrul Hasan and Husne Ara Rubaiyeat, “Cohesion Based Personalized Community Recommendation System”, International Journal of Advanced Computer Science and Applications (IJACSA), 7(8), 2016. http://dx.doi.org/10.14569/IJACSA.2016.070843 [Web of Science, Scopus] [Q3: Computer Science]

Ahnaf Munir, Shihabuzzaman, Md. Sakhawat Hossen, Salimur Choudhury, Muhammad Mahbub Alam., and S. Choudhury “Localized motion planning algorithm for mobile wireless sensor networks”, International Journal of Unconventional Computing (2016), Vol. 12, pp. 363-391.

Munir, A., Uzzaman, S., Hossen, M.S., Choudhury, S., & Alam, M.M. (2016). Localized Motion Planning Algorithm for Mobile Wireless Sensor Networks. Int. J. Unconv. Comput., 12, 363-391.

Munir, A., Hossen, M.S., & Choudhury, S. (2016). Localized Load Balancing in RFID Systems. TPNC.

R. Kushol, M. S. Salekin, M. H. Kabir, and A. A. Khan, “Copy-move forgery detection using color space and moment invariants-based features,” in International Conference on Digital Image Computing: Techniques and Applications (DICTA), 2016, pp. 1-6.

Ahnaf Munir, Md. Sakhawat Hossen and Salimur Choudhury, ”Localized Load Balancing in RFID Systems”, in 5th International Conference on the Theory and Practice of Natural Computing (TPNC) 2016, Sendai, Japan. doi: 10.1007/978-3-319-49001-4 3

S. A. S. Sabab, S. R. H. Digonto, H. M. Mahmud, M. H. Kabir, and M. K. H. Hasan, “EYE POINTER: A Real Time Cost Effective Computer Controlling System Using Eye and Head Movement,” in International Conference on Advances in Computer-Human Interactions (ACHI), 2016, pp. 153–159.

Khan, Ashraful Alam, Mahmudun Nabi, Abdullah-Al-Tariq, and Muhammad Mahbub Alam. 2016. “RIFE-MAC: Fair and Efficient Medium Access Control for IEEE 802.11 Based Wireless Mesh Networks”. IUT Journal of Engineering and Technology (JET) 13 (1): 35–45.

Md Habibur Rahman, Sadia Sharmin, Sheikh Muhammad Sarwar, Mohammad Shoyaib . Software defect prediction using feature space transformation. In Proceedings of the International Conference on Internet of things and Cloud Computing, 2016

Rahman, A. A., Mostaeen, G., & Kabir, M. H. (2016, December). A statistical approach for offline signature verification using local gradient features. In 2016 2nd International Conference on Electrical, Computer & Telecommunication Engineering (ICECTE) (pp. 1-4). IEEE.

M. A. Hossain, C. N. Nguyen, J.-S. Kim, and S. Hwang, “Exploiting resource profiling mechanism for large-scale scientific computing on grids”, Cluster Computing, vol. 19, pp. 1527–1539, 2016, issn: 1386- 7857, (SCIE).

Civil & Environmental Engineering

Ramim, S.S., Sultana, H., Ali, M.A., “Effectiveness of Iron Coated Jute-Mesh Structure to Decrease Arsenic Loading to Rice Fields”, Proceedings of the “1st Bangladesh Civil Engineering Summit, 2016”, Bangladesh University of Engineering & Technology, Dhaka, 23-27 November, 2016, pp EE3-EE10. (ISBN: 978-984-34-1512-7)

TU Mohammed, MN Rahman, AH Mahmood, T Hasan, and SM Apurbo (2016), ‘Utilization of steel slag in concrete as coarse aggregate’, 4th International Conference on Sustainability of Construction Materials and Technologies (SCMT4), 7-11 August 2016, Las Vegas, USA.

TU Mohammed, AH Mahmood, IM Chowdhury, and T Ahmed (2016), ‘Sustainability of construction materials in Bangladesh’, 4th International Conference on Sustainability of Construction Materials and Technologies (SCMT4), 7-11 August 2016, Las Vegas, USA.

Tarek U. Mohammed, Aziz H. Mahmood, Ijaj M. Chowdhury, Akter M. Humayun, Tanvir Ahmed, 2016 ‘Sustainability of Construction Materials in Bangladesh, 4thinternational conference in Sustainable Construction Materials and Technologies (SCMT4), Las Vegas, USA.

Pasha, M., Rifaat, S. M., Tay, R., De Barros, A. (2016). Effects of Street Pattern, Traffic, Road Infrastructure, Socioeconomic and Demographic Characteristics on Public Transit Ridership. Journal of Urban Design, Vol. 21, No. 4, pp. 471–480. (SCOPUS Indexed)

TU Mohammed and AH Mahmood (2016), ‘Effects of maximum aggregate size on UPV of brick aggregate concrete’, Ultrasonics, 69, pp. 129-136.

3. Kabir, M.I.; Bhowmick, A.K., 2016, ‘Effect of geometric imperfection on lateral torsional buckling capacity of I-beams’, Ontario, Canada, presented at 5th International Structural Specialty Conference, Ontario, Canada, 01 June 2016 - 04 June 2016

4. Kabir, M.I.; Bhowmick, A.K., 2016, ‘Analytical Modelling of Welded Wide Flange Section for Lateral Torsional Buckling’, Orlando, Florida, presented at Proceedings of the Annual Stability Conference, Structural Stability Research Council, Orlando, Florida, 12 April 2016 - 15 April 2016

Pasha, M. M., Rifaat, S. M. , Tay, R., DeBarros, A. (2016). Effects of Street Pattern, Traffic, Road Infrastructure, Socioeconomic and Demographic Characteristics on Public Transit Ridership. KSCE Journal of Civil Engineering, Vol. 20(3), pp. 1017- 1022 . (Web of Science and SCOPUS Indexed)

Md. Rezaul Karim, Sadik Rahman, Md. Asif Hossain, Md. Atikul Islam, Shamsul Gafur Mahmud and Zahid Hayat Mahmud (2016). Microbiological effectiveness of mineral pot filters as household water treatment in the coastal areas of Bangladesh, Microbial Risk Analysis, Elsevier, Vol 4, pp.7-15.

Morshed Syed Ahnaf, Rahman Istiakur and Islam Md. Jahidul (2016) “A Numerical Study of Vertical Discontinuity of RCC Frame Structures by Finite Element Analysis “ on 4th Annual International Conference on Architecture and Civil Engineering (ACE 2016), April 25-26, Singapore. DOI: 10.5176/2301-394X_ACE16.90

Ramm, A., Sakib, N., Bhasin, A., & Downer, M. C. (2016). "Optical characterization of temperature- and composition-dependent microstructure in asphalt binders." Journal of Microscopy, 262(3), pp. 216-225.

Williams, S. L., Sakib, N., Kirisits, M. J., & Ferron, R. D. (2016). "Flexural Strength Recovery Induced by Vegetative Bacteria Added to Mortar." ACI Materials, 113(4).

Md. Rezaul Karim, Sadik Rahman, Md. Asif Hossain and Mohammad Shahedur Rahman (2016). Analysis of physico-chemical and microbial quality of urban piped water supplu and associated health burden in two cities in Bangladesh, Journal of Hydrology and Environment Research (JHER), 4(1), pp 25-32, Enviro Water Sydney, Australia.

Md. Rezaul Karim, Md. Ashikur Rahman and Dewan Mahmud Mim (2016). Feasibility of Solar Distillation as the Household Water Supply in Coastal Areas of Bangladesh, Proceedings of World Environmental and Water Resources Congress, ASCE, pp. 30-40

M. M. Shah, M. R. Afzalur, M. I. Monjurul, H. M. Shahin (2016): Effectiveness of jute geotextiles in flexible pavement construction, Int. Journal of Geotechnique, Construction Materials and Environment, Vol.10(1), pp. 1644-1648.

F. Azam, M. S. Islam, H. M. Shahin (2016): Study on tunneling for underground metro rail system in Dhaka city, Int. Journal of Geotechnique, Construction Materials and Environment, Vol.10(2), pp. 1776-1783.

H. M. Shahin, T. Nakai, K. Ishii, T. Iwata, S. Kuroi (2016): Investigation of influence of tunneling on existing building and tunnel based on model tests and numerical simulations, Acta Geotechnica, DOI: 10.1007/s11440-015-0428-2.

T. Nakai, H. M. Hossain, H. Kyokawa (2016): New Description Of Time-Dependent Behavior Of Geomaterials Not Using Ordinary Viscoplatic Theories, The International Symposium on Plasticity 2016, Hawaii, USA, February.

L. H. Kaya, P. S.K. Ooi, T. Nakai, M. T. Adams, J. E. Nicks, H. M. Shahin (2016): Numerical Load Testing of a Geosynthetic Reinforced Soil, Civil Engineering Conference in the Asian Region (CECAR 7), Hawaii, USA, September.

M. W. Zaman, R. Hossain, H. M. Shahin, A. A. Alam (2016): Correlation of Soil Parameters for the Proposed Dhaka - Chittagong Elevated Expressway, Proc. of the 3rd International Conference GEOTECH HANOI on Geotechnics for Sustainable Infrastructure Development, Vietnam, November.

H. M. Shahin (2016): Traffic Congestion in Dhaka: Subway the Ultimate Solution, IEB convention, Dhaka, Bangladesh, February.

T. Z. Asik, M. Rahman, S. I. Matin, H. M. Shahin. (2016): Correlation of Soil Parameters for the Proposed Dhaka - Chittagong Elevated Expressway, Proc. of the 1st Bangladesh Civil Engineering Summit, Dhaka, Bangladesh, vol. 01, pp. GE 40-47.

T. Nakai, H. M. Shahin (2016): Requirements for constitutive models for geomaterials used in the analysis of ground, Proc. of the 51st Annual Conference of Japanese Geotechnical Society, Okayama, Japan, July.

Business and Technology Management

Hossain, M. Y., & Hossain, M. N. (2016). Job satisfaction of private university teachers in Bangledesh. European Business and Management, 8(13), 106-112.

Amin, M. K., Munira, S., Azhar, A., Amin, A., & Karim, M. T. (2016, December). Factors affecting employees' behavioral intention to adopt accounting information system (AIS) in Bangladesh. In 2016 19th International Conference on Computer and Information Technology. IEEE.

Financial Statement and Competitiveness Analysis: A Study on Tourism & Hospitality Industry in Bangladesh,International Journal of Financial Research

2015 (135)

Mechanical and Production Engineering

Md. Anayet U. Patwari, Suleimen Md. Yusuf, Mohammad Ahsan Habib, Shariar ragib, Ferdous, Investigation of Quality of Drilled Holes by Guiding Drill Bit Using Permanent Magnet on a Glass Fiber Reinforced Polymer Composite Material Abstract book of ICMME 2015.

Mohammad Ahsan Habib, Md. Anayet U. Patwari, Ahmad S Anwar (2015), 3D CFD based optimization technique for muffler design of a motorcycle” ICMME 2015, Dhaka, Bangladesh.

Anayet Ullah Patwari, Md. Shariful Islam Chowdhury, Mohammad Ahsan Habib, Afzal Hossain Neelav, Md. Sharfat Latif, T. M. Moniruzzaman Sunny (2015) “Improvement of Tool life by Externally Applied Ultrasonic Waves during Turning Operation of Mild Steel” Accepted to ICMME 2015.

Md. Anayet U. Patwari, Khairul Basar, Mohammad Ahsan Habib, Abdul Aziz, Mahfuz Alam, “Development of a passive damping tool holder for the improvement of surface profile in turning operation of stainess steel” Abstract book of ICMME 2015.

Sayedus Salehin, Md. Mustafizur Rahman, A.K.M. Sadrul Islam "Techno-economic Feasibility Study of a Solar PV-Diesel System for Applications in Northern Part of Bangladesh ", International Journal of Renewable Energy Research , Vol. 5 (4), 2015, pp. 1220-1229 (December 2015) [www.ijrer.org/ijrer/index.php/ijrer/article/viewFile/3022]

M. A. Habib, Md. A. U. Patwari, A. S. Anwar, S. Shadman, O. H. Abir “3D CFD based optimization technique for muffler design of a motorcycle”, 1st International Conference on Materials and Manufacturing Engineering (ICMME 2015), 25-27 December, 2015, Dhaka, Bangladesh.

A. U. Patwari, Md. S.I. Chowdhury, M. A. Habib, A. H. Neelav, S. L. Sezan, T. M. M. Sunny, " Tool life Improvement by Externally Applied Ultrasonic Waves in Cutting Process of Dry Turning Operation of Mild Steel ", 1st International Conference on Materials and Manufacturing Engineering (ICMME 2015), 25-27 December, 2015, Dhaka, Bangladesh.

Md. A. U. Patwari, S. M. Yusuf, M. A. Habib, S. Ragib and F. Azam, “Investigation of Quality of Drilled Holes by Guiding The Drill Bit Using Permanent Magnet on a Glass Fiber Reinforced Polymer Composite Material”, 1st International Conference on Materials and Manufacturing Engineering (ICMME 2015), 25-27 December, 2015, Dhaka, Bangladesh.

Md. A. U Patwari, Md. K. Bashar, M. A. Habib, A. Aziz, M. Alam, “Development of a Passive Damping Tool Holder for The Improvement of Surface Roughness in Turning Operation of Stainless Steel”, 1st International Conference on Materials and Manufacturing Engineering (ICMME 2015), 25-27 December, 2015, Dhaka, Bangladesh.

Najmul Hossain, Md. Shahriar Islam, KH Nazmul Ahsan, Md. Zahid Hossain, Effects on natural frequency of a plate due to distributed and positional concentrated mass, Journal of Vibroengineering (JVE), Vol. 17, issue 7, Nov, 2015

Mohammad Ahsan Habib, Md. Anayet U. Patwari, Ahmad S Anwar (2015), “An Innovative Technique to improve muffler performance using automated mechanical iris submitted to the 2nd International Conference on Mechanical Engineering – ICOME 2015.

M.M. Ehsan, Shafi Noor, Sayedus Salehin, A.K.M. Sadrul Islam, “Application of nanofluid in heat exchangers for energy savings”, in M. Masud Khan, Nur Md. Sayeed Hassan eds. ‘Thermofluids Modeling for Energy Efficiency Applications’, Academic Press Inc, Elsevier. (ISBN: 9780128023976) (September 2015) [https://www.sciencedirect.com/science/article/pii/B978012802397600004X]

M. A. Habib, A. S. Anwar, Md. A. U. Patwari, “An Innovative Concept to Improve the Muffler Performance Using Automated Mechanical IRIS”, 2nd International Conference on Mechanical Engineering – ICOME 2015, September 3-5, 2015, Patra Jasa, Bali – Indonesia

AA Bhuiyan, MR Karim, J Naser, Chapter 11- Modeling of solid and bio-fuel combustion technologies, Thermofluid Modeling for Energy Efficiency Applications (2016) pp. 259-309.

A. U. Patwari, M. A. Habib, Md. S. I. Chowdhury , A. H. Neelav , Md. S. Latif, T. M. M. Sunny, “Improvement of Surface Roughness during Turning of Pre-Heated Mild Steel Using Voice Activated Ultrasonic Waves”, 4th International Conference on Advances in Mechanical Engineering (ICAME 2015), Patra Jasa Bali, Indonesia (26 Aug - 27 Aug, 2015)

Md. Anayet U. Patwari, S.I. Chowdhury, A.H Habib, A H Neelav, S L Sezan, TMM sunny (2015), “Improvement of Surface Roughness during Turning of Pre-Heated Mild Steel Using Voice Activated Ultrasonic Waves”–Abstract book of ICAME 2015,

Md. Anayet U. Patwari, S.I. Chowdhury, A.H Habib, A H Neelav, S L Sezan, TMM sunny (2015), “Improvement of Surface Roughness during Turning of Pre-Heated Mild Steel Using Voice Activated Ultrasonic Waves”–Volume 76 Issue 6, Page 103-104, jurnal Teknologi.

Md. Anayet U. Patwari, Ahsan Habib, S.I Chowdhury, Rana M Hassain Akram; “ Thermal investigation of Vortex Generated Green Coolant on surface texture for Drilling Process”- Elservier procedica; (2015), DOI: 10.1016/j.proeng.2015.05.075.

Md. Amin Mahmud, Md. Shahriar Islam, Md. Zahid Hossain, Mir Md. Maruf Morshed, ‘‘Improvement of Noise Attenuation in a Duct Using Two Helmholtz Resonators’’, International Review of Mechanical Engineering (IREME), Vol. 9, No. 3, Pp 231-236, May, 2015.

Md. Anayet U. Patwari, N.A. Chowdhury, M. D. Arif, S.I Chowdhury (2015), “Effect of different electrode shape on surface roughness of mild steel during EDM” ACTA TECHNICA CORVINIENSIS, Volume 8, Issue-2, Romania.

Md. Shahriar Islam, Md. Zahid Hossain, Mir Md. Maruf Morshed "Dynamic Response of a Simply Supported Plate Due to Excitation at Different Points" International journal of advancements in mechanical and aeronautical engineering, Vol. 2(1), Pp 73-81, 2015.

Francesco Fuso Nerini, Francesco Valentini, Anish Modi, Govinda Upadhyay, Muditha Abeysekera, Sayedus Salehin, Eduardo Appleyard " The Energy and Water Emergency Module; A containerized solution for meeting the energy and water needs in protracted displacement situations." Energy Conversion and Management 93 (2015): 205-214, Elsevier (March 2015) [https://www.sciencedirect.com/science/article/pii/S0196890415000230]

Shishir, S. S., Miah, M. A. K.,Islam, A. S., Hasan, A. T. (2015). Blood Flow Dynamics in Cerebral Aneurysm-A CFD Simulation. Procedia Engineering, 105, 919-927

Fabrication of LB Monolayers of Oxa[9]- Helicene Derivatives and Their Photo- electrochemical Properties, Md Jalil Miah, Mohammad Shahabuddin, Md. Nazmul Kayes, Michinori Karikomi,Eri Nasuno, Norihiro Kato, Ken-ichi Iimura; The 95th CSJ Annual Meeting, 26-29, March, 2015, Nihon University, Chiba, Japan.

Anayet U. Patwari, M. A. Habib, Md. S.I. Chowdhury, R. Md. H. Akram “Thermal Investigation of Vortex Generated Green Coolant on Surface Texture for Drilling Process”, 6th BSME International Conference on Thermal Engineering 2015, Dhaka, Bangladesh.

Mohammad Ahsan Habib, Md. Anayet U. Patwari, Koushik Alam Khan and A. N. M. Amanullah Tomal (2015) “Surface roughness optimization in turning operation using Hybrid algorithm of Artificial Bee Colony with RSM” Advanced Materials Research Vol. 1101 (2015) pp 393© (2015) Trans Tech Publications, Switzerland Accepted: 07.01.2015 doi:10.4028/www.scientific.net/AMR.1101.393.

Arafat A. Bhuiyan, J. Naser, Computational modeling of co-firing of biomass with coal under oxy-fuel condition in a small scale furnace. Fuel, vol. 143: p. 455-466, 2015.

Arafat A. Bhuiyan, J. Naser, Numerical modeling of oxy fuel combustion, the effect of radiative and convective heat transfer and burnout. Fuel, vol. 139: p. 268-284, 2015.

Md. Amin Mahmud , Md. Zahid Hossain, Md. Shahriar Islam, Mir Md. Maruf Morshed ‘‘Noise Attenuation by Two One Degree of Freedom Helmholtz Resonators’’, Proceedings of 10th Global Engineering, Science and Technology Conference 2-3 January, 2015, BIAM Foundation, Dhaka, Bangladesh

Arafat A. Bhuiyan, MR Amin, J Naser, AKMS Islam, Effects of geometric parameters for wavy finned-tube heat exchanger in turbulent flow: a CFD modeling. Frontiers in Heat and Mass Transfer (FHMT), vol. 6(1), 2015.

AA Bhuiyan and J. Naser, “A CFD modelling of radiative performance in co-firing of biomass with Victorian brown coal in industrial furnace”, in 11th International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Australia. 2015.

AA Bhuiyan, “Finite volume modelling (FVM) of straw particles combustion in a 30kW swirl?stabilized furnace under different oxidizing environments”, in International Conference on Mechanical Engineering (ICME), BUET, Bangladesh. 2015.

AA Bhuiyan, “Characterization of emissions measure and thermal performance of coal?water slurry combustion under O2/N2 and O2/CO2 conditions”, in International Conference on Mechanical Engineering (ICME), BUET, Bangladesh, 2015.

AA Bhuiyan and J. Naser, Modeling of slagging in industrial furnace: A comprehensive review”, Procedia Engineering, 105(0): p. 512?519, 2015.

AA Bhuiyan and J. Naser, “Numerical modeling of biomass co–combustion with pulverized coal in a small-scale furnace”, Procedia Engineering, 2015. 105(0): p. 504?511.

AA Bhuiyan, MR Karim, and J. Naser, Modeling of solid and bio-fuel combustion technologies. Thermo-fluid modeling for Energy Efficiency Applications; Khan, MMK, Hassan, NMS, Eds, 2015: p. 259-309.

Arafat A. Bhuiyan, J. Naser, CFD modeling of co-firing of biomass with coal under oxy-fuel combustion in a large scale power plant. Fuel, vol. 159: p. 150-168, 2015.

Shafi Noor, M Monjurul Ehsan, M S Mayeed, A K M Sadrul Islam, “Convective Heat Transfer and Pumping Power for The Flow Through Corrugated Channel Using Nanofluid”, ASME Proceedings of IMECE15, ASME International Mechanical Engineering Congress and Exposition, November 13-19, 2015, Texas, USA.

Rahman, M H, Islam, A K M Sadrul, and Amin, Ruhul M, “Numerical Study of CO and CO2 Emissions from Rural Kitchen in Developing Countries” published in the proceedings of ASME 2015 International Mechanical Engineering Congress & Exposition, November 13-19, 2015, Houston, Texas, USA.

M.A. Karim, M.H. Noor, M. Nasim, S.I. Khan, Assessment of a simplified model of a wave energy converter in terms of hydraulic mechanical and electrical parameters, International Journal of Energy and Power Engineering; 4: 94-102 (2015). doi.org/10.11648/j.ijepe.20150402.20

M. Nasim, M. Brasca, A. Cernicchi, E. Silani, Standards in PPE, A survey, 2015. https://drive.google.com/file/d/1_O3UF7uRL76fnCI9kFVaCzqoyo8dVSCS/view

Maharof, M., Jamaludin, Z., Minhat, M., and Ito, T., 2015. Review on Cutting Force Compensation Techniques for Machine Tools Application. Applied Mechanics and Materials, 761, pp. 250-254.

Electrical and Electronic Engineering

M. M. Billah, M. D. H. Chowdhury, and J. Jang, Comparison of electrical performance for a-IGZO based single gate and dual gate driving TFTs using TCAD, In Proc. 22nd International Display Workshop (IDW), 2015, Otsu, Japan.

Syed Iftekhar Ali, M. S. Islam and Mohammad Rakibul Islam, “A comprehensive review of energy efficient content addressable memory circuits for network applications”, Journal of Circuits Systems and Computers, vol. 25, no. 4, pp. 1630002-1-1630002-40, 2016.

Fahim Abid, ''Effect of Heat-Treatment on Dielectric Properties of Crosslinked Polyethylene'', KTH Royal Institute of Technology, Sweden, M.Sc. Thesis, 2015

M. M. Billah, M. D. H. Chowdhury, and J. Jang, Origin of Negative Transfer Shift under NBIS of a-InGaZnO Thin Film Transistor using TCAD Simulation. In Proc. International meeting on Information Display (IMID), 2015, Daegu, Korea.

X. Li, M. M. Billah, M. Mativenga, D. Geng, Y. H. Kim, T. W. Kim, Y. G. Seol, and J. Jang, M. M. Hasan. Double-Gate Modulated Corbino TFTs. IEEE Electron Device Letters 36(8), 811-813, 2015. [SCIE Q1 indexed, JCR Impact Factor: 4.816].

Syed Iftekhar Ali and Md Shafiqul Islam, “Improved charge-shared match-line sensing scheme for dynamic energy reduction in TCAM”, IETE Journal of Research, vol. 61, no. 4, pp. 341-350, 2015.

Mohammad Rakibul Islam, Rifad Hossain, Md. Ziaul Haque Bhuiyan, Tahmeed Ahmed Margoob, Md. Taslim Reza, Kazi Khairul Islam (2015) “Arrhythmia Detection Technique using basic ECG Parameters.” International Journal of Computer Applications, Volume-119, Issue-10, Page-12-15.

Md. Taslim Reza , Rashid-Al-Mukaddim, Fahim Ahmed Zaman, Nafiul Islam (2015) “Automatic ROI Generation for Lesion Segmentation of Breast Ultrasound Image using Directional Gradient.”, International Journal of Electrical, Electronics and Data Communication, Volume-3, Issue-6, Page-57-60.

Md. Taslim Reza, Rashid-Al-Mukaddim, Fahim Ahmed Zaman, Nafiul Islam (11-13 April, 2015). “Automatic ROI Generation for Lesion Segmentation of Breast Ultrasound Image using Directional Gradient.” Twelfth International Conference on Technological Advances in Electrical, Electronics and Computer Engineering (ICTAEECE), Paris, France.

Sarowar, G., Choudhury, M. A., & Hoque, M. A. (2015). A Novel Control Scheme for Buck-Boost DC to AC Converter for Variable Frequency Applications. Procedia-Social and Behavioral Sciences, 195, 2511-2519.

Sarowar, G., & Hoque, M. A. (2015). High Efficiency Single Phase Switched Capacitor AC to DC Step Down Converter. Procedia-Social and Behavioral Sciences, 195, 2527-2536.

Technical and Vocational Education

Muzahid, Mohammad Aman Uddin, Research topic; Community Based Tourism : A potential Tool for Alleviating poverty in Bangladesh. Published by; International Islamic University Chittagong , December-2015. Journal of Research Journal of Faculty of business Studies (IIUC), ISSN : 2308-5096 (P) ISSN 2311-620x (o), Published; 2015, pages -16

Khan, M. S. H. (2015). Emerging conceptions of ICT-enhanced teaching: Australian TAFE context. Instructional Science, 43(6), 683-708. (SSCI + Scopus Indexed): Impact Factor:2.620

Hasan, M., Khan, M. S. H. & Clement, C. K. (2015). Emerging Trends of Using Open Source Technology for Sustainable Teacher Training Programme in Bangladesh. Procedia - Social and Behavioral Sciences, 195, 862-871. Elsevier

Khan, M. S. H., Bibi, S., & Rahman, M. J (2015). Professional Development of Engineering Education in Bangladesh: Electrical and Electronic Engineering Teachers perceptions. Journal of Electrical Engineering, EE 41, (1 & 2). (IEB Journal)

Muzahid, Mohammad AmanUddin, Informal Islamic Education& Its Role in Human Society, paper present on Education and Development in the ten days workshop, organized by International Islamic University of Malaysia (IIUM), June 06-15, 2005.

Hasan, M., Khan, S. H., & Clement, C. K. (2015, May 28-30). Emerging Trends of Using Open Source Technology for Sustainable Teacher Training Programme in Bangladesh [Paper presentation]. Procedia - Social and Behavioral Sciences, 195, 862--871. doi:10.1016/j.sbspro.2015.06.365

Khan, M. S. H. (2015). Students' conceptions of m-learning Paper presented at the International Mobile Learning Festival 2015: mobile learning, MOOCs and 21st century learning, Hong Kong, 21-23 May, 2015.

Abdou, B. O., Khan, M. S. H., & Clement, C. K. (2015). Students' conceptions of m-learning Proceedings of the International Mobile Learning Festival 2015: mobile learning, MOOCs and 21st century learning, Hong Kong, pp. 498-515.

Hasan, M., Khan, M. S. H. & Clement, C. K. (2015). Emerging Trends of Using Open Source Technology for Sustainable Teacher Training Programme in Bangladesh. Procedia - Social and Behavioral Sciences, 195, 862-871. Elsevier

Khan, M. S. H. (2015). Ausralian TAFE teachers' conceptions of ICT in the workplace, Paper presented at the International conference on TVET for sustainable developement Dhaka, Bangladesh, 30 April-2 May 2015.

Hasan, M. (2015). Teacher Training in the cloud: An innovative approach to Bangladesh TVET [Paper presentation]. International Conference on TVET for Sustainable Development, Institution of Diploma Engineers', Bangladesh, (IDEB)

Mamun, M. A. (2015). Learning science concepts online through simulations: how confident are students in the self-directed environments? The 20th Postgraduate Research Community Conference on Charting educational futures: Building on 20 years of research, August 2015, Brisbane: The University of Queensland

Muzahid, Mohammad Aman Uddin, Research topic; Community Based Tourism : A potential Tool for Alleviating poverty in Bangladesh. Published by; International Islamic University Chittagong , December-2015. Journal of Research Journal of Faculty of business Studies (IIUC), ISSN : 2308-5096 (P) ISSN 2311-620x (o), Published; 2015, pages -16

Asuma, B., Khan, M. S. H., & Clement, C. K. (2015). Constraints encountered by teachers to the implementation of Web-based learning in Uganda. Journal of engineering and technology, 12(2), 21-28. (IUT Journal)

Muzahid, Mohammad Aman Uddin, Research topic; Relationship Between Corporate Social Marketing and Corporate Image. Published by; Center for Research on Islamic Management & Business. International Journal of Ethics and Social science, Vol.3, No. 1 June -2015, ISSN : 2308-5096 (P) ISSN 2311-620x (o), pages -17

Wright, T., Mamun, M. A., Lawrie, G. (2015). Making Concepts Matter: How We Can Help Students Learn. Chemistry, Conceptual Understanding, and Formative Assessment. The 45th World Chemistry Congress (IUPAC-2015), August 2015, Korea: Busan

Al Mamun, M. A., Lawrie, G., Wright, T (2015). Student perceptions in learning science concepts with simulations. The 46th Annual Australasian Science Education Research Association (ASERA) Conference, July 2015, Perth: The University of Western Australia

Tafida, S. K., Clement, C.K., & Raihan, M.A. (2015). Strategies for Retaining Highly Qualified & Experienced Technical Teachers in Teaching Profession in Katsina State, Nigeria. International Journal of Asian Social Science, published by Asian Economic and Social Society (AESS), 5(8): 461-468, ISSN (P): 2226-5139, ISSN (E): 2224-4441.

Tafida, S. K., Clement, C.K., & Raihan, M.A. (2015). Determining the Causes for the Exodus of Technical Teachers from Teaching in Technical and Vocational Institutions to Other Jobs in Katsina State, Nigeria. International Journal of Vocational and Technical Education. Vol. 7(2), pp. 14-19, March, 2015.

Raihan, M.A. (December, 2015). Measuring TVET Quality by Means of Indicators, International Workshop on Technical and Vocational Teachers Education & Training in the OIC Member Countries, organized by TVE Department, IUT. Bangladesh, Dec. 7-10. (International Workshop)

Raihan, M.A. (May, 2015). Entrepreneurship Through TVET for Sustainable Future of Bangladesh. International Conference on TVET for Sustainable Development, 30 April-02 May 2015, Dhaka, Bangladesh. The Conference Jointly Organized by Institution of Diploma Engineers, Bangladesh (IDEB) & Colombo Plan Staff College (CPSC), Manila, p.83. (International Conference)

Tafida, S. K., Clement, C.K., & Raihan, M.A. (2015). Strategies for Retaining Highly Qualified & Experienced Technical Teachers in Teaching Profession in Katsina State, Nigeria. International Journal of Asian Social Science, published by Asian Economic and Social Society (AESS), 5(8): 461-468, ISSN (P): 2226-5139, ISSN (E): 2224-4441.

Tafida, S. K., Clement, C.K., & Raihan, M.A. (2015). Determining the Causes for the Exodus of Technical Teachers from Teaching in Technical and Vocational Institutions to Other Jobs in Katsina State, Nigeria. International Journal of Vocational and Technical Education. Vol. 7(2), pp. 14-19, March, 2015.

Computer Science and Engineering

M. Moniruzzaman, S. Jeeshan Kabeer, and M. Mahbub Alam, “An enhanced local texture pattern for effective face feature description,” Journal of Engineering and Technology, vol. 12, no. 2, pp. 29–38, 2015

Aboubakar Mountapmbeme, Hasan Mahmud and Md. Kamrul Hasan, "Hand Gesture Recognition using Depth Information and DTW", IUT Journal of Engineering and Technology (JET), vol. 12, no. 2, pp. 1-8, December 2015.

M. S. Salekin, R. Kushol, and M. H. Kabir, “An Efficient Circular Block Approach for Copy-Move Forgery Detection,” Journal of Engineering and Technology, vol. 12, no. 2, pp. 9–20, 2015.

BARI, A.S.M. Hossain, Shohel AHMED,AHSAN, Shegufta Bakht, Sadre Ala PARVEZ,AZIZ, Syeda Persia, Md. Tawhidul Islam CHOWDHURY- "ELECTRONIC DEVICE AND METHOD FOR PROVIDING INFORMATION THEREOF” Publication number: 20150220247, Publication Date: Aug 06, 2015

M. H. Kabir, F. Ahmed, and Abdullah-Al-Tariq, “An efficient method for extracting key-frames from 3D human joint locations for action recognition,” in International Conference Image Analysis and Recognition (ICIAR), 2015, pp. 277–284.

Khan, Ashraful Alam, K. Habibul Kabir, and Muhammad Mahbub Alam. 2015. “Connecting the Disconnected: A Combination of DTN, CDN and TCP/IP Approach”. IUT Journal of Engineering and Technology (JET) 12(2): 39–49.

Rahman, Z., & Hasan, M.K. (2015). Better user recommendations using enhancing software development process repository. 2015 18th International Conference on Computer and Information Technology (ICCIT), 70-75.

Md. Abid Hasan, Md. Kamrul Hasan, M. Abdul Mottalib.Linear regression-based feature selection for microarray data classification. International Journal of Data Mining and Bioinformatics (IJDMB), Vol. 11, No. 2, 2015

Sadia Sharmin, Md Rifat Arefin, M Abdullah-Al Wadud, Naushin Nower, Mohammad Shoyaib . SAL: An effective method for software defect prediction. In 2015 18th International Conference on Computer and Information Technology (ICCIT), , 2015

Hossain Md Azam, Hieu Trong Vu, Jik-Soo Kim, Myungho Lee, and Soonwook Hwang. "Scout: a monitor and profiler of grid resources for large-scale scientific computing." In Cloud and Autonomic Computing (ICCAC), 2015 International Conference on, pp. 260-267. IEEE, 2015 (Scopus Indexed)

Civil & Environmental Engineering

Pasha, M. M., Rifaat, S. M., Hasnat, A., Rahman, I. (2015). Pedestrian’s Behavior on Road Crossing Facilities. Journal Technology, Vol. 73(4), pp. 77- 83. (SCOPUS Indexed)

Rifaat, S. M., Pasha, M. M., Shovon, M. H., Nafis, S. R., Limon, M. K. H. (2015). Comparative Speed Study: A Way to Improve Road Safety Condition. Journal of Engineering and Technology, Vol. 12(1), pp. 41- 50. (Peer Reviewed)

Rifaat, S. M., Rahman, M. H., Mohammed, Pasha, M. (2014). Study on the Effect of Road Infrastructure, Socio-Economic and Demographic Features on Road Crashes in Bangladesh". World Academy of Science, Engineering and Technology, International Science Index 88, International Journal of Social, Management, Economics and Business Engineering, 8(4), 1159 – 1164 (Peer Reviewed)

Karim, M. R., Bashar, M. Z. I., Imteaz, M. A. (2015). Reliability and economic analysis of urban rainwater harvesting in a megacity in Bangladesh, Resources, Conservation and Recycling, Volume 104, Part A, Pages 61-67, ISSN 0921-3449

5. Barua, K.; Kabir, M.I., ‘Reduction of Seismic Vulnerability of Building by Base Isolation Technique’, 22nd Annual CEGSS conference, June 8, 2015, Montreal, Quebec, Canada

TU Mohammed, AZ Khan, and AH Mahmood (2015), ‘Recycling of demolished brick aggregate concrete as coarse and fine aggregates’, International Conference on the Regeneration and Conservation of Concrete Structures, Japan Concrete Institute (JCI), vol. 1, 1-3 June 2015, Nagasaki, Japan.

Rifaat, S. M., Labib, M., Mustakim, R., Monwar, M., Tay, R. (2015). Vehicle- Pedestrian Crashes at Intersections in Dhaka City. Proceedings of the Conference of ASEAN Road Safety 2015 (CARS2015), Kuala Lumpur: Malaysian Institute of Road Safety Research. pp. 274- 280.

Pasha Md. Mosabbir, HasnatAbul, Rahman Istiakurand RifaatShakil Mohammad (2015) “Pedestrians behavior on road crossing facilities in Dhaka City”, Jurnal Teknologi, Vol.73(4), pp 77-83, UTM, Johor, Malaysia. DOI: http://dx.doi.org/1.11113/jt.v73.4292

Md. Rezaul Karim, Mohammad Zobair Ibne Bashar and Monzur Alam Imteaz (2015). Reliability and economic analysis of urban rainwater harvesting in a megacity in Bangladesh, Resources, Conservation and Recycling, Elsevier, 104, pp 61-67.

Md. Rezaul Karim, Rifath Ara Rimi and Md. Solaiman Billah (2015). Analysis of storage volume and reliability of the rainwater harvesting tanks in the coastal area of Bangladesh, Desalination and Water Treatment (DWT), Taylor & Francis, 54(13), pp. 3544-3550.

Md. Rezaul Karim, Rifath Ara Rimi and Shamsul Gafur Mahmud (2015). Risk Factors Associated with Coastal Water Supply in Bangladesh, Proceeding of the 2nd IWA Malaysia YWP15 Conference, 17-20 March 2015, Kuala Lumpur, Malaysia.

Y. Isobe, H. M. Shahin, T. Nakai, R. Sakai, Y. Yoshida (2015): Restraint effect of ground displacement by sheet pile - comparison by both model test and numerical analysis, Geotechnical Engineering Journal, vol. 10, no.1, pp. 141-155.

T. Nakai, H. M. Shahin, H. Kyokawa (2015): Simple Modeling of Time-Dependent Behavior for Normally Consolidated Soil to Structured Soil, Proc. of American Rock Mechanics Association, ARMA-2015, Texas, June, 15-716.

T. Nakai, H. M. Shahin, Y. Morikawa, S. Masuda, S. Mio (2015): Effective reinforcing method for increasing bearing capacity with geosynthetics, 15th Asian Reg. Conf. on Soil Mech. and Geotechnical Engineering, Fukuoka, November, pp. 25.

H. M. Shahin, T. Nakai, S. Kuroi (2015): Interaction of tunneling and existing structure considering the location of foundation, 15th Asian Reg. Conf. on Soil Mech. and Geotechnical Engineering, Fukuoka, November, pp. 528.

M. W. Zaman, M. Y. Rumi, M. Salequzzaman, H. M. Shahin (2015): Geotechnical hazard analysis of river embankment of Bangladesh and its protectability, 5th International Conference on Geotechnique, Construction Materials and Environment, Osaka, Japan, November.

Y. Isobe, H. M. Shahin, T. Nakai (2015): Reinforcing in embankment ground subjected to repeated shear deformation, International Conference on Soft Ground Engineering (ICSGE2015), Singapore, December, Advance in Soft Ground Engineering (ICSGE2015), Singapore, December, pp. 517-526.

H. M. Shahin, T. Nakai, K. Okuda, M. Kato (2015): Mechanism of anchor type retaining wall in braced excavation and simulation of a field observation, 1st Int. Con. On Advances in Civil Infrastructures and Construction Materials, Dhaka, Bangladesh, December, pp. 102-111.

M. Emtiaz, A.S.M. Azad, H. M. Shahin (2015): Numerical analysis of a reinforced concrete slab-column connection subjected to lateral & vertical seismic loading, 1st Int. Con. On Advances in Civil Infrastructures and Construction Materials, Dhaka, Bangladesh, December, pp. 609-955.

T. Kinoshita, H. M. Shahin, Y. Isobe and T. Nakai (2015): Experimental Investigation on bearing capacity using geosynthetics and sheet pile, Proc. of the 50th Annual Conference of Japanese Geotechnical Society, Hokkaido, Japan, July, pp. 1647-1648.

Y. Isobe, T. Kinoshita, H. M. Shahin, and T. Nakai (2015): Investigation of the displacement restraint method by steel sheet pile in the ground subjected to shear deformation, Proc. of the 50th Annual Conference of Japanese Geotechnical Society, Hokkaido, Japan, July, pp. 1649-1650.

Business and Technology Management

Hossain, N., & Hossain, Y. (2015). Mobile Banking and customer satisfaction: The case of Dhaka city. World review of business research, 5(3), 108-120.

Working Capital Management and Profitability: A Study on Cement Industry in Bangladesh,Research Journal of Finance and Accounting 6(7)

2014 (104)

Mechanical and Production Engineering

Md. Anayet U. Patwari, Ahsan Habib, S.I Chowdhury, Rana M Hassain Akram; “ Thermal investigation of Vortex Generated Green Coolant on surface texture for Drilling Process” Proceedings of 6th BSME international conference on thermal engineering (CD Version),, 21-23 December 2014, Dhaka, Bangladesh.

Hazim Moria, Sayedus Salehin, Mohammed N. Alghamdi, A.K.M. Sadrul Islam, “Assessment of Wind Characteristics and Electricity Generation Potential for Yanbu, Saudi Arabia”, in the proceeding of19th Australasian Fluid Mechanics Conference (AFMC), December 8-11, 2014,RMIT Univ., Melbourne, Australia, 2014 [http://people.eng.unimelb.edu.au/imarusic/proceedings/19/249.pdf]

Shafi Noor, M. M. Ehsan, Sayedus Salehin, A.K.M. Sadrul Islam, “Heat transfer and pumping power using nanofluid in a corrugated tube”, in the proceeding of 19th Australasian Fluid Mechanics Conference (AFMC), December 8-11, 2014, RMIT Univ., Melbourne, Australia, 2014 [http://people.eng.unimelb.edu.au/imarusic/proceedings/19/522.pdf]

Felix Nickel, Thomas Haas, Eduard Wegner, Daniel Bahro, Sayedus Salehin, Oliver Kraft, Patric A. Gruber, Alexander Colsmann, "Mechanically robust, ITO-free, 4.8% efficient, all-solution processed organic solar cells on flexible PET foil", Solar Energy Materials and Solar Cells 130 (2014): 317-321.Elsevier (November 2014) [https://www.sciencedirect.com/science/article/pii/S0927024814003559]

M. A. Habib, Md. A. U. Patwari, K. A. Khan and A. N. M. A. Tomal, "Surface roughness optimization in turning operation using Hybrid algorithm of Artificial Bee Colony with RSM", 2nd International Conference on Mechatronics, Automation and Manufacturing (ICMAM 2014), Oct. 24-25, 2014, Beijing, China.

Mohammad Ahsan Habib, Md. Anayet U. Patwari, Koushik Alam Khan and A. N. M. Amanullah Tomal (2015) “Surface roughness optimization in turning operation using Hybrid algorithm of Artificial Bee Colony with RSM” Abstract book of ICMAM 2014 , Beijing, China, October 2014

Rashid Ahammed Ferdaus, Mahir Asif Mohammed, Sanzidur Rahman, Sayedus Salehin and Mohammad Abdul Mannan, “Energy Efficient Hybrid Dual Axis Solar Tracking System", Journal of Renewable Energy, Hindawi (July 2014) [https://www.hindawi.com/journals/jre/2014/629717/]

Sayedus Salehin, A.K.M. Sadrul Islam, Rawhatul Hoque, Musfiqur Rahman, Aynul Hoque, Emrul Manna, "Optimized Model of A Solar-Biogas-Diesel Hybrid Energy System for Adorsho Chor island, Bangladesh", in the proceedings of 3rd International Conference on the Developments in Renewable Energy Technology, ICDRET 2014, May 29-31, 2014, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/6861692/]

Ihteaz Muhaimeen Hossain, S.M.Ferdous, Sayedus Salehin, "Pump-as-Turbine (PAT) for Small Scale Power Generation: A Comparative Analysis", in the proceedings of 3rd International Conference on the Developments in Renewable Energy Technology, ICDRET 2014, May 29-31, 2014, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/6861698/]

Taskin Jamal, Weerakorn Ongsakul, Jay Govind Singh, Sayedus Salehin, S.M. Ferdous, "Potential Rooftop Distribution Mapping using Geographic Information Systems (GIS)for Solar PV Installation : A Case Study for Dhaka, Bangladesh", in the proceedings of 3rd International Conference on the Developments in Renewable Energy Technology, ICDRET 2014, May 29-31, 2014, Dhaka, Bangladesh, published by IEEE [https://ieeexplore.ieee.org/abstract/document/6861648/]

Preparation of ZnO with characteristic surface properties for application as an adsorbent, M. Mufazzal Hossain, M. Jalil Miah, M. Nazmul Kayes, M. Akter Hossain, N. M. Bahadur, Journal of Bangladesh Chemical Society, 26(2) 112-125,2014.

Arafat A. Bhuiyan, MR Amin, MR Karim and AKMS Islam, Plate fin and tube heat exchanger modeling: Effects of performance parameters for turbulent flow regime. International Journal of Automotive and Mechanical Engineering, vol. 9(1): p. 1768-1781, 2014.

AA Bhuiyan and J. Naser, Effect of recycled ratio on heat transfer performance of coal combustion in a 0.5MWth combustion test facility”, in 19th Australasian Fluid Mechanics Conference (AFMC), Australia, 2014.

Shafi Noor, M Monjurul Ehsan, M S Mayeed, A K M Sadrul Islam, “Study of convective heat transfer for turbulent flow of nanofluids through corrugated channels”. ASME Proceedings of IMECE14 2014 ASME International Mechanical Engineering Congress and Exposition November 14-20, 2014, Montreal, Canada.

Shafi Noor, M Monjurul Ehsan, Sayedus Salehin, A K M Sadrul Islam, “Heat Transfer and Pumping Power Using Nanofluid in a Corrugated Tube”. 19th Australasian Fluid Mechanics Conference, Heat Transfer, 8-11 December 2014, Melbourne, Australia.

M Monjurul Ehsan, Shafi Noor, Sayedus Salehin, A K M Sadrul Islam, “Study of turbulent convective heat transfer enhancement by Al2O3 -water nanofluid through a rough circular tube”, The 7th International Meeting on Advances in Thermofluids (IMAT), 26-27 November, 2014, Malaysia.

Sayedus Salehin, M Monjurul Ehsan, Shafi Noor, A K M Sadrul Islam, “Modeling of an Optimized Hybrid Energy System for Kutubdia Island, Bangladesh”. The 7th International Meeting on Advances in Thermofluids (IMAT), 26-27 November, 2014, Malaysia.

Rahman, M H, and Islam, A K M Sadrul, “Effects Of The Position of Kitchen Hood Suction On Thermal Comfort And Carbon Dioxide Gas Emission From An Urban Residential Kitchen In Developing Countries” published in the International Meeting on Advances in Thermofluids (IMAT-2014), Kualalampur, Malaysia.

Rahman, M H, Islam, A K M Sadrul, and Amin, Ruhul M, “Effects of Kitchen Hood System on Thermal Comfort and Carbon Dioxide Gas Emission from an Urban Residential Kitchen in Developing Countries” published in the proceedings of International Mechanical Engineering Congress & Exposition, November 14-20, 2014, Montreal, Canada.

AA Bhuiyan, MR Amin, R Karim, A.K.M. S. Islam, Plate fin and tube heat exchanger modeling: Effects of performance parameters for turbulent flow regime, International Journal of Automotive and Mechanical Engineering (2014), Vol. 9 (1), pp. 1768-1781. DOI: http://dx.doi.org/10.15282/ijame.9.2013.25.0147 (Impact Factor: 1.3, Q3 Ranked, ISI/Scopus Indexed Journal)

Rashid, A.R.M.H., Mondol, S.A.S., Shams, M.H., and Anik, A.T.M.F.S. , Design of a Three Wheeler Vehicle's Driver's Seat Considering Ergonomics, Applied Mechanics and Materials, Vol. 564, pp 94-98, 2014

Maharof, M., Jamaludin, Z., Minhat, M., Ito. T., Rafan, N.A., Abdullah, L., Chiew, T.H., Jamaludin, J., and Tang, T.F. 2014, December. Modeling and Techniques of Vibration Control for a 6 Degree-of-Freedom Robot Applications. In 2014 ICPE, The 6 th International Conference on Postgraduate Education 2014 (ICPE-6 2014).

Electrical and Electronic Engineering

M. S. Islam and Syed Iftekhar Ali, “Improved charge shared scheme for low-energy match line sensing in ternary content addressable memory”, in Proc. IEEE International Symposium on Circuits and Systems (ISCAS), pp. 2748 - 2751, June, 2014, Melbourne, Australia.

Technical and Vocational Education

Khan, M. S. H. (2014). A model for integrating ICT into teacher training programs in Bangladesh based on TPCK. International Journal of Education and Development using ICT, 10(3), 21-31 (Australian Research Council indexed journal)

Clement, C. K., & Hasan, M. (2014). Integrating Functional English Language Course in Engineering Curriculum: A Case of Bangladesh. International Journal of English Language and Literature Studies, 3(1), 57-70

Muzahid, Mohammad AmanUddin, Islamization of Knowledge with reference to Business Education, paper present on Islamization of Knowledge in the seminar, organized by International Islamic University Chittagong (IIUC), January 15, 2014.

Wright, T., Lawrie, G., Micallef, A., Bailey, C., Mamun, M. A., Bedford, S., O’Brien, G., Dargaville, T., Schultz, M., Dickson, H., Thompson, C., Tasker, R., Williams, M. (2014). Putting chemical concepts to work- the role of clusters of concepts in conceptual learning and feedback. Conference of Royal Australian Chemical Institute (RACI) National Congress, December 2014, Australia: Adelaide

Alamgir, S. M., Clement, C. K., & Hasan, M. (2014). Relationship between occupational skills provided to Polytechnic Diploma Engineers by BTEB and requirement of industry in Bangladesh. International Journal of Vocational and Technical Education, 6(4), 43-50

Khan, M. S. H. (2014). Phenomenography: a qualitative research methodology in Bangladesh. International Journal on new trends in education and their implication, 5(2), 34-43. (Australian Research Council indexed/approved journal)

Wright, T., Lawrie, G., Mamun, M. A., Bedford, S., O’Brien, G., Dargaville, T., Schultz, M., Dickson, H., Thompson, C., Tasker, R., Williams, M. (2014). Linking Formative Feedback to Online Remedial Interventions in Large Chemistry Classes. 23rd IUPAC International Conference on Chemistry Education (ICCE), July 2014, Canada: Toronto

Islamic Education under British colonial rule in India. (1765 to 1947) An Analysis, International Journal of Ethics and Social science, 2014

Lawrie, G., Micallef, A., Bailey, C., Al Mamun, M. A., Wright, A., Schultz, M., Dargaville, T., Tasker, R., Williams, M., Bedford, S., O'Brien, G., Dickson, H. & Thompson, C. (2014). Laying out a learning smörgåsbord in chemistry: tempting students into finding their own recipe for success. Proceedings of the Australian Conference on Science and Mathematics Education (p.50), Sydney: University of Sydney

Armin, N., Raihan, M.A., & Elbushari, I.E. (2014). Prospect of Tourism Industries in Bangladesh: Context of New Vocationalism. Engineering Research Publications: International Journal of Engineering and Technical Research (IJETR), ISSN: 2321-0869, Vo. 2.

Raihan, M. A. (2014). Synchronous of ICT and Web-based e-Learning for improving the TVET skills in Bangladesh. A Peer Reviewed International Journal of Asian Academic Research Associates (AARJSH) Journal of Social Science & Humanities, ISSN: 2278-859X, Vo.1.

Raihan, M. A. (2014). Collaboration between TVET Institutions and Industries in Bangladesh to Enhance Employability Skills. Engineering Research Publications: International Journal of Engineering and Technical Research (IJETR), ISSN: 2321-0869, Vo. 2, Issue-10.

Raihan, M.A. (December, 2014). Successful Entrepreneur for TVET, International Workshop on Entrepreneurship development through TVET for OIC countries, organized by TVE Department, IUT. Bangladesh, Nov. 9-12; pp.21-34. (International Workshop)

Armin, N., Raihan, M.A., & Elbushari, I.E. (2014). Prospect of Tourism Industries in Bangladesh: Context of New Vocationalism. Engineering Research Publications: International Journal of Engineering and Technical Research (IJETR), ISSN: 2321-0869, Vo. 2, Issue-6.

Raihan, M. A. (2014). Synchronous of ICT & Web-based e-Learning for improving the TVET skills in Bangladesh. A Peer Reviewed International Journal of Asian Academic Research Associates (AARJSH) Journal of Social Science & Humanities, ISSN: 2278-859X, Vo.1, Issue-30.

Wright, T., Mamun, M. A. (2014). Helping Students Explore Chemistry with Simulations. Science Teachers' Association of Queensland (STAQ) Senior Science Conference, November 2014, Brisbane: Queensland University of Technology (QUT)

Computer Science and Engineering

Md. Nafiz Hamid, Md. Abu Naser, Md. Kamrul Hasan, Hasan Mahmud, "A cohesion-based friend-recommendation system", Social Network Analysis and Mining (SNAM), vol. 4, no. 1, pp. 1 27 February 2014, Springer-Verlag GmbH Austria, part of Springer Nature, https://doi.org/10.1007/s13278-014-0176-6

A.F.M. Nazmul Haque Nahin, Jawad Mohammad Alam, Hasan Mahmud, Md. Kamrul Hasan, "Identifying emotion by keystroke dynamics and", Journal of Behaviour and Information Technology (BIT), vol. 33, no. 9, p. 987-996, 3 July 2014. https://doi.org/10.1080/0144929X.2014.907343

Mefta Sadat, Rasam Bin Hossain, Hasan Mahmud, "Recognizing Human Affection: Smartphone Perspective," Global Journal of Computer Science and Technology (GJCST), vol. 14, no. 6, pp. 9-15, 2014. https://computerresearch.org/index.php/computer/article/view/140

A.F.M. Nazmul Haque Nahin, Jawad Mohammad Alam, Hasan Mahmud, Md. Kamrul Hasan, "Identifying emotion by keystroke dynamics and", Journal of Behaviour and Information Technology (BIT), vol. 33, no. 9, p. 987-996, 3 July 2014. https://doi.org/10.1080/0144929X.2014.907343 [SCI/SSCI Web of Science, IF 3.7] [Q1: Human-Computer Interaction in Computer Science, Arts and Humanities, Psychology, Social Sciences]

Akand, M.M., Nayeem, M.T., Sumon, M.R., & Alam, M.M. (2014). A Probabilistic Delay Model for Bidirectional VANETs in City Environments. ArXiv, abs/1411.2931.

M. R. I. Hossain, I. Ahmed, and M. H. Kabir, “Automatic lung tumor detection based on GLCM features,” in Asian Conference on Computer Vision (ACCV) Workshop, 2015, pp. 109–121.

A. R. M. Kamal, C. J. Bleakley, and S. Dobson, “Failure detection in wireless sensor networks: A sequence-based dynamic approach,” ACM Transactions on Sensor Networks (TOSN), vol. 10, no. 2, pp. 1–29, 2014.

F. Bashar, A. Khan, F. Ahmed, and M. H. Kabir, “Robust facial expression recognition based on median ternary pattern (MTP),” in 2013 International Conference on Electrical Information and Communication Technology (EICT), 2014, pp. 1–5.

Md. Nafiz Hamid, Md. Abu Naser, Md. Kamrul Hasan, Hasan Mahmud, "A cohesion-based friend-recommendation system", Social Network Analysis and Mining (SNAM), vol. 4, no. 1, pp. 1 27 February 2014, Springer-Verlag GmbH Austria, part of Springer Nature, https://doi.org/10.1007/s13278-014-0176-6 [ESCI/Web of Science, Scopus] [IF 2.8] [Q1: Communication in Social Science, Human-Computer Interaction, Information Systems]

F. Bashar, A. Khan, F. Ahmed, and M. H. Kabir, “Face recognition using similarity pattern of image directional edge response,” Adv. Electr. Comput. Eng., vol. 14, no. 1, pp. 69–76, 2014. (SCIE)

F. Ahmed, M. H. Kabir, S. Bhuyan, H. Bari, and E. Hossain, “Automated Weed Classification with Local Pattern-Based Texture Descriptors,” Int. Arab J. Inf. Technol., vol. 11, no. 1, pp. 87–94, 2014. (SCIE)

Civil & Environmental Engineering

Tarek U. Mohammed, Ijaj M. Chowdhury, 2014 ‘Sustainable Development of Concrete Construction Materials in Bangladesh’, 1st IUT International Seminar on Sustainability, Recycling, and Durability of Concrete, Islamic University of Technology (IUT), Bangladesh. pp. 24-38.

TU Mohammed and AH Mahmood (2014), ‘Compressive strength of concrete with the variation of moisture condition and type of aggregate’, 1st IUT International Seminar on Sustainability, Recycling, and Durability of Concrete, 8 December 2014, Gazipur, Bangladesh.

Motamed, A., Salomon, D., Sakib, N., & Bhasin, A. (2014). "Emulsified asphalt residue recovery and characterization using Combined Moisture Analyzer Balance (MAB) and Dynamic Shear Rheometer (DSR)." Transportation Research Record: Journal of the Transportation Research Board, Vol. 2444, pp. 88–96.

Md Atikul Islam, Md. Rezaul Karim, Takaya Higuchi, Hiroyuki Sakakibara and Masahiko Sakine (2014). Comparison of the trace metal concentration of drinking water supply options in southwest coastal areas of Bangladesh, Applied Water Science, Springer Open, 4(2), pp. 183-191.

H. M. Shahin, T. Nakai, K. Okuda & M. Kato (2014): Mechanism of Support in Anchor Type Retaining Wall - Model Tests and Numerical Simulations -, Geotechnical Special Publication of American Society of Civil Engineers (ASCE) on Advances in Soil Dynamics and Foundation Engineering, May, vol. 240, pp. 472-481.

T. Nakai, H. M. Shahin, Y. Morikawa, S. Masuda & S. Mio (2014): Effect of reinforcement on bearing capacity of foundations, Geotechnical Special Publication of American Society of Civil Engineers (ASCE) on Advances in Soil Dynamics and Foundation Engineering, May, vol. 240, pp. 482-490.

H. M. Shahin, T. Nakai and S. Kuroi (2014): Effect of repeated shear deformation on twin tunneling – model test and finite element analysis, Proc. of the 8th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground (TC204 ISSMGE, IS-SEOUL, 2014), Korea, August, pp. 67-72.

T. Nakai, H. M. Shahin, K. Okuda and M. Kato (2014): Reinforcing mechanism of anchor type retaining wall – model test and numerical analysis, Proc. of the 8th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground (TC204 ISSMGE, IS-SEOUL, 2014), Korea, August, pp. 73-78.

T. Nakai, H. M. Shahin, M. Hinokio and H. Kyokawa (2014): Why do constitutive models using (p and q) have problems? Geomechanics from Micro to Macro, Cambridge, London, September, pp. 683-688.

H. M. Shahin, T. Nakai, K. Okuda and M. Kato (2014): Support mechanism of anchor type retaining wall and influence of existing structure in braced excavation, Geomechanics from Micro to Macro, Cambridge, London, September, pp. 921-926.

H. M. Shahin, Y. Morikawa, S. Masuda, T. Nakai & S. Mio (2014): Bearing capacity of reinforced sandy ground, Computer Methods and Recent Advances in Geomechanics?(Proc. of the 14th IACMAG), Kyoto, September, pp. 935-940.

T. Nakai, H. M. Shahin, S. Kuroi & T. Iwata (2014): Investigation of the influence of deep tunneling on existing building, Computer Methods and Recent Advances in Geomechanics?(Proc. of the 14th IACMAG), Kyoto, September, pp. 2011-2016.

Y. Isobe, H. M. Shahin & T. Nakai (2014): Effectiveness of reinforcement in embankment ground subjected to repeated shear deformation, Int. Journal of Geotechnique, Construction Materials and Environment, Vol.7(2), pp. 1111-1116.

T. Nakai, H. M. Shahin and H. Kyokawa (2014): Simple Modeling of Time-Dependent Behavior for Structured Soils, Bifurcation and Degradation of Geomaterials in the New Millennium, Springer Series in Geomechanics and Geoengineering, December, doi 10.1007/978-3-319-13506-9_48, pp. 331-338.

M. S. Islam, H. M. Shahin, S. Banik, F. Azam (2014): Elasto-plastic Constitutive Model Parameters and Their Application to Bearing Capacity Estimation for Dhaka Sub-soil, Journal of Civil Engineering (IEB), Vol.42(2), pp. 171-188.

T. Yamaguchi, H.M. Shahin, H. Kyokawa & T. Nakai (2014): Compression and collapse behavior of unsaturated soil under 1D condition and its analysis, , Proc. of the 8th conference of the Japan Society of Material Science Tokai Branch, Nagoya, Japan, March, pp. 59-61.

K. Asano, H.M. Shahin, H. Kyokawa & T. Nakai (2014): Introduction of rotational hardening rule in subloading tij model, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 421-422.

K. Asano, S. Kobayashi, H.M. Shahin and T. Nakai (2014): Influence of the stress history on the stress-dilatancy characteristic and the stiffness of soil, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 425-426.

S. Masuda, R. Suzuki, Y. Morikawa, H.M. Shahin, T. Nakai and S. Mio (2014): Reinforcing effect of geosynthetics on bearing capacity - 2D model tests and numerical simulations, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 561-562.

Y. Morikawa, S. Masuda, R. Suzuki, H. M. Shahin, T. Nakai and S. Mio (2014): Reinforcing effect of geosynthetics on bearing capacity - Centrifuge model tests and 3D numerical simulations, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 563-564.

T. Yamaguchi, S. Kanno, H. M. Shahin, H. Kyokawa, T. Nakai (2014): Investigation of effective stress of unsaturated soil and application of its results to constitutive modeling, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 705-706.

S. Kuroi, D. Takeichi, H. M. Shahin and T. Nakai (2014): Earth pressure of tunnel due to repeated sheer deformation, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 1289-1290.

H. M. Shahin, S. Kuroi, D. Takeichi and T. Nakai (2014): Effect of repeated shear deformation on tunnel earth pressure – model test and numerical analysis, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 1931-1932.

Business and Technology Management

Hossain, M.N., “Customer satisfaction of mobile banks subscriber in Dhaka city – are they satisfy and loyal?” presented and published as Conference proceeding in 11th Asian Business conference.

Hossain, M.N.,“Human Resource Management Practice in Commercial Bank of Bangladesh: A Comparative analysis”; Bangla Vision Research Journal. ISSN: 2079-567X, volume 14, number 1, June 2014.

Talukder, M. F. H., Hossain, M. Y., & Hossain, M. N. (2014). HRM practice in commercial banks: A case study of Bangladesh. IOSR Journal of business and management, 16(2), 29-36.

Naznin Akther (2014). Customers’ Perception of Service Quality: A Study on Some Private Commercial Banks of Bangladesh. The AUST Journal of Science and Technology. Volume-4, Issue-2, and July-2012 (Page: 01-18)

2013 (132)

Mechanical and Production Engineering

M. A. Habib, M. Rahman, "Analysis of Electrolyte Flow in Localized Electrochemical Deposition", 5th BSME International Conference on Thermal Engineering 2013, Dhaka, Bangladesh.

Md. Anayet U. Patwari, S.M Tawfiq ullah (2013), “Measuring the circularity and straightness of a pipe by vision technology” Journal of Engineering, Issue: 4; page: 293-295, 2013

Md. Anayet U. Patwari, Shafi Noor, Md. S.I Chowdhury (2013), “Investigation of Machinability responses during drilling operations with the applications of external magnetic field”- Proceedings of ICMIME conference; RUET; 01-03 November 2013.

Md. Anayet U. Patwari, shafi Noor, Omar Farque Rassel, TMM sunny (2013), “Effect of ultrasonic sound signal on machinability control during turning operations of mild steel” presented in International conference on Control, Robotics and cybernetics”-August 17-18, Male, maldives

Md. Anayet U. Patwari, S M Tawfiq Ullah, Ragib Ishraq Khan, Md. Mahfujur Rahman (2013), “Prediction and Optimization of Surface Roughness by coupled Statistical and Desirability Analysis in Drilling of mild steel” International Journal of Engineering, Issue X (2013), Volume 2.

Md. Anayet U. Patwari, M. N. Mahmood, Shafi Noor, Md. Ziaul Haque Shovon (2013), “Investigation of Machinability responses during magnetic field assisted turning process of preheated mild steel” Elservier procedica; 56 (2013) 713-718.

Md. Anayet U. Patwari, shafi Noor, Omar Farque Rassel, TMM sunny (2013), “Effect of ultrasonic sound signal on machinability control during turning operations of mild steel”- International journal of Electrical Energy, vol:1, issue:2, June 2013, pp113-116, Engineering and Technology publishing, doi: 10.12720/ijoee.1.2.113-116.

Arafat A. Bhuiyan, AKMS Islam, and AI Alam, Development of Web Based Wind Resource Assessment (WEA) Tool. Journal of Energy and Environment, vol. 3(1), 2013.

Arafat A. Bhuiyan, MR Amin and AKMS Islam, Three-dimensional performance analysis of plain fin tube heat exchangers in transitional regime. Applied Thermal Engineering, vol. 50(1): p. 445-454, 2013.

Electrical and Electronic Engineering

Muhammad, Ashik Ahmed, Md. Ashraful Hoque (2013), "Simulated Response of Input Current for high Power Factor and low THD of SEPIC Rectifier" International Journal of Engineering & Computer Science, Vol:13 No:03

Asif Al Noor, Md. Thesun Al-Amin, Rakibul Hasan Sagor and Md. Ghulam Saber, “Guiding Surface Plasmon Polariton Along 90 Degree Bend MDM Waveguide Models,” International Conference on Advances in Electrical Engineering (ICAEE 2013), Dhaka, Bangladesh.

Syed Iftekhar Ali and M. S. Islam, “A match-line dynamic energy reduction technique for high-speed ternary CAM using dual feedback sense amplifier”, Microelectronics Journal, vol. 45, no. 1, pp. 95-101, 2014.

Md. G. Saber, R.H. Sagor, Md. T. Al-Amin and A. Al Noor, “Numerical Investigation of SPP Propagation at the Nano-scale MDM Waveguides with a Combiner”, Photonics Letters of Poland, 2013.

R.H. Sagor, Md. G. Saber, Md. T. Al-Amin and A. Al Noor, “An Optimization Method for Parameter Extraction of Metals using Modified Debye Model”, SpringerPlus, 2013.

Md.G. Saber, R.H. Sagor, Md. T. Al-Amin, A.A. Noor “Investigation of Propagation Properties of Surface Plasmon Polariton Mode in AlGaAs/Ag/AlGaAs Waveguide,” International Conference on Advances in Electrical Engineering (ICAEE 2013), Dhaka, Bangladesh.

Md.G. Saber, R.H. Sagor, A.A. Noor, Md. T. Al-Amin, "Optimization of Debye Parameters for Dielectric Materials and Investigation of Symmetric SPP Mode Propagation Properties in DMD Waveguide," 13th IEEE International Conference on Nanotechnology (2013), Beijing, China.

Md.G. Saber, R.H. Sagor, I.I. Azad, Md. T. Al-Amin, "Optical Properties of Silicon-Germanium Alloy and Cuprous Oxide with Their Application in Plasmonics," Proceedings of 2nd International Conference on Advances in Electronic Devices and Circuits (2013), Kuala Lumpur, Malaysia.

K M Mohibul Kabir, Md. Taslim Reza, Md. Ashraful Hoque (2013) “Analysis and Comparison of Cubic Quantum Dot Nanocrystals of Different Materials.” International Journal of Engineering Trends and Technology (IJETT), Volume-6, Issue-4, Page-198-203.

Naheed Hossain, Md. Taslim Reza, Adnan Quaium, Mohammad Rakibul Islam, Kazi Khairul Islam (2013). “Instrumentation of Tissue Impedance Measurement System and the Detection of Cancer Tissue based on Capacitance Spectra of the Prostate.” International Journal of Scientific & Engineering Research, Volume-4, Issue-12, Page-730-733.

Md. Rifat Rayhan, Faysal, Mohammad, Md. Taslim Reza (2013). “Improvement of a Traffic System using Image and Video Processing.” IOSR Journal of VLSI and Signal Processing (IOSR-JVSP), Volume-2, Issue-3, Page-1-8.

Nafiz Imtiaz Bin Hamid- “Radio Network Planning Guidelines for 4G Technologies - An Overview” - December 2013. ISBN: 978-3-659-47862-8. Available at Amazon.com and Google Books.

Muhammad, Ashik Ahmed, and Md Ashraful Hoque. "Simulated Response of Input Current for high Power Factor and low THD of SEPIC Rectifier." IJECS-IJENS, vol 13, no 3, 2013.

K.M. Mohibul Kabir, Md. Taslim Reza and Md. Ashraful Hoque, “ Analysis and Comparison of Cubic Quantum dot Nanocrystals of Different Materials”, International Journal of Engineering and Technology (IJET), Vol. 6, No. 4 Dec, 2013 pp. 198-201

K.A.S.M Ehetshamul Haque, Tahmid Nahian Bin Quddus, Mohammad Tanvirul Ferdous and Md. Ashraful Hoque, “An Analysis of Efficiency Variation in an AI0.7Ga0.3As/Al0.48In0.52As Heterojunction Soalr Cell with Change in Device Parameters Using Adept 1D Software”, Springer, Electronic Materials Letter, Vol.9 No.1 (2013) pp.47-52.

Sagor, R. H., Hoque, M. A., & Saber, M. G. (2013, October). Performance analysis of gallium lanthanum sulfide and cuprous oxide as nanoplasmonic couplers. In Photonics (ICP), 2013 IEEE 4th International Conference on (pp. 72-74). IEEE.

Technical and Vocational Education

Hasan, M. (2013, December 21-22). Facebook as educational tool: an alternative to LMS in the developing countries [Paper presentation]. 4th International Conference on Education and Information Management (ICEIM-2013), Penang, Malaysia

Khan, M. S. H. (2013). Emerging teachers' conceptions about their current use of ICT in vocational education. Paper presented at Electric Dreams, 30th ascilite conference Sydney, Australia, 1- 4 December, 2013.

Khan, M. S. H. (2013). Emerging approaches to ICT-enhanced teaching: (Australian) technical and vocational education context. Paper presented at the 'Research Students Forum', faculty of education and social work, The University of Sydney, Australia, 31 October 2013. http://sydney.edu.au/education_social_work/doctoral_studies/resources/RSF_s2y13/2013_Sem2_program.pdf

Khan, M. S. H. (2013), Conceptions of, and approaches to, teaching blended context: a review of research. Paper presented at the 36th annual conference of the Higher Education Research and Development Society of Australia, HERDSA 2013, New Zealand, Auckland, 1st - 4th July 2013.

Khan, M. S. H. & Markauskaite, L. (2013). Emerging teachers’ conceptions about their current use of ICT in vocational education. In H. Carter, M. Gosper and J. Hedberg (Eds.), Electric Dreams. Proceedings ascilite 2013 Sydney, Australia pp.476-480

Contribution of Fatimid in Egypt towards Islamic Education, Journal of Islamic University Studies, 2013

Muzahid, Mohammad AmanUddin, Research topic; Qadianism an Academic Analysis,. Published by; Islamic University, Kushtia, Journal of Islamic University Studies, Published; 2013, pages -09

Raihan, M. A., Hasan, M., & Shamim, M. R. H. (2013). Facebook, The New Edutainment Avenue in TVET for Affective Learning. IOSR Journal of Engineering (IOSRJEN), 3(12), 16-28

Khan, M. S. H., & Hasan, M. (2013). Introducing ICT into Teacher-Training Programs: Problems in Bangladesh. Journal of Education and Practice, 4(14), 79-86

Islamic Education During Umayyad Dynasty and Abbaside Period, Published by; Islamic Research center Rajshahi University, 2013

Khan, S. H., & Hasan, M. (2013). Introducing ICT into Teacher-Training Programs: Problems in Bangladesh. Journal of Education and Practice, 4(14), 79-86

Khan, M. S. H. & Markauskaite, L. (2013). Emerging teachers' conceptions about their current use of ICT in vocational education. In H. Carter, M. Gosper and J. Hedberg (Eds.), Electric Dreams. Proceedings ascilite 2013 Sydney, Australia pp.476-480

Raihan, M. A., Hasan, M., & Shamim, M.R.H. (2013). Facebook, The New Edutainment Avenue in TVET for Affective Learning. Journal of Engineering (JEN), a Journal of International Organization of Scientific Research (IOSR-JEN). e-ISSN : 2250-3021, p-ISSN : 2278-8719.

Rahman, M. M., Raihan, M. A., & Khan, M. A.A. (2013). Analysis of the Relevance of 4-Year Diploma-in-Mechanical Engineering Course Curricula with Occupational Tasks of Shipbuilding Industries in Bangladesh. Journal of Engineering (JEN), a Journal of International Organization of Scientific Research (IOSR-JEN). e-ISSN : 2250-3021, p-ISSN : 2278-8719.

Raihan, M. A., & Shamim, M.R.H. (2013). Web-based Collaborative-network & Facebook in TVET to Enhance Teaching-Learning: An Edusocial Perspective, International Journal of Engineering Science & Research Technology (IJESRT), ISSN : 2277-9655; Vol. 2, Issue 11, pp. 3353-3361.

Shamim, M. R. H., & Raihan, M.A. (2013). Eliminating Illiteracy by Integrating ICTs in CLCs: An Innovative Lifelong Learning Approach in Bangladesh. International Journal of Engineering Science & Research Technology (IJESRT), ISSN : 2277-9655.

Usman, I., Celement, C. K., & Raihan, M.A. (2013). A Study of the Problems for Development of Technical and Vocational Education in Katsina State, Nigeria. Journal of Engineering (JEN), a Journal of International Organization of Scientific Research (IOSR-JEN). ISSN : 2278-8719, eISSN : 2250-3021, pp. 38-45.

Rafukka, S. I., Clement, C. K., & Raihan, M.A. (2013). An assessment of the effectiveness of technical teacher training programme in Katsina State, Nigeria; International Journal of Engineering Science & Research Technology (IJESRT), ISSN : 2277-9655.

Rahman, M. M., & Raihan, M.A. (2013). Eradicating Prime Problems of TVET for Ensuring Worth Human Resources in Bangladesh; International Journal of Engineering Science & Research Technology (IJESRT), ISSN : 2277-9655, Vol. 2, Issue 10, pp. 2872-2879.

Ayub, B., Raihan, M.A., & Rahman, M.M. (2013). Improving Performance of Science Subjects in TVET Institutions by Computer Supported Collaborative Learning: Reference to Uganda. International Journal of Engineering Sciences & Research Technology (IJESRT), ISSN: 2277-9655, Vol. 2, Issue 10, pp. 2938-2944.

Raihan, M.A., & Shamim, M.R.H. (2013). Emerging Educational Technologies for TVET to Boost Learning: Issues, Trends, and Horizons; International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), ISSN: 2319-8753, Vol. 2, Issue 7, pp. 3213-3222.

Raihan, M. A., & Shamim, M.R.H. (2013). A Study to Explore the Practice of ICTs in TVET in Bangladesh and South Korea; International Journal of Engineering Science and Innovative Technology (IJESIT), ISSN: 2319-5967, Volume 2, Issue 4, pp. 351-360.

Raihan, M.A., & Seung Lock, H. (2013). Web-based e-Learning Adoptions in TVET by Linking Social Network: the Social-Affective & Cognitive Perspectives. IRACST Engineering Science and Technology: An International Journal (ESTIJ), ISSN: 2250 - 3498 (Online), 2277-5293(Print).

Raihan, M. A., Shamim, M. R. H., Clement, C. K., & Seung Lock, H. (2013). A Study on Assessment & Evaluation of Engineering Students Learning by Essay Test Based on the Cognitive Domain of Bloom's. International Journal of Advances in Engineering & Technology IJAET), ISSN: 2231-1963, Vol. 6, Issue 1, pp. 1-11.

Raihan, M. A., & Seung Lock, H. (2013). Blended-Learning in TVET for Empowering Engineering Students with Technological Innovations: A Case of Bangladesh. International Journal of Educational Science and Research (IJESR); ISSN (Print): 2249-6947; ISSN (Online): 2249-8052, Vol. 3, Issue 1, pp.61-73.

Raihan, M. A., & Seung Lock, H. (2013). Designing Adaptive Web-based e-Learning Environment for Converging-type Learners in Engineering Institutions of Bangladesh. International Journal of Emerging Science and Engineering (IJESE), ISSN: 2319-6378, Impact Factor = 1.0,Vol. 1, Issue 4, pp. 6-10.

Raihan, M. A., & Seung Lock, H. (2013). Situation Analysis of Engineering Institutions for Interactive & Collaborative Web-based e-Learning: Case of Bangladesh. International Journal of Innovative Technology and Exploring Engineering (IJITEE), ISSN: 2278 - 3075 (Online).

Raihan, M. A., & Seung Lock, H. (2013). Integrating Web-based e-Learning in TVET to Enhance the Literacy and Socio-economic Condition for Sustainable Development of Bangladesh. International Institute for Science, Technology & Education (IISTE), Journal of Education and Practice ISSN 2222-1735 (Print), ISSN: 2222-288X (Online).

Raihan, M.A. (November, 2013). Emerging issues, and trends of educational technologies for TVET to enhance learning, International Workshop on Issues, Trends, and Horizons of Technical and Vocational Education and Training (TVET) in OIC Member Countries, organized by TVE Department, IUT. Bangladesh, Nov. 25-28; pp.20-29. (International Workshop)

Raihan, M. A., Hasan, M., & Shamim, M.R.H. (2013). Facebook, The New Edutainment Avenue in TVET for Affective Learning. Journal of Engineering (JEN), a Journal of International Organization of Scientific Research (IOSR-JEN). e-ISSN : 2250-3021, p-ISSN : 2278-8719, Vol. 3, Issue 12 (1) , pp. 16-28.

Raihan, M. A., & Shamim, M.R.H. (2013). Web-based Collaborative-network & Facebook in TVET to Enhance Teaching-Learning: An Edusocial Perspective, International Journal of Engineering Science & Research Technology (IJESRT), ISSN : 2277-9655; Vol. 2, Issue 11, pp. 3353-3361.

Shamim, M. R. H., & Raihan, M.A. (2013). Eliminating Illiteracy by Integrating ICTs in CLCs: An Innovative Lifelong Learning Approach in Bangladesh. International Journal of Engineering Science & Research Technology (IJESRT), ISSN : 2277-9655, Vol. 2, Issue 11, pp. 3362-3367.

Usman, I., Celement, C. K., & Raihan, M.A. (2013). A Study of the Problems for Development of Technical and Vocational Education in Katsina State, Nigeria. Journal of Engineering (JEN), a Journal of International Organization of Scientific Research (IOSR-JEN). ISSN : 2278-8719, eISSN : 2250-3021, IOSR-JEN 2012, pp. 38-45.

Rafukka, S. I., Clement, C. K., & Raihan, M.A. (2013). An assessment of the effectiveness of technical teacher training programme in Katsina State, Nigeria; International Journal of Engineering Science & Research Technology (IJESRT), ISSN : 2277-9655, Vol. 2, Issue 10, pp. 3059-3066.

Rahman, M. M., & Raihan, M.A. (2013). Eradicating Prime Problems of TVET for Ensuring Worth Human Resources in Bangladesh; International Journal of Engineering Science & Research Technology (IJESRT), ISSN : 2277-9655, Vol. 2, Issue 10, pp. 2872-2879.

Ayub, B., Raihan, M.A., & Rahman, M.M. (2013). Improving Performance of Science Subjects in TVET Institutions by Computer Supported Collaborative Learning: Reference to Uganda. International Journal of Engineering Sciences & Research Technology (IJESRT), ISSN: 2277-9655, Vol. 2, Issue 10, pp. 2938-2944.

Raihan, M.A., & Shamim, M.R.H. (2013). Emerging Educational Technologies for TVET to Boost Learning: Issues, Trends, and Horizons; International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), ISSN: 2319-8753, Vol. 2, Issue 7, pp. 3213-3222.

Raihan, M. A., & Shamim, M.R.H. (2013). A Study to Explore the Practice of ICTs in TVET in Bangladesh and South Korea; International Journal of Engineering Science and Innovative Technology (IJESIT), ISSN: 2319-5967, Volume 2, Issue 4, pp. 351-360.

Raihan, M.A., & Seung Lock, H. (2013). Web-based e-Learning Adoptions in TVET by Linking Social Network: the Social-Affective & Cognitive Perspectives. IRACST Engineering Science and Technology: An International Journal (ESTIJ), ISSN: 2250 - 3498(Online), 2277-5293 (Print).

Raihan, M. A., Shamim, M. R. H., Clement, C. K., & Seung Lock, H. (2013). A Study on Assessment & Evaluation of Engineering Students Learning by Essay Test Based on the Cognitive Domain of Bloom's. International Journal of Advances in Engineering & Technology (IJAET), ISSN: 2231-1963, Vol. 6, Issue 1, pp. 1-11.

Raihan, M. A., & Seung Lock, H. (2013). Blended-Learning in TVET for Empowering Engineering Students with Technological Innovations: A Case of Bangladesh. International Journal of Educational Science and Research (IJESR); ISSN (Print): 2249-6947; ISSN (Online): 2249-8052; Vol. 3, Issue 1, pp.61-73.

Raihan, M. A., & Seung Lock, H. (2013). Designing Adaptive Web-based e-Learning Environment for Converging-type Learners in Engineering Institutions of Bangladesh. International Journal of Emerging Science and Engineering (IJESE), ISSN: 2319â€6378, Vol. 1, Issue 4, pp. 6-10.

Raihan, M. A., & Seung Lock, H. (2013). Situation Analysis of Engineering Institutions for Interactive & Collaborative Web-based e-Learning: Case of Bangladesh. International Journal of Innovative Technology and Exploring Engineering (IJITEE), ISSN: 2278 - 3075 (Online), Vo. 2, Issue 3, pp. 48-53.

Raihan, M. A., & Seung Lock, H. (2013). Integrating Web-based e-Learning in TVET to Enhance the Literacy and Socio-economic Condition for Sustainable Development of Bangladesh. International Institute for Science, Technology & Education (IISTE), Journal of Education and Practice ISSN 2222-1735 (Print), ISSN: 2222-288X (Online), Vol.4, (1), pp.1-12.

Computer Science and Engineering

A. R. M. Kamal and M. A. Hamid, “Reliable data approximation in wireless sensor network,” Ad hoc networks, vol. 11, no. 8, pp. 2470–2483, 2013.

Md. Nafiz Hamid, Md. Abu Naser, Md. Kamrul Hasan, Hasan Mahmud. A Cohesion Based Frind Recommendation System. In the Proceedings of 2nd Workshop on Information and Communication Technology,4th October 2013, pp. 1-8, organized by IUT Computer Society, IUT.

A. Khan, F. Bashar, F. Ahmed, and M. H. Kabir, “Median ternary pattern (MTP) for face recognition,” in International Conference on Informatics, Electronics and Vision (ICIEV), 2013, pp. 1–5.

Fayaz Shahdib, Md. Wali Ullah Bhuiyan, Md. Kamrul Hasan, Hasan Mahmud, "Obstacle Detection and Object Size Measurement for Autonomous Mobile Robot using Sensor", International Journal of Computer Applications, vol. 66, no. 9, p. 0975-8887, 2013.

A. R. M. Kamal, C. Bleakley, and S. Dobson, “Packet-level attestation (pla) a framework for in-network sensor data reliability,” ACM Transactions on Sensor Networks (TOSN), vol. 9, no. 2, pp. 1–28, 2013.

Civil & Environmental Engineering

Hossain, M. and Muromachi, Y. (2013) A real-time crash prediction model for the ramp vicinities of urban expressways. IATSS Research, Vol. 37, pp. 68-79.

Hossain, M. and Muromachi, Y. (2013) Understanding crash mechanism on urban expressways using high-resolution traffic data. Accident Analysis and Prevention, Vol. 57, pp. 17-29.

Rahman, M. H., Mohammed, Rifaat, S. M. , Pasha, M (2013). A Study on the effect of road infrastructure, socio-economic and demographic features on road crashes in Bangladesh. Paper published in the Proceedings of 8th CUTSE International Conference on Science, Sustainability and Solutions, 3-4 December, 2013, Curtin University Sarawak, Malaysia, page 87- 96

Pasha, M., Hasanat, A., Rahman, I., Rifaat, S. M. (2013) A Study on Pedestrians’ Behavior of Using Road Crossing Facilities in Dhaka City. Joint conference of The 9th International Conference on Geo-technical & Transportation Engineering (GEOTROPIKA) and The 1st International Conference on Construction and Building Engineering (ICONBUILD), Johor Bahru, Malaysia, 28th – 30th October 2013, Paper ID_181

Wahi, R. R., Rifaat, S. M., Ahsan, N. U., Leema, F. (2013). A Study on the Effect of Licensing System upon Driver’s Attitude in Bangladesh. Brunei Darussalam Journal of Technology and Commerce. Vol. 7(1), pp. 43- 57. (Peer Reviewed)

Hasnat A, Rahman I and Pasha M (2013)“Assessment of Environmental Impact for Tannery Industries in Bangladesh” on International Journal of Environmental Science and Development, Vol. 4, No. 2, April 2013,Maccau.

Md Atikul Islam, Hiroyuki Sakakibara, Md. Rezaul Karim and Masahiko Sakine (2013). Potable Water Scarcity: Options and Issues in the Coastal Areas of Bangladesh, Journal of Water and Health, 11(3), pp 532-542, IWA Publishing.

Md. Rezaul Karim, Saskia Manshoven, Md. Rafizul Islam, Juan Antonio Gascon, Mikel Ibarra, Ludo Diels and Md. Mizanur Rahman (2013). Assessment of an Urban Contaminated Site from Tannery Industries in Dhaka City, Bangladesh, paper accepted for publication in the Journal of Hazardous, Toxic and Radioactive Wastes, ASCE, 17.1, pp. 52-61.

Md. Rezaul Karim, Rifath Ara Rimi and Md. Solaiman Billah (2013). Reliability analysis of household rainwater harvesting tanks in the coastal areas of Bangladesh using daily water balance model, Proceedings of the 20th International Congress on Modeling and Simulation (MODSIM 2013), Adelaide, South Australia 1-6 December, 2013, pp. 2639-2645

Md. Atai Rabbi, Md. Tareq Rahman, Md. Rezaul Karim and Fuad Mohammad Moinul Haque (2013). Water Uses Pattern in Urban Slum, Proceeding of International Conference on Civil, Biology and Environmental Engineering (CBEE-2013), 21-22 November, 2013, Bangkok, Thailand.

T. Konda, J. Nagaya, T. Hashimoto, H. M. Shahin and T. Nakai (2013): In-situ Measurement and Numerical Analysis on Tunnel Lining and Ground Behavior due to Shield Excavation, 3rd International Conference on Computational Methods in Tunnelling and Subsurface Engineering, Germany, April, pp. 191-202.

H. M. Shahin, T. Nakai and S. Kuroi (2013): Tunnel behavior subjected to repeated shear deformation – model test and finite element analysis, 3rd International Conference on Computational Methods in Tunnelling and Subsurface Engineering, Germany, April, pp. 283-292.

T. Nakai, H. M. Shahin, T. Iwata and S. Kuroi (2013): Influence of tunneling on nearby existing building and/or tunnel: model test and finite element analysis, 3rd International Conference on Computational Methods in Tunnelling and Subsurface Engineering, Germany, April, pp. 525-536.

M.S. Islam, Arifuzzaman, H.M. Shahin & S. Nasrin (2013): Effectiveness of vetiver root in embankment slope protection: Bangladesh perspective: Bangladesh perspective, International Journal of Geotechnical Engineering, Vol. 7(2), April, pp. 136-148, DOI: http://dx.doi.org/10.1179/1938636213Z.00000000023.

M.S. Islam & H.M. Shahin (2013): Reinforcing effect of vetiver (Vetiveria zizanioides) root in geotechnical structures - experiments and analyses, Journal of Geomechanics and Engineering, Vol. 5 (4), pp.313-329, DOI: http://dx.doi.org/10.12989/gae.2013.5.3.313.

T. Nakai, H. M. Shahin, M. Hinokio & H. Kyokawa (2013): Significance of tij concept in constitutive modeling of geomatrials, Proc. of the 03rd International Symposium on Computational Geomechanics Krakow, Poland, August, pp. 108-122.

T. Nakai, H. M. Shahin & H. Kyokawa (2013): Rational expression of time-dependent behavior from normally consolidated soil to naturally deposited soil, Proc. of the 18th International Conference on Soil Mechanics and Geotechnical Engineering (ICSMGE), Paris, France, September, pp. 255-258.

H. M. Shahin, T. Nakai & T. Iwata (2013): Rational interpretation of tunneling considering existing tunnel and building loads, Proc. of the 18th International Conference on Soil Mechanics and Geotechnical Engineering (ICSMGE), Paris, France, September, pp. 1773-1776.

H. M. Shahin, T. Nakai, K. Okuda & M. Kato (2013): Investigation of the optimal support patterns in braced excavation using ground anchors, 3rd International Conference on Geotechnique, Construction Materials and Environment, Nagoya, Japan, November, pp. 181-186.

S. Masuda, H. M. Shahin, T. Nakai, Y. Morikawa & S. Mio (2013): Reinforcing effect of geosynthetics on bearing capacity, 3rd International Conference on Geotechnique, Construction Materials and Environment, Nagoya, Japan, November, pp. 199-204.

K. Asano, H. M. Shahin, H. Kyokawa, T. Nakai & R. Ohashi (2013): Influence of the stress history on the stiffness of soil, 3rd International Conference on Geotechnique, Construction Materials and Environment, Nagoya, Japan, November, pp. 205-210.

M.S. Islam, B.A.M. Shariar & H. M. Shahin (2013): Study on growth of vetivar grass in tropical region for slope protection, Int. Journal of Geotechnique, Construction Materials and Environment, Vol.5(2), pp. 729-734.

H. M. Shahin, T. Nakai, Y. Morikawa, S. Masuda, S. Mio & H. Sugiyama (2013): Bearing capacity of reinforced ground considering fixity conditions of geosynthetics, Advance in Foundation Engineering, December, pp. 385-392.

R. Ohashi, K. Asano, H. M. Shahin, T. Nakai & H. Kyokawa (2013): Experimental investigation of the Development of Stress Induced Anisotropy and its Dissipation in Sand, Proc. of the 7th conference of the Japan Society of Material Science Tokai Branch, Nagoya, Japan, March, pp. 71-72.

K. Tsukamoto, T. Yamaguchi, F. Zhang, H. M. Shahin and T. Nakai (2013): Consideration of net stress and effective stress in unsaturated soils based on triaxial tests, Proc. of the 21st Central Japan JSCE conference (CD-ROM), Japan, March, III-4.

R. Ohashi, K. Asano, H. M. Shahin and T. Nakai (2013): Strain stabilization during cyclic loading under drained and undrained tests, Proc. of the 21st Central Japan JSCE conference (CD-ROM), Japan, March, III-20.

S. Kuroi, H. M. Shahin and T. Nakai (2013): Earth pressure at tunnel due to repeated shear deformation, Proc. of the 21st Central Japan JSCE conference (CD-ROM), Japan, March, III-24.

R. Ohashi, K. Asano, H. M. Shahin and T. Nakai and H. Kyokawa (2013): Extension of isotropic hardening constitutive model considering the stabilization of stress-strain behavior under cyclic loading, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 555-556.

K. Asano, R. Ohashi, H. M. Shahin and T. Nakai (2013): Influence of the stress history on the stress-dilatancy characteristic and the stiffness of soil, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 559-560.

S. Masuda, Takeda, Y. Morikawa, H. M. Shahin, T. Nakai and S. Mio (2013): Reinforcing effect of geosynthetics on bearing capacity, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp.693-694.

T. Yamaguchi, K. Tsukamoto, H.M. Shahin, T. Nakai and F. Zhang (2013): Consideration of net stress and effective stress in the modeling of unsaturated soil, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 839-840.

K. Tsukamoto, T. Yamaguchi, H.M. Shahin and T. Nakai (2013): Modeling of the mechanical behavior of unsaturated soils using bonding effect, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 841-842.

K. Okuda?T. Fukuoka?H. M. Shahin and T. Nakai (2013): Investigation of optimum anchor length and embedded length in ground anchors for earth retaining excavation, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 1433-1434.

T. Konda, T. Hashimoto, J. Nagaya, H. M. Shahin and T. Nakai (2013): Numerical Analysis on Tunnel Lining and Ground Behavior due to Shield Excavation, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 1475-1476.

H. M. Shahin, T. Nakai and S. Kuroi (2013): Effect of repeated shear deformation on tunnel earth pressure – model test and numerical analysis, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 1499-1500.

S. Kuroi, H. M. Shahin and T. Nakai (2013): Model tests and numerical simulations of tunnel excavation in deep underground considering existing structure, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 1501-1502.

2012 (157)

Mechanical and Production Engineering

Md. Anayet U. Patwari, M. N. Mahmood, Shafi Noor, Md. Ziaul Haque Shovon, (2012),“Investigation of the Effect of External Permanent Magnetic Field on Cutting temperature and Cutting Force in Turning Operation” International Conference on Mechanical, Industrial and Energy Engineering 2012, 26-27 December, 2012, Khulna, BANGLADESH

Md. Anayet U. Patwari, M. N. Mahmood, Shafi Noor, Md. Ziaul Haque Shovon, S.M Toufiqullah (2012),“Study of the effect of Electromagnetic field on tool wear and surface roughness during turning operation of mild steel” International Conference on Mechanical, Industrial and Energy Engineering 2012, 26-27 December, 2012, Khulna, BANGLADESH

Md. Anayet U. Patwari, Abid Bin Rashid, Ashiqur Rahman (2012),“Prediction of forming defects in deep drawing process by finite element simulation” Submitted in International Conference on Mechanical, Industrial and Energy Engineering 2012, 26-27 December, 2012, Khulna, BANGLADESH

Md. Anayet U. Patwari, M. N. Mahmood, Shafi Noor, Md. Ziaul Haque Shovon (2012), “Investigation of Machinability responses during magnetic field assisted turning process of preheated mild steel” paper ID 155; Proceedings of 5th BSME international conference on thermal engineering, 21-23 December 2012, Dhaka, Bangladesh.

Md. Anayet U. Patwari, S.M Tawfiq ullah, Md. S.I Chowdhury (2012), “Innovating soft computing technique for the prediction of chatter in end milling operations” accepted to mat2012, 22-25 November 2012, Turkey

AKM Nurul Amin, Mohd Dali M Ismail, Muhammad Iqbal Musa; Anayet U Patwari, “Prediction and Investigation of Surface quality in High Speed End-Milling of Silicon to Eliminate Conventional Finishing Operations” Journal of Advanced Materials Research, volume: 418-420 page 1237-1241, transtech publications 2012.

Anayet U. Patwari, Md. H Rashid, G R Mumtaz, M N Mahmood (2012), “Experimental investigations of the effect of gating system in aluminum alloy casting process” Proceedings of 6th International conference on mechanical engineering and 14th annual meet, 28-29 September 2012

Anayet U. Patwari, M N Mahmood, Md. Mahfujur Rahman, Ragib Ishraq Khan (2012), Simulation approach for dynamic characterization of a drill machine” proceedings of 6th International conference on mechanical engineering and 14th annual meet, 28-29 September 2012

Anayet U. Patwari, N. A. Chowdhury, M. D. Arif, and Md. S. I. Chowdhury (2012) “Surface roughness optimization in EDM for circular copper electrode by RSM-GA approach”-Volume 10, issue:03, pp. 299-303, International Journal of Engineering, ISSN 1584-2673.

Md. Anayet U. Patwari, M. D. Arif, M.N. Mahmood, (2012), “ An innovative application of Digital Image Processing to Analyze Tool wear in Turning Operation” Special issue of international journal of the computer, the internet and management, pp 74.1.

Md. Anayet U. Patwari, N.A. Chowdhury, M. D. Arif, S.I Chowdhury (2012), “Prediction of surface roughness during EDM of mild steel using rectangular electrode by RSM” Special issue of international journal of the computer, the internet and management, pp 40.1.

Anayet U Patwari, A.K.M. Nurul Amin (2012), “Artificial Intelligence Model of Surface Roughness for End Milling Operation Of Steel and its verification by Genetic Algorithm” Journal of Applied Mechanics and Materials, vols 110-116, pp 3459-3464.

Md. Anayet U. Patwari, S.M Toufiq Ullah, M. D. Arif, S.I Chowdhury (2012), Development of a simulator for predicting the machinability factor in end milling operations” Special issue of international journal of the computer, the internet and management, pp 24.1.

Anayet U. Patwari, N.M Reehan, M. D. Arif (2012), “Improvement of Machinability of Mild steel during turning operation by Magnetic Cutting”, International Journal of advanced science information technology, volume-2, No-3, pp:9-12.

Md. Anayet U. Patwari, M. D. Arif, SM Tawfiq Ullah (2012), “Controller Design for Behaviour predictor of second order closed loop system in automated industrial processes” volume 5, issue 2, ACTA Publication, Romania.

AKM Nurul Amin, M.H Ishtiyaq, Anayet U Patwari (2012), “Enhancement of Machinability of Inconel 718 in End Milling through Online Induction Heating of Work-piece” Journal of Advanced Materials Research, volume: 415-417 page 420-423, transtech publications.

Md. Anayet U. Patwari, M. D. Arif, Md. S. I. Chowdhury, N. A. Chowdhury (2012), “Identification of Machined surfaces using Digital Image processing” International Journal of Engineering, Issue X (2012), Volume 1, Page: 213-218.

Arafat A. Bhuiyan, AKMS Islam, MR Amin, Numerical study of 3D thermal and hydraulic characteristics of wavy fin-and-tube heat exchanger. Frontiers in Heat and Mass Transfer (FHMT), vol. 3(3), 2012.

AA Bhuiyan, AKMS Islam, Heat Exchanger Design: Plate fin and tube arrangement, LAMBERT Academic Publishing, ISBN-13: 978-3845474601.

M Monjurul Ehsan, R B Hossain, S Salehin, M A Jinnah, “Development of time measuring technique to measure the shock speed during propagation in the open atmosphere”. International Journal of Advanced Science Engineering and Information Technology (IJASEIT), Malaysia. Vol. 2 (2012) No. 3. ISSN: 2088-5334. DOI: http://dx.doi.org/10.18517/ijaseit.2.3.193.230-236. (Scopus Indexed Journal). http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.970.3351&rep=rep1&type=pdf

M A Jinnah, M Monjurul Ehsan. “Numerical and Experimental Study on Wave Propagation in Open Atmosphere”. The Journal of the Institution of Engineers, Malaysia, vol. 73(3), 2012, pages 14-22. ISSN: 0126-513X. (Scopus Indexed Journal). http://103.86.130.60/xmlui/handle/123456789/28659

M Monjurul Ehsan, Enaiyat Ghani Ovy, Kazy Fayeen Shariar, S M Ferdous. “A Novel Approach of Electrification of the High-Rise Buildings at Dhaka City during Load Shedding Hours”. International Journal of Renewable Energy Research (IJRER), Turkey. Vol. 2, no. 1 (2012): 123-130. (Scopus Indexed Journal). https://ijrer.org/ijrer/index.php/ijrer/article/view/140

M Monjurul Ehsan, Enaiyat Ghani Ovy, H A Chowdhury, S M Ferdous. “A Proposal of Implementation of Ducted Wind Turbine Integrated with Solar System for Reliable Power Generation in Bangladesh”. International Journal of Renewable Energy Research (IJRER), Turkey. Vol. 2, no. 3 (2012): 397-403. (Scopus Indexed Journal). https://www.ijrer.org/ijrer/index.php/ijrer/article/viewFile/242/pdf

Ehsan, M. M., R. B. Hossain, S. Salehin, and M. A. Jinnah. "Development of Time Measuring Technique to Measure the Shock Speed during the Propagation in the Free Atmosphere" International Journal on Advanced Science, Engineering and Information Technology 2, no. 3 (2011): 34-38. ISSN: 20885334 (January 2012) [http://www.insightsociety.org/ojaseit/index.php/ijaseit/article/view/193/198]

Rahman, M H, Islam, A K M Sadrul, and Amin, Ruhul M, “Numerical Study of Carbon Dioxide Gas Emission From an Urban Residential Kitchen In Developing Countries” published in the proceedings of ASME 2012 International Mechanical Engineering Congress & Exposition, November 9-15, 2012, Houston, Texas, USA.

Electrical and Electronic Engineering

Syed Iftekhar Ali and M. S. Islam, “A current race-based technique with dual feedback for match-line energy reduction in ternary content addressable memory”, in Proc. IEEE International Conference on Electrical and Computer Engineering (ICECE), pp. 725-728, December, 2012.

Mohammad Rakibul Islam and Syed Iftekhar Ali, “Encoding schemes for memory efficient quasi cyclic low density parity check codes”, WSEAS Transactions on Communications, vol. 11, no. 6, pp. 218-230, June 2012.

Syed Iftekhar Ali and M. S. Islam, “An energy efficient design of high-speed ternary CAM using match-line segmentation and resistive feedback in sense amplifier,” Journal of Computers Special Issue: Selected Papers of the 13th International Conference on Computer and Information Technology (ICCIT 2010), vol. 7, no. 3, pp. 567-577, 2012.

Md Taslim Reza, Rinku Basak Hoque, Md Ashraful (2012). “Effects of Light on the Intraocular Pressure of Aqueous Humor.” American Academic & Scholarly Research Journal, Volume-4, Issue-4.

Md. Taslim Reza, S.M.Ferdous, Md. Nayeemul Hasan, Md. Rokonuzzaman, Kazi Firoz Ahmed, A.Z.M.Shahriar Muttalib (2012). “A Low Cost surface Electromyogram (sEMG) signal controlled Differential Drive based Automated Wheel Chair for Disabled.” International Journal of Scientific and Engineering Research, Volume-3, Issue-2, Page-46-51.

Nafiz Imtiaz Bin Hamid, Mohammad T. Kawser and Md. Ashraful Hoque, “Coverage and Capacity Analysis of LTE Radio Network Planning Considering Dhaka City”, International Journal of Computer Applications (0975-887), Vol. 46, No.15, May 2012, pp. 49-56.

Nafiz Imtiaz Bin Hamid, Md. Ashraful Hoque and Kazi Khairul Islam, “Nominal and Detailed LTE Radio Network Planning Considering Future Development in Dhaka City”, International Journal of Computer Applications (0975-887), Vol. 50, No.17, July 2012, pp. 49-56.

Md. Taslim Reza, Rinku Basak and Md. Ashraful Hoque, “Effects of Light on the Intraocular Aqueous Humor”, American Academic & Scholarly Research Journal, Vo. 4, No. 4, July 2012.

Md. Rezaul Hasan, Md. Ashraful Hoque and Ashik Ahmed, “A Comprehensive Model of SRM in MATLAB Environment”, International Journal of Engineering and Computer Science IJECS-IJENS , Vol. 12, No.04, August 2012, pp. 89-96.

Muhammad, M. I. E. E. E., and Md Ashraful Hoque. "On Analysis of Front End Current of Rectifier Converter for low THD and high PF with SEPIC." International Journal of Computer Applications 975 (2012): 8887.

Muhammad, Islam, M.S., & Hoque, M.A. (2012), "TOTAL HARMONIC DISTORTION ANALYSIS OF FRONT END CURRENT FOR DIODE RECTIFIER WITH SEPIC PFC" International Journal of System Simulation. Vol:06 No:01

Mohammad T. Kawser, Nafiz I. B. Hamid, Md. Nayeemul Hasan, M. Shah Alam, and M. Musfiqur Rahman, “Downlink SNR to CQI Mapping for Different Multiple Antenna Techniques in LTE”, International Journal of Information and Electronics Engineering, vol. 2, no. 5, pp. 756-760, ISSN: 2010-3719, 2012.

Mohammad T. Kawser, Nafiz I. B. Hamid, Md. Nayeemul Hasan, M. Shah Alam, and M. Musfiqur Rahman, “Limiting HARQ Retransmissions in Downlink for Poor Radio Link in LTE”, International Journal of Information and Electronics Engineering, vol. 2, no. 5, pp. 707-709, ISSN: 2010-3719, 2012.

Technical and Vocational Education

Hasan, M., Mamun, A. A. (2012). Teaching Evaluation by the Students of Engineering Education: A Case for the International University of Bangladesh. Asian Journal of Management Sciences and Education, 1(2), 91-102

Mamun, M. A. A., Hasan, M., & Amin, M. R. (2012). Investigating the Causes of Students' Dropout from the Diploma Engineering Programs in the Polytechnic Institutes of Bangladesh. Academic Research International, 3(2), 231-238.

K. Usama and F. A. Haolader. ICT Competence: Assessment of Competence of TVET Trainee Teachers in the Field of ICT. LAP LAMBERT Academic Publishing, October 1, 2012, Language: English, ISBN-10: 3659256986, ISBN-13: 978-3659256981.

Khan, M., Hossain, S., Hasan, M., & Clement, C. K. (2012). Barriers to the Introduction of ICT into Education in Developing Countries: The Example of Bangladesh. International Journal of Instruction, 5(2), 61-80

Hasan, M., Mamun, M. A. A., & Muhammad, K. (2012). A Comparative Study of General Subjects Taught in Diploma Engineering Education in SAARC Countries. International Journal of Basic & Applied Sciences (IJBAS-IJENS), 12(5), 127-135

Hasan, M., Khan, S. H., & Foysol, K. M. (2012). Need of Introducing English Proficiency Course into Engineering Education in Bangladesh: A Case Study. International Journal of Asian Social Science, 2(8), 1261-1268

Foysol, K. M., Hasan, M., & Mamun, M. A. A. (2012). Impact of Introducing Vocational Education in Model Schools and Colleges of Bangladesh: Present Status and Future Prospects. International Journal of Basic and Applied Science (IJBAS-IJENS), 12(5), 62-68

Khan, M. S. H., Hasan, M., & Clement, C. K. (2012). Barriers to the introduction of ICT into education in developing countries: the example of Bangladesh International Journal of Instruction, 5(2), 61-80. (Emerging SCI, and Scopus indexed)

Al Mamun, M. A. (2012). The soft skills education for the vocational graduate: Value as work readiness skills. Journal of Education, Society and Behavioural Science, 2(4), 326–338. https://doi.org/10.9734/BJESBS/2012/1858

Jinnah, M. A., Mamun, M. A. A., Khan, M. S. H., & Hasan, M. (2011). ICT in vocational teaching/learning and research in Southeast Asian Countries: A case of Bangladesh. International Journal of Vocational and Technical Education, 3(6), 75-80

Habibu, T., Al Mamun, A., & Clement, C. K. (2012). Difficulties faced by teachers in using ICT in teaching-learning at technical and higher educational institutions of Uganda. International Journal of Engineering Research & Technology, 1(7), 1–10.

Asad, S., Al Mamun, M. A., & Clement, C. K. (2012). The effect of social networking sites to the lifestyles of teachers and students in higher educational institutions. International Journal of Basic and Applied Sciences, 1(4), 498–510. https://doi.org/10.14419/ijbas.v1i4.374

Muzahid, Mohammad Aman Uddin, Research topic; Status of Women in Different Religion. Published by; Islamic University, Kushtia , Journal of Islamic University Studies, Part – A, volume-16, No-2, December: 2012, pages -11

Al Mamun, M. A., Hasan, M., & Amin, Ruhul. (2012). Investigating the causes of students’ dropout from the diploma engineering programs in the polytechnic institutes of Bangladesh. Academic Research International, 3(2).

Shamim, M. R. H. Ahmed, S., & Raihan, M.A. (2012). A comparative study on first shift Diploma in engineering result with second shift in Polytechnic institutes of Bangladesh. International Journals of Engineering & Science (IJENS), International Journal of Engineering & Technology (IJET), ISSN: 2077-1185 (online), ISSN: 2227-2712 (Print), Pakistan, Vol. 12, Issue 06, pp. 100-108.

Raihan, M. A., & Seung Lock, H. (2012). Technology Integration for Meaningful Learning - the Constructivist View. Bangladesh Forum for Educational Development (BAFED), Bangladesh Education Journal, A half-yearly publication of UNESCO-BAFED research forum. ISSN: 18110762, Vol. 11, (1), pp. 17-37. Retrieved from: http://www.bafed.net/ejournals.php

Raihan, M. A., & Seung Lock, H. (2012). Designing interactive and collaborative e-Learning environments for TVET. Journal of Educational Research, Published by Educational Research Institute Kongju National University, Gong-Ju, Korea. ISSN: 1738-2246, Vol. 26 (2), pp. 177-201.

Raihan, M.A. (December, 2012). John Dewey Experience and Education Workshop on Educational Technology and System Design, Moju, South Korea, Dec. 26-29, pp. 126-138. (International Workshop)

Shamim, M. R. H. Ahmed, S., & Raihan, M.A. (2012). A comparative study on first shift Diploma in engineering result with second shift in Polytechnic institutes of Bangladesh. International Journals of Engineering & Science (IJENS), International Journal of Engineering & Technology (IJET), ISSN: 2077-1185 (online), ISSN: 2227-2712 (Print), Pakistan, Vol. 12, Issue 06, pp. 100-108.

Raihan, M. A., & Seung Lock, H. (2012). Technology Integration for Meaningful Learning - the Constructivist View. Bangladesh Forum for Educational Development (BAFED), Bangladesh Education Journal, A half-yearly publication of UNESCO-BAFED research forum. ISSN: 18110762, Vol. 11, (1), pp. 17-37.

Raihan, M. A., & Seung Lock, H. (2012). Designing interactive and collaborative e-Learning environments for TVET. Journal of Educational Research, Published by Educational Research Institute Kongju National University, Gong-Ju, Korea. ISSN: 1738-2246, Vol. 26 (2), pp. 177-201.

Al Mamun, M. A. (2012). Technology in educational settings in the government polytechnic institutes of Bangladesh: A critical analysis. International Journal of Computer Applications, 54(13), 32–40. https://doi.org/10.5120/8628-2502

Computer Science and Engineering

Abu Raihan M. Kamal, Chris J. Bleakley, Simon Dobson: Congestion mitigation using in-network sensor datasummarization. The 9th ACM International Symposium on Per- formance Evaluation of Wireless Ad Hoc, Sensor, and Ubiquitous Networks. PE-WASUN 2012:p-93-100. Paphos,Cyprus. October 24-25, 2012.

Moumie Soulemane, Mohammad Rafiuzzaman, Hasan Mahmud, "Crawling the Hidden Web: An Approach to," International Journal of Computer Applications, vol. 55, no. 1, pp. 7-15, October 2012.

Fayaz Shahdib, Md. Wali Ullah Bhuiyan, Md. Kamrul Hasan, Hasan Mahmud. Obstacle Detection and Object Size Measurement for Autonomous Mobile Robot Using Sensor Fusion. In the Proceedings of 1st Workshop on Information and Communication Technology, 21-22 June 2012, pp. 9-16, organized by IUT Computer Society, IUT.

S.M. Shahnewaz, Md. Kamrul Hasan, Hasan Mahmud. A Scenario Based API Recommendation System Using Syntax and Semantics of Client Source Code. In the Proceedings of 1st Workshop on Information and Communication Technology, 21-22 June 2012, pp. 17-30, organized by IUT Computer Society, IUT.

Rahman, M.A., Islam, M.N., & Alam, M. (2012). Numerical Solutions of Volterra Integral Equations Using Laguerre Polynomials. Journal of Scientific Research, 4, 357.

F. Ahmed and M. H. Kabir, “Facial feature representation with directional ternary pattern (DTP): Application to gender classification,” in IEEE 13th International Conference on Information Reuse & Integration (IRI), 2012, pp. 159–164.

F. Ahmed and M. H. Kabir, “Directional ternary pattern ( DTP) for facial expression recognition,” in IEEE International Conference on Consumer Electronics (ICCE), 2012, pp. 265–266.

S. J. Kabeer, M. M. Tanvee, A. Rahman, M. A. Mottalib, and M. H. Kabir, “BFSSGA: Enhancing the performance of genetic algorithm using boosted filtering approach,” Int. J. Comput. Appl., vol. 51, no. 19, pp. 29–34, 2012.

Md. Sami Uddin, Jahidul Islam Khan, Hasan Mahmud, "Designing and Implementing Tele-rehabilitation on Hand Skill Development for the Disabled People in Bangladesh," International Journal of Software Engineering (IJSE), vol. 5, no. 2, pp. 37-49, 2012

M. H. Kabir and F. Ahmed, “Face recognition with directional ternary pattern (DTP),” in International Conference on Graphic and Image Processing (ICGIP), 2012, pp. 7E1-7E5.

M. H. Kabir, T. Jabid, and O. Chae, “Local Directional Pattern Variance (LDPv): A Robust Feature Descriptor for Facial Expression Recognition,” Int. Arab J. Inf. Technol., vol. 9, no. 4, pp. 382–391, 2012. (SCIE)

M. R. Karim, M. A. Hossain, M. M. Rashid, B.-S. Jeong, and H.-J. Choi1, “A mapreduce framework for mining maximal contiguous frequent patterns in large dna sequence datasets”, IETE Technical Review, vol. 29, no. 2, pp. 162–168, 2012, issn: 0974-5971, (SCIE).

Civil & Environmental Engineering

Hossain, M. and Muromachi, Y. (2012) A Bayesian network based framework for real-time crash prediction on the basic freeway segments of urban expressways. Accident Analysis and Prevention, Vol. 45, pp. 373-381.

Rifaat, S. M., Tay, R. and DeBarros, A. (2012). Severity of Motorcycle Crashes in Calgary. Accident Analysis and Prevention, Vol. 49, pp. 44- 49. (Web of Science and SCOPUS Indexed)

Rifaat, S. M., Tay, R. and DeBarros, A. (2012). Urban Street Pattern and Pedestrian Traffic Safety, Journal of Urban Design, 17(3), pp. 337-352. (SCOPUS Indexed)

M Pasha, AH Mahmood, I Rahman, and A Hasnat (2012), ‘Assessment of ship breaking and recycling industries in Bangladesh – an effective step towards the achievement of environmental sustainability’, International Conference on Agricultural, Environmental and Biological Sciences (ICAEBS), 26-27 May 2012, Phuket, pp. 43-47.

Bhuiyan, M. A. A., Khan, I. R., Khan, M. R. M., Rifaat, S. M. (2014). Optimizing Signal Timing. An Efficient Way to Handle Traffic Congestion in Developing Countries. Paper Published in the Proceedings of 5th Brunei International Conference on Engineering and Technology, Institute Teknologi Brunei, Brunei, November 1- 3, Paper ID_12.

M Pasha, AH Mahmood, MA Hossain, and S Shams (2012), ‘A study on the impact of domestic and industrial waste on water quality of Turag river’, 2nd International Conference on Environmental Technology and Construction Engineering for Sustainable Development (ICETCESD), vol. 2, 10-12 March 2012, pp. 1104-1111.

Pasha M, Mahmood A.M, Rahman I and Hasnat A (2012) “Assessment of Ship Breaking and Recycling Industries in Bangladesh - An Effective Step Towards The Achievement Of Environmental Sustainability” on International Conference on Agricultural, Environment and Biological Sciences (ICAEBS'2012) May 26-27, 2012, Phuket.

Hasid, A.A, Zaman, M.S., Arin, M. I., Rifaat, S. M. and Al-Amin, M. (2012). A study on the students' perception of pedestrian risk. Published in the proceedings of the 2nd International Conference on Environmental Technology and Construction Engineering for Sustainable Development, March 10-12, Sylhet, Bangladesh. pp. 513- 516.

Md. Rezaul Karim and Nujjat Jahan (2012). Establishment of BOD and COD Relationship of Different Wastewater, Proceedings of the 1st International Conference on Civil Engineering for Sustainable Development (ICCESD-2012), 2 to 3 March 2012, KUET, Khulna, Bangladesh.

H. M. Shahin, T. Nakai, F. Zhang, M. Kikumoto, F. Ito & S. Baba (2012): Investigation of failure mechanism during slope excavation and its counter-measure by elastoplastic FE analysis, Proc. of 11th Int. Sym. On Landsides, Canada, June, vol.2, pp. 1765-1771.

T. Yamaguchi, W. Inoue, H. M. Shahin & T. Nakai (2012): On the particle breakage of geomaterials, Proc. of the 24th Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 51-56.

K. Tsukamoto?M. Koike? K. Yamada?H. Kyokawa?F. Zhang, H. M. Shahin & T. Nakai (2012): Experimental investigation on the behavior of unsaturated soils at soaking, Proc. of the 24th Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 57-62.

K. Asano, R. Ohashi, H. M. Shahin & T. Nakai (2012): Experimental Investigation on particle size distribution shear behavior of sand, Proc. of the 24th Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 105-110.

S. Kuroi, H. M. Shahin, T. Nakai & T. Iwata (2012): Ground behavior during deep tunnel excavation and twin tunnel excavation, Proc. of the 24th Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 111-118.

T. Nakai and H. M. Shahin (2012): Simple and unified modeling of time-dependent behavior for various geomaterials, Proc. of Int. Symposium on Constitutive Modeling of Geomaterials, China, October, pp. 617-625.

H. M. Shahin, T. Nakai and T. Iwata (2012): Model tests and numerical simulation on tunneling in urban area, Proc. of NFCOMGEO-VI, Japan, May, pp. 87-92.

T. Nakai, H. M. Shahin and T. Iwata (2012): Model test and numerical simulations of tunneling considering existing building and tunnel, Proc. of the 5th Sino-Japan Geotechnical Symposium, China, pp. 403-410.

H. M. Shahin, T. Nakai, Y. Yoshida and S. Mio (2012): Effective reinforcing method for increasing bearing capacity, Proc. of the 5th Sino-Japan Geotechnical Symposium, China, pp. 457-463.

H. M. Shahin, T. Nakai, M. Kikumoto and H. Yamazaki (2012): Settlement analyses of clays considering soil-water coupling and creep characteristics, Proc. of the 61st National Congress of Theoretical and Applied Mechanics, Tokyo, Japan, March, OS05-06.

T. Nakai, H. M. Shahin, M. Kikumoto and H. Kyokawa (2012): Description of time-dependent behavior of soils using subloading surface concept, Proc. of the 61st National Congress of Theoretical and Applied Mechanics, Tokyo, Japan, March, OS11-14.

T. Iwata, T. Nakai, H. M. Shahin and S. Kuroi (2012): Model tests and numerical simulations on new tunnel excavation considering the effect of flat foundation, Proc. of the 20th Central Japan JSCE conference (CD-ROM), Japan, March, III.

Y. Yoshida, T. Nakai, H. M. Shahin, Kanou, I. Saito, N. Nagao, K. Toda (2012): Investigation of reinforcing ground using steel sheet pile and nailing - numerical analyses, Proc. of the 20th Central Japan JSCE conference (CD-ROM), Japan, March, II.

R. Ohashi, K. Asano, T. Nakai, M. Kikumoto and H. M. Shahin (2012): Influence of grain size distribution on shear behavior of sand, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 339-340.

T. Okuno, A. Nakaya, T. Nakai, H. M. Shahin (2012): Numerical simulation on shear band formation of Kazusa Group mudstone under loading of triaxial compression test, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 441-442.

W. Inoue, T. Yamaguchi, T. Nakai, H. M. Shahin, M. Kikumoto (2012): Experiment and analysis on the characteristic of breakage for geomaterials, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 475-476.

K. Tsukamoto, M. Koike, K. Yamada, M. Kikumoto, T. Nakai, H.M. Shahin (2012): Experiment of shearing behavior at soaking and after soaking on unsaturated soils, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 659-660.

M. Koike?K. Tsukamoto? K. Yamada?M. Kikumoto?T. Nakai?H. M. Shahin (2012): Simulation of shearing behavior at soaking and after soaking on unsaturated soils, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 661-662.

Y. Yoshida, T. Nakai, H.M. Shahin and Y. Kando, N. Nagao, K. Toda and I. Saito (2012): Investigation of reinforcing method of embankment ground using steel sheet pile in clay ground - numerical analyses, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1003-1004.

T. Nakai, H.M. Shahin, Y. Yoshida and S. Mio (2012): Effective method for increasing bearing capacity with geosynthetics – discussion based on model tests, numerical simulations and fields, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1025-1026.

Masuda, M. Kikumoto, H. M. Shahin, T. Nakai (2012): Effectiveness of ground anchorages in settlement of shallow foundation, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1027-1028.

K. Okuda, M. Kato, K. Okada, T. Nakai, H. M. Shahin, M. Kikumoto (2012): Investigation of the optimal support patterns in ground anchors for earth retaining excavation - model experiment and numerical analyses, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1221-1222.

M. Kato, H.M. Shahin, T. Nakai, M. Kikumoto, T. Konda, H. Ito (2012): Elasto-plastic finite element analyses of earth retaining excavation with anchors, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1223-1224.

T. Iwata, S. Kuroi, T. Nakai, H. M. Shahin (2012): Model tests and numerical simulation of twin tunnel excavation considering excavation sequence, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1257-1258.

H. M. Shahin, T. Nakai, T. Iwata, S. Kuroi (2012): Model tests and numerical simulations of tunneling in deep underground considering existing structure, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1259-1260.

K. Okuda , H. M. Shahin, T. Nakai, M. Kato & Okada (2012): ???????????????????????????????????, Proc. of the 67th conference of the Japan Society of Civil Engineers (JSCE), Nagoya, Japan, September, (CD-ROM).

Yamazaki, H. M. Shahin & T. Nakai (2012): Deformation analysis considering structured and time dependent behavior of soils, Proc. of the 67th conference of the Japan Society of Civil Engineers (JSCE), Nagoya, Japan, September, (CD-ROM).

R. Ohashi, T. Nakai, H. M. Shahin & H. Kyokawa (2012): ????????????????, Proc. of the 67th conference of the Japan Society of Civil Engineers (JSCE), Nagoya, Japan, September, (CD-ROM).

2011 (169)

Mechanical and Production Engineering

Md. Anayet U. Patwari, N. A. Chowdhury, M. D. Arif, Md. S. I. Chowdhury, M. Hasan (2011), “Prediction of surface roughness during Electric discharge machining by Response surface methodology”- Paper ID:26, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2011 (ICMERE2011), 22- 24 December 2011, Chittagong, Bangladesh

Md. Anayet U Patwari, N. A. Chowdhury, N.M Reehan, Arif M Khan (2011) “Investigation of the different mode shape and frequencies of a lathe machine by Finite Element Modal Analysis”-Paper ID:23, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2011 (ICMERE2011), 22- 24 December 2011, Chittagong, Bangladesh

Anayet U Patwari, N.A. Chowdhury, Ikhwanul Imam, A Arefin, M.N. Mahmood (2011), “ Investigation of machinability improvement during turning operation of heat treated mild steel, Paper ID:29, Proceedings of the International Conference on Mechanical Engineering 2011 (ICME2011), 18-20 December 2011, Dhaka, Bangladesh

A.K.M. Nurul Amin, Anayet U. Patwari, Dali M, Musa M.I “Prediction and Investigation of Surface quality in High Speed End-Milling of Silicon to eliminate conventional finishing operations”- Abstract Accepted International conference on Mechatronics 2011, organized by Faculty of Engineering, International Islamic university of Malaysia.

N. A. Chowdhury, Arif M Khan, N.M Reehan, Anayet U. Patwari, Investigating the effect of the cross section of gating system by CFD simulation in cooling of Aluminum alloy in a permanent mould casting” Paper ID:12, Proceedings of the International Conference on Mechanical Engineering 2011 (ICME2011), 18-20 December 2011, Dhaka, Bangladesh

Md. Anayet U Patwari*, M.N. Mahmood, Adib Bin Rashid, Ashikur Rahman (2011),“Computational Flow Analysis to predict the flow pattern and temperature variation inside a Vortex Tube” Paper ID:8, Proceedings of the International Conference on Mechanical Engineering 2011 (ICME2011), 18-20 December 2011, Dhaka, Bangladesh

AKM Nurul Amin, Mohd Dali M Ismail, Muhammad Iqbal Musa; Anayet U Patwari, “Prediction and Investigation of Surface quality in High Speed End-Milling of Silicon to Eliminate Conventional Finishing Operations” Proceedings of ICAMMP conference, December 2011, china

Anayet U. Patwari, , N.M Reehan, M. D. Arif, “Improvement of Machinability of Mild steel during turning operation by Magnetic Cutting”, accepted 2nd international conference on advanced science, engineering and information technology (ICASEIT), paper Id 20; Bangi, Malaysia, 12-13 December 2011.

N. A. Chowdhury, Arif M Khan, N.M Reehan, Anayet U. Patwari, Investigating of the Effect of Rectangular and Trapezium Cross Section of Gating System by CFD Simulation in Cooling of Aluminium Alloy in a Permanent Mould Casting” accepted 2nd international conference on advanced science, engineering and information technology (ICASEIT), paper Id-14; Bangi, Malaysia, 12-13 December 2011.

Sayedus Salehin, Huaichen Zhang, Tomas Larriba Martinez, Giorgos Papakokkinos, Govinda Upadhyay, Eric Bowler, J.M.N. van Kasteren, “Designing of an Emergency Energy Module for relief camp situations: Case study for a Refugee camp in Chad-Sudan Border”, in the proceedings of World Congress of Sustainable Technologies WCST-2011,7-10 November 2011, London, United Kingdom. pp 9-14, published by IEEE [https://ieeexplore.ieee.org/abstract/document/6114227]

Amin, A. K. M. Nurul and Hossain, Ishtiaq and Patwari, Muhammed Anayet Ullah (2011) Wear mechanism in end milling of Inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 247-253. ISBN 978-967-418-175-8.

Amin, A. K. M. Nurul and Mokhtar, Suhaily and Patwari, Muhammed Anayet Ullah and Hazim, A. and Adlan, Z. (2011) Comparison of machinability of ceramic insert in room temperature and cryogenic cooling conditions during end milling inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 217-223. ISBN 978-967-418-175-8.

Hossain, Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Ginta, Turnad Lenggo (2011) Assessment of performance of uncoated and coated carbide inserts in end milling of Ti-6Al-4V through modelling. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 201-207. ISBN 978-967-418-175-8.

Hossain, Ishtiyaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Artificial neural network algorithm for predicting the surface roughness in end milling of Inconel 718 alloy. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM university press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 155-161.

Ishtiyaq, M. H. and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end milling of Inconel 718 using coated WC-Co inserts. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 129-137.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Ishtiyaq, M. H. (2011) A coupled artificial neural network and RSM model for the prediction of chip serration frequency in end milling of Inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 123-129. ISBN 978-967-418-175-8

Hossain, Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Development of an artificial neural network algorithm for predicting the cutting force in end milling of Inconel 718 alloy. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 149-155. ISBN 978-967-418-175-8.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2011) Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: Mechatronics Book Series: Selected papers from ICOM’01, ICOM’05 and ICOM’08. IIUM Press, Kuala Lumpur, pp. 591-597. ISBN 9789670225685

Anayet U Patwari, A.K.M. Nurul Amin, Arif M.D (2011), “Optimization of Surface Roughness in End Milling of Medium Carbon Steel Genetic Algorithm” –special issue of international journal of the computer, the internet and management (IJCIM), volume 19, Number SP1, ISSN 0858702.

Anayet U. Patwari, M. D. Arif, N. A. Chowdhury, and Md. S. I. Chowdhury (2011) “3-D Contour Generation and Determination of Surface Roughness of Shaped and Horizontally Milled Plates Using Digital Image Processing”- Issue-9, Volume-3, International Journal of Engineering, Page 127-130.

KMA Nakoa, MR Karim, SL Mahmood, MAR Akhanda, Effect of colored absorbers on the performance of a built-in-storage type solar water heater, International Journal of Renewable Energy Research (2011), Vol. 1(4), pp. 232-239. DOI: https://ijrer.com/index.php/ijrer/article/view/69 (Impact Factor: 1.3, Q3 Ranked, ISI/Scopus Indexed Journal)

Md. Anayet U. Patwari, M. D. Arif, N. A. Chowdhury, A. Arefin, Iwanul Imam (2011), “Detection, categorization, and assessment of eye cataracts using digital image processing-special issue of international journal of the computer, the internet and management (IJCIM), volume 19, Number SP1, ISSN 0858702.

S. Alam, AKM Nurul Amin, Md. Konneh, Anayet U Patwari, “Surface roughness prediction in high speed flat end milling of ti-6al-4v and optimization by desirability function of RSM- Journal of Advances in Materials processing technology, page 1166-1173, Advance Materials Research, volume: 264-265, transtech publications 2011.

Anayet U Patwari, A.K.M. Nurul Amin, “Artificial Intelligence Model of Surface Roughness for End Milling Operation Of Steel and its verification by Genetic Algorithm” 2nd International Conference on Mechanical Aerospace Engineering (ICMAE 2011)- premier forum for the presentation of new advances and research results in the fields of theoretical, experimental, and applied Mechanical Aerospace Engineering, 29-31 July 2011, Thailand.

Suhaily M, A.K.M. Nurul Amin, Anayet U. Patwari, AKM Hafiz, “Machinability Improvement by work-piece preheating during End Milling of AISI H13 steel” Journal of Advances in Materials processing technology, Advance Materials Research, volume: 264-265, page 894-900, transtech publications 2011.

AKM Nurul Amin, A. Fakruzi Majed, M. K. Daud, M.H Ishtiyaq, Anayet U Patwari, “Investigation of the machinability of Inconel 718 in room temperature and preheating conditions” Journal of Advances in Materials processing technology, Advance Materials Research, volume: 264-265, page 1187-1192, transtech publications 2011.

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris, “Statistical approach for the development of Tangential Cutting Force model in End Milling of Ti6Al4V” Journal of Advances in Materials processing technology, page 1160-1165, Advance Materials Research, volume: 264-265, transtech publications 2011.

Md. Anayet U Patwari, A.K.M. Nurul Amin, Waleed Faris, Marian Azhari, S. Farahain, “Chip serration frequency-the primary cause of chatter during end milling operation”, Journal of Advances in Materials processing technology, page 1174-1179, Advance Materials Research, volume: 264-265, transtech publications 2011.

N. A Chowdhury, Anayet U. Patwari (2011), “Development of a Micro-controller based controlling unit for flexible control of a Robot Structure” ACTA technica corviniensis, volume-2, issue-6, April-june issue, page 105-108.

Suhaily M, A.K.M. Nurul Amin, Anayet U. Patwari “Prediction of surface roughness in high speed machining of Inconel 718, Journal of Advances in Materials processing technology, page 1193-1196, Advance Materials Research, volume: 264-265, transtech publications 2011.

MR Karim, MAR Akhanda, Study of a hybrid photovoltaic thermal (PVT) solar systems using different ribbed surfaces opposite to absorber plate, Journal of Engineering and Technology (JET) (2011), Vol. 9 (1), ISSN 1684-4114, https://old.jet.iutoic-dhaka.edu/assets/publishedPaper/9_1_2.pdf

Md. Anayet U. Patwari, M. D. Arif, N. A. Chowdhury, A. Arefin, Iwanul Imam (2011), “Detection, categorization, and assessment of eye cataracts using digital image processing” e-proceedings of First international conference on interdisciplinary Research and development, organized by Royal Institute of Thailand, 01 June 2011, Thailand

N. A. Chowdhury, Arif M Khan, N.M Reehan, Anayet U. Patwari, Investigating of the Effect of Rectangular and Trapezium Cross Section of Gating System by CFD Simulation in Cooling of Aluminum Alloy in a Permanent Mould Casting” International Journal of advanced science information technology, volume-2, No-3, pp:4-8.

S.M. Ferdous, Walid Bin Khaled, Benozir Ahmed, Sayedus Salehin, Enaiyat Ghani Ovy, “Electric Vehicle with Charging Facility in Motion using Wind Energy”, in the proceedings of World Renewable Energy Congress 2011, 8-11 May 2011, Linkoping, Sweden, pp. 3629-3636, published by Linköping University Electronic Press, Sweden [http://www.ep.liu.se/ecp/057/vol13/017/ecp57vol13_017.pdf]

Anayet U Patwari, AKM Nurul Amin, Waleed F Faris’ “Influence of chip serration frequency on chatter formation in End milling of Ti6Al4V” ASME journal 2011. J. Manuf. Sci. Eng. -- February 2011 -- Volume 133, Issue:1, 011013 (12 pages) doi:10.1115/1.4003478.

Arafat A. Bhuiyan, AKMS Islam, CFD analysis of different fin-and-tube heat exchangers. J. Mech. Eng, vol. 62(4): p. 237-249, 2011.

Arafat A. Bhuiyan, AKMS Islam, MR Amin, Numerical prediction of laminar characteristics of fluid flow and heat transfer in finned-tube heat exchangers. Innovative Systems Design and Engineering, vol. 2(6): p. 1-12, 2011.

Arafat A. Bhuiyan, AKMS Islam, AI Alam, Application of wind resource assessment (WEA) Tool: A case study in Kuakata, Bangladesh. International Journal of Renewable Energy Research (IJRER), vol. 1(3): p. 192-199, 2011.

M. M. Sardar, Md. Zahid Hossain, H.A. Chowdhury and E. G. Ovy, “Investigation of Vibration on Vehicle Suspension System Using Half-car-model” Trans. Tech Publications, Switzerland, Journal of Advanced Material Research, Vol. 199-200, pp. 831-835, 2011

T. Inoue, Y. Ishida, G. Fei, Md. Zahid Hossain, “Suppression of the Forward Rub in Rotating Machinery by an Asymmetrically Supported Guide, Journal of Vibration and Acoustics, Transactions of ASME, Vol. 133, pp. 021005-1 to 021005-9, 2011

M Monjurul Ehsan, R B Hossain, S Salehin, M A Jinnah, “Development of time measuring technique to measure the shock speed during propagation in the open atmosphere”.2nd International conference on Advanced Science Engineering and Information Technology (IJASEIT), 12-13 December, 2011, Malaysia.

M Monjurul Ehsan, Enaiyat Ghani Ovy, Kazy Fayeen Shariar, and S M Ferdous. “A Novel Approach to Provide Firm power with the integration of Pico-Hydro-turbine and wind turbine Installed at the High-Rise Building”. Proceedings of the International Conference on Mechanical Engineering 2011 (ICME2011) 18-20 December 2011, Dhaka, Bangladesh. Paper ID-11-RE-011.

M Monjurul Ehsan, Enaiyat Ghani Ovy, H A Chowdhury and S M Ferdous. “An Approach of Designing and implementing photovoltaic-wind power plant for reliable power generation in Bangladesh”. Proceedings of the International Conference on Mechanical Engineering 2011 (ICME2011) 18-20 December 2011, Dhaka, Bangladesh. Paper ID-ICME11-RE-004.

Electrical and Electronic Engineering

Syed Iftekhar Ali and M. S. Islam, “A novel low-energy match line sensing scheme for ternary content addressable memory using charge sharing,” in Proc. 29th IEEE NORCHIP Conference, pp. 1-4, November 2011, Lund, Sweden.

Muhammad, Md. Ashraful Hoque (2012) "On Analysis of Front End Current of Rectifier Converter for low THD and high PF with SEPIC" International Journal of Computer Applications, Vol : 37 No.04

Mohammad T. Kawser, “LTE Air Interface Protocols”, Artech House, Boston, USA, ISBN 978-1-60807-201-9, 2011.

Islam, M.S., Muhammad and Hoque, M.A. (2011), "TOTAL HARMONIC DISTORTION ANALYSIS OF FRONT END CURRENT FOR DIODE RECTIFIER WITH SEPIC PFC" International Journal of System Simulation. Vol:06 No:01

S.M.Ferdous, Taslim Reza, Md. Nayeemul Hasan, Ahmed Al Mansur, Kazi Firoz Ahmed (21-23 October, 2011). “A surface electromyogram (sEMG) signal guided control system of an automated wheel chair for disable using neck muscle movements.” Thirteenth international conference on electrical machines drives and power system, Verna, Bulgaria.

S.M. Ferdous ,Mohammad Rokonuzzaman, Enayet Ghani Ovy and Md. Ashraful Hoque, “Design and Implementation of a Linear IC Based Low Cost Digital Tachometer for Laboratory and Industrial Application”, Trans Tech Publications, Switzerland, Advanced Materials Research Vols. 201-203, (2011), pp. 1368-13721

Mohammad Rokonuzzaman, S.M. Ferdous, Enayet Ghani Ovy and Md. Ashraful Hoque, “Smooth Track-Keeping and Real Time Obstacle Detection Algorithm and Its PID Controller Implementation for an Automated Wheeled Line Following Robot”, Trans Tech Publications, Switzerland, Advanced Materials Research Vols. 201-203(2011), pp.1966-1971

Shahedul Amin, Riasat Azim, A.S.M. Shiahvuddin and Md. Ashraful Hoque “Spectral and Statistical Analysis of Human Sleep EEG Signals”, Journal of Engineering and Technology, IUT, Vol.8. No.2, December, 2011, pp. 30-50.

M.R. Islam, Md. M. Hossain, Md. A. Hoque, K.K. Islam and M.S. Ullah, “ Low Density Parity Check Code in Cooperative MIMO Communication at Wireless Sensor Network”, Radioeelectronics and Communication Systems, 2011, Vol. 54, No. 7, pp.359-366, ISSN 0735-2727, Springer.

Md. Rokibul Islam, A.S.M. Shihavuddin, M.A. Naser, S.M. Ferdous and Md. Ashraful Hoque. “Inspection of the Interior Surface of a Cylindrical Pipe by Omnidirectional Image Acquisition System”, Cyber Journals Multidisciplinary Journals in Science and Technology, Journal of Science and Collaborative Contributions, June, 2011

M.J. Hossain, M.A. Hoque and K.K. Islam, “Simplified Fuzzy Control for Flux-Weakening Speed Control of IPMSM Drive”, Hindawi Publishing Corporation , Advances in Fuzzy Systems, Volume 2011, Article ID 354980.

Shah Ahsanul Haque, Muhammad Rakibul Islam and Md. Ashraful Hoque, “Analysis of Probability Factors for Permanent Channels in a Mobile Environment”, International Journal of Electrical, Electronics and Computer Systems (IJEECS), Vol.3, Issue 2, August 2011, pp.28-33.

Shah Ahsanul Haque, Muhammad Rakibul Islam and Md. Ashraful Hoque, “Simulation on Phenomenon of Subcarrier and Subchannelization Concept in a Transmission over a Multipath Wireless Channel”, International Journal of Electrical, Electronics and Computer Systems (IJEECS), Vol.3, Issue 2, August 2011, pp. 28-36

Md. Riyasat Azim and Md. Ashraful Hoque, “A Fuzzy Logic based Dynamic Voltage Restorer for Voltage Sag and Swell Mitigation for Industrial Motor Loads”, International Journal of Computer Applications (0975-887), Vol. 30, No.08, September 2011, pp. 9-18.

Mohammad T. Kawser, Nafiz I. B. Hamid and Mohammad Nur-A-Alam, “Multiple Neighbor Lists in the Same Cell for LTE”, International Conference on Computer Engineering and Technology (ICCET), Kuala Lumpur, Malaysia, June 17–19, 2011. DOI: 10.1115/1.859735

Syed Iftekhar Ali and M. S. Islam, “A high-speed and low-energy ternary content addressable memory design using feedback in match-line sense amplifier”, International Journal of Electrical and Computer Engineering, vol. 6, no. 1, pp. 28-36, 2011.

Technical and Vocational Education

Jinnah, M. A., Abdullah-Al-Mamun, M., Khan, M. S. H., & Hasan, M. (2011). ICT in vocational teaching/learning and research in Southeast Asian Countries: A case of Bangladesh. International Journal of Vocational and Technical Education, 3(2), 20-28.

Muzahid, Mohammad Amanuddin, Research topic; Waqf Management in Islam: and contribution to Socio- Economic Development. Published by; Islamic Research center Rajshahi University, Journal of 6th Vol. No-2011, ISSN-2072-9162, pages -13

Muzahid, Mohammad AmanUddin, Research topic; Islamic Lifestyle as an Infrastructure for Social Justice, Published by; The Journal of Universal Peace Federation, New York. USA. Journal of Dialogue & Alliance, Published; 2012, pages -07 ISSN 0891-5881 Vol. 25, No. 2, 2011

Seung L. H. & Raihan, M.A. (October, 2011). Integration of E-learning in Technical and Vocational Education (TVE) to Change the Socio-economic Stipulation for Sustainable Development. The 12th International Conference on Educational Research (ICER), International Education Cooperation for Sustainable Development in the Context of Globalization. Hosted by Educational Research Institute, Seoul National University and Korean Educational Development Institute (KEDI), p.8, Session 8, Oct. 26-28, 2011. (International Conference)

Raihan, M.A. (June, 2011). Trend and Contemporary Issues of Adult Literacy in Bangladesh by Focusing the Activities of DAM. Conference on Adult Education, organized by the Society of Adult and Lifelong Education in Seoul, South Korea. pp. 295-324. (International Conference)

Raihan, M.A. (October, 2011). Present Socio-economic Reform: Focusing on issues involved in Grameen Enterprise in Bangladesh. Educational Welfare international Symposium on Tasks on Educational Welfare for Sustainable Future. Organized by BK21 Educational Welfare Research Center (EWRC), Department of Education of Kongju National University and Educational Research Institute and Korea Rural Education Center (KoREC) by coordination of Hokkaido University in JAPAN. pp. 90-100. (International Symposium)

Raihan, M.A. (February, 2011). Adult Education and Socio-economic Empowerment of the Rural People: Case of Bangladesh. Korea-Japan Society of Educational Administration Symposium, New directions for educational welfare in rural schools, The Second International Symposium for Innovation in Rural Education (ISFIRE2), Kongju National University, South Korea. pp. 520-555. (International Symposium)

Raihan, M.A. (September, 2011). Technology Integration for Innovative learning Based on Constructivism. Education Forum 2011, Organized by Department of Education. Kongju National University, Gongju, South Korea. pp. 29-59. (Educational Forum)

Shamim, R. H., Raihan, M.A., & Bashar, A. (2011). Teaching-learning Methods and Feedback Used in Effective Teaching. Bangladesh Journal of Islamic Thought, Bangladesh Institute of Islamic Thought (BIIT), ISSN: 1816-689X, Vol.7, (9), pp. 93-120.

Computer Science and Engineering

S.M. Shahnewaz, Md. Asikur Rahman, Hasan Mahmud, "A Self Acting Initial Seed Selection Algorithm for K-means Clustering Based on Convex-Hull". In: Abd Manaf A., Zeki A., Zamani M., Chuprat S., El-Qawasmeh E. (eds) Informatics Engineering and Information Science. ICIEIS 2011. Communications in Computer and Information Science, vol 252. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-25453-6_54

Y. G. Lee, Y. K. Yoon, O. Chae, and M. H. Kabir, “Method And Apparatus For Motion Compensation,” US Patent 8036525, Oct-2011.

Hasan Mahmud, Moumie Soulemane and Mohammad Rafiuzzaman, "A framework for dynamic indexing from hidden web", International Journal of Computer Science Issues, vol. 8, no. 5, pp. 249-258, 2011.

Islam, M.S., Alam, M.M., Hong, C., & Lee, S. (2011). eMCCA: An enhanced mesh coordinated channel access mechanism for IEEE 802.11s wireless mesh networks. Journal of Communications and Networks, 13, 639-654.

Hamid, M.A., Abdullah-Al-Wadud, M., & Alam, M.M. (2011). A reliable structural health monitoring protocol using wireless sensor networks. 14th International Conference on Computer and Information Technology (ICCIT 2011), 601-606.

Rahman, M.O., Alam, M.M., Monowar, M., Hong, C., & Lee, S. (2011). nW-MAC: multiple wake-up provisioning in asynchronously scheduled duty cycle MAC protocol for wireless sensor networks. annals of telecommunications - annales des télécommunications, 66, 567-582.

Alam, M.M., Islam, M.S., Hamid, M.A., Hong, C., & Lee, S. (2011). Congestion-aware fair rate control in wireless mesh networks. annals of telecommunications - annales des télécommunications, 66, 275-291.

M. Murshed, M. H. Kabir, and O. Chae, “Moving object tracking–an edge segment based approach,” International Journal of Innovative Computing, Information and Control, vol. 7, no. 7, pp. 3963–3979, 2011. (ESCI)

Faisal, A., Emam, H., A.S.M., H., & Hossen, S. (2011). Compound Local Binary Pattern (CLBP) for Rotation Invariant Texture Classification. International Journal of Computer Applications, 33, 5-10.

T. Jabid, M. H. Kabir, and O. Chae, “Local Directional Pattern (LDP) for Face Recognition,” International Journal of Innovative Computing, Information and Control, vol. 8, no. 4, pp. 2423–2437, 2011. (ESCI)

Md. Rezaul Karim, Md. Mamunur Rashid, Hossain Md. Azam and Byeong-Soo Jeong, "A Parallel and Distributed Programming Model for Mining Correlated, Associated, Associated-Correlated and Independent Patterns from Large Transactional Databases Using MapReduce on Hadoop¡±, Proc.The 6th International Conference on Ubiquitous Information Technologies and Applications , Seoul, South Korea, Dec, 15-17, 2011

Civil & Environmental Engineering

Hossain, M. and Muromachi, Y. (2011). Understanding crash mechanism and selecting appropriate interventions for real-time hazard mitigation on urban expressways. Transportation Research Record, Issue 2213, pp. 53-62.

Rifaat, S. M., Tay, R., DeBarros, A. (2011). Logistic Model of Injury Risks in Single Vehicle Crashes in Urban Neighborhoods. Journal of Advanced Transportation, Vol. 45(3), pp. 186-195. (Web of Science and SCOPUS Indexed)

Rifaat, S. M., Tay, R. and DeBarros, A. (2011). Effect of land use, road infrastructure, socioeconomic and demographic characteristics on public transit usage. Published in the Proceedings of the 16th International Conference organized by Hong Kong Society for Transportation Studies(HKSTS) from 17 to 20 December, 2011 in Hong Kong, pp. 625- 630.

15. M. A. Islam, H, Sakakibara, M. R. Karim and M. Sekine (2011). Rural water consumption behavior: A case study in Southwest Coastal Area, Bangladesh, proceedings of the 2011 Water Environmental and Water Resources Congress, 22-26 May, 2011, Palm Springs, CA, USA.

Rifaat, S. M., Tay, R., DeBarros, A. (2011). Effect of Street Pattern on the Severity of Crashes Involving Vulnerable Road Users. Accident Analysis and Prevention, Vol.43, pp. 276-283. (Web of Science and SCOPUS Indexed)

Md. Rezaul Karim, Saskia Manshoven, Md. Rafizul Islam, Juan Antinio Gascon, Mikel Ibarra, Ludo Diels and Md. Mizanur Rahman (2011). Assessment of Groundwater Pollution from the Contaminated Site by Tannery Effluent at Hazaribagh Area in Dhaka City, proceeding of the 3rd International Conference on Water & Flood management (ICWFM-2011), pp.461-468, 8-10 January, 2011, BUET, Dhaka, Bangladesh.

Md. Rezaul Karim, Saskia Manshoven, Md. Rafizul Islam, Juan Antinio Gascon, Mikel Ibarra, Ludo Diels and Md. Mizanur Rahman (2011). Assessment of a Contaminated Site by Tannery Industries in Dhaka City, Bangladesh, proceeding of the 4th IPWE 2011, CD-ROM, 4-6 January, 2011, Singapore.

Alam, M. S., Sakib, N., & Mumtaz, M. (2011). "Seismic loss assessment of Dhaka for scenario earthquakes using a displacement-based method." International Journal of Civil & Environmental Engineering, 11(5), pp. 29-33.

Rifaat, S.M. (2011). Effect of Street Pattern on the Severity of Younger Driver Involved Crashes: Are Policy Decisions Sensitive to Different Modeling Methodology? Published in the Proceedings of the First Forum on Traffic Safety: The Reality, Experiences and Hope, International Conference organized by University of Dammam, KSA in collaboration with Saudi Traffic Safety Society, Saudi Aramco and the Road Safety Committee in the Eastern Region on 12-13 December, Dammam, KSA. pp. 36- 50.

Md Atikul Islam, Hiroyuki Sakakibara, Md. Rezaul Karim, Masahiko Sakine and Zahid Hayat Mahmud (2011). Bacterial Assessment of Alternative Water Supply Options in Coastal Areas of Bangladesh, Journal of Water and Health, 9.2, pp. 415-428, IWA Publishing.

Md. Atikul Islam, Hiroyuki Sakakibara, Md. Rezaul Karim and Masahiko Sekine (2011). Evaluation of risk communication for rural water supply management: a case study of a coastal area of Bangladesh, Journal of Risk Research, 14, pp. 1237-1262, Routledge Publisher (Taylor & Francis Group).

M. A. Islam, M. R. Karim, T, Higuchi, H, Sakakibara, & M. Sekine (2011). Survey of trace metals in drinking water supply options in coastal areas of Bangladesh. Proceedings of the 35th WEDC International Conference; the future of Water, Sanitation and Hygiene: Innovation, Adaption and Engagement in a changing world, Loughborough, UK.

T. Nakai, H. M. Shahin, M. Kikumoto, H. Kyokawa, F. Zhang & M.M. Farias (2011): New approach for modeling time-dependent behavior of geomaterials, Proc. of the 2nd International Symposium on Computational Geomechanics, April, Croatia, pp. 49-62.

T. Nakai, H. M. Shahin, H. Kyokawa and Y. Miyahara (2011): Modeling of one-dimensional consolidation behavior for clays, 14th Asian Reg. Conf. on Soil Mech. and Geotechnical Engineering, Hong Kong, May, pp. 128.

H. M. Shahin, M. Kikumoto and Y. Uetani (2011): Influence of existing foundations on retaining wall in braced excavation, 14th Asian Reg. Conf. on Soil Mech. and Geotechnical Engineering, Hong Kong, May, pp. 267.

H. M. Shahin, T. Nakai, F. Zhang, M. Kikumoto & E. Nakahara (2011): Behavior of ground and response of existing foundation due to tunneling, Soils and Foundations, vol. 51, no. 3, pp. 395-409.

R. Ohashi, H. Kyokawa?M. Kikumoto?T. Nakai?H. M. Shahin & A. Ban (2011): The influences of stress histories on the deformation characteristics of sand, Proc. of the 23rd Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 11-18.

K. Okuda, M. Kato?M. Kikumoto?T. Nakai & H. M. Shahin (2011): Investigation of rational support patterns in ground anchors for braced excavation ~ model tests and numerical analyses ~, Proc. of the 23rd Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 43-50.

H. M. Shahin, T. Nakai, M. Kikumoto, R. Sakai, Y. Yoshida, I. Saito, N. Nagao & K. Toda (2011): Investigation of a reliable reinforcing method for embankment ground, 1st International Conference on Geotechnique, Construction Materials and Environment, Mie, Japan, November, 2011, pp. 71-76.

T. Iwata, T. Nakai, H. M. Shahin, M. Kikumoto & K. Ishii (2011): Model tests of twin tunnel excavation using newly developed device and its numerical simulations, Tunnel Engineering – Journal of JSCE, vol. 67, no. 3, pp. 33-44.

M. Kikumoto, T. Nakai, H. M. Shahin, K. Ishii & T. Iwata (2011): Model tests of twin tunnel excavation considering practical convergence and earth pressure distribution on lining and its simulation, Tunnel Engineering – Journal of JSCE, vol. 67, no. 3, pp. 57-64.

T. Nakai, H. M. Shahin, M. Kikumoto, H. Kyokawa, F. Zhang & M. M. Farias (2011): A simple and unified one-dimensional model to describe various characteristics of soils, Soils and Foundations, vol. 51, no. 6, pp. 1129-1148.

T. Nakai, H. M. Shahin, M. Kikumoto, H. Kyokawa, F. Zhang & M. M. Farias (2011): A simple and unified three-dimensional model to describe various characteristics of soils, Soils and Foundations, vol. 51, no. 6, pp. 1149-1168.

H. M. Shahin, T. Nakai & D. Pedroso (2011): Explicit Integration of Subloading tij Constitutive Model in FEM Analysis, Journal of Geotechnical Engineering, vol. 1, no. 1, pp. 16-28.

T. Okuno, H. Sugiyama, T. Nakai and H. M. Shahin (2011): Numerical analysis on centrifuge model test for noncircular large tunnel and behavior of soft rock mass based on subloading tij model, Proc. of the 40th Symposium of Rock Mechanics (CD-ROM), Japan, January.

K. Okuda, M. Kikumoto?H. M. Shahin, T. Nakai?K. Ishii and M. Kato (2011): Effectiveness of anchor in retaining wall problem and the influence of anchor length: 2D model tests and numerical simulations, Proc. of the Central Japan JSCE conference (CD-ROM), Japan, March, pp.225-226.

T. Iwata, H. M. Shahin, M. Kikumoto?T. Nakai?K. Ishii and T. Kito (2011): Model tests on tunnel excavation considering realistic internal displacement and surrounding earth pressure, Proc. of the 19th Central Japan JSCE conference (CD-ROM), Japan, March, pp.229-230.

M. Kikumoto, H. Kyokawa, T. Nakai, H.M. Shahin, K. Tatematsu, M. Koike and K. Tsukamoto (2011): Elastoplastic description of soil compaction and successive deformation behaviour, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 21-22.

T. Nakai, H.M. Shahin, M. Kikumoto and H. Kyokawa (2011): Explanation of time-dependent models for clays in one-dimensional condition, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 301-302.

A. Nakaya, T. Okuno, T. Nakai, H.M. Shahin (2011): A deformation characteristic of the Kazusa layer mudstone based on consolidation and triaxial compression tests, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 441-442.

T. Okuno, A. Nakaya, T. Nakai, H.M. Shahin (2011): Numerical simulation using subloading tij model on behavior of mudstone under loading of triaxial compression test, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 443-444.

K. Tatematsu, M. Koike, K. Tsukamoto, H. Kyokawa, M. Kikumoto, T. Nakai, H.M. Shahin (2011): Soaking behavior of unsaturated soils under compression and extension conditions and its simulation, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 683-684.

M. Koike, K. Tatematsu, K. Tsukamoto, H. Kyokawa, M. Kikumoto, T. Nakai and H. M. Shahin (2011): Exhausted - undrained compression test reproducing soil compaction and its simulation, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 695-696.

H. Yamazaki, W. Inoue, H. Kyokawa, T. Nakai, H. M. Shahin, M. Kikumoto (2011): Constant strain rate consolidation test on naturally deposited clay and numerical analysis considering bonding and time dependency, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 787-788.

R. Sakai, T. Nakai, H. M. Shahin, M. Kikumoto, Y. Yoshida, I. Saito, N. Nagao, K. Toda (2011): Investigation of reinforcing of ground using composite construction method of steel sheet pile and nailing - model tests and numerical analyses, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 1123-1124.

M. Kikumoto, T. Nakai, H.M. Shahin, H. Hirase and S. Shibata (2011): Adaptive method for controlling settlement of flat foundation by anchors and its experimental validation, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 1159-1160.

H. Nakayama, H.M. Shahin, T. Nakai (2011): Evaluation on shear resistance depending on the shape of the cross section of steel sheet piles, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp.1329-1320.

K. Okuda, M. Kato, M. Kikumoto, H. M. Shahin, T. Nakai (2011): Model test on the mechanical behavior of anchor retaining wall, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 1357-1358.

M. Kato, K. Okuda, M. Kikumoto, H.M. Shahin, T. Nakai (2011): Model test on the mechanical behavior of anchor retaining wall, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 1359-1360.

H. M. Shahin, T. Nakai, M. Kikumoto, K. Ishii and T. Iwata (2011): Development of a new device for model tunnel excavation, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp.1411-1412.

T. Iwata, K. Ishii, T. Kito, T. Nakai, H. M. Shahin, M. Kikumoto (2011): Model tests of single tunnel excavation using newly developed device and its numerical simulation, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp.1413-1414.

K. Ishii, T. Iwata, T. Kito, T. Nakai, H. M. Shahin, M. Kikumoto (2011): Model tests of twin tunnel excavation using newly developed device and its numerical simulation, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 1415-1416.

H. Sugiyama, T. Okuno, T. Nakai, H.M. Shahin (2011): Centrifuge model test and numerical analysis on non-circular large tunnel, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 1421-1422.

M. Hinokio, T. Nakai, and H.M. Shahin (2011): Investigation of tunnel behavior subjected to cyclic shear deformation using finite element analysis, Proc. of the 46th Japan national conference on geotechnical engineering, Kobe, Japan, July, pp. 1419-1420.

T. Iwata, M. Kikumoto, H. M. Shahin, T. Nakai, K. Ishii (2011): Model test on tunnel excavation with mixed-type boundary and its simulation, Proc. of the 56th Japan Geotechnical Engineering Symposium, Tokyo, Japan, November, pp. 53-60.

M. Kikumoto, M. Kato, K. Okuda, H. M. Shahin, T. Nakai (2011): Support mechanism and effective arrangements of ground-anchors in braced excavation, Proc. of the 56th Japan Geotechnical Engineering Symposium, Tokyo, Japan, November, pp. 137-144.

M. Kato, M. Kikumoto, T. Nakai, H.M. Shahin, Y. Uetani (2011): Influences of braced excavation on the neighboring foundation, Proc. of the 56th Japan Geotechnical Engineering Symposium, Tokyo, Japan, November, pp. 145-152.

2010 (139)

Mechanical and Production Engineering

Suhaily M, A.K.M. Nurul Amin, Anayet U. Patwari, A. Hazim, Z. Adlan “Comparison of machinability of ceramic inserts in room temperature and cryogenic cooling conditions during end milling of Inconel 718”- Proceedings of International conference of Science and Technology (ICSTIE 2010), 16-17th December 2010, Pulau Pinang, Malaysia

Anayet U Patwari, A.K.M Nurul Amin, Turnad L. Ginta, “ A coupled Artificial Neural Network and Response surface methodology for the Prediction of average Surface Roughness in End milling of preheated Ti6Al4V alloy”, International Journal of Engineering, Annals of Faculty of Engineering Hunedoara Romania, TOME VIII (2010), Issue 3, Page: 190-195, ISSN-1584-2673.

Anayet U Patwari, AKM Nurul Amin, Waleed F Faris, M.H Ishtiyaq (2010) “Investigation of formation of chatter in a non-wavy surface during thread cutting and turning operations” Journal of Advances Materials Research (AMR), advances in materials processing vols 83-86, pp 637-645, Trans Tech publication Switzerland.

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris (2010), “Role of chip serration frequency in chatter formation during End Milling operation of stainless steel”, Journal of advanced materials research (AMR), Trans Tech publication Switzerland,vols.97-101,pp.1989-1992, doi.10.4028/www.scientific.net/AMR.97-101.1989.

N. A Chowdhury & Anayet U. Patwari, (2010) “Improvement of surface quality using a designed ball burnishing rolling tool” Journal of Engineering, Annals of Faculty of Engineering Hunedoara Romania TOME VIII (2010), Issue 1, Page: 147-152, ISSN-1584-2665.

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris, M.H Ishtiyaq “Development of a Mathematical model for the Prediction of Chip Formation Instability and its verification by Fuzzy logic with genetic algorithm”—International Journal of Machining & Machinability of Materials, Volume 8, Nos: 1/2, 2010, Special Issue on Artificial Intelligence applied in Machining, pp 38-54.

S. Alam, AKM Nurul Amin, Md. Konneh, Anayet U Patwari “Prediction and Investigation of Surface Response in High Speed End- Milling of Ti-6Al-4V and its optimization by Genetic algorithm”, Journal of Advances Materials Research (AMR), advances in materials processing vols 83-86 (2010), pp 1009-1015, Trans Tech publication Switzerland.

A.M.K Hafiz, A.K.M.N Amin, M.A. Lajis, Anayet U. Patwari, “Prediction of Tool life and Experimental Investigation and during Hot Milling of AISI H13 Tool steel”- Journal of Advances Materials Research (AMR), advances in materials processing vols 83-86 (2010), pp 190-197, Trans Tech publication Switzerland.

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris (2010)“Identification Chip Serration Frequency and its Prediction model during End Milling of Medium carbon steel (S45C)-vol.3, issue 1, pp.193-200, American Journal of Applied Sciences

Arif M.D, Anayet U Patwari, N.A Chowdhury (2010),“Surface Roughness Characterization Using Digital Image Processing Technique” MED-34, 13th Annual paper meet, IEB Dhaka

Anayet U Patwari, A.K.M. Nurul Amin, Waleed Faris, Sharulhazrin M.S, Hafizzudin I, “A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45), Proceedings of international multi-conference of Engineers and computer scientists 2010, Volume III, march 17-19, 2010, Hong kong.

Anayet U Patwari, A.K.M. Nurul Amin, Waleed Faris, Sharulhazrin M.S, Hafizzudin I, “A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45), Proceedings of IAENG International conference on Industrial Engineering, 17-19 March 2010, Hong Kong.

AKM Nurul Amin, I,H Jaffar, A. U. Patwari, W.W.D Zubaire “Role of Discrete nature of chip formation and natural vibrations of system components in chatter formation during metal cutting”– IIUM Engineering Journal, Vol. 11, No.1, pp. 124-138, 2010

AA Bhuiyan, “Numerical analysis of thermal and hydraulic performance of fin and tube heat exchangers” Vol. II, pp. 885-890, 13th Asian Congress of Fluid Mechanics(13ACFM), December 17-21, 2010, Dhaka, Bangladesh.

RI Zaman, AA Bhuiyan, “Numerical study of 3D natural- convection in a rectangular enclosure with two heated sections on the bed surface”, Vol. II pp. 784-787, 13th Asian Congress of Fluid Mechanics (13ACFM), December 17-21, 2010, Dhaka, Bangladesh.

M. Ahiduzzaman, AA Bhuiyan, “Optimization of Design Parameter of Rice Parboiling Boiler”, Vol. I, pp. 426-429, 13th Asian Congress of Fluid Mechanics (13ACFM), December 17-21, 2010, Dhaka, Bangladesh.

S. Shams, AA Bhuiyan, “Sustainable construction: a step towards reducing CO2 emission”, The 1st Built Environment Development Symposium: Real Estate and Housing Sustainability, Dammam 17-19 Zul Qaedah 1431/ 25-27 October 2010.

AA Bhuiyan and A.K.M.S. Islam, “A numerical investigation on heat transfer and pressure drop performance of typical wavy fin-and-tube heat exchanger”, The 7th Jordanian International Mechanical Engineering Conference (JIMEC’7), 27 - 29 September, Amman – Jordan, 2010.

AA Bhuiyan and A.K.M.S. Islam, “CFD analysis of different Fin-and-Tube Heat Exchangers”, 13APM, MED, IEB, Dhaka, September 25, 2010.

AA Bhuiyan, “Wind resource assessment at Kuakata”, 11th World Renewable Energy Congress and Exhibition(WRECXI), Abu Dhabi, United Arab Emirates, 25–30 September 2010.

AA Bhuiyan and A.K.M.S. Islam, “Performance and Social Aspect of LED based Solar system: A Case study in Bangladesh”, 11th World Renewable Energy Congress and Exhibition(WRECXI), 25–30 September, 2010, Abu Dhabi, United Arab Emirates.

Karim, MR., AA Bhuiyan, “Improvement of Hybrid Photovoltaic Thermal Solar Energy Systems”, 11th World Renewable Energy Congress and Exhibition (WRECXI), 25–30 September, 2010, Abu Dhabi, United Arab Emirates.

AA Bhuiyan, "A Numerical Investigation of Fluid Flow and Heat Transfer in a Three-Dimensional Plain Fin-and-Tube Heat Exchanger", 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 19-21 July 2010, Antalya, Turkey.

AA Bhuiyan, “Wind resource assessment tool: Development and Implementation”, International Conference on Advances in Renewable energy Technologies (ICARET), July 7-9, 2010, Malaysia.

M. H. Rahman and A K M Sadrul Islam, "CFD Modeling of Natural and Forced Ventilation System in a Conventional Kitchen in Bangladesh" published in the 13th Asian Congress of Fluid Mechanics, 17-21 December, 2010, Dhaka, Bangladesh.

S. M. A Hasnine, M. H. Rahman, A. K. M. Sadrul Islam, “Numerical Modeling of Plume Dispersion around the Residential Buildings" published in the 13th Asian Congress of Fluid Mechanics, 17-21 December, 2010, Dhaka, Bangladesh.

S. M. A Hasnine, M. H. Rahman, A. K. M. Sadrul Islam, “CFD Simulation of Wind Field in the IUT Campus" published in the 13th Asian Congress of Fluid Mechanics, 17-21 December, 2010, Dhaka, Bangladesh.

A.K.M. Sadrul Islam, M. Ruhul Amin, Arafat A. Bhuiyan, and M. H. Rahman, "A Numerical Investigation of Fluid Flow and Heat Transfer in a Three-Dimensional Plain Fin-and-Tube Heat Exchanger" proceedings of 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 19-21 July 2010, Antalya, Turkey

Rahman, M., H., Hassan, I., and Kim. S. I, “Unsteady Tip Leakage Flow Characteristics and Heat Transfer on Turbine Blade Tip and Casing” published in the proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air GT2010, June 14-18, 2010, Glasgow, UK.

Electrical and Electronic Engineering

Syed Iftekhar Ali and M. S. Islam, “A high-speed and low-power ternary CAM design using match-line segmentation and feedback in sense amplifiers”, in Proc. IEEE International Conference on Computer and Information Technology (ICCIT 2010), pp. 221-226, December 2010.

Syed Iftekhar Ali and M. S. Islam, “High-speed and low-energy ternary content addressable memory using two-step comparison and feedback sense amplifier”, in Proc. IEEE International Conference on Electrical and Computer Engineering (ICECE), pp. 93 – 96, December 2010.

Nahina Islam, Nafiz Imtiaz Bin Hamid, Adnan Mahmud, Sk. M. Rahman and Arafat H. Khan, "Detection of Some Major Heart Diseases Using Fractal Analysis"- International Journal of Biometrics and Bioinformatics. Volume 4, Issue 2, 2010, pp. 63-70.

Nafiz Imtiaz Bin Hamid, Md. R. H. Khandokar, Taskin Jamal, Md.A. Shoeb and Md. Zakir Hossain - "In Quest of the Better Mobile Broadband Solution for South Asia Taking WiMAX and LTE into Consideration " - Journal of Telecommunications, Vol.2 Issue 1, April 2010. pp.86-94.

Nafiz Imtiaz Bin Hamid, Adnan Mahmud, Mohammad Tawhid Kawser-"Some Vital Aspects of Mobile WiMAX: Mobility and Handover Issues With PHY, MAC Layer Analysis" in 2010.ISBN:978-3-639-24922-4. Available at ACM Digital Library and Amazon.com

Islam, Mohammad Rakibul; Hoque, Md. Ashraful; Islam, Kazi Khairul; Ullah, Md. Shahid, “Cooperative communication in wireless sensor network using low density parity check codes”, 2010 International Conference on Electrical and Computer Engineering (ICECE), 2010 , Page(s): 662 - 665

Naser, M. A.; Hossain, Md. Murad; Tito, Shafiqur Rahman; Hoque, Md. Ashraful, “Recognition of bangla characters using regional features and principal component analysis”, 2010 International Conference on Electrical and Computer Engineering (ICECE), 2010 , Page(s): 506 – 509.

Technical and Vocational Education

Khan, M. S. H., Clement, C. K. & Aktaruzzaman, M. (2010). Practice of Lifelong Learning in Technical and Vocational Education: A Case of Islamic University of Technology (IUT), Paper presented at Lifelong Learning International Conference (3LInC'10), Kuala Lumpur, Malaysia, 10-12 November, 2010.

Khan, M. S. H., Mamun, A.A., Shamim, R.H. (2010) Use of ICT: Its helpfulness to Enhance Teaching-Learning in Technical Educational Institutions. Paper presented at the 15th International Conference on Education, Sultan Hassanal Bolkiah Institute of Education, Universiti Brunei Darussalam, Brunei, 24-27 May, 2010.

Raihan, M.A. (November, 2010). Blended Learning and the Domains of Learning. KAEM CONFERENCE 2010, The conference was supported by the National Research Foundation (NRF) of KOREA, Grant funded by Korean Government. 2010, pp. 1-36. (International Conference)

The history of Islamic Education in Indian sub-continent : An Analysis, Journal of Islamic University Studies, 2010

Computer Science and Engineering

Abu Raihan M. Kamal, Mohammad Abdur Razzaque, Paddy Nixon: 2PDA: two-phase data approximation in wireless sensor network. The 8th ACM International Symposium on Performance Evaluati n of Wireless Ad Hoc, Sensor, and Ubiquitous Networks. PE- WASUN 2010:p-1-8. Bodrum, Turkey. October 17-21, 2010.

Hasan Mahmud, S. M. Didar-Al-Alam, Md. Sarwar Morshed, Md. Obaidul Haque and Md. Kamrul Hasan, "Designing access control model and enforcing security policies using PERMIS for a smart item e-health scenario," International Journal of Engineering Science and Technology, vol. 2, no. 8, pp. 3777-3787, 2010.

Md. Sarwar Morshed, Hasan Mahmud and S. M. Didar-Al-Alam, "Evaluation of nonlinearity effects on performance of DVB-H transmission link," International Journal of Engineering Science and Technology, vol. 2, no. 8, pp. 3854-3864 , 2010.

Hossen, M.S., Kabir, A., Khan, R.H., & Azfar, A. (2010). Interconnection between 802.15.4 Devices and IPv6: Implications and Existing Approaches. ArXiv, abs/1002.1146.

T. Jabid, M. H. Kabir, and O. Chae, “Robust facial expression recognition based on local directional pattern,” ETRI J., vol. 32, no. 5, pp. 784–794, 2010. (SCI)

Monowar, M., Alam, M.M., Rahman, M.O., Hong, C., & Lee, S. (2010). A load-aware energy-efficient and throughput-maximized asynchronous duty cycle MAC for wireless sensor networks. annals of telecommunications - annales des télécommunications, 65, 777-794.

Islam, S., Alam, M.M., & Hong, C. (2010). An efficient multi-channel communications scheme for wireless sensor network.

Islam, M.S., Alam, M.M., Hong, C., & Lee, S. (2010). Load-Adaptive Practical Multi-Channel Communications in Wireless Sensor Networks. Sensors (Basel, Switzerland), 10, 8761 - 8781.

Monowar, M., Alam, M.M., Rahman, M.O., & Hong, C. (2010). LER-MAC: A Load-independent Energy-efficient and Rate-control Integrated Asynchronous Duty Cycle MAC for Wireless Sensor Networks. 2010 IEEE International Symposium on "A World of Wireless, Mobile and Multimedia Networks" (WoWMoM), 1-9.

Alam, M.M., Hamid, M.A., Razzaque, M.A., & Hong, C. (2010). Fair Scheduling and Throughput Maximization for IEEE 802.16 Mesh Mode Broadband Wireless Access Networks. IEICE Trans. Commun., 93-B, 1459-1474.

Islam, M.S., Alam, M.M., Hamid, M.A., Hong, C., & Lee, S. (2010). EFT: a high throughput routing metric for IEEE 802.11s wireless mesh networks. annals of telecommunications - annales des télécommunications, 65, 247-262.

Hamid, M.A., Alam, M.M., Islam, M.S., & Hong, C. (2010). Enforcing Fairness for Data Collection in Wireless Sensor Networks. 2010 8th Annual Communication Networks and Services Research Conference, 192-198.

Islam, M.S., Alam, M.M., Hong, C., & Sung, J. (2010). Enhanced Channel Access Mechanism for IEEE 802.11s Mesh Deterministic Access. 2010 IEEE Wireless Communication and Networking Conference, 1-6.

Islam, M.S., Alam, M.M., Hamid, M.A., & Hong, C. (2010). High throughput path selection for IEEE 802.11s based wireless mesh networks. ICUIMC '10.

T. Jabid, M. H. Kabir, and O. Chae, “Facial expression recognition using Local Directional Pattern (LDP),” in IEEE International Conference on Image Processing (ICIP), 2010, pp. 1605–1608.

T. Jabid, M. H. Kabir, and O. Chae, “Local directional pattern (LDP) – A robust image descriptor for object recognition,” in IEEE International Conference on Advanced Video and Signal Based Surveillance (AVSS), 2010, pp. 482–487.

M. H. Kabir, T. Jabid, and O. Chae, “A local directional pattern variance (LDPv) based face descriptor for human facial expression recognition,” in IEEE International Conference on Advanced Video and Signal Based Surveillance (AVSS), 2010, pp. 526–532.

T. Jabid, M. H. Kabir, and O. Chae, “Gender classification using local directional pattern (LDP),” in 20th International Conference on Pattern Recognition (ICPR), 2010, pp. 2162–2165.

T. Jabid, M. H. Kabir, and O. Chae, “Local Directional Pattern (LDP) for face recognition,” in International Conference on Consumer Electronics (ICCE), 2010, pp. 329–330.

M. H. Kabir, A. Al-Wadud, and O. Chae, “Brightness Preserving Image Contrast Enhancement Using Weighted Mixture of Global and Local Transformation Functions,” Int. Arab J. Inf. Technol., vol. 7, no. 4, pp. 403–410, 2010. (SCIE)

S. M. Didar-Al-Alam, Hasan Mahmud and Md. Abdul Mottalib, "Modifications in Proximity Based Access Control for Multiple User Support," International Journal of Engineering Science and Technology, vol. 2, no. 8, pp. 3603-3613, 2010.

Y.-G. Lee, Y.-K. Yoon, O.-S. Chae, and M. H. Kabir, “Method and apparatus for motion compensation,” EP Patent 20100156903, 2010.

Md Kamrul Hasan, Mohammad Kaykobad, Young-Koo Lee, Sungyoung Lee. A comprehensive Analysis of Degree Based Condition for Hamiltonian Cycles, Theoretical Computer Science 411(1):285-287 DOI: 10.1016/j.tcs.2009.09.018

Civil & Environmental Engineering

Rifaat, S. M., Tay, R., DeBarros, A. (2010). Effect of Street Pattern on Road Safety: Are Policy Recommendations Sensitive to Different Aggregations of Crashes by Severity? In Transportation Research Record: Journal of the Transportation Research Board, No. 2147, Transportation Research Board of the National Academies, Washington, D. C. pp. 58- 65. (Web of Science and SCOPUS Indexed)

Rifaat, S. M., Tay, R., De Barros, A. (2010). Effect of Neighborhood Street Pattern on Motorcycle Crash Severity at Calgary. Proceedings of the 45th Annual Conference of Canadian Transportation Research Forum, Toronto, Ontario, May 30- June 2, pp. 623- 637.

Rifaat, S. M., Tay, R., De Barros, A. (2010). Effect of Street Pattern on the Severity of Older Driver Involved Crashes: Are Policy Decisions Sensitive to Different Modeling Methodology? Paper accepted for Presentation and Publication in the 15th HKSTS International Conference, 11-14 December, 2010, Hong Kong. pp. 81-88.

Md. Rezaul Karim (2010). Quality and suitability of harvested rainwater for drinking in Bangladesh, Journal of Water Science and Technology: Water Supply-WSTWS, 10.3, pp. 359-366, IWA Publishing.

Md. Rezaul Karim (2010). Assessment of Rainwater Harvesting for Drinking Water Supply in Bangladesh, Journal of Water Science and Technology: Water Supply-WSTWS,10.2, pp. 243-249, IWA Publishing

Md. Rezaul Karim (2010). Microbial Contamination and Associated Health Burden of Rainwater Harvesting in Bangladesh, Journal of Water Science and Technology-WST, 61.8,pp. 2129-2135, IWA Publishing.

H. M. Shahin, T. Nakai, M. Kikumoto, H. Kyokawa, and Y. Miyahara (2010): Modeling of time-dependent behavior of clay in one-dimensional consolidation, Proc. of the 4th Sino-Japan Geotechnical Symposium, pp. 54-61, 2010.

T. Nakai, H. M. Shahin, M. Kikumoto & H. Kyokawa (2010): Simple modeling of time-dependent behavior of geomaterials, Proc. of NFCOMGEO-V, Australia, July, pp. 3-10.

H. M. Shahin, T. Nakai, M. Kikumoto & F. Zhang (2010): Bearing capacity of different types of foundations under several loading conditions, Proc. of NFCOMGEO-V, Australia, July, pp. 111-116.

H. Kyokawa, M. Kikumoto, T. Nakai & H. M. Shahin (2010): Simple modeling of unsaturated soil, Proc. of NFCOMGEO-V, Australia, July, pp. 131-138.

H. Kyokawa, M. Kikumoto, T. Nakai and H. M. Shahin (2010): Simple modeling of stress-strain relation for unsaturated soil, Geotechnical Special Publication of American Society of Civil Engineers (ASCE) on Experimental and Applied Modeling of Unsaturated Soils, June, vol. 202, pp. 17-25.

M. Suzuki, H. M. Shahin and T. Nakai (2010): Numerical Analysis on Ground Behavior for Construction of Displacement Pile, Geotechnical Special Publication of American Society of Civil Engineers (ASCE) on Deep Foundations and Geotechnical in Situ Testing, June, vol. 205, pp. 300-307.

H. M. Shahin, T. Nakai, M. Kikumoto, Y. Uetani and F. Zhang (2010): Interaction effect of retaining wall and existing foundations in braced excavation, Geotechnical Special Publication of American Society of Civil Engineers (ASCE) on Deep and Underground Excavation, June, vol. 206, pp. 92-99.

T. Nakai, H. M. Shahin, M. Kikumoto, H. Kyokawa and F. Zhang (2010): Unified method for describing various features of stress-strain behavior of geomaterials, Proc. of the Geoshanghai international conference, June, 2010, CD-ROM.

M. Kikumoto, T. Nakai, H. M. Shahin, A. Watanabe, K. Ishii and F. Zhang (2010): Mechanical behaviour of geosynthetic-reinforced soil retaining wall, Geotechnical Special Publication of American Society of Civil Engineers (ASCE) on Ground Improvement and Geosynthetics, June, vol. 207, pp. 310-317.

T. Nakai, H. M. Shahin, F. Zhang, M. Hinokio, M. Kikumoto, S. Yonaha, and A. Nishio (2010): Bearing capacity of reinforced foundation subjected to pull-out loading in 2D and 3D conditions, Geotextiles and Geomembranes, vol.28, issue3, pp.268-280, doi:10.1016/j.geotexmem.2009.09.013.

T. Konda, H. M. Shahin and T. Nakai (2010): Numerical Analysis for backside ground deformation behaviour due to braced excavation, Journal of Materials Science and Engineering, Vol. 10, doi:10.1088 /1757-899X/10/1/012010.

M. Kato?M. Kikumoto, T. Nakai?H. M. Shahin and Y. Uetani (2010): 2-dimensional model tests on reinforcing mechanism of braced wall by ground anchors, Proc. of the 22nd Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 129-134.

T. Iwata, K. Ishii?T. Nakai, H. M. Shahin and M. Kikumoto (2010): Deformation and failure mechanism of geosynthetic-reinforced retaining wall due to vertical loading on backfill soil – 2D model tests & numerical simulation, Proc. of the 22nd Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 141-146.

M. Kikumoto, H. Kyokawa, T. Nakai, and H. M. Shahin (2010): A simple elasto-plastic model for unsaturated soils and interpretations of collapse and compaction behaviours, Proc. of the 5th International Conf. on Unsaturated Soils (UNSAT 2010), Barcelona, Spain, Sept., pp.849-855.

M. Kikumoto, H. Kyokawa, T. Nakai, H. M. Shahin, K. Tatematsu and M. Koike (2010): Mechanical interpretation of compaction behavior by an elastoplastic model for unsaturated soils, Proc. of Bangladesh Geotechnical Conference 2010, Bangladesh, Nov., pp. 121-128.

H.M. Shahin, T. Nakai, M. Kikumoto, Y. Uetani and F. Zhang (2010): Interaction of retaining wall and existing structures in braced excavation, Proc. of Bangladesh Geotechnical Conference 2010, Bangladesh, Nov., pp. 203-210.

K. Ishii?T. Nakai?H. M. Shahin?M. Kikumoto and T. Iwata (2010): Deformation and failure behavior of backfill ground using geosynthetics reinforced wall, Proc. of the 18th Central Japan JSCE conference (CD-ROM), Japan, March.

T. Nakai?H. M. Shahin?M. Kikumoto?H. Kyokawa?Y. Miyahara?F. Zhang (2010): Formulation of time-dependent behavior in one-dimensional and three-dimensional constitutive models?Proc. of the 45th Japan national conference on geotechnical engineering, Ehime, Japan, August, pp.233-234.

A. Ban, H. Kyokawa, M. Kikumoto, T. Nakai and H.M. Shahin (2010): Rational modeling of stress-strain relation of temperature dependent behavior in geomaterials?Proc. of the 45th Japan national conference on geotechnical engineering, Ehime, Japan, August. pp.235-236.

U. Suzuki?M. Kikumoto?T. Nakai?H. M. Shahin?H. Kyokawa (2010): Rational modelling of the effect of particle crushing?Proc. of the 45th Japan national conference on geotechnical engineering, Ehime, Japan, August, pp.303-304.

K. Tatematsu?M. Koike?H. Kyokawa?M. Kikumoto?T. Nakai?H. M. Shahin (2010): Simulation of compression and soaking tests with an elasto-plastic model for?unsaturated soils?Proc. of the 45th Japan national conference on geotechnical engineering, Ehime, Japan, August. pp. 671-672.

H. Kyokawa?M. Kikumoto?T. Nakai?H. M. Shahin?K. Tatematsu?M. Koike (2010): A mechanical quality evaluation of a compacted soil using an elasto-platic constitutive model of unsaturated soil?Proc. of the 45th Japan national conference on geotechnical engineering, Ehime, Japan, August, pp.677-678.

M. Kikumoto?H. Kyokawa?T. Nakai?H. M. Shahin (2010): Mechanical interpretation of the compaction behaviour by an elastoplastic model for unsaturated soils?Proc. of the 45th Japan national conference on geotechnical engineering, Ehime, Japan, August, pp.701-702.?

Y. Miyahara?T. Nakai?H. M. Shahin?M. Kikumoto?H. Kyokawa (2010): Application of the one-dimensional model considering the influence of density, bonding and time effect to natural clay?Proc. of the 45th Japan national conference on geotechnical engineering, Ehime, Japan, August, pp.755-756.

R. Sakai?T. Nakai?H. M. Shahin?M. Kikumoto?Y. Yoshida?R. Nagatsu (2010): Investigation of reinforcing method of embankment ground using steel sheet pile - model tests and numerical analyses?Proc. of the 45th Japan national conference on geotechnical engineering, Ehime, Japan, August, pp.999-1000.

Y. Kimura?T. Nakai?F. Zhang?H. M. Shahin?M. Kikumoto?H. Hirase (2010): Bearing capacity mechanism of pile foundation and piled raft foundation- 2D?3D model test and numerical analysis?Proc. of the 45th Japan national conference on geotechnical engineering, Ehime, Japan, August, pp.1131-1132.

Y. Uetani, M. Kato?T. Nakai?H. M. Shahin?M. Kikumoto?F. Zhang (2010): Influence of braced excavation on existing foundation ( raft, pile, piled raft foundation) ?study of model experiment and analysis?Proc. of the 45th Japan national conference on geotechnical engineering, Ehime, Japan, August, 1265-1266.

K. Toda?T. Nakai?F. Zhang, H. M. Shahin?M. Kikumoto?Tsugiura (2010): Influence of tunnel excavation on upper existing orthogonal tunnel ?Model tests and numerical simulations?Proc. of the 45th Japan national conference on geotechnical engineering, Ehime, Japan, August, pp.1339-1340.

K. Ishii?H. M. Shahin?T. Nakai?M. Kikumoto?T. Iwata (2010): Bearing capacity of ground with geosynthetic-reinforced retaining wall ? effect of loading position?Proc. of the 45th Japan national conference on geotechnical engineering, Ehime, Japan, August, pp.1375-1376.

H. M. Shahin?K. Ishii?T. Nakai?M. Kikumoto?T. Iwata (2010): Bearing capacity of ground with geosynthetic-reinforced retaining wall – effect of wall stiffness and embedded depth?Proc. of the 45th Japan national conference on geotechnical engineering, Ehime, Japan, August, pp.1377-1378.

M. Koike?K. Tatematsu? H. Kyokawa?M. Kikumoto?T. Nakai?H. M. Shahin (2010): Unsaturated elastoplastic modeling based on modified tij an inundation collapse under anisotropic stress condition?Proc. of the 65th conference of the Japan Society of Civil Engineers (JSCE), Sapporo, Japan, September, (CD-ROM).

M. Kato?M. Kikumoto?T. Nakai?H. M. Shahin?Y. Uetani (2010): Mechanism of retaining wall support using ground anchor?Proc. of the 65th conference of the Japan Society of Civil Engineers (JSCE), Sapporo, Japan, September, (CD-ROM).

A. Ban?H. Kyokawa?M. Kikumoto?T. Nakai?H. M. Shahin (2010): Rational modeling of stress-strain relation considering thermal property of soil materials?Proc. of the 65th conference of the Japan Society of Civil Engineers (JSCE), Sapporo, Japan, September, (CD-ROM).

2009 (100)

Mechanical and Production Engineering

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris (2009), “Prediction of cutting forces in end milling of Medium Carbon steel by coupling the design of Experiment and response surface methodology” Vol. ME 40, No.2, December 2009, transaction of mechanical engineering division, IEB.

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris “Dynamic Modal Analysis of Vertical Machining Centre Components” Journal of advances in acoustic and vibrations, Volume 2009, article ID 508076, doi. 10.1155/2009/508076.

M. A. Habib and M. Rahman, "An evaluation of EDM electrodes by localized electrochemical deposition", 7th International Conference on Manufacturing Research (ICMR 09), 8-10 September 2009, University of Warwick, Coventry, UK.

Mahmud SL, Chowdhury NA, Patwari A U (2009) “An approach to relate and optimize metal forming process parameter by Fuzzy logic” AMSE periodical, Journal of modeling measurement and control-a general physics and electrical application, vol 82 issue page 80

Anayet U Patwari, AKM Nurul Amin, Waleed F Faris, “Artificial Neural Network chip serration frequency model in End Milling of Medium Carbon Steel” Research Journal of Applied Sciences, volume 4 Issue 3, page: 108-112, 2009, ISBN: 1815-332X, Medwell journal.

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris “Characterisation of dynamic behaviour of Vertical Machining Centre Components by finite element and experimental Modal Analysis” International journal of engineering systems modelling and simulations, Vol. 1, issue 4, pp. 231-241, Inder-science publications.

Anayet U Patwari, A.K.M. Nurul Amin, Waleed Faris, Sharulhazrin M.S, Hafizzudin I, “A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45), Volume 2182, page: 1812-1816, Lecture Notes in Engineering and Computer Science

Anayet U Patwari, AKM Nurul Amin, Waleed F Faris (2009) “Prediction of Chip Serration Frequency in End Milling Of Steel AISI1020 Using Response Surface Methodology’ TOME VII (2009), Volume1, Page: 89-96, International Journal of Engineering, Annals of Faculty of Engineering Hunedoara Romania, ISSN-1584-2665.

AA Bhuiyan, “Mixed Convection and Entropy Generation characteristics inside a porous cavity with viscous dissipation effect”, Paper no. IMECE2009-10883 pp. 533-542, doi: 10.1115/IMECE2009-10883 ASME International Mechanical Engineering Congress and Exposition (IMECE), Vol.9: Heat Transfer, Fluid Flows, and Thermal Systems, Parts A, B and C, ISBN: 978-0-7918-4382-6, December 2009, Florida, USA.

Rahman, M., H., Kim. S. I, and Hassan, I., “Effect of Inlet Temperature on Blade Tip Leakage Flow and Shroud Heat Transfer” published in the proceedings of ASME Turbo Expo 2009, June 8-12, Orlando, Florida, USA.

Electrical and Electronic Engineering

Nafiz Imtiaz Bin Hamid, "Role of IUT in Developing Socioeconomic Status of the OIC Member states”- in THE GUARDIAN- A National Monthly. August, 2009.

Golam Sarowar, M.A. Naser,S.M. Nizamuddin, Nafiz I. B. Hamid and Adnan Mahmud, "Enhancing Bengali character recognition process applying heuristics on Neural Network"- International Journal of Computer Science and Network Security, ISSN: 1738-7906. VOL.9 No.6; July 2009. Pp.154-158.

Mohammad Kawser, Nafiz Imtiaz Bin Hamid, M.A.Naser and Adnan Mahmud, "An Optimized Method for Scheduling of Scanning for Handover in Mobile WiMAX"- International Conference on Computer and Network Technology (ICCNT 2009). July, 2009 in Chennai, India. Published by World Scientific Press (WSP), Indexed by Ei Compendex and Thompson ISI, ISBN: 978-9-8142- 8967-2.This paper won an award in this conference.

M.A. Naser, Nafiz I. B. Hamid and M.A.Hoque, "Projection based feature extraction process for Bangla script: A modified approach"- International Conference on Software Technology and Engineering (ICSTE 2009). July, 2009 in Chennai, India. Published by World Scientific Press (WSP), Indexed by Ei Compendex and Thompson ISI,ISBN: 978-9-8142-8724-1.

Nafiz Imtiaz Bin Hamid, Adnan Mahmud, "Optimizing the Handover Procedure in IEEE 802.16e Mobile WiMAX Network"-3rd National Conference on Communication and Information Security (NCCIS 2009), Dhaka, Bangladesh. pp.24-29.

M.A. Naser, Nafiz I. B. Hamid and M. A. Hoque, “Projection Based Feature Extraction Process for Bangla Script: A Modified Approach” Proceedings of the 2009 International Conference on Software Technology and Engineering, India pp. 210-214

Technical and Vocational Education

Al Mamun, M. A., & Tapan, S. M. (2009). Using ICT in teaching-learning at the polytechnic institutes of Bangladesh: Constraints and limitations. Teacher’s World-Journal of Education and Research, 33(1), 207–217.

Islamic Education in the period of Prophet (SM) and Calipha Ar-Rashida, Journal of Dr. Sirajul Haque Islamic Research Centre, Vol No-1, 2009

Computer Science and Engineering

Md Kamrul Hasan, Anh Pham Ngoc, Young-Koo Lee, Sungyoung Lee. Preference Learning on an OSGi Based Home Gateway. IEEE Transactions on Consumer Electronics 55(3):1322 - 1329 DOI: 10.1109/TCE.2009.5277995

Md Kamrul Hasan, Lenin Mehedy, Salim Zabir,Sungyoung Lee, Young-Koo Lee. A Middleware Based Network Hot Swapping Solution for SCA Compliant Radio. IEEE Transactions on Consumer Electronics 55(3):1315 - 1321, DOI: 10.1109/TCE.2009.5277994

Abu Raihan Mostofa Kamal, M. Aminul Islam, Md. Khaled-Ur-Rahman and Md. Zubairul Islam.Performance Enhancement in Media Access Control (MAC) layer protocol on Wireless Sensor Network. IUT Journal of Engineering and Technology, 2009, Vol. 7, No. 2, Pages 23-36.

Hamid, M.A., Alam, M.M., Islam, M.S., Hong, C., & Lee, S. (2010). Fair data collection in wireless sensor networks: analysis and protocol. annals of telecommunications - annales des télécommunications, 65, 433-446.

Civil & Environmental Engineering

Rifaat, S.M., Tay, R (2009). Effect of Street Pattern on Injury Risks in Two-Vehicle Crashes. In Transportation Research Record: Journal of the Transportation Research Board, No. 2102, Transportation Research Board of the National Academies, Washington, D. C., pp. 61-67. (Web of Science and SCOPUS Indexed)

S.N. Ahammad, Q.H. Bari and M. R. Karim (2009). Scenario of Solid Waste Management Program of Selected Municipalities in Bangladesh, proceedings of the International Conference on Solid Waste Management, Technical, Environmental and Socio-economical Contexts (WasteSafe 2009), 9-10 November, 2009, Vol-I, pp. 85-91.

M. R. Karim, M.M. Rahman, M.M. Hasan and Masahiko Sekine (2009). Water Supply and Sanitation Situation of Slums in Khulna City, Bangladesh, proceedings of IWA-ASPIRE 2009, CD-ROM, 18-22 October, 2009 at Taipei, Taiwan.

Md. Rezaul Karim, Megumi Kuraoka, Takaya Higuchi, Masahiko Sekine and Tsuyoshi Imai (2009). Assessment of Heavy Metal and its Leachability from the Municipal Solid Wastes Dumping Sites in Bangladesh, proceedings of the 11th Summer Symposium of JSCE, pp. 285-288, 11 September, 2009 at Tokyo Institute of Technology, Japan

Rifaat, S. M., Tay, R., Perez, A., De Barros, A. (2009). Effects of Neighborhood Street Patterns on Traffic Collision Frequency. Journal of Transportation Safety and Security, Vol. 1, Issue 4, pp. 241- 253. (SCOPUS Indexed)

Rifaat, S. M., Tay, R. (2009). Effect of Street Pattern on Single Vehicle Crash Severity. Proceedings of the 44th Annual Conference of Canadian Transportation Research Forum, Victoria, British Columbia, May 24- 27, pp. 180- 193.

Md. Rezaul Karim and Gazi Mohammad Mohsin (2009): Assessment of Urban Water Supply Situation: A Case Study in Khulna City Corporation Area, proceedings of the 2nd ICWFW 2009, pp. 235-242, 15-17 March, 2009, BUET, Dhaka, Bangladesh.

Tay, R., Rifaat, S.M., Chin, H.C. (2008). A Logistic Model of the Effects of Roadway, Environmental, Vehicle, Crash and Driver Characteristics on Hit-and-Run Crashes. Accident Analysis and Prevention, Vol. 40, Issue 4, pp.1330-1336. (Web of Science and SCOPUS Indexed)

Md. Rezaul Karim and Gazi Mohammad Mohsin (2009). Urban Water Supply and Associated Health Burden: A Case Study in Khulna City in Bangladesh, proceedings of the EWRI’s 2nd Developing Nations Conference: An International Perspective on Environmental and Water Resources, CD-ROM, 5-7 January, AIT, Bangkok, Thailand.

T. Nakai, H. Kyokawa, M. Kikumoto, H.M. Shahin & F. Zhang (2009): Elastoplastic modeling of geomaterials considering the influence of density and bonding, Proc. of the international symposium on Prediction and Simulation Methods for Geo-hazard Mitigation, Kyoto, Japan, pp. 367-373.

H. M. Shahin, T. Nakai, F. Zhang, M. Kikumoto & M. Nagata (2009): Behaviors of ground due to tunnel excavation, Proc. of the 14th Conference on Computational Engineering and Science - JSCES, Tokyo, Japan, May, pp. 441-444.

H. Kyokawa, M. Kikumoto, T. Nakai, & H.M. Shahin (2009): One dimensional elastoplastic constitutive model for unsaturated soil, Proc. of the 21st Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 1-8.

M. Kikumoto, H. Kyokawa, T. Nakai, & H.M. Shahin (2009): One dimensional elastoplastic constitutive model of soil considering the temperature of soil, Proc. of the 21st Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 9-16.

H.M. Shahin, T. Nakai, M. Kikumoto1, H. Kyokawa & Y. Miyahara (2009): One dimensional simulation of time-dependent behavior of clay, Proc. of the 21st Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 31-36.

H. Kyokawa, M. Kikumoto, T. Nakai & H.M. Shahin: An elasto-plastic constitutive model for unsaturated soil considering the relation between suction, degree of saturation and density, Journal of Applied Mechanics JSCE, August, vol.12, pp. 331-342, 2009.

T. Nakai, H.M. Shahin, M. Kikumoto, H. Kyokawa & F. Zhang: Simple and unified method for describing various characteristics of geomaterials -Influence of density, bonding, time effects and others-, Journal of Applied Mechanics JSCE, August, vol.12, pp. 371-382, 2009.

T. Konda, H.M. Shahin & T. Nakai (2009): Elastoplastic finite element analysis for the deformation behavior of ground due to braced excavation, Journal of Japan Society of Civil Engineers, September, vol.65, no.1, pp. 213-225.

T. Nakai, H. M. Shahin, A. Watanabe & S. Yonaha (2009): Reinforcing mechanism of Geosynthetics on bearing capacity problems – model tests and numerical simulations, Proc. of the 17th International Conference on Soil Mechanics and Geotechnical Engineering (ICSMGE), Alexandria, Egypt, October, pp. 917-920.

H. M. Shahin, E. Nakahara & M. Nagata (2009): Behaviors of ground and existing structures due to circular tunneling, Proc. of the 17th International Conference on Soil Mechanics and Geotechnical Engineering (ICSMGE), Alexandria, Egypt, October, pp. 1786-1789.

K. Ishii?M. Kikumoto?H. M. Shahin?T. Nakai and A. Watanabe (2009): Deformation and failure mechanism of reinforced retaining wall subjected to vertical loading, Geosynthetics Engineering Journal, Vol. 24?pp.243-250.

M. Kikumoto?H. M. Shahin?T. Nakai, M. Nagata and K. Toda (2009): Influences of tunnel excavation on the neighboring group-pile foundation, Proc. of the 54th Geotechnical Symposium (JGS), Vol.54, pp.355-362.

Y. Uetani, T. Nakai, F. Zhang, H. M. Shahin & M. Kikumoto (2009): Influence of braced excavation on existing nearby structure: 2D model tests?Proc. of the 17th Central Japan JSCE conference (CD-ROM), Japan, March.

T. Kijima, T. Nakai, F. Zhang, H. M. Shahin, B. Shintaro, I. Fumio and others?(2009): New control system for landslide of large-scale slope-cutting, Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 105-106.

T. Nakai, H. M. Shahin, M. Kikumoto, H. Kyokawa and F. Zhang (2009): Rational modeling method to describe various characteristics in geomaterials, Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 231-232.

H. M. Shahin, T. Nakai, M. Kikumoto and H. Kyokawa (2009): Rational modeling of time-dependent behavior in geomaterials, Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 233-234.

T. Nakai, H. M. Shahin, F. Zhang, A. Watanabe and K. Ishii (2009): Reinforcing mechanism of reinforced soil retaining wall with geosynthetics – Model tests and numerical analysis, Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 469-470.

K. Tatsuo, T. Nakai, F. Zhang, H. M. Shahin, B. Shintaro, I. Fumio and others?(2009): Conventional triaxial tests on undisturbed soil sampled from potential landslide ground and its element simulation, Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 517-518.

B. Shintaro, I. Fumio, T. Nakai, F. Zhang, H. M. Shahin and others?(2009): Conventional triaxial tests on undisturbed soil sampled from potential landslide ground and its element simulation, Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 519-520.

H. Kyokawa, M. Kikumoto, T. Nakai and H. M. Shahin (2009): Rational modeling of stress-strain relation of unsaturated soil, Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 649-650.

T. Nakai, F. Zhang, H. M. Shahin, B. Shintaro, I. Fumio and others?(2009): Observational construction using movement observation and elastoplastic FEM on the large scale cut slope(1), Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 801-802.

T. Nakai, F. Zhang, H. M. Shahin, B. Shintaro, I. Fumio and others?(2009): Observational construction using movement observation and elastoplastic FEM on the large scale cut slope(2), Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 803-804.

Y. Miyahara, T. Nakai, H. M. Shahin, M. Kikumoto, E. Sawada and H. Kyokawa (2009): One-dimensional consolidation on clay with different density, bonding and time effect, Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 869-870.

T. Konda, H. M. Shahin and T. Nakai (2009): Numerical Analysis for Backside Ground Surface Settlement of Braced Wall Considering the Deference of Ground Character, Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 1039-1040.

Y. Uetani, N. Kanehara, T. Nakai, H. M. Shahin, M. Kikumoto and F. Zhang (2009): Influence of braced excavation on existing pile foundation, Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 1057-1058.

Y. Kimura, T. Nakai, F. Zhang, H. M. Shahin, M. Kikumoto and H. Oyama (2009): Bearing capacity and deformation mechanism of group pile foundation under various loading conditions, Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 1115-1116.

K. Toda, T. Nakai, F. Zhang, H. M. Shahin, M. Kikumoto, M. Nagata and S. Nakazawa (2009): Reinforcement mechanism of rock bolts on a semicircular tunnel, Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 1279-1280.

M. Nagata, T. Nakai, F. Zhang, H. M. Shahin, M. Kikumoto, K. Toda and S. Nakazawa (2009): Influence of two-dimensional circular tunneling on adjacent pile foundation, Proc. of the 44th Japan national conference on geotechnical engineering, Yokohama, Japan, August, pp. 1281-1282.

H. Kyokawa?M. Kikumoto?T. Nakai & H.M. Shahin: Constitutive modeling of soil materials considering temperature change, Proc. of the 64th conference of the Japan Society of Civil Engineers (JSCE), Fukuoka, Japan, September, (CD-ROM).

Y. Miyahara, T. Nakai, H.M. Shahin, M. Kikumoto & H. Kyokawa (2009): 1D consolidation properties of clay having different densities, bonding and creep properties, Proc. of the 64th conference of the Japan Society of Civil Engineers (JSCE), Fukuoka, Japan, September, (CD-ROM).

2008 (73)

Mechanical and Production Engineering

Anayet U Patwari, A.K.M Nurul Amin, Turnad L. Ginta, M.A. Lajis, “Prediction of Surface Roughness in End milling of preheated Ti6Al4V alloy using coupled Artificial Neural Network and Response surface methodology”, Proceedings of 4th International conference of Thermal Engineering, paper ID: 023, organized by ASME-BSME, 27-29 December 2008, Dhaka, Bangladesh

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris, S. Alam; “Investigations of the causes of chatter in Computer aided manufacturing process during end milling operation”-Proceedings to third international conference on Mechatronics 2008, page 416-421, organized by Faculty of Engineering, International Islamic university of Malaysia, 18-20 December 2008.

M.H Ishtiyaq, AKM Nurul Amin, Anayet U Patwari, A. Karim, “Enhancement of Machinability by work piece preheating in end milling of Ti–6Al–4V”, Journal of Achievements in Materials and manufacturing engineering, volume 31 issue 2, page: 320-326, December 2008.

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris, S Alam, “Development of an Artificial Neural Network model for the Prediction of the chip serration frequency in End Milling of Medium Carbon Steel”- Proceedings International conference of Curtin university of Science and Technology engineering (CUTSE 2008), Curtin university of Technology, Sarawak, Malaysia, 24-27th November 2008.

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris “Response Surface methodological approach for the prediction of tangential Cutting Forces in End Milling of Stainless Steel”, Journal of Engineering, TOME VI (2008), Volume 3, Page: 171-178, Annals of Faculty of Engineering Hunedoara Romania 2008. ISSN-1584-2673.

M. A. Habib, S. W. Gan and M. Rahman, "Fabrication of Complex Shape Electrodes by Localized Electrochemical Deposition", 8th Asia-Pacific Conference on Materials Processing (APCMP), 15-20 June 2008, Guilin - Guangzhou, China.

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris, M.H Ishtiyaq Mathematical model of chip serration frequency in end milling of Inconel 718- Proceedings of ICME 2008, 21-23 May 2008, Johor Baru, paper ID 94, Malaysia

M.H Ishtiyaq, AKM Nurul Amin, Anayet U. Patwari, “Development of an artificial neural network algorithm for predicting the cutting forces in end milling of Inconel 718”-paper ID: 89, Proceedings of ICME 2008, 21-23 May 2008, Johor Bharu, Malaysia

Anayet U. Patwari, AKM Nurul Amin, S Alam, “Improvement of Surface roughness in end milling of Ti6Al4V by coupling RSM with genetic Algorithm” Journal of Advances in Materials processing technology, page 1154-1159, Advance Materials Research, volume: 264-265, transtech publications.

N. A Chowdhury & Anayet U. Patwari, “Development of a mathematical model for Elastic Field simulation during unloading condition in Surface Burnishing Processes”, Journal of Engineering, TOME VI (2008), Page: 55-64, Annals of Faculty of Engineering Hunedoara Romania 2008.

Arafat A. Bhuiyan, AKMS Islam, Wind Resource Assessment at Engineering Staff College, Meghnaghat, Journals of the Institutions of Engineers (JIEB), vol. Multidisciplinary: p. 90-97, 2008.

Barna, S.F. AA Bhuiyan, “Effect of Aspect ratio on Entropy generation in a microstructure filled vented cavity”, Vol. II, pp-634-640,4th BSME-ASME International Conference on Thermal Engineering,27-29 December, 2008.

AA Bhuiyan, “Effect of Inlet to Cavity Width ratio on mixed Convection in a microstructure filled vented cavity”, Vol. I, pp-48-55,4th BSME-ASME International Conference on Thermal Engineering, 27-29 December, 2008.

AA Bhuiyan, “Numerical Analysis on mixed Convection through an adiabatic enclosure filled with fluid saturated porous medium”, Vol. II, pp-641-647,4th BSME-ASME International Conference on Thermal Engineering, 27-29 December,2008.

AA Bhuiyan, “A Statistical analysis of Wind data at Engineering Staff College, Meghnaghat”, Vol. I, pp-2432-2437, World Renewable Energy Congress (WRECX), August, 2008.

Rahman, M., H., Hassan, I., and Kim. S. I, “Numerical Investigation of Shroud Heat Transfer in an Axial Flow Turbine: Steady State Analysis” published in the proceedings of ASME 2008 Summer Heat Transfer Conference, August 10-14, 2008 in Jacksonville, Florida, USA.

Electrical and Electronic Engineering

Nafiz Imtiaz, Anwarul Azim, Rishad Ahmed Shafik, Muhammad, "A Novel Approach of Implementing an FFT Algorithm on OFDM System", IEEE Conference on Wireless Communications, Networking and Mobile Computing (WICOM) 21-25 Sept. 2007 I Shanghai, China

M.S. Hossain, M.Z. Hossain and M.A. Hoque, “AFLC Based Flux Weakening Speed Control for IPMSM Drive with Variable Direct and Quadrature Axis Inductances”, Journal of Electronics and Computer Science, ISSN 1680-6743, Vol. 9, June 2008, pp.37-44.

Kabir Ahmed, Md. Shirajum Munir, A.S.M Shihavuddin, M.A. Hoque and K.K. Islam, “Towards Autonomous Robot Operation: Path Map Generation of an Unknown Area by a New Trapezoidal Approximation Method Using a Self Guided Vehicle and Shortest Path Calculation by a Proposed SRS Algorithm” Published as Lecture Notes on Artificial Intelligence (LNAI) published by Springer publication (T.-B. Ho and Z.-H. Zhou (Eds.): PRICAI 2008, LNAI 5351, pp. 593–602, 2008. page 593-602

M.Z. Hossain. M.S. Hossain, M.N. Akhtar and M.A. Hoque “A Novel Fuzzy Logic Based Speed Control for IPMSM Drive with Variable Direct and Quadrature Axis Inductances”, International Journal of Systems Simulation, Hong Kong, Vol. 2, No.1 (2008), pp. 39-48.

Leghari, F. ; Ahmad, J. ; Sarker, M.M.H. ; Hoque, M.A. ; Islam, K.K. Publication Year: 2008 , Page(s): 239 - 242 “Towards a Model of a Multi-Mobile Root System”, 12th IEEE International Multi-topic Conference , Pakistan pp.239-242. Dec.2008.

Technical and Vocational Education

Tapan, S.M., Khan, M. S. H. (2008). The integration of ICT and pedagogy for improving teacher education: the case of Bangladesh. Paper presented at the International Conference on ICT in Teaching and Learning 2008 held at The Open University of Hong Kong, Hong Kong, 07-08 July, 2008.

Computer Science and Engineering

Rasib Hassan Khan , K. M. Imtiaz-ud-Din , Abdullah Ali Faruq , Abu Raihan Mostofa Kamal, M. Abdul Mottalib. Security Adaptive Protocol Suite: Ranked Neighbor Dis- covery (RND) and Security Adaptive AODV(SA-AODV). 5th International Conference on Electrical and Computer Engineering (ICECE 2008), BUET, Bangladesh. December 22-24, 2008.

A.K.M. Rasheduzzaman, M. Asikur Rahman, Daud M Jamilur Rahman and Abu Raihan Mostofa Kamal. Density-based Clustering Technique for efficient Data Mining. 11th International Conference on Computer and Information Technology (ICCIT 2008). KUET, Bangladesh. December 25-27, 2008.

Md.Shariful Islam, Abu Raihan Mostofa Kamal, Mahfuz Hasan and Dr.Hafiz Md. Hasan Babu, An approach towards efficient Key Management in Mobile Ad Hoc Network, Dhaka University Journal of Science (ISSN 1022-2502), July 2008. Vol.56, No. 2, Pages 129-132 .

R. H. Khan, A. Ahsan, M. Haque, A. F. M. S. Kabir and S. Hossen, "MC-CDMA: An Alternative Multiple Access Technique in 3G Wireless Architecture," 2008 International Conference on Complex, Intelligent and Software Intensive Systems, Barcelona, Spain, 2008, pp. 573-578, doi: 10.1109/CISIS.2008.88.

Abu Raihan Mostofa Kamal, Lutful Karim, Hafiz Md. Hasan Babu and Md. Shariful Islam, An Adaptive Secure Routing in Mobile Ad Hoc Networks, Dhaka University Journal of Science (ISSN 1022-2502), January 2008. Vol.56, No. 1, Pages 9-15 .

Civil & Environmental Engineering

Rifaat, S.M., Tay, R. (2008). Effects of Road, Land use, Socio-economic and Demographic Characteristics on Community Road Crashes. Proceedings of Canadian Institute of Transportation Engineers Conference, Victoria, BC, April 27-30.

Rifaat, S.M., Tay, R. (2008). Grid or Limited Access Roads: Effects of Street Pattern on Road Crashes. Proceedings of 43nd Annual Conference of Canadian Transportation Research Forum, Fredericton, NB, June 1-4, pp. 404-417.

H. M. Shahin, T. Nakai, F. Zhang, M. Kikumoto, Y. Tabata & E. Nakahara (2008): Ground movement and earth pressure due to circular tunneling: model tests and numerical simulations, Proc. of the 6th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, Shanghai, China, April, pp. 709-715.

N. Iwata, H.M. Shahin, F. Zhang, T. Nakai, M. Niinomi & Y.D.S. Geraldni (2008): Excavation with stepped-twin retaining wall: model tests and numerical simulations, Proc. of the 6th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, Shanghai, China, April, pp.655-661.

T. Nakai, F. Zhang, H. Kyokawa, M. Kikumoto & H.M. Shahin (2008): Modelling the influence of density and bonding on geomaterials, 2nd International Symposium on Geotechnics of Soft Soils, Glasgow, Scotland, September, pp. 65-76.

M. Kikumoto, T. Nakai, H. Kyokawa, F. Zhang & H.M. Shahin (2008): A unified method to describe the influence of intermediate principal stress and stress history in constitutive modelling, 2nd International Symposium on Geotechnics of Soft Soils, Glasgow, Scotland, September, pp. 151-157.

T. Nakai, H. Kyokawa, M. Kikumoto, H. M. Shahin & F. Zhang (2008): One-dimensional and three-dimensional descriptions of elastoplastic behavior in structured clays, Proc. of the 4th IWS on New Frontiers in Computational Geotechnics, Pittsburgh, October, pp. 3-12.

H. M. Shahin, T. Nakai, F. Zhang, M. Kikumoto, E. Nakahara & M. Nagata (2008): Interaction effects between existing foundations and tunneling- model tests and numerical simulations, Proc. of the 4th IWS on New Frontiers in Computational Geotechnics, Pittsburgh, October, pp. 119-126.

T. Nakai, F. Zhang, H. M. Shahin and Y. Kimura (2008): Model test and analysis of group pile foundation under various loads, Proc. of the 43rd Japan national conference on geotechnical engineering, Hiroshima, Japan, July, pp. 1175-1176.

Y. Uetani, Y. S. Geraldini, Y. Suzuki, T. Nakai, F. Zhang, M. Kikumoto and H. M. Shahin (2008): Experiments and their numerical analyses on active and passive earth pressure, Proc. of the 43rd Japan national conference on geotechnical engineering, Hiroshima, Japan, July, pp. 1395-1396.

T. Konda, H. M. Shahin, T. Nakai and H. Kyokawa (2008): Finite Element Analysis with Elasto-plastic model for the Soft Clayey Ground in Cut and Cover Construction Site, Proc. of the 43rd Japan national conference on geotechnical engineering, Hiroshima, Japan, July, pp. 1409-1410.

F. Zhang, T. Nakai, H. M. Shahin, M. Kikumoto, Y. Uetani, Y. S. Geraldini and Y. Suzuki (2008): Influence of existing structure on ground and retaining wall in braced excavation: numerical simulation, Proc. of the 43rd Japan national conference on geotechnical engineering, Hiroshima, Japan, July, pp. 1413-1414.

H. M. Shahin, T. Nakai, F. Zhang, M. Kikumoto, E. Nakahara, M. Nagata and K. Toda (2008): Effect of adjacent piled raft on deformation and stress of ground during 2D circular tunneling: numerical simulation, Proc. of the 43rd Japan national conference on geotechnical engineering, Hiroshima, Japan, July, pp. 1435-1436.

E. Nakahara, T. Nakai, F. Zhang, H. M. Shahin, M. Kikumoto, M. Nagata and K. Toda (2008): Effect of adjacent piled raft on deformation and stress of ground during 2D circular tunneling: model tests, Proc. of the 43rd Japan national conference on geotechnical engineering, Hiroshima, Japan, July, pp. 1437-1438.

M. Nagata, T. Nakai, F. Zhang, H. M. Shahin, M. Kikumoto & K. Toda (2008): 2D model tests and simulations on tunnel excavation having various existing foundations?Proc. of the 64th conference of the Japan Society of Civil Engineers (JSCE), Fukuoka, Japan, September, (CD-ROM).

2007 (51)

Mechanical and Production Engineering

N. A Chowdhury & Anayet U. Patwari “Surface quality improvement of a machined surface using a newly designed cylindrical Surface rolling tool”- Journal of The Institute of Engineers, Bangladesh, Multidisciplinary, Vol Mul-dis 32 No. 1 December-2007.

Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris, M.H Ishtiyaq Numerical analysis and verification of chip serration frequency model by coupled response surface methodology and genetic algorithm- proceedings of International conference on Metals Processing and Manufacturing Conference, 19-22 November 2007, Cairo, Egypt

M. A. Habib, S. W. Gan, H. S. Lim and M. Rahman, "Fabrication of EDM Electrode by Localized Electrochemical Deposition", 2nd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN), 6-9 November 2007, Gwangju, Korea.

N. A Chowdhury, Anayet U. Patwari & Farid Uddin “Development of a multi criteria and parameter Optimization tool for the Cutting Conditions for Turning process”, Volume: 2(2007), No:1, page 75-83, Journal of Mechanical and Materials Engineering, Faculty of Engineering, University of Malaya, Malaysia 2007.

Mahmud S.L N. A Chowdhury & Anayet U. Patwari, “Optimization of blank holding force in deep drawing processes by Fuzzy Logic." Journal of Engineering and Technology Vol.6 No.1, pp 29-39, Issue: January-June 2007.

Electrical and Electronic Engineering

M.J. Hossain, M.A. Hoque, M.M. Ali, K.K. Islam and M.A. Rahman, “Simplified Fuzzy Logic Based Algorithm for Flux Weakening Speed Control of IPMSM Drive”, International Journal of Systems Simulation, Hong Kong, Vol. 1, No.1 (2007), pp. 77-93.

Md. Selim Hossain, Md. Jahangir Hossain, M. Ashraful Hoque, “A Novel Fuzzy Based Flux Weakening Speed Control for IPMSM Drive with Variable Direct and Quadrature Inductances”. Proceedings in the International Conference of ICCIT, UIU, Dhaka, December 28-29, 2007.

Technical and Vocational Education

Raihan, M.A., Hossain, M. R., & Mondal, O. (2007). ICT for Poverty Alleviation Involving Young Professionals and Students, International Journal of Engineering and Technology (IJET), ISSN: 1812-7711, vol. 4, Issue. 3, pp. 143-148.

Tapan, S.M., Raihan, M.A., Ahmed. S., & Aktarruzzaman, M. (December, 2007). Introduction to e-Learning. An International Workshop on ICT in Teaching-Learning in Technical and Vocational Education, Organized by TVE Department, IUT, Dec. 01- 05.(International Workshop)

Tapan, S.M., Raihan, M.A., Ahmed. S., & Aktarruzzaman, M. (December, 2007). ICT in Teaching-Learning. An International Workshop on ICT in Teaching-Learning in Technical and Vocational Education,Organized by TVE Department, IUT, Dec. 01-05.(International Workshop)

Tapan, S.M., Raihan, M.A., Ahmed, S. & Aktarruzzaman, M. (December, 2007). ICT and Distance Education. An International Workshop on ICT in Teaching-Learning in Technical and Vocational Education. Organized by TVE Department, IUT, Dec. 01-05. (International Workshop)

Tapan, S.M. & Raihan, M.A. (February, 2007). Qualities of a Good Teacher. An Orientation Programme of IUT Teachers on an Effective Teaching-Learning, Organized by TVE Department, IUT, Feb. 19-20. (Orientation Program for the Newly recruited Teachers)

Ahmed, S. & Raihan, M.A. (February, 2007). Planning a Lesson, An Orientation Programme of IUT Teachers on an Effective Teaching-Learning, Islamic University of Technology (IUT), Feb. 19-20. (Orientation Program for the Newly recruited Teachers)

Raihan, M.A., Hossain, M. R., & Mondal, O. (2007). ICT for Poverty Alleviation Involving Young Professionals and Students, International Journal of Engineering and Technology (IJET), ISSN: 1812-7711, vol. 4, Issue. 3, pp. 143-148.

Computer Science and Engineering

Lenin Mehedy, Md Kamrul Hasan, Mohammad Kaykobad. An improved degree based condition for Hamiltonian cycles. Information Processing Letters 102(2):108-112 DOI: 10.1016/j.ipl.2006.11.013

M. A.-A. Wadud, M. H. Kabir, M. A. A. Dewan and O. Chae, “A Dynamic Histogram Equalization for Image Contrast Enhancement”, IEEE Transactions on Consumer Electronics, Vol. 53, No. 2, pp. 593–600, 2007. [SCI]

Civil & Environmental Engineering

Rifaat, S.M., Tay, R., Chin, H.C. (2007). Severity of Two-Vehicle Crashes in Singapore. Proceedings of 42nd Annual Conference of Canadian Transportation Research Forum, Winnipeg, Manitoba, June 3-6, pp. 277-290.

Rifaat, S.M., Chin, H.C. (2007). Accident Severity Analysis Using Ordered Probit Model. Journal of Advanced Transportation, Vol. 41, No.1, pp. 91-114. (Web of Science and SCOPUS Indexed)

Tay, R., Rifaat, S.M. (2007). Factors Contributing to the Severity of Intersection Crashes. Journal of Advanced Transportation, Vol. 41, No.3, pp.245-265. (Web of Science and SCOPUS Indexed)

D. Muramatsu, F. Zhang & H. M. Shahin (2007): Numerical simulation on bearing capacity of soil-bag reinforced ground considering finite deformation, Geotechnical Journal, vol. 2, no.1, pp. 11-23.

T. Nakai, F. Zhang, M. Kikumoto, H. M. Shahin, H. Takei, M. Ninomi & N. Iwata (2007): Influence of existing load on excavation problems- model tests and numerical simulation, Proceedings of the 10th Int. Symposium on Numerical Models in Geomechanics, NUMOG X, Rhodes, Greece, April, pp. 611-617.

H. M. Shahin, T. Nakai, F. Zhang, M. Kikumoto, Y. Tabata and E. Nakahara. (2007): Model tests and numerical simulations on shallow circular tunneling, Proc. of the 19th Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 131-138.

T. Nakai, F. Zhang, H. M. Shahin & M. Kikumoto (2007): Behavior of ground in excavation problems: model tests and numerical simulations, Proceedings of the 3rd Sino-Japan Geotechnical Symposium – New Frontiers in Chinese and Japanese Geotechniques, Chongqing, China, November, pp. 3-20.

T. Nakai, F. Zhang, M. Hinokio, H. M. Shahin, M. Kikumoto, S. Yonaha & A. Nishio (2007): Bearing capacity of reinforced foundation subjected to pull-out loading: 3D model tests and numerical simulation, Proceedings of the 5th Int. Conference on Earth Reinforcement – New Horizon in Earth Reinforcement, IS-Kyushu’07, Fukuoka, Japan, November, pp. 457-463.

D. Muramatsu, F. Zhang and H. M. Shahin (2007): Numerical simulation on bearing capacity of soilbag-reinforced ground considering finite deformation, Proceedings of the 5th Int. Conference on Earth Reinforcement – New Horizon in Earth Reinforcement, IS-Kyushu’07, Fukuoka, Japan, November, pp. 465-471.

T. Nakai, H. M. Shahin, N. Iwata, M. Niinomi and H. Takei (2007): Influence of deflection process and mode of wall and existing building load on retaining wall, 13th Asian Reg. Conf. on Soil Mech. and Geotechnical Engineering, Kolkata, India, December, pp. 481-484.

H. M. Shahin, M. Kikumoto, E. Sung, M. Yamamoto and Y. Tabata (2007): 3D model tests and numerical simulation in shallow tunneling considering existing piled raft, 13th Asian Reg. Conf. on Soil Mech. and Geotechnical Engineering, Kolkata, India, December, pp. 522-525.

R. Nagatsu, T. Nakai, F. Zhang, H. M. Shahin, and. R. Ito (2007): Bearing capacity of different types of foundation under various loads, Proc. of the 42nd Japan national conference on geotechnical engineering, Nagoya, Japan, July, pp. 1183-1184.

N. Kenji, F. Zhang, T. Nakai, H. M. Shahin, and. M. Hayashi (2007): Analysis on deformation performance of cantilever retaining wall, Proc. of the 42nd Japan national conference on geotechnical engineering, Nagoya, Japan, July, pp. 1423-1424.

E. Nakahara, T. Nakai, F. Zhang, H. M. Shahin, Y. Tabata and. M. Nagata (2007): Deformation and stress of ground during 2D circular tunneling: model tests, Proc. of the 42nd Japan national conference on geotechnical engineering, Nagoya, Japan, July, pp. 1497-1498.

Y. Tabata, T. Nakai, F. Zhang, H. M. Shahin, E. Nakahara and. M. Nagata (2007): Deformation and stress of ground during 2D circular tunneling: numerical simulations, Proc. of the 42nd Japan national conference on geotechnical engineering, Nagoya, Japan, July, pp. 1499-1500.

H. M. Shahin, T. Nakai, F. Zhang, Y. Tabata and E. Nakahara. (2007): Deformation and stress of ground during 2D circular tunneling: effect of adjacent structure, Proc. of the 42nd Japan national conference on geotechnical engineering, Nagoya, Japan, July, pp. 1501-1502.

H. M. Shahin, T. Nakai, F. Zhang, Y. Tabata and E. Nakahara (2007): Behavior of piled raft during 2D trap door tunnel excavation, Proc. of the 62nd conference of the Japan Society of Civil Engineers (JSCE), Hiroshima, Japan, September, pp. 343-344.

2006 (43)

Mechanical and Production Engineering

N. A Chowdhury & Anayet U. Patwari “Development of an Automated Process planning system for a rectangular Milling Object” International Journal of Engineering & Technology (IJET) Volume 3(3), page: 58-63, Issue: December 2006.

N. A Chowdhury & Anayet U. Patwari “Simulation of the plastic field in the deformation zone of surface rolling tools under variable work hardening conditions” Journal of Engineering and Technology (JET), volume 5, June 2006.

N. A Chowdhury & Anayet U. Patwari “Design and Construction of a coordinate measuring machine and computerized simulation of a measuring object with flexible means of performing accurate and fast dimensional inspection of objects” Journal of Mechanical Engineering, IEB, Volume ME 35, page: 67-76, June 2006.

N. A Chowdhury & Anayet U. Patwari “Designing and study of a Material Handling System with auto-synchronizing technique for flexible productivity control” International Journal of Engineering & Technology (IJET), volume 3 issue 1, page 7-16, June 2006

Anayet U. Patwari, N. A Chowdhury & S.L Mahmud “Development of an optimization technique by Fuzzy logic to predict the optimum process parameter for Deep drawing process” AMSE Journal, Page 37-46, volume 1 special issue best-of book 2006 of AMSE conferences, France.

S. Kawamura, K. Takao, H. Minamoto, Md. Zahid Hossain, “Influence of the discritizing method on the identified results in boundary value inverse analysis by the boundary element method, Journal of Japan society of mechanical engineers (JSME), Vol. 72. No. 713, pp. 24-31, 2006

Rahman, M., H., A.R. Akhanda and A.K.M. Sadrul Islam, Study, Design and Fabrication of a Solar Powered Adsorption Refrigeration System, proceedings of World Renewable Energy Conference held in Florence, Italy, August 2006.

Electrical and Electronic Engineering

M.J. Hossain, M.A. Hoque, M.M. Ali, K.K. Islam and M.A. Rahman, “Design and Implementation of an MTPA Fuzzy Controller for IPMSM Drives”, Journal of Engineering and Technology, IUT, Vol. 5. No.1. Jan-June, 2006, pp. 47-61

M. Shamsul Alam, M. Abul Kalam Azad and M.A. Hoque, " A General Struble Technique for Solving an n-th Order Weakly Nonlinear Differential System with Damping” International Journal of Non-Linear Mechanics (ELSEVIER), Vol. 41, Sept. 2006, pp. 905-918.

M.J. Hossain, M.A. Hoque, M.M. Ali and M.A. Rahman, "High Performance Fuzzy-Logic-Based Speed Control of IPMSM Drive", Proceedings of the 4th International Conference on Electrical Engineering & 2nd Annual paper Meet, The Institution of Engineers, Bangladesh, January 26-28, 2006, pp. 47-50.

M.J. Hossain, M.A. Hoque, M.M. Ali and M.A. Rahman, "Fuzzy-Logic-Based Control for Induction Motor Drive with the Consideration of Core Loss", Proceedings of the 4th International Conference on Electrical Engineering and 2nd Annual Paper Meet, Dhaka, January 26-28, 2006. pp. 35-38.

Technical and Vocational Education

Muzahid, Mohammad Aman Uddin, Research topic; Women Through the Ages, Published by; Department of Islamic Studies, University of Dhaka, Journal of Dr. Sirjul Haque Islamic Research Centre, Vol No- 1, January-December 2006, pages -07

Muzahid, Mohammad Aman Uddin, Research topic; Informal Islamic Education & Its Role in Human Society, Published by; International Islamic University Chittagong, Journal of IIUC StudiesVol-3, ISSN-1813-7733, December 2006, pages - 09

Attend the seminar on importance of Religion on the education Tribhuvan University, Nepal on 22nd September, 2006

Attend three days long “Leadership Training Program” organize by International Islamic University Chittagong, (IIUC)at BARD, Comilla, Dhaka, and Cox Bazar- 2004, 2005 & 2006 respectively.

Raihan, M. A., Clement, C. K., Tapan, S. M., & Khan, S. H. (2006). Concept of IUT Teachers about Assessing Engineering Students Learning with Essay Type Examination: A Case Study. International Journal of Engineering and Technology (IJET), ISSN: 1812-7711, Vol. 3, Issue. 4, pp.41-46.

Aktaruzzaman, M., Raihan, M.A., & Tapan, S. M. (2006). ICT to Enhance Learning. Journal of Teacher Education, School of Education, Bangladesh Open University (BOU), Gazipur-1704, ISSN: 1812-7517, Vol.4, pp.39-52.

Karim, M.R. & Raihan, M.A. (November, 2006). An Overview of Curriculum Planning in Technical and Vocational Education, An International Workshop on Curriculum Development in technical and Vocational Education, Organized by TVE Department, IUT, Nov. 19-21. (International Workshop)

Raihan, M. A., Clement, C. K., Tapan, S. M., & Khan, S. H. (2006). Concept of IUT Teachers about Assessing Engineering Students Learning with Essay Type Examination: A Case Study. International Journal of Engineering and Technology (IJET), ISSN: 1812-7711, Vol. 3, Issue. 4, pp.41-46.

Aktaruzzaman, M., Raihan, M.A., & Tapan, S. M. (2006). ICT to Enhance Learning. Journal of Teacher Education, School of Education, Bangladesh Open University (BOU), Gazipur-1704, ISSN: 1812-7517, Vol.4, pp.39-52.

Computer Science and Engineering

Abu Raihan Mostofa Kamal, Lutful Karim, Hafiz Md. Hasan Babu and Md. Shariful Islam. Enhanced Security of AODV Protocol in Mobile Ad Hoc Networks. First Inter- national Conference on Next-Generation Wireless Systems 2006 (ICNEWS2006). IEEE Communication Society. Dhaka, Bangladesh. January 2-4, 2006.

Civil & Environmental Engineering

Md. Rezaul Karim (2006). Analysis of Water Supply, Sanitation and Solid Waste Management Situation of Slums in Khulna City, Environmental Sustainability Concerns, pp.105-118, published by EED, CERM and ITN, Dhaka, Bangladesh.

E. Sung, H. M. Shahin, T. Nakai, M. Hinokio & M. Yamamoto. (2006): Ground behavior due to tunnel excavation with existing foundation, Soils and Foundations, vol. 46, no. 2, pp. 189-207.

H. M. Shahin, E. Sung, T. Nakai, M. Hinokio, M. Kikumoto, M. Yamamoto and Y. Tabata. (2006): 2D model tests and numerical simulation in shallow tunneling considering existing building load, Geotechnical Special Publication of American Society of Civil Engineers (ASCE) on Underground construction and ground movement, June, vol. 155, pp. 304-311.

H. M. Shahin, T. Nakai, M. Kikumoto, E. Sung, M. Yamamoto and Y. Tabata (2006): Interaction effect of shallow tunneling and existing flat foundation in 3d condition, Proc. of the Eighth International Summer Symposium, Nagoya, Japan, July, pp. 155-158.

H. M. Shahin, E. Sung, T. Nakai, M. Kikumoto, M. Yamamoto and Y. Tabata (2006): Ground behavior with the distance of foundation due to tunnel excavation– 2D model test and simulation, Proc. of the 3rd IWS on New Frontiers in Computational Geotechnics, Xian, October, pp. 31-36.

M. Hinokio, T. Nakai, F. Zhang, H. M. Shahin, A. Yagyu, S. Noda, T. Kondo and K. Okita (2006): Effect of soil improvement by static compaction method, Proc. of the 41st Japan national conference on geotechnical engineering, Hokkaido, Japan, July, pp. 979-980.

F. Zhang, T. Nakai, H. M. Shahin and Higashihara (2006): Estimation of ground deformation during underground construction in soft ground considering construction sequences, Proc. of the 41st Japan national conference on geotechnical engineering, Hokkaido, Japan, July, pp. 1383-1384.

M. Yamamoto, T. Nakai, F. Zhang, H. M. Shahin, M. Kikumoto, E. Sung and Y. Tabata (2006): Effect of tunnel excavation on the adjacent foundation - 2D model test, Proc. of the 41st Japan national conference on geotechnical engineering, Hokkaido, Japan, July, pp. 1539-1540.

H. M. Shahin, T. Nakai, F. Zhang, M. Kikumoto, E. Sung and M. Yamamoto. (2006): Effect of tunnel excavation on the adjacent foundation - 2D model simulation, Proc. of the 41st Japan national conference on geotechnical engineering, Hokkaido, Japan, July, pp. 1541-1542.

Y. Tabata, T. Nakai, F. Zhang, H. M. Shahin, M. Kikumoto, E. Sung and M. Yamamoto (2006): 3D model test of tunnel excavation considering adjacent structure, Proc. of the 41st Japan national conference on geotechnical engineering, Hokkaido, Japan, July, pp. 1703-1704.

E. Sung, T. Nakai, F. Zhang, H. M. Shahin, M. Kikumoto, M. Yamamoto and Y. Tabata (2006): 3D model simulation of tunnel excavation considering adjacent structure, Proc. of the 41st Japan national conference on geotechnical engineering, Hokkaido, Japan, July, pp. 1705-1706.

H. M. Shahin, T. Nakai, E. Sung, M. Yamamoto and Y. Tabata (2006): Influence of pile length on the interaction effect of tunneling and existing piled raft, Proc. of 61st conference of the Japan Society of Civil Engineers (JSCE), Kyoto, Japan, September, pp. 115-116.

2005 (36)

Mechanical and Production Engineering

N. A Chowdhury & Anayet U. Patwari “Designing and Manufacturing of a low cost Automated Guided Vehicle (AGV) with flexible path design” International Journal of Engineering & Technology (IJET) volume 2 issue 2, page 25-35, December 2005.

M. A. Habib, Md. Rafiqul Islam and M. Arif Hasan Mamun, "Power Generation from Tidal Energy in the Coastal Area of Bangladesh", 5th International Mechanical Engineering Conference and 10th Annual Paper Meet, 30 September-02 October 2005, Dhaka, Bangladesh.

S. Kawamura, T. Yoshida, H. Minamoto, Md. Zahid Hossain, “Simulation of the nonlinear vibration of a string using the cellular automata based on the reflection rule, Elsevier science ltd, applied acoustics, vol. 67, pp. 93-105, 2005

Electrical and Electronic Engineering

M.J. Hossain, K.K. Islam, M.A. Hoque and M.A. Rahman, "Design and Implementation of IPMSM Drives Using Artificial Intelligence", Journal of Engineering and Technology, IUT, Vol. 4. No.2. July-December, 2005, pp. 15-32

M.J. Hossain, M.A. Hoque, M.M. Ali and M.A. Rahman, " High Performance Fuzzy-Logic-Based Control for Induction Motor Drive ", Proceedings of the 8th ICCIT, Islamic University of Technology, December 28-30, 2005, , pp. 58-63.

S. Ali, M. Gharghi, S. Sivoththaman, K. Zeaiter, “Properties and Characterization of Low-Temperature Amorphous PECVD Silicon Nitride Films for Solar Cell Passivation”, Journal of Materials Science, vol. 40, no. 6, pp. 1469-1473, 2005.

Technical and Vocational Education

Attend three days long “Leadership Training Program” organize by International Islamic University Chittagong, (IIUC)at BARD, Comilla, Dhaka, and Cox Bazar- 2004, 2005 & 2006 respectively.

Computer Science and Engineering

Md. Sarwar Morshed, Abu Raihan Mostofa Kamal, Abu Saleh Muhammad Barkat Ullah. Susceptible SQL Detector (SSD) – a Parser-based Security Solution to Prevent SQL-Injection Attack. The 8th International Conference on Computer and Information Technology (ICCIT 2006). Dhaka, Bangladesh. December 28-30, 2005.

Civil & Environmental Engineering

Md. Rezaul Karim, Anwara Begum Shelly and Michel Biswas (2005): People perception and acceptance of rainwater harvesting in a coastal area in Bangladesh, Proceedings of the IRCSA 2005, CD-ROM, 15-18 November, 2005, New Delhi.

Rifaat, S.M., Chin, H.C. (2005). Analysis of Severity of Sing le-Vehicle Crashes in Singapore. Proceedings of the 84th Annual Meeting of Transportation Research Board, Washington, D.C., USA, January 9-13. Paper No. 05-1580.

Md. Rezaul Karim and Md. Wahiduzzaman (2005): Analysis of Industrial Development and Water Quality of the River Rupsha and Bhairab in Khulna City Area, Proceedings of the third Annual Paper Meet and International Conference on Civil Engineering, pp. 223-232, 9-11 March 2005, Dhaka, Bangladesh.

Syed Nesar Ahmed and Md. Rezaul Karim (2005): Study on Water Supply Condition of Selected Pourashavas in the Coastal Region, Proceedings of the Third Annual Paper Meet and International Conference on Civil Engineering, pp. 173-178, 9-11 March 2005, Dhaka, Bangladesh.

M. M. Farias, T. Nakai, H. M. Shahin, D. M. Pedroso, P.G.O. Passos and M. Hinokio. (2005): Ground Densification Due to Sand Compaction Piles, Soils and Foundations, vol. 45, no. 2, pp. 167-180.

T. Nakai, E. Sung, H. M. Shahin, and M. Yamamoto (2005): Simulations of tunnel excavation in 2D and 3D conditions considering building loads, Proc. of the Fifth International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground (TC28), Amsterdam, Netherlands, June, pp. 155-160.

H. M. Shahin and T. Nakai (2005): Finite element analysis of 3D full scale tunnel excavation using subloading tij model, Proc. of the Pipelines -2005, ASCE, USA, Houston, August, pp.101-115.

T. Nakai, H. M. Shahin, M. Hinokio, T. Sada and E. Sung (2005): Influence of existing building load on the deformation and earth pressure of ground due to tunneling, Proc. of the 16th International Conference on Soil Mechanics and Geotechnical Engineering (ICSMGE), Osaka, Japan, September, pp. 1633-1638.

T. Nakai, N. Iwata, H. M. Shahin, Y. Inoue & H. Takei (2005): Influence of wall deflection process and wall deflection mode in retaining wall problems, Proc. of the 2nd China-Japan Geotechnical Symposium, China, Shanghai, pp. 641-646.

Y. Morikawa, H. M. Shahin, T. Nakai, M. Hinokio and A. Yagyu. (2005): Stress induced anisotropy and its formulation, Proc. of JSCE (Chubu Shibu), Japan, March, III-21.

H. M. Shahin, T. Nakai, M. Hinokio, E. Sung and M. Yamamoto. (2005): Numerical Analyses of 3D tunnel excavation considering the effects of existing structure, Proc. of the 40th Japan national conference on geotechnical engineering, Hokkaido, Japan, July, pp. 1821-1822.

E. Sung, T. Nakai, H. M. Shahin, M. Yamamoto and Y. Tabata. (2005): The behaviors of piled raft due to tunnel excavation, Proc. of the 40th Japan national conference on geotechnical engineering, Hokkaido, Japan, July, pp. 1823-1824.

M. Yamamoto, T. Nakai, M. Hinokio, E. Sung, H. M. Shahin, and Y. Tabata. (2005): Model tests of 3D tunnel excavation considering the effects of existing structures, Proc. of the 40th Japan national conference on geotechnical engineering, Hokkaido, Japan, July, pp. 1819-1820.

T. Nakai, M. Hinokio, H. M. Shahin and Y. Morikawa. (2005): Usefulness of tij and its evolution, Proc. of the 40th Japan national conference on geotechnical engineering, Hokkaido, Japan, July, pp. 381-382.

Y. Inoue, T. Nakai, H. M. Shahin, N. Iwata and H. Takei. (2005): Analysis of 3D braced excavation using subloading tij model, Proc. of the 40th Japan national conference on geotechnical engineering, Hokkaido, Japan, July, pp. 1791-1792.

Y. Morikawa, T. Nakai, M. Hinokio, H. M. Shahin, A. Yagyu and A. Yamakita. (2005): Simulation of Stress Induced Anisotropy using Isotropic Hardening, Proc. of the 40th Japan national conference on geotechnical engineering, Hokkaido, Japan, July, pp. 383-384.

A. Yagyu, T. Nakai, M. Hinokio, H. M. Shahin, Y. Morikawa and A. Yamakita. (2005): Validation of isotropic hardening model considering stress induced anisotropy, Proc. of the 40th Japan national conference on geotechnical engineering, Hokkaido, Japan, July, pp. 385-386.

H. M. Shahin and T. Nakai. (2005): Performance of automatic load stepping method for FEM with subloading tij model, Proc. of 60th conference of the Japan Society of Civil Engineers (JSCE), Tokyo, Japan, September.

M. Hinokio, H. M. Shahin, T. Nakai, A. Yagyu, T. Kondou and K. Okita (2005): Efficiency of a static soil densification process - investigated by numerical analysis, Proc. of 60th conference of the Japan Society of Civil Engineers (JSCE), Tokyo, Japan, September.

2004 (24)

Mechanical and Production Engineering

Rashid, A., Mac Donald, B. J. , and Hashmi, M. S. J., Evaluation of the Aesthetics of Products and Integration of the Findings in a Proposed Intelligent Design System, Journal Of Materials Processing Technology, Vol 153-154, pp 380-385, 2004.

Electrical and Electronic Engineering

Casey B. Butt, M. Ashraful Hoque and M. Azizur Rahman, “ Simplified Fuzzy-Logic Based MTPA Control of IPMSM Drive”, IEEE Transactions on Industry Applications, Vol. 40, No. 6, Nov./Dec. 2004, pp. 1529-1535

Md. Kamrul Hasan, Md. Sirajul Alam Khan and Md. Ashraful Hoque, “ Distributed Parallelism Using Clusters”, Proceedings of 7th International Conference on Computer and Information Technology, Dhaka, 26-28 December, 2004. pp.753-756

M.A. Hoque, S.M.A. Razzak and M.A.K. Azad, “A Simple Technique Applied to Edge Detection in Digital Images”, Proceedings of the 3rd International Conference on Electrical & Computer Engineering, Dhaka, December 2004, pp. 434-437

M.A. Hoque, M.J. Hossain, M.S. Anower, M.A.A. Hafiz and M.A. Rahman, “A Novel Approach for Flux Weakening Speed Control of IPMSM Drives”, Proceedings of the 3rd International Conference on Electrical & Computer Engineering, Dhaka, December 2004, pp. 27-30.

M. Q. Huda and S. I. Ali, “Laser Operation from Erbium Doped Silicon,” in Proc. Third International Conference on Electrical and Computer Engineering (ICECE), IEEE regional conf., Bangladesh, pp. 494-497, 2004.

Technical and Vocational Education

Paper presented on Islamic Education in Bangladesh, 20th May 2004 Jamia Millia Islamia, New Delhi, India.

Attend three days long “Leadership Training Program” organize by International Islamic University Chittagong, (IIUC)at BARD, Comilla, Dhaka, and Cox Bazar- 2004, 2005 & 2006 respectively.

Civil & Environmental Engineering

Rifaat, S.M., Chin, H.C. (2004). Analysis of Severity of Pedestrian Crashes in Singapore. Proceedings of the International Conference on Transportation Systems, Planning and Operation, Indian Institute of Technology, Madras, February 18-20 February, pp.789-798.

Karim, M.R. (2004): A study on alternative water supply options and people perception in the arsenic affected areas in Khulna Region, International Symposium on Environmental Management, (ISEM 2004) CD-ROM, 7-8 January 2004, Dhaka, Bangladesh.

H. M. Shahin, T. Nakai, M. Hinokio, T. Kurimoto & T. Sada. (2004): Influence of surface loads and construction sequence on ground response due to tunneling, Soils and Foundations, vol. 44, no. 2, pp. 53-66.

H. M. Shahin, T. Nakai, M. Hinokio & Yamaguchi, D. (2004): 3D effects on pressure and displacements during tunnel excavations, Soils and Foundations, vol. 44, no. 5, pp. 37-49.

H. M. Shahin, T. Nakai, T. Sada, T. Kondou and O. Togano. (2004): Finite element analysis for prediction of ground densification using subloading tij model, Proc. of the Engineering practice and performance of soft deposits, IS - Osaka 2004, Osaka, Japan, June, pp. 131-134.

E. Sung, H. M. Shahin, M. Yamamoto, T. Nakai and M. Hinokio. (2004): Behavior of existing piled raft foundation due to tunnel excavation, Proc. of the 16th Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 13-22.

T. Nakai, M. Hinokio, H. M. Shahin, Y. Inoue, H. Takei and N. Iwata. (2004): Earth pressure and ground movements in 2D and 3D retaining wall problems: model tests and numerical simulation, 9th Int. Symposium on Numerical Models in Geomechanics, NUMOG IX, Ottawa, Canada, August, pp. 669-675.

T. Nakai, H. M. Shahin, N. Iwata and E. Sung (2004): Importance of 3D effects in excavation problems- model tests and numerical analysis, 2nd IWS on New Frontiers in Computational Geotechnics, Brazil, September, pp.3-12.

H. M. Shahin, T. Nakai, M. Hinokio, T. Sada and M. Yamamoto. (2004): Influence of existing building with different types of foundations on tunnel excavation– FEM analysis, Proc. of the 39th Japan national conference on geotechnical engineering, Nigata, Japan, July, pp. 1733-1734.

T. Sada, T. Nakai, M. Hinokio, H. M. Shahin and M. Yamamoto. (2004): Influence of existing building with different types of foundations on tunnel excavation– Model Test, Proc. of the 39th Japan national conference on geotechnical engineering, Nigata, Japan, July, pp. 1731-1732.

H. M. Shahin and T. Nakai. (2004): Simulation of full scale tunnel excavations using TBM considering different excavation rates, Proc. of 59th conference of the Japan Society of Civil Engineers (JSCE), Nagoya, Japan, September, pp. 163-164.

2003 (18)

Electrical and Electronic Engineering

Md. Ashraful Hoque, Md. Zahurul Islam Sarkar, Nandan Kumar Shaha and Md. Anisur Rahman Sohel, “Design and Implementation of Robust Controller Based Interior Permanent Magnet Synchronous Motor Drive”, Proceedings of the ICEECE, Dhaka, December 22-24, 2003, pp. 266-271.

M. Q. Huda, S. I. Ali, “A Study on Stimulated Emission from Erbium in Silicon”, Materials Science and Engineering B, vol. 105, pp. 146–149, 2003.

M. Q. Huda, S. I. Ali, “Prospects of Laser Operation in Erbium Doped Silicon”, in Proc. Materials Research Society Symposium, vol. 770, pp. I3.5.1-I3.5.6, MRS Spring meeting, San Francisco, USA, 2003.

Civil & Environmental Engineering

Karim, M.R and Saha, R.K. (2003): Effects of salinity on the compressive strength of different brand of cement, Seminar on the role of renewable and alternative energy sources for national development, pp. 209-216, 19-20 December, 2003, Khulna, Bangladesh.

Rokonuzzaman, M and Karim, M. R. (2003): Floods in Bangladesh: causes, consequences and management, Seminar on the role of renewable and alternative energy sources for national development, pp. 193-201, 19-20 December, 2003, Khulna, Bangladesh.

Karim, M. R., Sekine, M. and Ukita, T. (2003): Methodology of quantifying the impact of dissolved oxygen depletion on living resources: a statistical approach, Proceedings of the Second Annual Paper Meet and International Conference on Civil Engineering, pp. 269-274, 17-18 July, 2003, Dhaka, Bangladesh.

Md. Rezaul Karim, Masahiko Sekine and Masao Ukita (2003): A model of fish preference and mortality under hypoxic water in the coastal environment, Marine Pollution Bulletin, Vol. 47, Issues 1-6, pp. 25-29, January-June 2003

Karim, M. R., Sekine, M., Higuchi, T., Imai, T. and Ukita, T. (2003): Simulation of fish behavior and mortality in hypoxic water in an enclosed bay, Ecological Modeling, Vol. 159, pp. 27-42, January 2003.

Karim, M. R., Sekine, M. and Ukita, M. (2002): Simulation of eutrophication and associated occurrence of hypoxic and anoxic condition in a coastal bay in Japan, Marine Pollution Bulletin, 45, Issues 1-12, pp. 280-285, September 2002.

Karim, M.R. and Asaduzzaman, M. (2003): Quality of harvested rainwater in the coastal area of Bangladesh, Journal of Science Foundation, Vol. 1, pp. 49-53, June 2003.

T. Nakai, M. Hinokio, H. M. Shahin and T. Sada. (2003): Earth Pressures and Surface Settlements in Shallow Tunnels with Large Cross-Section, Proc. of 12th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, Singapore, August, pp. 879-882.

M. M. Farias, T. Nakai, M. Hinokio, H. M. Shahin, D. M. Pedroso. (2003): Prediction of the densification process of compacted sandpiles using subloading tij model, Proc. of IWS on Prediction and Simulation Methods in Geomechanics, Athens, Greece, October, pp. 185-188.

H. M. Shahin, T. Nakai, T. Sada, S. Taka and Y. Matsumoto. (2003): Influence of initial stresses induced by existing building on tunnel excavation, Proc. of the 38th Japan national conference on geotechnical engineering, Akita, Japan, July, pp. 1729-1730.

T. Sada, T. Nakai, M. Hinokio, H. M. Shahin, S. Taka, and Y. Matsumoto. (2003): 3D Effects in Tunneling –Model tests and Numerical analyses, Proc. of the 38th Japan national conference on geotechnical engineering, Akita, Japan, July, pp. 1727-1728.

H. M. Shahin, T. Nakai, M. Hinokio and T. Sada. (2003): Tunnel excavations considering building loads: 2D model tests and numerical analyses, Proc. of 58th conference of the Japan Society of Civil Engineers (JSCE), Tokushima, Japan, September, section 3-001.

2002 (19)

Mechanical and Production Engineering

Rashid, A., and Hashmi, M., Expert System Based Intelligent CAD/CAM: An Overview, Proceedings of 19th International Manufacturing Conference (IMC-19), Queen’s University Belfast, Northern Ireland, UK, pp 35-144, August 28-30, 2002

Md. Zahid Hossain and K. Mizutani and H. Sawai, “Chaos and Multiple Periods in Unsymmetrical Spring and Damping System with Clearance”, Journal of Sound and Vibration , Elseiver Science Ltd. Vol. 250(2), pp. 229-245, 2002.

Md. Zahid Hossain, K. Mizutani, H. Sawai and M. Kato, “Preloading Effects on Clearance Problem in Rotor-Coupling Vibration System: Experimentation and Simulation”, Journal of Chaos, Solitons and Fractals, Vol. 14, pp. 1380-1378, 2002

Electrical and Electronic Engineering

M.A. Rahman, M.A. Hoque, C.B. Butt, M. Nasir Uddin and M.A. Abido, “ Testing of Genetic-PI Based Controller for IPMSM Drive”, Proceedings of 2002 IEEE International Conference on Industrial Technology, Bangkok, December 2002, pp.119-124

M.A. Hoque, Casey Butt and M.A. Rahman, “ A Novel Approach for MTPA Control of IPMSM Drive”, Proceedings of the Second International Conference on Electrical & Computer Engineering, Dhaka, December 2002, pp. 336-339.

Civil & Environmental Engineering

H. M. Shahin, T. Nakai, M. Hinokio and T. Sada. (2002): 3D Effects on Surface Settlements and Earth Pressures in Tunneling, Proc. of the 1st IWS on New Frontiers in Computational Geotechnics, Canada, September, pp. 69-74.

T. Nakai, H. M. Shahin. T. Tamura, T. Hashimoto and J. Nagaya. (2002): Analyses of three abreast shallow tunnels considering construction sequence and ground depths, Proc. of the 3rd Int. Symposium (IS-Toulouse)-Geotechnical Aspects of Underground Construction in Soft Ground, Toulouse, France, November, pp. 155-160.

H. M. Shahin, T. Nakai, M. Hinokio, T. Kurimoto and T. Sada. (2002): 2D and 3D Model tests and Numerical Analyses in Shallow Tunneling, Proc. of the 37th Japan national conference on geotechnical engineering, July, Osaka, Japan, pp. 1671-1672.

T. Kurimoto, T. Nakai, M. Hinokio, H. M. Shahin and T. Sada. (2002): 2D Model Tests and Numerical Analyses in Shallow Tunneling with Large Cross-Section, Proc. of the 37th Japan national conference on geotechnical engineering, July, Osaka, Japan, pp. 1673-1674.

H. M. Shahin, T. Nakai, D. Yamaguchi, T. Kurimoto and T. Sada. (2002): Tunnel excavation problems considering construction sequences, Proc. of 126th Symposium on Ground Deformation considering construction sequence, Tokyo, Japan, September, pp. 183-190.

2001 (15)

Mechanical and Production Engineering

K. Mizutani, Md. Zahid Hossain, H. Sawai, “Nonlinear Torsional Vibrations of a Shaft System with the Hysteretic and Two-staged Torsional Stiffness”, Trans. of JSME, Vol. 67, No. 658(C), pp. 60-66, 2001

Electrical and Electronic Engineering

S. Alam, K.K. Islam, A. Alim and M.A. Hoque, “A Methodology for Evaluating Physical System Performance Using Digital Technique”, West Indian Journal of Engineering, Vol. 24, No. 1, July 2001, pp.42-54

M. Q. Huda, S. I. Ali, S. A. Siddiqui, “Rise-time and Fall-time Profile of Erbium Luminescence in Silicon”, Presented in 5th IEEE/WSES multiconference on Circuits, Systems, Communications and Computers (CSCC 2001), July 8-15, Crete Island, Greece, published in post conference book Advances in Systems Science: Measurement, Circuits and Control, WSEAS press, ISBN 960 8052 394, pp. 378-381.

Technical and Vocational Education

F.A. Haolader & W. Ihbe. Technical & Pedagogical Aspects in Designing & Developing Teaching /Learning Environment-Prototypical Realization of ISO-OSI 7-Layer Model. In: Realities in Science, Mathematics and Technical Education, 2001, ISBN 99917-1-078-7.

Civil & Environmental Engineering

Karim, M. R., Sekine, M. and Ukita, M. (2001): Assessment of the occurrence of anoxia and hypoxia due to coastal construction in a enclosed water area, proceedings of the MODSIM-2001, International Congress on Modeling and Simulation, pp. 209-214, 10-13 December 2001, Canberra, Australia

Karim, M. R., Sekine, M. and Ukita, M. (2001): Simulation of the Probability of Occurrence of Oxygen-deficient Water in the Shallow Zones of Hakata Bay, Japan, proceedings of the 56th Annual Conference of JSCE, pp. 424-425, 5-6 October, 2001, Kumamoto, Japan.

Karim, M. R., Sekine, M. and Ukita, M. (2001): Eutrophication model for a shallow coastal bay in Japan, proceedings of the ASIAN WATERQUAL 2001, first IWA Asia-Pacific Regional Conference, pp. 277-282, 12-15 September 2001, Fukuoka, Japan.

Karim, M. R., Sekine, M. and Ukita, M. (2000): Arsenic contamination of ground water and public health consequences in Bangladesh, proceedings of the Second International Summer Symposium, pp. 357-360, 28 July 2000, Tokyo, Japan.

Karim, M. R., Sekine, M., Higuchi, T. and Ukita, M. (2001): Simulation of the probability of occurrence of hypoxic and anoxic water in a coastal bay due to eutrophication and land reclamation, Journal of Environmental System and Engineering, JSCE, No. 692/VII-21, pp. 83-97, November 2001.

T. Nakai, D. Yamaguchi and H. M. Shahin. (2001): Model Tests of tunneling in Sandy and Clayey Grounds with Different Construction procedure, Proc. of the Regional Aspects of Underground Construction in Soft Ground, China, Shanghai, pp. 169-172.

T. Nakai, D. Yamaguchi, H. M. Shahin, T. Kurimoto and M. M. Farias. (2001): Earth pressure and ground movements due to tunneling – model tests and analyses, Proc. of Int. Sym. on Modern Tunneling Science and Technology, Kyoto, Japan, pp. 153-158.

H. M. Shahin, T. Nakai. T. Hoshikawa, D. Yamaguchi and T. Kurimoto. (2001): Experimental and numerical analysis of ground deformations considering the construction processes of tunnel excavations, Proc. of the 36th Japan national conference on geotechnical engineering, Tokushima, Japan, June, pp. 1775-1776.

T. Kurimoto, T. Nakai, D. Yamaguchi and H. M. Shahin. (2001): Development of three-dimensional apparatus for model test by considering construction process, Proc. of the 36th Japan national conference on geotechnical engineering, Tokushima, Japan, June, pp. 1947-1948.

2000 (9)

Civil & Environmental Engineering

Karim, M. R., Badruzzaman, ABM, Sekine, M., and Ukita, M. (2000): Assessment of nutrients and dissolved oxygen in a river system in Bangladesh using a water quality model, Journal of Environmental System and Engineering, JSCE, No. 664/VII-17, pp. 97-107, November 2000.

D. Yamaguchi, T. Nakai, H. M. Shahin and H. Mizukoshi. (2000): 3D model tests on tunnel excavation considering excavation process Proc. of the 35th Japan national conference on geotechnical engineering, June, Gifu, Japan, vol-2, pp. 2065-2066.

1999 (4)

Mechanical and Production Engineering

K. Mizutani , M. Z. Hossain “Clearance and Dry Friction Study in a Nonlinear Torsional Vibration of a Rotating Machinery”, Proc. of ASME, DETC/VIB-8297, 1999

Electrical and Electronic Engineering

M.N. Uddin, M.A. Hoque and M.A. Rahman, “Adaptive ANN Based IPSM Drive Incorporating Flux Weakening Operation”, Proceedings of the International Power Engineering Conference, Singapore, Vol. II, May 1999, pp. 595-600.

Civil & Environmental Engineering

Sekine, M., Karim, M.R., Ukita, M. and Hamada, E. (1998): Study on the influence of hypoxia on fish in coastal construction area, proceedings of the MEDCOAST-EMECS 99 Joint Conference, Land-Ocean Interaction: Managing Coastal Ecosystems, pp. 695-705, 9-November 1999, Antalya, Turkey.

1998 (8)

Electrical and Electronic Engineering

M.A. Rahman and M.A. Hoque, “On-line Adaptive Artificial Neural Network Vector Control of Permanent Magnet Synchronous Motor”, IEEE Transactions on Energy Conversion, Vol. 13, No. 4, December 1998, pp. 311-318

M.A. Rahman, B.So, M.R. Zaman and M.A. Hoque, “Testing Algorithms for a Stand-Alone Digital Relay for Power Transformer”, IEEE Transactions on Power Delivery, Vol. 13, No. 2, April 1998, pp. 374-385

M.N. Uddin, M.A. Hoque and M. A. Rahman, “Recent Developments in Large PM Synchronous Machine Drives Technology,” Conference Record of the Large Engineering, Halifax, Canada, June 1998, pp.201-205

M.A. Rahman, M.N. Uddin, T.S. Radwan and M.A. Hoque, “Intelligent Speed Control of Interior Permanent Magnet Synchronous Motors”, Proceedings of the IEEE/Industry Applications Society Annual Conference, Vol. 1, 1998.

Technical and Vocational Education

F. A. Haolader. "Microprocessors and Interfacing." A textbook of Bangladesh Technical Education Board. Gyanokosh Publishers, Bangla Bazar Dhaka, 1998.

Civil & Environmental Engineering

Karim, M. R. and Badruzzaman, ABM. (1998): Simulation of nutrient transport and dissolved oxygen in a typical river in Bangladesh, proceedings of Civil and Environmental Engineering Conference, New Frontiers and Challenges, pp. 49-58, 8-12 November 1999, Bangkok, Thailand.

1997 (5)

Electrical and Electronic Engineering

M.A. Rahman and M.A. Hoque, “On-line Self-Tuning Artificial Neural Network Based Speed Control of a Permanent Magnet DC Motor”, IEEE/ASME Transactions on Mechatronics, Vol. 2, No. 3, September 1997, pp. 169-178

M.A. Hoque, Md. Shahid Uz Zaman and Md. Shamsuzzaman, “Artificial Neural Network and High Performance Motor Drives”, Paper presented in Annual Meeting of the IEB, 1997.

M.A. Hoque and M.A. Rahman,, “ Speed Control of a High Performance Interior-Type Permanent Magnet Synchronous Motor Drive Based on Self-Tuning Artificial Neural Network”, Proceedings of the Newfoundland Electrical and Computer Engineering Conference, Canada, 1997.

M.A. Jabbar, M.A. Hoque and M.A. Rahman, “Sensorless Permanent Magnet Synchronous Motor Drives”, Proceedings of IEEE/Canadian Conference on Electrical and Computer Engineering, May 1997, Vol. II, pp. 878-883

M.A. Hoque and M.A. Rahman, “Experimental Implementation of ANN Based Speed Control for Interior-Type Permanent Magnet Synchronous Motors”, Proceedings of the 1997 IEEE International Electric Machines and Drives Conference, Catalogue # 97 282

1996 (5)

Electrical and Electronic Engineering

M.R. Zaman, M.A. Hoque and M.A. Rahman, “Artificial Neural Network Based Protection of Power Transformer”, Canadian Electrical Association Transactions, Power System Planning and Operation Section,1996.

M.R. Zaman, M.A. Hoque and M.A. Rahman, “On-line Implementation of the Artificial Neural Network Based Protection for Power Transformer”, Proceedings of the Newfoundland Electrical and Computer Engineering Conference, Canada, 1996.

M.A. Hoque and M.A. Rahman, “A DSP Based Variable Speed PM Motor Drives”, Proceedings of the Newfoundland Electrical and Computer Engineering Conference, Canada, 1996.

M.A. Rahman, R. Qin and M.A. Hoque, “Design and DSP Based Control of Hybrid Permanent Magnet Hysteresis Synchronous Motor”, Proceedings of the Fourth International Conference on Control, Automation, Robotics and Vision, Singapore, December 1996.

M.A. Hoque and M.A. Rahman, “Speed Control of a High Performance Interior Type Permanent Magnet Synchronous Motor”, Proceedings of the Fourth International Conference on Control, Automation, Robotics and Vision, Singapore, December 1996.

1995 (3)

Electrical and Electronic Engineering

M.A. Hoque, M.R. Zaman and M.A. Rahman, “Neural Network Approach for Rotor Position Sensing for Permanent Magnet Synchronous Motor”, Proceedings of the Newfoundland Electrical and Computer Engineering Conference, Canada, 1995.

M.A. Hoque, M.R. Zaman and M.A. Rahman, “Artificial Neural Network Based Controller for Permanent Magnet DC Motor Drives”, Proceedings of the IEEE/Industry Application Society Annual Conference, Orlando, USA, Vol.1, 1995.

M.A. Hoque, M.R. Zaman and M.A. Rahman, “Artificial Neural Network Based Permanent Magnet DC Motor Drives”, Proceedings of the IEEE/Industry Application Society Annual Conference, Orlando, USA, Vol.2, 1995

1994 (4)

Electrical and Electronic Engineering

M.R. Zaman, M.A. Hoque and M.A. Rahman, “Wave-shape Recognition and Harmonic Analysis using Artificial Neural Network”, “Proceedings of the Newfoundland Electrical and Computer Engineering Conference, Canada, 1994.

M.A. Hoque and M.A. Rahman, “Dynamic Models for Permanent Magnet Synchronous Motor Drives”, Proceedings of the Newfoundland Electrical and Computer Engineering Conference, Canada, 1994

M.A. Hoque and M.A. Rahman, “Sensorless Algorithm for Permanent Magnet Synchronous Motor Drives, “Proceedings of the Newfoundland Electrical and Computer Engineering Conference, Canada, 1994.

M.A. Hoque and M.A. Rahman, “Speed and Position Sensorless Permanent Magnet Synchronous Motor Drives”, Proceedings of IEEE/Canadian Conference on Electrical and Computer Engineering, Halifax, Canada, 1994.

1993 (1)

Electrical and Electronic Engineering

M.A. Hoque and M.A. Rahman, “Simulation of Brushless DC Motor Characteristics,” Proceedings of the Newfoundland Electrical and Computer Engineering Conference, Canada, 1993.

1985 (1)

1970 (1)

Electrical and Electronic Engineering

Al-Arif, S.M.R., Ahmed, A. and Riyadh, M.M.S., Comparative Study of Radiated Heat by Aluminium & Copper Cable. 2012 International Conference on Information and Computer Networks (ICICN 2012) IPCSIT vol. 27 (2012) © (2012) IACSIT Press, Singapore

Undated

F Sharmin, D C Roy and M A Basith, “Photocatalytic water splitting ability of Fe/MgO-rGO nanocomposites towards hydrogen evolution”, Int. J. Hydrog. Energy, vol. 46, pp. 38232-38246, 2021.

F Sharmin and M A Basith, “Highly efficient photocatalytic degradation of hazardous industrial and pharmaceutical pollutants using gadolinium doped BiFeO3 nanoparticles”, J. Alloys Compd., vol. 901, p. 163604, 2022

F Sharmin and M A Basith, “Simple low temperature technique to synthesize sillenite bismuth ferrite with promising photocatalytic performance”, ACS Omega, vol. 7, pp. 34901–34911, 2022

F Sharmin, F Ara, and M A Basith, “Comparison of the structure- property relationships between sillenite and perovskite phases of Bi0.9Dy 0.1FeO3 nanostructures”, New J. Chem., vol. 47, pp. 4707–4719, 2023

M A Adib, F Sharmin and M A Basith, "Tuning the morphology, stability and optical properties of CsSnBr3 nanocrystals through bismuth doping for visible-light-driven applications", Nano. Adv, vol. 5(22), pp.6194-6209, 2023.

T V Rozario, F Sharmin, S Shamim, and M A Basith, "10% La-doped BiFeO3 nanoceramics: A promising magnetic catalyst to degrade pharmaceutical antibiotics", Ceram. Int., 50(2), pp.3606-3617, 2024.

F Sharmin and M A Basith, “Low temperature synthesis of 10% Dy doped BiFeO3 nanoparticles by cost effective hydrothermal technique and comparison of its structural and magnetic properties with bulk counterpart”, presented (poster) at the International Conference on Nanotechnology and Condensed Matter Physics (ICNCMP-2018), Dhaka, Bangladesh, 11-12 January 2018.

F Sharmin and M A Basith, “Low temperature synthesis of MoS2 incorporated BiFeO3 nanocomposite for investigation of structural, morphological, optical and visible light photocatalytic activities for environmental application”, presented (oral) at the International Conference on Science and Technology for Celebrating the Birth Centenary of Bangabandhu (ICSTB-2021), Dhaka, Bangladesh, 11-13 March 2021

F Sharmin and M A Basith, “Photodegradation pathways of Rhodamine B over Gd doped BiFeO3 nanoparticles under solar irradiation”, presented (oral) at the 4th International Conference on Nanomaterials Science and Mechanical Engineering, University of Aveiro, Portugal, 06-09 July 2021

F Sharmin, D C Roy, and M A Basith, “Facile synthesis of Fe/MgO- rGO nanocomposites for efficient hydrogen evolution via photocatalytic water splitting”, presented (poster) at the 15th International Conference on Materials Chemistry (MC-15), United Kingdom, 12-15 July 2021

Mechanical and Production Engineering

Adib Adnan, Shadman Mahmud, Mohammed Raihan Uddin, Anish Modi, M Monjurul Ehsan, Sayedus Salehin. “Energy, Exergy, Exergoeconomic, and environmental (4E) analyses of thermal power plants for municipal solid waste to energy application in Bangladesh”. Waste Management 134 (2021):136-148. Impact Factor -7.14, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S0956053X21004311

Mohammad Masrur Hossain, Md. Sakib Hossain, Niyaz Afnan Ahmed, M Monjurul Ehsan, “Numerical Investigation of a modified Kalina cycle system for high-temperature application and genetic algorithm based optimization of the multi-phase expander’s inlet condition”, Energy and AI 6 (2021) 100117. SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666546821000665

Mohammad Masrur Hossain, Niyaz Afnan Ahmed, Md Abid Shahriar, M Monjurul Ehsan, Sayedus Salehin, Chaudhary Awais Salman, “Analysis and optimization of a modified Kalina cycle system for low-grade heat utilization”, Energy Conversion and Management: X 12(2021) 100121 Cite Score-4.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174521000465

Faruque, Md Walid, Mahdi Hafiz Nabil, Mohammed Raihan Uddin, M. Monjurul Ehsan, and Sayedus Salehin. "Thermodynamic assessment of a triple cascade refrigeration system utilizing hydrocarbon refrigerants for ultra-low temperature applications" Energy Conversion and Management: X 14 (2022): 100207. Cite Score-4.2, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590174522000307

Muhammad Awais, Arafat A Bhuiyan, Sayedus Salehin, M Monjurul Ehsan, Basit Khan, Md Hamidur Rahman, “Synthesis, heat transport mechanisms and thermophysical properties of nanofluids: A critical overview”. International Journal of Thermofluids 10 (2021): 100086. Cite Score-6.6, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202721000240

Awais, Muhammad, Najeeb Ullah, Javaid Ahmad, Faizan Sikandar, M Monjurul Ehsan, Sayedus Salehin, and Arafat A. Bhuiyan. "Heat transfer and pressure drop performance of Nanofluid: A state-of-the-art review." International Journal of Thermofluids (2021): 100065. Cite Score-6.6, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202721000033

A K Azad, Salma Parvin, and Md. Mustafa Kamal Chowdhury, ''Effects of Hartmann number on combined convection in a channel with cavity using Cu-water nanofluid", AIP Conference Proceedings, 2017;Volume(s) 1851, 020081, https://doi.org/10.1063/1.4984710.

A K Azad, M.M. Rahman and Hakan F. Öztop, "Effects of Joule Heating on Magnetic Field inside a Channel along with a Cavity", Procedia Engineering, 27-Dec-2014, Volume(s) 90, Pages 389-396, https://doi.org/10.1016/j.proeng.2014.11.867.

A K Azad, M. J. H. Munshi, M. M. Rahman and M. K. Chowdhury, "Analysis of Combined Convection in an Open Cavity under Constant Heat Flux Boundary Conditions and Magnetic Field Using Finite Element Method", Journal of Scientific Research, Vol. 6(2), 2014, pp. 243-256, https://doi.org/10.3329/jsr.v6i2.14505.

A K Azad, M.J.H. Munshi and M.M. Rahman, "Double Diffusive Mixed Convection in a Channel with a Circular Heater", Procedia Engineering, 2013, Vol. 56, pp. 157-162, https://doi.org/10.1016/j.proeng.2013.03.102.

M. M. Billah, M.J.H. Munshi, A K Azad, M.S. Uddin, M.M. Rahman, "Numerical simulation of magneto-hydrodynamics mixed convection in an open channel having a semicircular heater", Journal of Naval Architecture and Marine Engineering, 2012, Vol. 9, pp. 1-10, https://doi.org/10.3329/jname.v9i2.8020

M.M., Billah, M.M. Rahman, M. Shahabuddin and A K Azad, "Heat Transfer Enhancement of Copper-Water Nanofluids in an Inclined Lid-Driven Triangular Enclosure", Journal of Scientific Research, 2011, Vol. 3(2), pp. 525-538, https://doi.org/10.3329/jsr.v3i3.7642.

Md Sirazul Islam, TarunKanti Pal, Mohammad Mamotaj Uddin, Mohammad Khairul Islam and Md.Abul Kalam Azad, Book Chapter, Higher Secondary Higher Mathematics 1st Paper, 2016. NCTBT accepted and published.

M.J.H. Munshi, A K Azad, Rowshon Ara Begum, M. Borhan Uddin, and M.M. Rahman, Modeling and simulation of MHD convective heat transfer of channel flow having a cavity, International Journal of Mechanical and Materials Engineering (IJMME), 2013, Vol. 8(1), pp. 63-72.

A K Azad, M.J.H. Munshi, M.M. Billah and M.M. Rahman, "Finite Element Analysis on MHD Mixed Convection in a Lid-Driven Cavity with Semi-Circular Heater", 5th BSME International Conference on Thermal Engineering, 2012, 21-23 Dec., Dhaka, Bangladesh.

A K Azad, M.M. Rahman, M.M. Billah, M. A. Rahman, "Finite Element Simulation on MHD Mixed Convection in a ventilated Cavity", Proceedings of the International Conference on Mechanical Engineering and Renewable Energy, ICMERE 2011, 22- 24 December, Chittagong, Bangladesh.

M.M. Billah, M.M. Rahman, U.K. Suma, A K Azad, "Numerical Analysis on the Effects of Non-Dimensional parameter on MHD Mixed Convection inside a ventilated Cavity", 17th Mathematics Conference, 2011, 22-24, December, Jahangirnagar University, Savar, Dhaka, Bangladesh.

A CFD model for biomass combustion in a packed bed furnace MR Karim, IRQ Ovi, J Naser AIP Conference Proceedings 1754 (1), 05002

Effect of aspect ratio on convective heat transfer for flat cross section using nanofluid SR Faysal, IRQ Ovi, AKMS Islam AIP Conference Proceedings 1851 (1), 020016

Muzalwana A. Talib, Susila Munisamy, Shamsuddin Ahmed (2011), Quality monitoring with multivariate control charts a case of an automotive stamped parts manufacturing plant submitted for a Book Chapter of a book to be published under the Department of Applied Statistics, Faculty of Econ & Admin, UM. 

M. Abdul Quader, Shamsuddin Ahmed, (2017), “Bioenergy with Carbon Capture and Storage (BECCS): Future Prospect of Carbon-Negative Technologies”, Chapter 4, Book Title: Clean Energy for Sustainable Development, Elsevier, Academic Press. pages 91-140. ISBN: 978-0-12-805423-9, DOI: http://dx.doi.org/10.1016/B978-0-12-805423-9.00004-1

M. Abdul Quader, Shamsuddin Ahmed, Raja Ariffin Raja Ghazilla, (2016), ‘Recent progress and future trends of CO2 breakthrough iron and steelmaking technologies for CO2 mitigation’, Chapter 22, Book Title: “Ironmaking and Steelmaking Processes” 2016, Springer International Publishing, Switzerland, pages 373-388, DOI:10.1007/978-3-319-39529-6_22.

Muzalwana A. Talib, Susila Munisamy, Shamsuddin Ahmed (2009), A Multivariate Control Chart Scheme For Quality Monitoring Of Automotive Stamping Process -An Empirical Study Of A Malaysian Plant , Chapter 7, Research Colloquium on Advances in Quality Engineering and Management in the Malaysian Automotive Industry, pages 145- 172, Business and Advanced Technology Centre, University Technology Malaysia International Campus, Kuala Lumpur, May 2009. 

Formulating and Solving Stochastic Truck and Trailer Routing Problem Authored by my PhD candidate Dr Seyedmehdi Mirmohammadsadeghi. I was the lone supervisor. LAP LAMBERT Academic Publishing (2015-07-06 ), ISBN-13: 978-3-659-75331-2, ISBN-10:3659753319; Website: https://www.lap-publishing.com/ Number of pages: 168; Category: Mechanical engineering, manufacturing technology Keywords: Meta-heuristic Algorithms, Operations Research, Vehicle Routing Problem

M Monjurul Ehsan, Muhammad Awais, Sangkyoung Lee, Sayedus Salehin, Zhiqiang Guan, Hal Gurgenci. “Potential prospects of supercritical CO2 power cycles for commercialisation: Applicability, research status, and advancement”. Renewable and Sustainable Energy Reviews 172 (2023): 113044. Impact factor-16.78, Cite Score-28.5, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S136403212200925X

Faruque, Md Walid, Yasin Khan, Mahdi Hafiz Nabil, M. Monjurul Ehsan, and Azharul Karim. "Thermal Performance Evaluation of a Novel Ejector-Injection Cascade Refrigeration System." Thermal Science and Engineering Progress (2023): 101745. Impact factor-4.56, Cite Score-7.1, SJR rank-Q-1 https://www.sciencedirect.com/science/article/abs/pii/S2451904923000987

Bishal, Salim Sadman, Dewan Fahim Faysal, M. Monjurul Ehsan, and Sayedus Salehin. "Performance evaluation of an integrated cooling and power system combining supercritical CO2, gas turbine, absorption refrigeration, and organic rankine cycles for waste energy recuperating system." Results in Engineering (2023): 100943. Cite Score-3.9, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2590123023000701

Ahmad, Foyez, Sajjad Mahmud, M. Monjurul Ehsan, and Musfequs Salehin. "Thermo-Hydrodynamic Performance Evaluation of Double-Dimpled Corrugated Tube Using Single and Hybrid Nanofluids." International Journal of Thermofluids (2023): 100283. Cite Score-6.6, SJR rank-Q-1 https://www.sciencedirect.com/science/article/pii/S2666202723000058

Electrical and Electronic Engineering

A M K Muntasir Shamim, Brian Garra,Kaisar Alam,Nima Akhlaghi,Md. Ruhul Amin,Areeq Hasan,Maisha Alam,Rafiul Hasan “Feature based 2D Multistage strain estimation method”, Abstract ID# 568270, published at American Institute of Ultrasound in Medicine (AIUM), Orlando, Florida,2019.

Shaiban Ahmed, Brian S Garra, Nima Akhalghi, A M K Muntasir Shamim, Kaisar Alam “An Adaptive Strain Estimation Algorithm Using a Short-Term Correlation”, Abstract ID#775074. published at American Institute of Ultrasound in Medicine, AIUM 2020.

Ehsan Ul Islam Abir, Goutam Ghoshal, Sabiq Muhtadi, Shaiban Ahmed, Rasheed Abid, Juan Shan, S.N. Akhlagi, Brian S. Garra, Rafiul Hasan and S. Kaisar Alam, "Breast Tumor Classification Using Homodyned K Distribution", Ultrasonic Imaging, Volume-41(3), SAGE Journals, UITC Abstracts, 2019, doi: https://doi.org/10.1177/0161734619842019

Md. Fokhrul Islam, Mohd Alauddin Mohd Ali & Burhanuddin Yeop Majlis. 2008. Reliability Assessment of Micro-machined Fixed-Fixed Beam Based on FE-simulation and Probabilistic Sampling. IEEE Transaction on Device and Materials Reliability, Vol. 8, No. 4, pp. 664-670.

Md. Fokhrul Islam, Mohd Alauddin Mohd Ali & Burhanuddin Yeop Majlis. 2008. Probabilistic Analysis of Micro-machined Fixed-Fixed Beam for Reliability. IET, Micro & Nano Letters, Vol. 3, No. 3, pp. 95-100.

Md. Fokhrul Islam, Mohd Alauddin Mohd Ali & Burhanuddin Yeop Majlis. 2010. RF MEMS Tunable Filter using Micro Fixed-Fixed Beam. Microwave and Optical Technology Letters, Vol. 52, No. 3, pp. 592-597.

Md. Fokhrul Islam, Mohd Alauddin Mohd Ali & Burhanuddin Yeop Majlis. 2008. RF MEMS-Based Tunable Filter for X-band Applications. Journal of Applied Sciences, Vol. 8, No. 1, pp. 189-191.

Md. Fokhrul Islam, Mohd Alauddin Mohd Ali, Burhanuddin Yeop Majlis & Norbahiah Misran. 2008. Compact Dual-Band Dual-Polarized Microstrip Patch Antenna for Synthetic Aperture Radar. Daffodil International University Journal of Science and Technology, Vol. 3, No. 2, pp. 41-45.

Md. Fokhrul Islam, Mohd Alauddin Mohd Ali & Burhanuddin Yeop Majlis. 2007. Parallel Coupled Microstrip Bandpass Filter for X-band Applications. Daffodil International University Journal of Science and Technology, Vol. 2, No. 2, pp. 27-31.

Mohammad T. Kawser, Md. Nazrul Islam Siddique, Zunaed Kibria, Abdullah Al Noman, "Estimation of the Feasibility of Underlay Inband Device-To-Device Communication based on Radio Conditions in LTE", International Journal of Future Generation Communication and Networking (IJFGCN), ISSN: 2233-7857 (Print); 2207-9645 (Online), NADIA, (2019), Vol. 12, No. 2, pp. 11-22.

Md. Nazrul Islam Siddique, Nadim Ahmed, Saad Mohammad Abdullah, Md. Ziaur Rahman Khan, "An Adaptive Transmitter for Capacitive Power Transfer System in Electric Vehicle Charging Applications under Misalignment Conditions", accepted in International Journal of Electrical and Computer Engineering.

Zamee, M.A., Hossain, M.M., Ahmed, A. and Islam, K.K., 2016, May. Automatic generation control in a multi-area conventional and renewable energy based power system using differential evolution algorithm. In 2016 5th International Conference on Informatics, Electronics and Vision (ICIEV) (pp. 262-267). IEEE.

Shahriar, M.S., Ahmed, M.A., Rahman, M.I. and Khan, A.I., 2013, December. Comparison of MPC and conventional control methods for the stability enhancement of UPFC connected SMIB system. In 2013 2nd International Conference on Advances in Electrical Engineering (ICAEE) (pp. 223-228). IEEE.

Andalib-Bin-Karim, C., Hossain, M.R., Adham, M.I. and Ahmed, A., 2015, May. Small signal stability analysis of power system equipped with VSC based back to back HVDC. In 2015 International Conference on Electrical Engineering and Information Communication Technology (ICEEICT) (pp. 1-6). IEEE.

Zamee, M.A., Islam, K.K., Ahmed, A. and Zafreen, K.R., 2016, January. Differential evolution algorithm based load frequency control in a two-area conventional and renewable energy based nonlinear power system. In 2016 4th International Conference on the Development in the in Renewable Energy Technology (ICDRET) (pp. 1-6). IEEE.

Abdullah, S.M., Ahmed, A. and Islam, Q.N.U., 2020. Nature-inspired Hybrid Optimization Algorithms for Load Flow Analysis of Islanded Microgrids. Journal of Modern Power Systems and Clean Energy, 8(6), pp.1250-1258.

Rahman, M.M., Ahmed, A., Galib, M.M.H. and Moniruzzaman, M., 2021. Optimal damping for generalized unified power flow controller equipped single machine infinite bus system for addressing low frequency oscillation. ISA transactions. https://doi.org/10.1016/j.isatra.2021.01.031

Ahmed, A., Ullah, M.S. and Hoque, M.A., 2019. Optimal Design of Proportional–Integral Controllers for Grid-Connected Solid Oxide Fuel Cell Power Plant Employing Differential Evolution Algorithm. Iranian Journal of Science and Technology, Transactions of Electrical Engineering, 43(4), pp.999-1019.

Shahriar, M.S., Shafiullah, M., Rana, M.J., Ali, A., Ahmed, A. and Rahman, S.M., 2020. Neurogenetic approach for real-time damping of low-frequency oscillations in electric networks. Computers & Electrical Engineering, 83, p.106600.

Saber, M.G., Sagor, R.H. and Ahmed, A., 2016. A genetic algorithm based approach for the extraction of optical parameters. Silicon, 8(2), pp.245-250.

Ahmed, A. and Ullah, M.S., 2016. Optimal design of proportional–integral controllers for stand-alone solid oxide fuel cell power plant using differential evolution algorithm. SpringerPlus, 5(1), pp.1-27.

Ahmed, A. and Ullah, M.S., 2016. Input–Output Linearization-Based Controller Design for Stand-Alone Solid Oxide Fuel Cell Power Plant. Arabian Journal for Science and Engineering, 41(9), pp.3543-3558.

Saber, M.G., Shahriar, K.A., Ahmed, A. and Sagor, R.H., 2016. Bio-inspired optimization algorithms for optical parameter extraction of dielectric materials: A comparative study. Chinese Physics B, 25(10), p.105101.

Saber, M.G., Ahmed, A. and Sagor, R.H., 2017. Performance analysis of a differential evolution algorithm in modeling parameter extraction of optical material. Silicon, 9(5), pp.723-731.

Ahmed, A., Galib, M.M.H., Zaman, S.M.K. and Sarowar, G., 2018. An optimization methodology of susceptance variation using lead-lag controller for grid connected FSIG based wind generator system. Journal of the Franklin Institute, 355(1), pp.197-217.

Ahmed, A. and Ullah, M.S., 2010. Dynamic equivalence of a large power system using power system simulator for engineers (PSS/E). Journal of Engineering and Technology, 8(2), pp.13-31.

Ahmed, A. and Amin, R., 2012. Optimization of power system stabilizer for multi-machine power system using invasive weed optimization algorithm. International Journal of Computer Applications, 975, p.8887.

Ahmed, A. and Amin, B.R., 2012. Performance comparison of invasive weed optimization and particle swarm optimization algorithm for the tuning of power system stabilizer in multi-machine power system. International Journal of Computer Applications, 41(16).

Shahriar, M.S., Ahmed, M.A. and Ullah, M.S., 2012. Design and analysis of a model predictive unified power flow controller (MPUPFC) for power system stability assessment. International Journal of Electrical & Computer Sciences IJECS-IJENS, 12(04).

Hasan, M.R., Hoque, M.A. and Ahmed, A., 2012. A Comprehensive model of SRM in Matlab environment. International Journal of Engineering & Computer Science IJECS-IJENS, 12(04), pp.89-96.

Ahmed, A., Amin, B.R., Islam, K.Z. and Islam, S.M.A., Optimal Design of Power System Stabilizer for Multi-machine Power System Using Differential Evolution Algorithm. Journal of Electrical Engineering The Institution of Engineers, Bangladesh Vol. EE 39, No. I & II, June & December, 2013

Ahmed, A., Al-Amin, R. and Amin, R., 2014. Design of static synchronous series compensator based damping controller employing invasive weed optimization algorithm. SpringerPlus, 3(1), pp.1-17.

Abdullah, S.M. and Ahmed, A., 2020. Hybrid Bare Bones Fireworks Algorithm for Load Flow Analysis of Islanded Microgrids. In Handbook of Research on Fireworks Algorithms and Swarm Intelligence (pp. 283-314). IGI Global.

Shah Ahsanul Haque, Dr. Muhammad R. Islam and Dr. Md. A. Hoque, “Fundamentals of Mobile WiMax- In the view point of Capacity and Bandwidth Calculation”. Book: ISBN: 978-3-639-34488-2. Publisher: VDM Verlag Dr. Muller, Gemany

Islam, Q.N.U. and Ahmed, A., 2020. Optimized controller design for islanded microgrid employing nondominated sorting firefly algorithm. In Nature-Inspired Computation and Swarm Intelligence (pp. 247-272). Academic Press.

Hossain, M.A., Abdullah, S.M., Ahmed, A., Islam, Q.N.U. and Tito, S.R., 2020, December. Optimal Generation Mix of Hybrid Renewable Energy System Employing Hybrid Optimization Algorithm. In International Conference on Intelligent Computing & Optimization (pp. 681-692). Springer, Cham.

Technical and Vocational Education

Abdullahi Binta Suleiman “Technical Vocational Education and Training (TVET) Teachers to Build Skilled Nigeria” Association of Academic Researchers and Faculties (AARF), ISSN (2348-9766) Impact Factor: 5.779, Vol. 6, Issue 5, May 2019

2018. Khan, M. S. H., Adamu, I., Suleman, A. B. “STEM students’ experience on Project Based Learning in Bangladesh” International Conference organized by National Institute of Education (NIE), Nan yang Technological University Singapore, 12 - 14 November

2020. Abdullahi Binta Suleiman. “Quality TVET for skill Readiness.” International Conference on Skills Readiness for Achieving SDGs & Adopting IR 4.0, jointly organized by IDEB & Colombo plan staff collage (CPSC) Dhaka Bangladesh, 02- 04 February

Ibrahim Elsayed Elbushari- Md. Akhtarzzaman. (Identification of the Problems and Prospects in Vocational Education an Training(TVE) of Bangladesh) Asian Journal of Management Sciences and Education(AJMSE) Issue April- 2012, Page 76-89. Website/www.ajmse.leena-luna.co.jp/ajmsevol1n1.php(2)

Islam, M. S. (2012). Entrepreneurship and small enterprise development in Bangladesh: The role of supporting institutions. Germany: Lambert Academic Publishing, ISBN: 978-3-659-27894-5

University student conceptions of M-learning in Bangladesh

M. Rahman, F.A. Haolader and A. A. Khan. Barriers of Implementing the Proposed Competency Based Training Program in TVET Institutions in Bangladesh. International Journal of Engineering Research & Technology (IJERT), Vol. 1 Issue 09, ISSN: 2278-0181, Nov 2012.

F.A. Haolader and Kasagga Usama. ICT Competence of TVET Trainee-teachers: A Case Study in Islamic University of Technology. International Journal of Engineering Research & Technology (IJERT), Vol. 1 Issue 09, ISSN: 2278-0181, November- 2012.

F.A. Haolader and R. Nickolaus. Technical and Vocational Education and Training- Curricula Reform Demand in Bangladesh. An Empirical Study of the Curricula of the Diploma-in-Engineering Programme in Bangladesh and the German Initial Vocational Training in the Dual System and the Curricular Effects. Journal of Systemics, Cybernetics and Informatics (SCI). Orlando, Florida, ISSN 1690-4524, Volume 10, Number 4, Pages 36-40, Year 2012.

F.A. Haolader and D. K. Paul. The Present Status of Polytechnic Curriculum and Student Assessmet Approach in Bangladesh. Asian Journal of Management Sciences & Education. Oyama, Japan. ISSN:2186-845X, ISSN:2186-8441 Print., Vol. 2, Nr. 1 January 2013.

A. Guma, F.A. Haolader & M. Khushi. The Role of ICT to Make Teaching-Learning Effective in Higher Institutions of Learning in Uganda. Intl. Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), ISSN: 2319-8753, Vol.2/ 8, p. 4061– 4073, Aug 2013.

B. Ayub, F.A. Haolader and M. Rahman. The Influence of ICT Security to Academic Environment at Universities, Case Study Uganda. International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), ISSN: 2319-8753, Vol 2/11, November 2013.

F.A. Haolader, M. R. Ali and K. M. Foysol. The Taxonomy for Learning, Teaching and Assessing: Current Practices at Polytechnics in Bangladesh and Its Effects in Developing Students’ Competences. International Journal for Research in Vocational Education and Training, Vol. 2, No. 2: 99-118, ISSN 2197-8646, DOI: 10.13152/IJRVET.2.2.2, 2015.

F.A. Haolader. Entrepreneurship Education in TVET for Small and Medium Enterprise Development: A Case Study in Bangladesh. Bangladesh Education Journal, Vol. 14, No.2, ISSN 1811 – 0762, Pages 27 – 44, December 2015.

M.M. Baba and F.A. Haolader. An investigation into the factors affecting poor performance of female students in Federal College of Education (Technical), Potiskum. Journal of Nigerian Association of Teachers of Technology JONATT (March, 2017) 12 (1), 67-74 ISSN: 1118-4558 (Print), pp. 67 -74.

F.A. Haolader, W. Hakim, K. Kasim and H.R. Mubarak. A Comparative Study on the Academic Performance of Students in Bachelor’s Degree of Information Technology Having Arts and Science Background in Uganda. World Journal of Educational Research ISSN 2375-9771 (Print) ISSN 2333-5998 (Online), Vol. 4, No. 2, 257 – 273. March 2017, www.scholink.org/ojs/index.php/wjer.

F.A. Haolader, M Sajid, and M. Pavlova. Environmental Aspect in TVET: Current Practices in Automotive Sector in Bangladesh. Journal of Technical Education and Training (JTET). Submitted in 2022 (under review).

K. Taweed, H.R. Mubarak, & F.A. Haolader. Learning Styles of Engineering Students: A Case of an International University in Bangladesh. The International Journal of Learning in Higher Education. Submitted in 2021. (under review).

F.A. Haolader. ‘Engineering Pedagogy for the Professional Development of Teachers in Engineering Education: Current trends in Bangladesh’. International Online Alumni Workshop „Engineering Education and Entrepreneurship for Sustainable Development” organized by the Technische Universität Dresden, the Universität Leipzig and DAAD held on 1st December 2020.

F.A. Haolader. 'Outcome Based Education: Constructing Course Outcomes”. International Webinar on ‘Blended learning for achieving Outcome Based Education’ organized by TVE Department, Islamic University of Technology (IUT), Gazipur, Bangladesh, held on 5 Dec 2020.

F.A. Haolader, K. M. Foysol and D. Cicioglu. 'Teacher Education for TVET in Bangladesh: Qualification Requirements, Deficits and Current Initiatives'. International Conference on ‘Skills Readiness for Achieving SDGs & Adopting IR 4.0’ held on 2 - 4 February 2020 in Dhaka, BD.

F.A. Haolader. ‘Promoting SMEs through Personnel Development: A Case Study of Catering Service Sector in Bangladesh’. Intl. Alumni Workshop on ‘Organizational and Personnel Development for the Improvement of Value Chains in the Agricultural Sector and the Food Industry’ in Bishkek, Kyrgyzstan, from October 28 to November 2, 2019.

Shamim, M.R.H., Mamun M.A.A., and Raihan, M. A. (June, 2021). The paper titled: “STEAM Teachers’ pedagogical beliefs about online teaching amidst the COVID-19 pandemic: The Bangladesh Context” in the international conference organized by the Australian Association for Research in Education (AARE), June 2021.

Raihan, M.A. (December, 2020). Worked and contributed Keynote Speech as a Manager of the International webinar on: "Blended Leaning for Achieving OBE". Organized by the TVE Department of IUT in December 2020.

Raihan, M.A. (January, 2021). Presented a paper on “Collaboration opportunities among TVET stakeholders towards building resilient system” presented the topic in the international workshop on “Emerging challenges in TVET sector and capacity development trends in OIC member states” organized by SESRIC Turkey, OIC on 11-14 January 2021.

Raihan M.A. (February, 2021). Presented a paper titled “Art of Teaching” in the foundation training program for the teachers’ on “Teaching methodologies and classroom communication during COVID-19 period”. The training program has organized by the Badshah Faisal Institute School and College, Dhaka on 02-03 February 2021.

Raihan M.A. (February, 2021). Participated and presented a paper as a Resource Person (Panelist) on “Strengthening private sector involvement in skills development” in the webinar on “Role of the private sector in skills development and the ways & means of strengthening public-private partnership to achieve more efficient TVET systems for the OIC member countries”, organized by SESRIC Turkey, OIC on 11-12 February 2021. Retrieved from: https://www.youtube.com/watch?v=GLCCx5MVGmI

Raihan M.A. (July, 2021). Presented a paper titled “Quality of Teaching: Focus on different teaching methods in light of OBE”, the topic has presented in the "Foundation Training Program for Newly Appointed Faculty Members at IUT", organized by the office of Accreditation and Quality Assurance (AQA), IUT, on 11-12 July 2021

Worked as a technical trainer to provide “12th Departmental Foundation Training” as a part of compulsory foundation of ToT on “Educational Resource Management, and TVET Leadership and Team-building” to the trainees passed in the BCS (TE) Examination. The training program was organized by the BIAM Foundation, 63 New Eskaton, Dhaka-1217, November 2021.

With the ref. no. CORE/026/2021 engaged in the “Consultancy Service” for Curriculum Development (of the DTE, BScTE, PGDTE and Modular courses) Project for the Dhaka Technical Teachers’ Training Institute (DTTTI), Dhaka. The offer was received from the Centre for Occupational Research and Education (CORE), Dhaka, Bangladesh then its officially acknowledged and approved by IUT on 5 November 2021.

Worked as a trainer to provide “12th Departmental foundation training” on “Pedagogy: Context of ToT, and SWOT Analysis on the Educational Institutions” to the trainees whose are passed in the BCS Examination. The training program was organized by the BIAM Foundation Regional Center, Shahjn Beach, Jhautala Sea Beach Road, Diabatic Point, Cox’s Bazar, November 2021.

Worked as a “Mentor” in the Training Program on “Empowering Women and People with Disabilities through Skills Training on Computer Graphics Design (CGD) during COVID-19 Pandemic”, Organized by the TVE Department and the Program was funded by the Australia Award Program Bangladesh, October 2021.

Presented the article titled “TVET in world view and way forward: Context of IR 4.0” as a keynote speaker in the seminar theme “Skills-based Technical Education: Improvement Opportunities, Challenges and Way Forward”. The Seminar was funded by the Government of Bangladesh (GoB) and organized by the Jashore Polytechnic Institute (JPI), on 26 December 2021.

As per office order no. 57.03.0000.016.14.042.22 (Part-2)-307, received an invitation and attended in the “Policy making workshop” entitled “Technical Teachers’ for the Future (TTF)” organized by the Directorate of Technical Education (DTE) and the program was presided by the DG Technical Education as chief guest on 18 May 2022.

Attended in the “Policy making workshop” entitled “Establishing Engineering College in each District of Rajshahi, Khulna, Chittagong, and Rangpur” organized by the Directorate of Technical Education (DTE), the program Chief Guest was Md. Kamal Hossain, Secretary TMED (Technical and Madrasha Education Division) and, Presided by the Chairman Bangladesh Technical Education Board (BTEB). The program special guest was Dr. Md. Omar Faruque, DG Technical Education which was held in the DTE on 30 May 2022.

As the technical and curriculum expert, participated and contributed in the “Validation Workshop for Curriculum Development of DTTTI” of the programs DTE, BScTE, PGDTE, for CE, EEE, CSE, ME&SB, AE&MT, RAC, T&G, F&A Department; Venue: SFMMTTC, Conference Room, Dhaka where the Chief Guest was Md. Shahidul Alam NDC, Director General BMET, Chair Mr. Abdur Rafique, Chairman CORE and Ex-DG, DTE. The program was organized by the Center for Occupational Research and Education (CORE) on 21-28 on May 2022.

Raihan M.A. (February, 2021). Attended and contributed to the seminar on “Skills and Technical Education for Economic Transformation of Bangladesh by 2041”, organized by the Directorate of Technical Education (DTE), Technical and Madrasah Education Division (TMED), Ministry of Education, the program was arranged by the Accelerating and Strengthening Skills for Economic Transformation (ASSET) Project dated 11 February 2023

Raihan M.A. (March, 2023). As an academic expert, presented the “Keynote” on the seminar “Competency-Based TVET Education to Boost Youth Employability”, organized by the placement cell of the Graphic Arts Institute. (Office order no. 37.03.2650.302.32.004.23-134), Dhaka, dated 21 March 2023

Raihan M.A. (June, 2023). Presented the “Keynote” entitled “A framework on Panorama of TVET for Deconstruction of the SMART Bangladesh” in the seminar on “Skills Competition 2023”, under the ASSET project organized by the Jashore Polytechnic Institute (JPI) to an integral part of the “Technical and Scholarship Education Week 2023”, Jashore, dated 16-17 June 2023

Raihan M.A. (July, 2023). Presented the webinar “Keynote” entitled “Digital Competence and the Future of TVET in the OIC Member Countries”, as TVET expert and the country representative in the workshop on “Digitalization of TVET: Challenges and Opportunities for the OIC Member Countries” organized by the SESRIC, Republic of Turkey 18-19 July 2023

Dr. Che Cum Celement,Ibrahim Elsayed Elbushari. (Technical/Technological Education and Socialization). August 2012. Vol,1. No.3 Asian Journal of management and Education(AJMSE).

Rushedul H. Shamim, Ibrahim Elsayed Elbushari, Prof Dr. Che Kum Celement. Paper Title “Study on Psychological Based EffectTeaching-learning Process and class room management in Technical and Vocational Institutions”. (Asian Journal of Management and Education (AJMSE).

Dr. Md. Abu Raihan, Nusrat Armin,Ibrahim Elsayed Elbushari. (Prospect of Tourism Industries in Bangladesh: Contest of New Vocationalism)(International Journal of Engineering & Technical Research)(IJETR)June 2014. Paper ID.IJETR/0/2/2005. www.erpublication.org

International Work-Shop on ( Issues,Trends, and Horizons of Technical &Vocational Education And Training (TVET) in OIC Member Countries. From 25-28. IUT.OIC. Dhaka. Bangladesh.

Computer Science and Engineering

Ahmed Shohel, Sungjoon Park, Jason J. Jung, Sanggil Kang, “A Personalized URL Re-ranking Method using Psychological User Browsing Characteristics”- Journal of Universal Computer Science, vol. 15, no. 4 (2009), 926-940.

Nuraini Jamil, Ahmed Shohel, Kangseok Kim, and Sanggil Kang, “Adaptive Scene Classification based on Semantic Concepts and Edge Detection”- Journal of Intelligence and Information Systems, vol.15, no. 2 (2009), pp.1-13.

Ahmed Shohel, Pyungkwan Ko, Ju-wan Kim, Young-Kuk Kim, Sanggil Kang, “An Enhanced Recommendation Technique for Personalized E-Commerce Portal” in Second International Symposium on Intelligent Information Technology Application (IITA 2008), pp . 196-200.

Mohayeminul Islam, Tajkia Rahman Toma, Md. Selim, Alim Ul Gias and Shah Mostafa Khaled. "Design Migration from Procedural to Object Oriented Paradigm by Clustering Data Call Graph". International Journal of Information Engineering and Electronic Business (IJIEEB). 13 pages, 2016.

Tajkia R. Toma, Mohayeminul Islam, Mohammad Shoyaib and Md. Shariful Islam. "A Dependency Graph Generation Process for Client-side Web Applications". International Journal of Information Engineering and Electronic Business (IJIEEB). 13 pages, 2015.

Tajkia Rahman Toma and Md. Shariful Islam. "An Efficient Mechanism of Generating Call Graph for JavaScript using Dynamic Analysis in Web Application". International Conference on Informatics, Electronics & Vision (ICIEV). 6 pages, 2014.

Md. Selim, Md. Saeed Siddik, Tajkia Rahman, Alim Ul Gias and Shah Mostafa Khaled. "Approximating Object based Architecture for Legacy Software Written in Procedural Languages using Variable Neighborhood Search". International Conference on Software, Knowledge, Intelligent Management and Applications (SKIMA). 8 pages, 2014.

M. Moniruzzaman, A. Bagirov, and I. Gondal, “Partial undersampling of imbalanced data for cyber threats detection,” in Proceedings of the Australasian Computer Science Week Multiconference, ACSW ’20, (New York, NY, USA), Association for Computing Machinery, 2020

M. Moniruzzaman, A. Bagirov, I. Gondal, and S. Brown, “A server side solution for detecting webinject: A machine learning approach,” in Trends and Applications in Knowledge Discovery and Data Mining (M. Ganji, L. Rashidi, B. C. M. Fung, and C. Wang, eds.), (Cham), pp. 162–167, Springer International Publishing, 2018

M. H. Ashmafee, T. Ahmed, S. Ahmed, B. Hasan, N. Jahan, and A. Rahman, “An Efficient Transfer Learning-based Approach for Apple Leaf Disease Classification,” 3rd International Conference on Electrical, Computer and Communication Engineering (ECCE 2023), Dhaka, 2023.

R. Rahman, A. A. Farhad, R. Hasan, M. T. Lashkar, M. H. Ashmafee, and A. R. M. Kamal, “ChartSumm: A Large Benchmark for Automatic Chart Summarization,” 36th Canadian Conference on Artificial Intelligence (CANAI 2023), 2023.

M. K. A. H. Sumon, M. H. Ashmafee, M. R. Islam, and A. R. Mostofa Kamal “Explainable NLQ-based Visual Interactive System: Challenges and Objectives,” 2nd International Conference on Computing Advancement (ICCA), 2022

R. Jany, M. H. Ashmafee, I. Hussain, and M. A. Hossain, “SleepExplain: Explainable Non-Rapid Eye Movement and Rapid Eye Movement Sleep Stage Classification from EEG Signal,” presented at the 25th International Conference on Computer and Information Technology (ICCIT), Cox’s Bazar, 2022

M. R. Islam, J. Zhang, M. H. Ashmafee, I. Razzak, J. Zhou, X. Wang, and G. Xu, “ExVis: Explainable Visual Decision Support System for Risk Management,” BESC 2021: The 8th International Conference on Behavioural and Social Computing, 2021

ABM Rahman, M Hasan, S Ahmed, M. H. Ashmafee, MR Kabir, H Kabir, “Two Decades of Bengali Handwritten Digit Recognition: A Survey,” IEEE Access, vol. 10, pp. 92597–92632, 2022, doi: 10.1109/access.2022.3202893.

Civil & Environmental Engineering

154) T. Nakai, K. Kaneda, H. Takahashi, and H.M. Shahin (2024): Improvement of the evolution rule of state variable in Subloading tij model, Proc. of the 59th Japan national conference on geotechnical engineering, Asahikawa, Japan, July

156) M. A. Ullah, H. M. Shahin, S. R. Sabab and H. M. Ashik (2025): Predicting the shear strength parameter of cohesionless soil using machine learning techniques, Engineering Research Express Journal, https://doi.org/10.1088/2631-8695/add858

M. A. Ullah, H. M. Shahin, S. R. Sabab and H. M. Ashik (2025): Predicting the shear strength parameter of cohesionless soil using machine learning techniques, Engineering Research Express Journal, https://doi.org/10.1088/2631-8695/add858

Mohammed, T. U., Masud, M. M. U., (2019). Effects of Aggregate and Cement Types on Mechanical Properties and Carbonation of Concrete, Journal of Civil Engineering (IEB), 47(2), pp. 155-166, 2019.

Mohammed, T. U., Shikdar, M. K. H., Joy, J. A., (2019). Shear Strength of RC Beams Made with Brick Aggregate without Shear Reinforcements, Journal of Civil Engineering (IEB), 47(1), pp. 31-45, 2019.

Mohammed, T. U., Hamada, H., Yamaji, T., (2019). Long-Term Durability of Concrete Made with Slag Cements under Marine Environment, ACI Materials Journal, Vol. 116, No. 5, pp. 5-16, September 2019.

Mohammed, T. U., Shikdar, M. K. H., Awal, M. A., (2019). Shear Strength of RC Beam Made with Recycled Brick Aggregate, Journal of Engineering Structures, Vol. 189, pp. 497-508, 2019, https://doi.org/10.1016/j.engstruct.2019.03.093.

Mohammed T. U., Hossain, M. B., Chakraborti, P., Taher, R. M. A., and Islam, M. M., (2018). Making High Strength Concrete using Maddhapara Hard Rock as Coarse Aggregate, Journal of Civil Engineering (IEB), 46(2), pp. 97-108, 2018.

Mohammed, T. U., Hossain, M. B., Chakraborti, P., Taher, R. M. A., and Islam, M. M. (2018). Making High Strength Concrete Using Maddhapara Hard Rock as Coarse Aggregate, Journal of Civil Engineering (IEB), 46 (2), pp. 97-108, 2018.

Mohammed, T. U., Ahmed, T., Apurbo, S. M., Mallick, T. A., Shahriar, F., Munim, A., Awal, M. A., (2017). “Influence of Chemical Admixtures on Fresh and Hardened Properties of Prolonged Mixed Concrete”, Advances in Materials Science and Engineering, Volume 2017, Article ID 9187627, December 2017, http://doi.org/10.1155/2017/9187627.

Mohammed, T. U., Das, H. K., Mahmood, A. H., Awal, M. A., and Rahman, N. (2017). “Flexural Performance of RC Beams Made with Recycled Brick Aggregate”, Construction and Building Materials, Elsevier, Volume 134, pp. 67-74, http://dx.doi.org/10.1016/j.conbuildmat.2016.12.135.

Mohammed, T. U., Mahmood, A. H., Kamal, M. R. I., Yashin, S. M., Zihan, Z. U. A. (2017). “Effect of Maximum Size of Brick Aggregate on Properties of Concrete”, Construction and Building Materials, Elsevier, Volume 134, pp. 713-726, DOI: 10.1016/j.conbuildmat.2016.12.164.

Mohammed, T. U., Rahman, M. N. (2016). “Effect of Types of Aggregate and Sand-to-Aggregate Volume Ratio on UPV in Concrete, Construction and Building Materials, Elsevier, Volume 125, October 2016, pp. 832-841, http://dx.doi.org/10.1016/j.conbuildmat.2016.08.102.

Mohammed, T. U., Mahmood, A. H., (2016). “Effects of Maximum Aggregate Size on UPV of Brick Aggregate Concrete”, Journal of Ultrasonics, Elsevier, Vol. 69, pp. 129-136, doi:10.1016/j.ultras.2016.04.006.

Mohammed, T. U., Hamada, H., Hasnat, A., Al Mamun, M. A., (2015). “Corrosion of Steel Bars in Concrete with the Variation of Microstructure of Steel Concrete Interface”, Journal of Advanced Concrete Technology (ACT), Japan Concrete Institute (JCI), Vol. 13, pp. 230-240.

Mohammed, T. U., Hasnat, A., Awal, M. A., Bosunia, S. Z., (2015). “Recycling of Brick Aggregate Concrete as Coarse Aggregate”, ASCE Journal of Materials in Civil Engineering, Vol. 27, No. 7, July 2015, CID: B4014005,(doi: http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0001043).

Mohammed, T. U. and Hamada, H., (2008). “Corrosion of Steel Bars in Concrete – Facts from the Long-Term Exposure Tests”, JCI Concrete Journal, Vol. 46, No. 4, pp. 23-26.

Mohammed, T. U. and Hamada, H., (2008). “Healing of Voids, Cracks and Joints in Concrete Exposed under Marine Environment”, JCI Concrete Journal, Vol. 46, No. 3, pp. 25-30.

Mohammed, T.U. and Hamada, H., (2006). “Corrosion of Steel Bars in Concrete with Various Steel Surface Conditions”, ACI Materials Journal, Vol. 103, No. 4, pp. 233-242.

Mohammed, T.U. and Hamada, H., (2006). “Corrosion of Horizontal Bars in Concrete and the Method to Stop Earlier Corrosion”, ACI Materials Journal, Vol. 103, No. 5, pp. 303-311.

Hamada, H., Yamaji, T., Mohammed, T.U., Tori, K., (2006). “Unexpected Expansion of Concrete Made with Laumontite Containing Aggregates under Seawater Condition”, ACI SP 234-36, Ed. Malhotra, V.M., pp. 571-587.

Mohammed, T.U., Hamada, H., (2006). “Corrosion of Steel Bars in Cracked Concrete: Very Beginning to the Early Age of Exposure”, ACI SP 235-7, Ed. Malhotra,V.M., pp. 103-123..

Mohammed, T.U. and Warnitchai, P., (2006). “Nonlinear Behavior of Liquid Sloshing in Rectangular Tanks”, UAP Journal of Civil and Environmental Engineering, The University of Asia Pacific, Dhaka, Bangladesh, Vol. 2, No. 1, pp. 1-8.

Akira, O., Hamada, H., Nobuaki, O., and Mohammed, T.U., (2005). “Chloride Ingress into Cylindrical Specimens”, JCI Concrete Journal, Vol. 27, No.1, 2005, pp. 613-618.

Hamada, H., Mohammed, T.U., and Yamaji, T., (2005). “Properties of Concrete after 30 Years’ Exposure under Marine Submerged Condition”, Journal of The Society of Materials Science, Japan, Vol. 54, No. 8, August 2005, pp. 842-849.

Mohammed, T.U., Hamada, H., and Yamaji, T., (2004). “Concrete after 30 Years Exposure - Part I: Mineralogy, Microstructures, and Interfaces”, ACI Materials Journal, Vol. 101, No. 1, January-February 2004, pp. 3-12.

Mohammed, T.U., Hamada, H., and Yamaji, T., (2004). “Concrete after 30 Years Exposure – Part II: Chloride Ingress and Corrosion of Steel Bars”, ACI Materials Journal, Vol. 101, No. 1, January-February 2004, pp. 13-18.

Mohammed, T.U., Hamada, H., and Toru Yamaji, (2004). “Performance of Seawater Mixed Concrete in the Tidal Environment”, Cement and Concrete Research Journal, Vol. 34, 2004, pp. 593-601.

Mohammed, T. U. and Hamada, H., (2004). “Long Term Performance of Alumina Cement Mixed with Tap water and Seawater Under Marine Environment”, ACI Materials Journal, Vol. 101, No. 3, May – June 2004, pp. 226-232.

Mohammed, T.U., Hamada, H., Yokota. H., (2004). “Macro-Cell and Micro-Cell Corrosion of Steel Bars in Cracked Concrete Made with Various Cements”, Eighth CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Las Vegas, USA, May 23-29, 2004, ACI SP 221-2, pp. 51-72.

Mohammed, T. U., Hamada, H., and Yokota, H., (2004). “Autogenous Healing, Ingress of Chloride and Sulfate Through Cracks Under Marine Environment”, 7th CANMET/ACI International Conference on Recent Advances in Concrete Technology, Las Vegas, USA, May 26-29, 2004, ACI SP 222-10, pp. 135-154.

Mohammed, T.U. and Hamada, H., (2003). “Relationship Between Free Chloride and Total Chloride in Concrete”, Cement and Concrete Research Journal, Vol. 33, No. 9, 2003, pp. 1487-1490.

Mohammed, T.U. and Hamada, H., Yamaji, T., (2003). “Durability of Concrete Made with Different Water Reducing Chemical Admixtures Under Marine Splash Environment”, ACI SP 217-2, 2003, pp. 17-36.

Mohammed, T.U., and Hidenori, H., (2003). “Relation between Strain on Surface and Strain over Embedded Steel Bars in ASR Affected Concrete Members”, Journal of Advanced Concrete Technology, Japan Concrete Institute, Vol. 1, No. 1, 2003, pp. 76-88.

Mohammed, T.U., Hidenori, H., and Yamaji, T., (2003). “Marine Durability of 30-Year Old Concrete Made with Different Cements”, Journal of Advanced Concrete Technology, Japan Concrete Institute, Vol. 1, No. 1, 2003, pp. 63-75.

Mohammed, T.U., Otsuki, N., and Hamada, H., (2003). Corrosion of Steel Bars in Cracked Concrete Under Marine Environment, ASCE Journal of Materials in Civil Engineering, Vol. 15, No. 5, October 2003, pp. 460-469.

Mohammed, T.U. and Hamada, H., (2003). “Durability of Concrete Made with Different Water Reducing Chemical Admixtures Under Marine Tidal Environment”, ACI Materials Journal, Vol. 100, No. 3,May – June 2003, pp. 194-202.

Mohammed, T.U., Hamada, H., (2003). “Corrosion of Steel Bars in Concrete at Joints Under Tidal Environment”, ACI Materials Journal, Vol. 100, No. 4, July–August 2003, pp.265-273.

Mohammed, T.U., Hamada, H., and Yamaji, T., (2003). “Alkali-Silica Reaction-Induced Strains over Concrete Surface and Steel Bars in Concrete”, ACI Materials Journal, vol. 100, No. 2, March –April 2003, pp. 133-142.

Mohammed, T.U., Hamada, H., and Otsuki, N., (2003). “Several Factors Regarding Sustainability of Concrete Structures Under Marine Environment”, ACI SP 212-3, June 2003, pp.23-40 (presented in opening plenary session of CANMET/ACI International Conference on Durability of Concrete, Thessalonoki, Greece, 2003).

Mohammed, T.U., Hamada, H., (2003). “Micro-cell and Macro-cell Corrosion of Steel Bars in Concrete with Various Joints Under Atmospheric Environment”, ACI SP 212-17, June 2003, pp. 259-278.

Mohammed, T.U., Yamaji, T., Aoyama, T., and Hamada, H., (2002). “Marine Durability of 15-Year Old Uncracked and Precracked Concrete Made with Different Cements”, Concrete Library International of JSCE, No. 40, December 2002, pp. 295-309. (reprinted from Journal of Materials, Concrete Structures and Pavements, JSCE, No. 697/V-54, February 2002).

Mohammed, T.U., Yamaji, T., and Hamada, H., (2002). “Chloride Diffusion, Microstructures and Mineralogy of Concrete after 15 Years of Exposure in the Tidal Environment”, ACI Materials Journal, Vol. 99, No. 3, May-June 2002, pp. 256 – 263.

Mohammed, T.U., Otsuki, N., Hamada, H., and Toru, Y., (2002). “Chloride-Induced Corrosion of Steel Bars in Concrete with the Presence of Gap at the Steel-concrete Interface”, ACI Materials Journal, Vol. 99, No. 2, March – April, 2002, pp. 149-156.

Hamada, H., Toru, Y., and Mohammed, T.U., and Torii, K., (2002). “Expansive Deterioration of Laumontite Contained Concrete Under Seawater Environments”, Journal of Concrete Research and Technology, JCI, Vol. 13, No. 2, May 2002, pp. 71-78.

Mohammed, T.U., Yamaji, T., Aoyama, T., and Hamada, H., (2002). “Marine Durability of 15-Year Old Uncracked and Precracked Concrete Made with Different Cements”, JSCE Journal of Materials, Concrete Structures and Pavements, No. 697/V-54, February 2002, pp. 201-214.

Mohammed, T.U., Otsuki, N., Hamada, H., (2001). “Oxygen Permeability in Cracked Concrete Reinforced With Plain and Deformed Bars”, Journal of Cement and Concrete Research, Vol. 31, No. 5, 2001, pp. 829-834.

Mohammed, T.U., Yamaji, T., Toshiyuki, A., and Hamada, H., (2001). “Marine Durability of 15-Year Old Concrete Specimens Made With Ordinary Portland, Slag and Fly Ash Cement”, ACI SP 199-30, Volume 2, 2001, pp. 541-560.

Mohammed, T.U., Yamaji, T., Toshiyuki, A., and Hamada, H., (2001). “Corrosion of Steel Bars in Cracked Concrete Made with Ordinary Portland, Slag and Fly Ash Cements”, ACI SP 199-40, Volume 2, 2001, pp. 699-718.

Mohammed, T.U., Otsuki, N., Hisada, M., Tsunenori, S., (2001). “Effect of Crack Width and Bar Types on Corrosion of Steel in Concrete”, ASCE Journal of Materials in Civil Engineering, Vol. 13, No. 3, May – June 2001, pp. 194-201.

Mohammed, T.U., Otsuki, N., and Hamada, H., (2001). “Issues in Designing Durable Structures”, ACI Concrete International, July 2001, pp. 46-48.

Mohammed, T.U., Otsuki, N., Hisada, M., Hamada, H., (2000). “Marine Durability of 23-Year Old Reinforced Concrete Beams”, ACI SP 192-65, June 2000, pp. 1071-1088.

Otsuki, N, Hisada, M., Diola, N. B., Mohammed, T.U., (1999). “Experimental Study on Interfacial Transition Zones in Reinforced Concrete”, Concrete Library of JSCE, No. 33, June 1999, pp. 139-153 (reprinted as an excellent paper from Journal of Materials, Concrete Structures and Pavements, JSCE, No. 592/V-39, May 1998).

Mohammed, T.U., Otsuki, N., and Hisada, M., (1999). “Corrosion of Steel Bars With Respect to Orientation in Concrete”, ACI Materials Journal, Vol.96, No.2, March-April 1999, pp.154-159.

Otsuki, N., Miyazato, S., Shibata, T., Hisada, M., Mohammed, T.U., and Nagataki, S., (1998). “The Influence of W/C on Corrosion Mechanism Near Bending Crack”, Journal of Materials, Concrete, Structures and Pavements, JSCE, No. 606/V-41, November 1998, pp. 63-73.

Otsuki, N, Hisada, M., Diola, N. B., Mohammed, T.U., (1998). “Experimental Study on Interfacial Transition Zones in Reinforced Concrete”, Journal of Materials, Concrete, Structures and Pavements, JSCE, No. 592/V-39, May 1998, pp.155-167.

Mohammed, T. U., Harun, M. Z. B., Joy, J. A., and Ahmed, M. A., (2020). Effect of Sand-to-Aggregate Volume Ratio on Mechanical Properties of Concrete. IABSE-JSCE Joint Conference on Advances in Bridge Engineering – IV, August 26-27, 2020, Dhaka, Bangladesh. ISBN 978-984-34-8313-3.

Mohammed, T. U., Alam, M., Hoque, M., Miraz, M. I., Fuad, M., (2020). Recycling of Concrete as Coarse Aggregate – An Extended Study. IABSE-JSCE Joint Conference on Advances in Bridge Engineering – IV, August 26-27, 2020, Dhaka, Bangladesh. ISBN 978-984-34-8313-3.

Mohammed, T. U., Masud M. M. U., Rahman M,, and Mamun M. A. A, (2019). Effects of Cement Types on Chloride Ingress in Concrete, The 3rd ACF Symposium on “Assessment and Intervention of Existing Structures”, Hokkaido University, Sapporo, Japan, September 10-11, 2019.

Mohammed, T. U. and Masud M. M. U., (2019). Effects of Aggregate and Cement Types on Carbonation of Concrete : Accelerated Carbonation Test, The 3rd ACF Symposium on “Assessment and Intervention of Existing Structures”, Hokkaido University, Sapporo, Japan, September 10-11, 2019.

Mohammed, T. U., Hossain, K. I., Anik, M. I., Miraz, I, H., Ahmed, T., Awal, M. A., (2019). Recycling of Concrete Made with Brick Aggregate : An Extended Study, Paper ID IDSCMT501, 5th International Conference on Sustainable Construction Materials and Technologies (SCMT5), Kingston University, London, July 14-17, 2019.

Mohammed, T. U., Hassan, M., Rahman, M. N., Apurbo, S. M., (2019). Brick Fine Aggregate and Ladle Furnace Slag as Alternative to Natural River Sand, Paper ID IDSCMT5077, 5th International Conference on Sustainable Construction Materials and Technologies (SCMT5), Kingston University, London, July 14-17, 2019.

Mohammed, T. U., Mahmood, A. H., Ahmed, S. S., Pasha, M,. (2019). Clay-Burnt Coarse Aggregate : Production and Utilization in Concrete, 5th International Conference on Sustainable Construction Materials and Technologies (SCMT5), Paper ID IDSCMT5137, Kingston University, London, July 14-17, 2019.

Mohammed, T. U., Yashin, S. M., Masud, M. M. U., (2018). Effects of Aggregate and Cement Type on Carbonation of Concrete : Accelerated Carbonation Test for 28 Days, The 3rd International Symposium on Concrete and Structures for Next Generation, Kasetsart University, Bangkok, Thailand, February 4-5, 2018.

Mohammed, T. U., Ahmed, T., Mallick, T. A., Shahriar, F., and Munim, A., (2017). Influence of Chemical Admixtures on Fresh and Hardened Properties of Ready Mix Concrete, 1st International Conference of Engineering Research and Practice, Dhaka, Bangladesh, February 4-5, 2017.

Mohammed, T. U., Noor, M. A., Apurbo, S. M., Ahmed, M., Elahi, A., and Mazumder, M. H., (2017). Utilization of Induction Furnace Slag in Concrete as Coarse Aggregate, 1st International Conference of Engineering Research and Practice, Dhaka, Bangladesh, February 4-5, 2017.

Mohammed, T. U., Mahmood, A. H., Chowdhury, I. M., Humayun, A. M., Ahmed, T (2016). Sustainability of Construction Materials in Bangladesh, 4th International Conference on Sustainability of Construction Materials and Technologies (SCMT4), Paper No. S182, Las Vegas, USA, August 7 – 11, 2016.

Mohammed, T. U., Rahman, M. N., Mahmood, A. H., Hasan, T, Apurbo S. M., (2016). Utilization of Steel Slag in Concrete as Coarse Aggregate, 4th International Conference on Sustainability of Construction Materials and Technologies (SCMT4), Paper No. S184, Las Vegas, USA, August 7 – 11, 2016.

Mohammed, T. U., and Hassan, M., (2015). Utilization of Brick Fine Aggregate in Concrete, International Conference on Regeneration and Conservation of Concrete Structures (RCCS), June 1-3, 2015, Nagasaki, Japan, CD Proceedings, Paper No. I-21, pp. 1-11.

Mohammed, T. U., Khan, A. Z., and Mahmood, A. H., (2015). Recycling of Demolished Concrete as Coarse and Fine Aggregate, International Conference on Regeneration and Conservation of Concrete Structures (RCCS), June 1-3, 2015, Nagasaki, Japan, CD Proceedings, Paper No. I-22, pp. 1-12.

Mohammed, T. U., and Chowdhury, I. M. (2014). Sustainable Development of Concrete Construction Materials in Bangladesh, Proceedings of the 1st IUT International Seminar on Sustainability, Recycling, and Durability of Concrete, December 8, 2014, IUT, Gazipur, Bangladesh, pp. 24-38.

Mohammed, T. U., and Ahmed, T., (2014). Influence of Some Factors on Workability and Compressive Strength of RMC in Bangladesh, Proceedings of the 1st IUT International Seminar on Sustainability, Recycling, and Durability of Concrete, December 8, 2014, IUT, Gazipur, Bangladesh, pp. 39-49.

Mohammed, T. U., Ahmed, S. S., and Pasha, M. M. (2014). Production of Clay Burnt Coarse Aggregate for Concrete, Proceedings of the 1st IUT International Seminar on Sustainability, Recycling, and Durability of Concrete, December 8, 2014, IUT, Gazipur, Bangladesh, pp. 91-100.

Mohammed, T. U., and Hasnat, A. (2014). Modulus of Rupture of Concrete Made with Recycled Brick Aggregate, Proceedings of the 6th International Conference of Asian Concrete Federation (ACF), Seoul, South Korea, September 21 – 24, 2014, pp. 1118-1123.

Mohammed, T. U., Hasnat, A., Awal, M. A., and Shamim Z. Bosunia (2013). Recycling of Brick Aggregate Concrete: Physical and Mechanical Properties, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18 ~ 21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 202.

Mohammed, T. U., Hasnat, A., Awal, M. A., , and Shamim Z. Bosunia (2013). Recycling of Brick Aggregate Concrete: An Extended Study on Some Key Issues, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18~21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 203.

Mohammed, T. U., (2013). Sustainable Development of Concrete Construction Works in Bangladesh, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18~21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 205.

Mohammed, T. U., Hamada, H., Mamun, A. A., and Hasnat, A., (2013). Corrosion of Cement Paste Coated Steel Bars in Marine Environment, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18~21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 206.

Mohammed, T. U., Mohammad, N. I., Sutradhar, S. K., Chowdhury, M. H. R., Hasnat, A, Khatib, J. M., (2013). Carbonation Coefficient of Concrete in Dhaka City, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18~21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 208.

Mohammed, T. U., Hasan, P., Islam, B. K. M. A., Hasnat, A., Sharkia, S., (2012). Investigation on Different Cement Brands Commonly Used in Banglade4sh, Proceedings of the Third International Conference on Construction in Developing Countries, ICCIDC III, pp. 554-559, July 4 – 6, 2012, Thailand.

Hasnat, A., Mohammed, T. U., Hossain, M. N., Rahman, N., Hamada, H., (2012). Investigation on Pervious Concrete Made with Locally Available Materials, Proceedings of the Third International Conference on Construction in Developing Countries, ICCIDC III, pp. 548-553, July 4 – 6, 2012, Thailand.

Sarwar, N., Mohammed, T. U., Bosunia, S. Z., Khatib, J., (2012). Development of High Strength Concrete in Bangladesh, Proceedings of the Third International Conference on Construction in Developing Countries, ICCIDC III, pp. 560-566, July 4 – 6, 2012, Thailand.

Mohammed, T. U., Hasnat, A., Sarwar, N., Das, H. K., Awal, M. A., (2011). Recycling of Demolished Concrete, Proceedings of the International Conference on Structural Engineering, Construction, and Management, 16-18 December, 2011, Kandy, Sri Lanka, pp. 77-85.

Mohammed, T. U., Recycling of Demolished Concrete (2011). Research report published in the 2nd UAP/SEL Seminar on Recycling of Demolished Concrete, IEB HQ, Dhaka, Bangladesh, December 14, 2011.

Mohammed, T. U., Hasnat, A., Sarwar, N., Das, H. K. D., Miah, M. J., Awal, M. A. (2011). Sustainable Development of Construction Works in Bangladesh, Proceedings of the 3rd European Asian Civil Engineering Forum International Conference, September 2011, Indonesia.

Mohammed, T. U., Hasnat, A., Awal, M. A., (2011). Recycling of Demolished Concrete, ICCMC Meeting, 20 June 2011, Hong Kong University of Science and Technology (HKUST), http://iccmc.org/hongkong2011/Item_15_Recycling.pdf.

Mohammed, T. U., Kabir, M. R., Awal, M. A., Kayes, I., Miah, M. J. (2010). Poster presentation at Asian Network for Quality (ANQ) Conferences, October 2010, India.

Mohammed, T. U., Khan, F. A., Kabir, M. R., Awal, M. A., Mahbub, A. A, Hamada, H., and Khatib, J. M., (2010). “Recycling of Concrete Made with Brick Aggregate”, Proceedings of the 2nd International Conference on Sustainable Construction Materials and Technologies, June 28 – June 30, 2010, Universita delle Narche, Ancona, Italy, Vol. 2, pp. 949 - 960.

Khatib, J.M., Mohammed, T.U., J. S., Zhang, Hamada, H., (2010). “A New Generation Water Reducing Admixture for Concrete”, Proceedings of the 2nd International Conference on Sustainable Construction Materials and Technologies, June 28 – June 30, 2010, Universita delle Narche, Ancona, Italy, Vol. 2, pp. 939-948.

Zhang, J. S., Khatib, J. M., Mohammed, T. U., Harris, P., and Booth, C., (2009). “Can Wheat Husk Ash Waste be Used in Producing Sustainable Construction Materials”, Proceedings of the 8th Annual International Conference, Sustainable Aggregates, Pavement Engineering & Asphalt Technology, Design Construction, Management, Performance and Rehabilitations, 18th - 19th February 2009, Liverpool, UK, Paper No. 21, pp 1-10.

Khatib, J. M., Mohammed, T. U., Kayali, O., Bougara, A., (2009). “Non-Destructive Testing for Concrete with Metakaolin Cured at Low Temperature”, Proceedings of the International Symposium on Innovation & Sustainability of Structures in Civil Engineering, South China University of Technology. Guangzhou, China, Volume 1, Editor Li, J., Wu, B., Wu, Z., Wang, Z., and Ji, J., 2009, pp. 171-175.

Mohammed, T.U., Awal, M. A., Mahbub, A. A., Mohammed, R. H., (2007). “Recycling of Demolished Concrete as Coarse Aggregate”, Proceedings of the ACBM/ACI International Conference on Advances in Cement Based Materials and Applications to Civil Infrastructure, Editors. Rizwan, S. A. and Ghaffar A., Vol. 2, A-One Publisher, Lahore, Pakistan, 2007, pp. 1077-1090.

Mohammed, T.U., Hamada, H., Yokota, H., Khatib, J. M., (2007). “ASR Expansion of Concrete Beams with Various Restrained Conditions – 1500 Days of Marine Exposure”, Proceedings of the ACBM/ACI International Conference on Advances in Cement Based Materials and Applications to Civil Infrastructure, Editors. Rizwan, S. A. and Ghaffar A., Vol. 1, A-One Publisher, Lahore, Pakistan, 2007, pp. 441-456.

Mohammed, T.U. (2007). “Bangladesh – Sustainable Development of Concrete Technology”, Proceedings of the CBM-CI – International Workshop, Editor. Ahmad, S., December 2007, Karachi, Pakistan, pp. 249-267.

Mohammed, T. U., and Hamada, H. (2006). “Corrosion of Steel Bars in Cracked Concrete at the Early Age of Exposure”, Proceedings of the International Workshop on Life Cycle Management of Coastal Concrete Structures, Nagaoka, Japan, Ed. Yokota, H., and Shimomura, T., pp. 115-126.

Yamaji, T., Mohammed, T. U., and Hamada, H. (2007). “Study on a Simple Factor on the Deterioration of Concrete Submerged in Seawater for Long Term”, Technical Note of Port and Airport Research Institute (PARI), Yokosuka, Japan, No. 1150, pp. 1-20.

Hamada, H., Yokota, H., Yamaji, T., and Mohammed, T. U., (2006). “Long-term Exposure Test of Concrete Materials under Marine Environments carried out by PARI” , Proceedings of the International Workshop on Life Cycle Management of Coastal Concrete Structures, Nagaoka, Japan, pp. 31-36.

Akira, Y., Yamaji, T., Yokota, H., Hamada, H., Mohammed, T.U., (2006). “Influence of the Pore of the Steel-Concrete Interface on the Corrosion of Steel Bars due to Chloride Attack”, Proceedings of the International Workshop on Life Cycle Management of Coastal Concrete Structures, Nagaoka, Japan, pp. 145-150, 2006.

Mohammed, T.U., Hamada, H., (2006). “Making Sustainable Concrete for Marine Exposure”, Supplementary volume of the 7th CANMET/ACI International Conference on Durability of Concrete, Montreal, Compiled by : Gupta, P., abd Gupta, P., ACI, pp. 295-314.

Mohammed, T.U., Hamada, H., (2006). “Robust Performance of Slag Cement Under Marine Exposure”, Proceedings of the 7th CANMET/ACI International Conference on Durability of Concrete, Volume - Kenji Sakata Symposium on Properties of Concrete, Ed. Bremner, T.W., pp. 101-126.

Mohammed, T.U., Hamada, H., Mohammed, A.A.M., Mohammed, M.R., (2005). “ASR Induced Expansion of Concrete Beams with Various Restrained Conditions”, Proceedings of the Third Annual Paper Meet and International Conference on Civil Engineering, Editors: Safiullah, A.M.M., Ali, M.A., Ahmed, B., Noor, M.A., and Amin, A.F.M.S., IEB HQ, Ramna, Dhaka, Bangladesh, pp. 307-320, 2005.

Mohammed, T.U., Hamada, H., Rashid, A.A.M., Mohammed, A.A.M., (2005). “Marine Durability of Concrete Made with OPC and Slag Cement”, Proceedings of the Third Annual Paper Meet and International Conference on Civil Engineering, Editors: Safiullah, A.M.M., Ali, M.A., Ahmed, B., Noor, M.A., and Amin, A.F.M.S., IEB HQ, Ramna, Dhaka, Bangladesh, pp. 321-329, 2005.

Hamada, H., Yamaji, T., Mohammed, T.U., Tori, K., (2005). “Unexpected Expansion of Concrete Made with Laumontite Containing Aggregates under Seawater Condition”, Proceedings of 2nd International Conference on Concrete & Development, April 30 – May 2, 2005, Tehran, Iran, Editors Heidarinejad, G., and Tasnimi, A.A., Ministry of Housing and Urban Development and Building and Housing Research Center, CD5-001. pp. 1-10, 2005.

Hamada, H., Mohammed, T.U., Yamaji, T., and Tori, K., (2004). “Deterioration of Concrete Made with Laumontite Containing Aggregates”, International RILEM Symposium on Advances in Concrete through Science and Engineering, 22-24 March 2004, CD ROM, Evanston, Illinois, USA.

Hamada, H., Yamaji, T., Mohammed, T.U., Hirasaki, T., and Komure, K., (2003). “An Experimental Investigation on Factors Affecting Corrosion of Steel Bars in Concrete”, Technical Note of the Port and Airport Research Institute, March 2003, No. 1040, Yokosuka, Japan.

Mohammed, T.U., Hamada, H., Yamaji, T., and Yokota, H., (2004). “ASR Expansion of Concrete Beams with Various Restrained Conditions – Results till 612 Days of Exposure”, Proceedings of the 12th International Conference on Alkali-Aggregate Reaction in Concrete (ICAAR), Beijing, China, October 15-19, 2004, pp. 1169-1180.

Yamaji, T., Mohammed, T.U., Hamada, H., and Iwanami, M., (2004). “Durability of a 30-Year Old Reinforced Concrete Wharf Under Marine Environment”, Proceedings of the Fourth International Conference on Concrete Under Severe Conditions: Environment and Loading, CONSEC’04, Seoul. Korea, Eds. B. H. Oh et al., 2004, pp. 141-148.

Hamada, H., Hirasaki, T., Yamaji, T., and Mohammed, T.U., (2004). “An Experimental Study on Factors Affecting Electro-Chemical Measurements of Steel Bars in Concrete”, Concrete Research and Technology, Vol. 15, No. 1, January 2004, pp. 57-68.

Hamada, H., Mohammed, T.U., Yamaji. T., and Komure, K., (2003). “An Experimental Study on Application of Surface Coating to ASR-Affected Concrete”, Proceedings of the Concrete Structure Scenarios, Japan Society of Materials Science (JSMS), Vol. 3, October 2003, pp. 37-44.

Mohammed, T.U., and Hamada, H., (2003). “Corrosion of Horizontally Oriented Steel Bars in Concrete and the Method to Improve the Steel-Concrete Interface”, Proceedings of the Concrete Structure Scenarios, Japan Society of Materials Science (JSMS), Vol. 3, October 2003, pp. 305-312.

Mohammed, T.U., Hamada, H., and Yamaji, T., (2003). “Long-term Durability of Concrete Made with Slag Cements Under Marine Environment”, Report of the Port and Airport Research Institute, Yokosuka, Japan, Vol. 42, No. 2, June 2003, pp. 155-191.

Mohammed, T.U., Hamada, H., and Yamaji, T., (2003). “Concrete Properties and Relationship Between Surface Strain and Strain Over the Embedded Steel Bars of ASR Affected Concrete Members”, Report of the Port and Airport Research Institute, Yokosuka, Japan, Vol. 42, No. 2, June 2003, pp. 133-153.

Hamada, H., Mohammed, T. U., Yamaji, T., and Komure, K., (2003). “An Experimental Investigation on Application of Surface Coating to ASR-Occurred Concrete”, Technical Note of the Port and Airport Research Institute, Yokosuka, Japan, No. 1050, pp. 1-28, June 2003.

Mohammed, T.U., and Hamada, H., (2003). “A Discussion of the Paper - Initiation of Chloride-Induced Reinforcement Corrosion in Concrete Structural Members – Prediction, by Chun Qing Li, ACI Structural Journal, ACI Structural Journal, Vol. 99, No.2, March-April 2002, pp. 133-141”, ACI Structural Journal, Vol. 100, No. 1, January – February 2003, pp. 126-127.

Mohammed, T.U., and Hamada, H., (2003). “Progress of Macro-Cell and Micro-cell Corrosion of Steel Bars in Concrete Under Marine Environment”, Proceedings of the Sixth CANMET/ACI International Conference on Recent Advances in Concrete Technology, Bucharest, Romania, 2003, pp.63-77.

Mohammed, T.U., and Hamada, H., (2003). “A discussion of the paper – Influence of Pre-Rusting on Steel Corrosion in Concrete by P. Novak, R. Mala, and L. Joska, Cem Concr Res 31 (2001) 589-593” Cem Concr Res, Vol. 33, 2003, pp. 1103-1105.

Mohammed, T.U. and Hamada, H., (2002). “A Discussion of the Paper -Relationship between the Free Chloride and Total Chloride Diffusivity in Concrete by Lu, X., Li, Cuiling, and Zhang, H., Cem and Concr Res 32 (2002) 323-326”, Cem and Concr Res 33/3, March 2003, pp. 451-452.

Mohammed, T.U., Hamada, H., Yamaji, T., (2002). “Slag Cement – A Choice for the Long-term Durability”, Proceedings of the International Conference on Concrete in Marine Environments, Eds. Anh, N.D. and Braestrup, M.W., Hanoi-Vietnam, 6-10 October 2002, pp. 159-168.

Otsuki, N., Yokota, H, Hamada, H., and Mohammed, T.U., (2002). “Lifecycle Design for Durability of Offshore Concrete Structures”, Keynote Paper, Proceedings of the 1st fib Congress, Osaka, October 2002, pp. 65-84.

Mohammed, T.U., Fukute, T., Yamaji, T., and Hamada, H., (2002). “Long-term Durability of Concrete Made with Different Water Reducing Chemical Admixtures Under Marine Environment”, in Book “Concrete for Extreme Condition”, Eds. Dhir, K. R., McCarthy, M. J., and Newlands, M. D., Thomas Telford Publishing, UK, 2002, pp. 233-243.

Mohammed, T.U., (2002). “More Regional Cooperation for the Sustainable Development of Concrete Technology in the Asian Countries”, Technical Report of JCI, Special Overseas Section, Vol. 40, No. 2, February 2002, pp. 72-75.

Hamada, H., Mohammed, T. U., Yamaji, T., and Watanabe, H., (2001). “Long-term Performance of Concrete Under Marine Environment-Some Important Knowledge Obtained from Long-term Exposure Tests”, Technical Report of JCI, Vol. 39, No. 10, October 2001, pp. 17-24.

Mohammed, T.U., Yamaji, T., and Hamada, H., (2001). “Corrosion of Steel Bars in RC Structures Under Marine Environment Based on the Long Term Exposure Tests”, Technical Report of Port and Airport Research Institute, Japan, Vol. 40, No. 3, September 2001, pp. 38-56.

Mohammed, T.U., Yamaji, T., Aoyama, T, and Hamada, H., (2001). “Corrosion of Steel Bars in 15-year Old Pre-cracked Concrete Specimens Made with Ordinary Portland, Slag and Fly Ash Cements”, Proceedings of Japan Concrete Institute, Vol. 23, No. 2, 2001, pp. 571-576.

Yamaji, T., Mohammed, T.U., Aoyama, T, and Hamada, H, (2001). “Effects of Exposure Environment and Cement Types on Durability of Marine Concrete”, Proceedings of Japan Concrete Institute, Vol. 23, No. 2, 2001, pp. 577-582.

Mohammed, T.U., Hamada, H., (2001). “A Discussion of the Paper -Chloride Threshold Values to Depassivate Reinforcing Bars Embedded in a Standardized OPC Mortar – By C. Alonso, C. Andrade, M. Castellote and P. Castro, Journal of Cement and Concrete Research, Vol. 30, pp. 1047-1055, 2000”, Journal of Cement and Concrete Research, Vol. 31, No. 5, 2001, pp. 835-838.

Mohammed, T.U., Otsuki, N., Hamada, H., Yamaji, T., (2001). “Macro-cell and Micro-cell Corrosions of Steel Bars in Cracked Concrete Exposed to Marine Environment”, Proceedings of The 5th CANMET/ACI International Conference on Recent Advances in Concrete Technology, Singapore, July 29 – August 1, 2001, Supplementary Papers, pp. 155-169.

Hamada, H., Abe, M., Mohammed, T.U., Yamaji, T., Watanabe, H., (2001). “Long-term Performance of Concrete Under Marine Environment”, Bulletin of the Society of Seawater Science, Japan, Vol. 35, No. 2, April 2001, pp. 77-86.

Mohammed, T.U., Otsuki, N., Hamada, H., and Watanabe, H., (2000). “Several Issues in Designing Durable RC Structures”, Technical Report of JCI, Vol. 38, No. 11, November 2000, pp. 36-41.

Mohammed, T.U., Otsuki, N., Hisada, M., (1998). “Stirrup Corrosion in Uncracked Concrete with Chloride Ions”, The sixth Asia Pacific Conference on Structural Engineering and Construction, Taipei, Taiwan, Vol.2, 1998, pp.1295-1300.

Otsuki, N., Mohammed, T.U., and Hisada, M., (1998) “Corrosion of Plain and Deformed Steel Bars in Cracked Concrete”, Sixth CANMET/ACI International Conference on Recent Advances in Concrete Technology, Tokushima, Japan, Supplementary Volume, 1998, pp. 228-249.

Hisada, M., Otsuki, N., Amino, T., Mohammed, T.U., (1996). “The Influence of Some Factors on the Potential Difference and Electric Current in Reinforced Concrete”, Proceedings of the Japan Concrete Institute, Vol. 18, No.1, 1996, pp.825-830.

Mohammed, T.U., Otsuki, N., Hisada, M., Watase, H., and Nagataki, S., (1996). “Macrocell and Microcell Corrosion of Embedded Steels in Concrete with Chloride Ions”, International Conference on Urban Engineering in Asian Cities in the 21st Century, Bangkok, Thailand, Proceedings Volume 1, 1996, pp. D93-D98.

Mohammed, T.U., (1997). “A Study on Corrosion of Plain and Deformed Steel Bars With Respect to Bar Orientation and Cracks in Concrete”, Doctoral Thesis, Department of Civil Engineering, Tokyo Institute of Technology, Japan, September 1997.

Mohammed, T.U., (1994). “A Study on Nonlinear Liquid Sloshing in Rectangular Tanks”, Masters Thesis No. ST 94-16, Asian Institute of Tech., Bangkok, Thailand, April 1994.

Mohammed, T.U., (1989). “Computer Aided Analysis and Design of R.C. Framed Building Structures”, Undergraduate Thesis, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh, November 1989.

[1] Choudhury, M.R, Islam, M.S, Ahmed, Z.U. and Nayar, F. (2015), “Phytoremediation of Heavy Metal Contaminated Buriganga Riverbed Sediment by Indian Mustard and Marigold Plants”, Journal of Environmental Progress & Sustainable Energy, DOI 10.1002/ep.

[2] Choudhury, M.R, Islam, Dey, P. and Parshi, F.N.(2016), “Phytoremediation of heavy metal contaminated Buriganga riverbank soil by Vetiver grass (Vetiveriazizanioides)”, paper submitted to ‘Science of the total environment-An International Journal for Scientific Research into the Environment and its Relationship with Humankind’.

[1] Islam, M.S., Hossain, T.R., Parshi, F.N., Moles, O., Podder, R.K. and Caimi, A. (2015), “Disaster Resilient Rural House Designs for Different Geographic Regions of Bangladesh”, Proc. of Development and Democracy of Bangladesh: Current problems and prospects, UC, Berkeley, USA.

[2] Islam, M.S., Shahriar, B.A.M. and Parshi, F.N. (2014), “Bio-technical solution for dyke protection in saline zone of Bangladesh”, The 2014 Congress on Advanced in Civil, Environmental, and Materials Research (ACEM14), Busan, Korea.

[3] Islam, M.S., Parshi, F.N. and Shahriar,B.A.M. (2014), “Bio-engineering Technique for Climate Resilient Dyke Protection in the Saline Zones of Bangladesh”, National Conference on Natural Sciences and Technology (NCNST-2014), Asian University for Women, Chittagong, (Abstract).

[4] Islam, M.S. and Parshi, F.N. (2014), “Sustainable Earthen Housing in Disaster Prone Areas: Bangladesh Perspective”, 5th International conference of Sustainable build environment (ICSBE14), Srilanka, 243 (8 pages).

[5] Islam, M.S., Hoque, M.S., Mallick, S., Parshi, F.N. and Rahman, A.K.M.L.(2016), “Climate Resilient Slope Protection for Coastal Regions of Bangladesh Using Bio-Engineering Techniques”, 3rd International Conference on Advances in Civil Engineering 2016 (ICACE 2016), CUET, Chittagong, Bangladesh.

[6] Islam, M.S., Hoque, M.S., Mallick, S., Islam, T. and Parshi, F.N.(2017), “Performance Evaluation of Bio-Engineering In Slope Protection For Different Soils”, Proceedings, International Conference on Disaster Risk Mitigation,Dhaka, Bangladesh, September 23-24.

Mohammad M. Pasha, Ijaj M. Chowdhury, Ahmed A. Bhuiya, 2015 ‘University Students’ Perception on Public Transit in Dhaka City’, World Academy of Science, Engineering and Technology, International Journal of Social, Behavioral, Educational, Economic, Business and Industrial Engineering; vol. 9, no 10, pp. 3378-3381.

Dhakal, N., Bashar, M. Z., Elseifi, M. A. (2019) Guideline for detecting top-down cracks in in-place flexible pavements. Tran-SET annual conference 2019, San Antonio, Texas

Momen, M., Elseifi, M. A., Bashar, M. Z. (2019) Use of LTPP Data to Quantify Moisture Damage Under Crack Sealing and Surface Treatments in Asphalt Pavements. Tran-SET annual conference 2019, San Antonio, Texas

Bashar, M.Z., Elseifi, M.A., Mousa, M., Zhang, Z., Gaspard, K. (2018). Performance and Cost-Effectiveness of Chip Seal in Louisiana. Transportation Research Board 97th Annual Meeting, Washington, D.C.

Bashar, M.Z., Elseifi, M.A., Mousa, M., Zhang, Z. (2018). Non-Destruction Detection of Moisture Damage in Pavements Using Ground Penetrating Radar. 2018 Tran-SET conference, Transportation Consortium of South-Central States, New Orleans, LA.

Elseifi, M.A., Mousa, M. R., Bashar, M. Z. (2020) Improving the Use of Crack Sealing to Asphalt Pavement in Louisiana. Research Report, Louisiana Transportation Research Center, Baton Rouge, LA.

Ibrahim, K. B. M., Haque, T., Tanim, M. F., Raihan, M. A., & Hossain, M. (2022). Assessing Travelers’ Characteristics and Trip Information Influencing the Boarding and Alighting Experience at Bus Stops in a Developing Urban City: A Simultaneous Bivariate Ordered Probit Approach. Case Studies on Transport Policy.

Title: Stability evaluation of slope ground; Date of Application: February 24, 2009, Application no: Patent 2009-040597; Date of Acceptance: September 9, 2010, Publication no: Patent 2010-196306; The present invention relates to provide a ground stability assessment method that can accurately evaluate the stability of the ground during construction and after construction or excavation of slope ground.

Business and Technology Management

Al Mamun, M.A., Azad, M.A.K., Mamun, M.A.A. et al. Review of flipped learning in engineering education: Scientific mapping and research horizon. Education and Information Technology (2021). [Indexed in WoS]

Mumu, J. R., Saona, P., Mamun, M. A. A. & Azad, M. A. K. (2021), "Is Trust Gender Biased? A Bibliometric Review of Trust in E-Commerce", Journal of Internet Commerce, pp. 1-29, online published May 22, 2021. [Indexed in WoS, Scopus, ABDC]

Mamun, M. A. A., Hassan, M.K., Azad, M. A. K., Mamunur, R. (2021) “A Hybrid Review of Islamic Pricing Literature.” The Singapore Economic Review [Indexed in WoS and Scopus].

Mamun, M. A. A., Strong, C. A., Mumu, J. R., & Azad, M. A. K. (2022). Mapping the integrated marketing communications research: A bibliometric analysis. International Journal of Marketing, Communication and New Media, 10(18). [Indexed in WoS]

Rahman, A., Ahmed, T., Daiyan, A. I., & Mamun, M. A. A. (2022). Impact of Intermediary and Seller Trust on Consumer Repurchase and E-WOM Intentions: Demographics Moderating Trust Transference. Journal of Electronic Commerce in Organizations, 20(1), 1-19. [Indexed in WoS]

Islamic University of Technology

Islamic University of Technology

Boardbazar , Gazipur

Bangladesh

Call : +8802 99669 1254~59 | Fax : +8802 99669 1260

©All rights reserved by IUT